Condition: used, Leitz HM - IV 66 window set with faceplate and front door set. Sold in "as is" condition, tool has not been resharpened, Ksdpshzgy Nefx Ag Ujll ex location Seevetal, without transport, subject to prior sale,

Condition: used, Tenoning spindle 1 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and milling carriage ..... Machine still in operation available for viewing! Optionally available with used tools and window design software for data transfer to the Unicontrol 12! Technical Data Summary (Please inquire about any additional accessories included) ..... Crosscut Saw ..... > Electronic crosscut saw, continuously adjustable horizontally > Number of tools: 1 > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut > Axial adjustment range: 150 mm, electronically continuously adjustable NC axis > Radial pneumatic adjustment range: 8 positions, e.g., for edge rounding from above Rounding Unit ..... > Position: horizontal, below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment range mechanically coupled to the cross-cut saw. > Radial adjustment pneumatically controlled on/off Electronic length stop ..... > Length 4,100 mm 1. Tenon and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing Kjdpfx Aoxwdv Ieg Ujll > Axial adjustment range: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Follow-up counter, the entire clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing area, including double part separation before the infeed of the longitudinal processing area. 1. Profiling spindle (up- and down-axis rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, continuously variable NC axis > Radial adjustment range: 80 mm, continuously variable NC axis > Spindle speed: 6000 rpm > Minimum tool travel circle: 140 mm > Maximum tool travel circle: 232 mm > 2 feed rollers, pneumatically controlled axially opposite the spindle, 8 positions 2. Profiling unit (grooving unit from above) ..... > Position: horizontal, top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm 8 positions > Radial travel 125 mm, 8-station turret > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm 3rd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm, continuously variable NC axis > Radial travel 80 mm, continuously variable NC axis > Spindle speed: 6,000 rpm > Minimum tool travel: 140 mm > Maxi...

Year of construction: 2001, condition: good (used), table diameter 200 mm workpiece height 100 mm number of wheels 1 Control Robot CNC total power requirement 6 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 Kledott Tb Depfx Ag Uel [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - Fire protection device CONTROL axes; 4 axes + 2 programmable robots - simultaneously linear interpolation of the 4 axes + cylindrical interpolation of 2 robot axes

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 5000 kg This HRB HRB-1450F was manufactured in 2021. A robust laminating press, it handles a maximum sheet size of 1450 × 1200 mm and operates at speeds up to 6,000 sheets/hour. Powered by a 380V / 50Hz supply and weighing approximately 5,000 kg, it remains in excellent condition and is still in production. If you are looking to get high-quality laminating capabilities, consider the HRB HRB-1450F machine we have for sale. Contact us for more information. Klodpfsx R E Rcjx Ag Ujl Application Types Pressing / Laminating

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Kjdpfoif Az Ujx Ag Usll Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 100 mm Z axis - 105 mm 1 drilling unit horizontal (dowel drilling unit left) Drilling motor 380 V, 1,100 W Clamping chuck d = 8/10 4,000 - 11,000 rpm can be adjusted 1 drilling unit vertically from above - fixed Drilling motor 1.1 KW, 3,000 rpm Quick change of the drill head 1 drill head BKF 2/3, quick-changeable, (corner bearing) Klodpfx Agod Ih Hye Uol On the loose part, hardware according to customer requirements including drill replacement Control: electro-pneumatic with three axes NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE compliant, with 1 set of drilling tools Dübo je 1xd = 6,8,10,14 + 2 Roughing cutter d = 16, 1 milling cutter d = 20, ready for connection 1 drill head BKF 3, fast exchangeable for olives including drill bit Fitting according to customer requirements 2 drilling units 1 x horizontal for drilling from above (for tapes) 1 x vertical for dowel work, right Drilling motor 1.100 Watt, infinitely variable 4,000 - 11,000 rpm with collet chuck ER 20 2 Milling units for lock boxes 1 x horizontal for tapes, lock boxes 1 x vertically from above for PZ, pushers, tapes Milling motor 2.2 KW Speed ??adjustable 3,000 - 16,000 rpm Clamping tool holder ER 25 1 length stop right and left, working length 2.8 m NC-controlled When the length stop is used, the fixed stops are removed. Dimension: LxBxH = 2.50 x 1.50 x 2.20 m - Weight machine 850 kg PowerDrill LxBxH = 0,30 x 0,30 x 6,00 m - Weight length stop 100 kg 1 Dübelleim- and press-in station consisting of: - Swing conveyor for dowels with feed -Dübeleinpressstation -High pressure glue pump made of stainless steel with glue container - Full jet valve for precise glue application Exhaust nozzle Price for 1 dowel diameter The basic machine will be about 300 mm longer (Technical data according to manufacturer - without guarantee!)

Condition: new, Number of motors 2 Stück 0 2650 mm Control manuell Ruchser RU-GLS-ED 45° glazing bead saw ----- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw can be adjusted manually to size. The Machine was designed for cutting glazing beads in pairs with one Cutting angle of 45° developed and has a fixed and a movable saw unit. The manual length adjustment is equipped with an electric digital display. Cutting lengths of 150 mm - 2650 mm can be achieved be sawn. During the cutting process, the glazing beads are with a pneumatic tensioning device from above and from the front to prevent tipping of the glazing beads. It is operated via a safety Two-hand operation. Saw blade diameter 250 mm, length 3700 mm, width 700 mm, Voltage 400V Pos. 1: RU-GLS-ED45° double glazing bead saw ----- with manual measurement adjustment, for pairs Cutting glazing beads, cutting angle 45°. Manual length adjustment with electric Digital display, cutting length from 150 - 2650 mm. Pneumatic clamping device from above and from in front. Safety two-hand operation, saw blade diameter 250 mm, length 3700 mm, width 700 mm, Voltage 400V ----- Basic price in the above version: on request! ----- Ex works. Plus packaging and shipping as well as current Material cost surcharge of 6% of the total price Options with additional costs: ----- Item 1.1 Set of inserts for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request, after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of inserts are required. To determine the exact number In order to be able to do this, we need profile drawings before order confirmation the glazing beads to be used. Additional charge: on request, after sending your glazing bead drawings Pos. 1.2 Recording device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Kledpfxexmk Dqs Ag Uel Additional price: 611.00 euros Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 478.00 euros Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 428.00 euros Pos. 1.5 Operating time switching device for independent suction. Adjustable from 5 seconds. up to 3 hours. With every sawing process automatically becomes the set time sucked off. Will be used again within the suction time sawn, the set suction time begins again from the beginning. Additional price: 702.00 euros Item 1.6 1 set of carbide saw blades RU-GLS-P45 and RU-GLS-ED45° D = 250 mm x 3.2/2.2 x 30, 80 teeth, each consisting of 1 piece of saw blade L6444(right) and L6443, (left), with special grinding 43°. Additional price: 576.00 euros ----- All prices in euros, net, plus statutory. VAT (technical information according to the manufacturer, without guarantee!)

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm # 2809 Weinig Unicontrol 6 ----- Technical Specifications Summary (Please inquire about any additional accessories included) Item 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut CNC-controlled length stop ----- > Length 3,500 mm > Electronic length stop including positioned crosscut saw Item 2: Tenon and slotting spindle ----- > Number of tools: 3 (stroke 2 x 100) mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Max. tool travel circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st profiling spindle (straight and counter-rotating) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool travel circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool travel: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-parted muntins) Muntin guide consisting of: Muntin support bar from above in the area of ??the profile milling unit vertically on the right and the profiling spindle. Item 5: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Tool travel radius max. 130 mm > Axial adjustment range: 30 mm, 2 positions > Radial adjustment range: 125 mm, 4 positions, manual Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions via pneumatic turret > Radial adjustment range: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool travel radius Max.: 210 mm > Motor power: 3.0 kW Other features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamp > Rebating device for tear-free rebating > Double parts package > Return conveyor for one-person operation: swivel belt > Screen control > Sloped window device > Electronic angle display for sloped windows > Industrial PC, with Windows PC control/NEXUS Kodpfx Agjxtvgko Ujll Extraction nozzle diameter: ----- Crosscut saw 80 mm Slotting spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Top grooving device 80 mm Fitting spindle 120 mm ----- Pr...

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale! Kedexq Hkuepfx Ag Uell

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using lateral stops or templates at a 1:1 ratio Pneumatic copy pin, two-stage, for two different cutter diameters The patented suspension of the copying lever ensures precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via spindle lock Pneumatic material clamping device Metering spray unit Options: Copy templates milled for standard handle holes and PZ milling Copy pin Collet chuck Stop system Kjdsxqihijpfx Ag Ujll Material clamping device with 2 clamping cylinders Milling cutter 8 mm Availability: short-term Location: Flörsheim

Condition: used, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers Kedpfx Agovu Hgbo Ujll - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: used, Year of construction: 1998, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 GUBISCH – CENTROMAT CW 2 will be sold on behalf of our customer, ex location ----- Manufacturer description: ----- For window and door production, with 50 mm spindle diameter in longitudinal profiling. With the following processing stations and options: - Slotting machine on one side for straight and angled connections Milling machine for longitudinal profiling - Rebating operation with synchronous milling unit and automatic plunge. Pivoting frame support up to 650 mm - Central control 1.0 cross-cut saw automatically plunges from above ----- Motor power, including motor brake: 3.0 kW Spindle speed: 2,800 rpm. Cutting circle diameter: 350 mm diameter Spindle diameter: 30 mm diameter Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter Pneumatic vertical stroke: 100 mm Pneumatic horizontal stroke: 160 mm against 2 manually adjustable 6-way turret stops Chip extraction hood with extraction nozzle 100 mm diameter 2.0 slot unit ----- Motor power, including motor brake: 9.2 kW Spindle speed: 3,800 rpm Flight circle diameter: 320 mm diameter Spindle diameter: 50 mm diameter Usable spindle length: 320 mm Pneumatic vertical stroke fixed: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with extraction nozzle: 160 mm diameter 3.0 Slotting table ----- Table height above floor 920 mm Feed for 4 speeds freely adjustable: - 1. Milling, slanting window and typing speed can be set in the table (approx. 7 m/min.) - 2. Sawing speed approx. 7 m/min. (can be set on the device) - 3. Transfer speed approx. 10 m/min. (can be set on the device) - 4. Return speed/without processing approx. 25 m/min. (can be set on the device) - Motor power, including motor brake 0.37 kW Workpiece clamping pneumatic Pendulum pressure shoes Workpiece clamping pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter wood device Counter wood changer with 2-way automatic change and then with manual. Rotation of 180 degrees, 2 further counters possible, which then also counter in automatic mode 3.2 Length stop ----- - Stop system with 3 scales for - a) outside frame - b) outside sash upright - c) outside sash crosswise Adjustment manually - Length with attachable extension 3000 mm Kledpfx Agew I Eawj Uol - for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer - automatic via vertically clocked feed roller in the milling feed 4.0 Milling machine For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- - Counter-rotation - Synchronous rotation with automatic plunge can be used for rebating - Motor power including motor brake: 9.2 kW - Spindle speed: 6000 rpm. - Cutting circle diameter: 240 mm max. - Spindles adjustable for zero diameter 140 mm max. - of tools 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm diameter - Spindle usable length: 320 mm - Vertical stroke pneumatically fixed, - suitable for 4 tool sets of 80 mm each, 3 x 80 mm - Horizontal stroke pneumatic: 80 mm - Chip e...

Condition: new, Year of construction: 2026, Drilling machines for bottom hinges and window handles for precise and efficient drilling of windows. Short introduction: • Accessory kit for bottom hinges • Drilling pattern according manufacturer (e.g. G-U, Roto , Maco, Siegenia Aubi, Winkhaus ... and other manufacturers) • Accessory kit for window handles • Massive precision drilling unit from GANNOMAT Klsdpfx Asdx R Hcsg Uol

Condition: new, Year of construction: 2026, Drilling machines for bottom hinges and window handles for precise and efficient drilling of windows. Short introduction: • No setup times between drilling of bottom hinges and window handles • The advantages of drilling from underneath • Accessory kit for bottom hinges • Drilling pattern according manufacturer (e.g. G-U, Roto , Maco, Siegenia Aubi, Winkhaus ... and other manufacturers) Klsdpfx Aedx R Hzeg Ujl • Accessory kit for window handles • Massive precision drilling unit from GANNOMAT

Condition: good (used), Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Kodpfx Aexvxpgeg Ujll Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Klsdpfx Aet R T Hcsg Uel Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, Year of construction: 2005, functionality: fully functional, length stop: 3,200 mm, tool diameter: 400 mm, spindle diameter: 50 mm, spindle stroke: 640 mm, spindle speed (max.): 3,000 rpm, milling spindle length: 320 mm, saw blade diameter: 400 mm, height adjustment type: electric, type of input current: AC, working height: 130 mm, working width: 200 mm, SCM Windor 60/100 – Angle Processing Center Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The system in question is a window and door production line of the type Windor 60/100 from the manufacturer SCM Group, built in 2005. It is a CNC-controlled angle processing center designed for the industrial machining of frame and sash components. The system is configured for series production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angle Processing Center The SCM Windor 60/100 features a modular design and is configured as an angle processing unit. Machining takes place on a tenoning side and a profiling side positioned at right angles to each other. The system combines several machining steps – such as milling, drilling, grooving, rebating, and tenoning – in a fully integrated, CNC-controlled process. Key Features: * CNC multi-sided machining * Multiple milling and processing spindles * Automated tool handling and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Center The Fleximat drilling center is integrated into the system and is used for the precise execution of boreholes for joints and fittings. Machining is CNC-controlled with both vertical and horizontal drilling units. 2.3 Profiler Center The profiler center is designed for contour-forming milling operations and consists of two processing sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour processing Left side: * 24-position tool changer * Automatic tool changing to minimize setup times * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding, serving to improve the surface quality of the processed workpieces. 3. Control, Operation, and Safety The system is equipped with a CNC control unit that manages all machining operations, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are state-of-the-art as of the time of construction (2005) and include, in particular: * Mechanical guards and enclosures * Emergency stop devices * Safety locks on moving machine parts Kledpox Nqqxofx Ag Ujl 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, provision has been made for a SCM Topset XL planer with 10 spindles. This machine will be operated as a standalone processing station at a separate location within the production hall and is not directly integrated into the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transportation are to be organized by the buyer. Available from 07.01.2026

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: IMBDS63-52-10-45-2/SP/DC/SB, workpiece weight (max.): 120 kg, working height: 2,850 mm, power: 35 kW (47.59 HP), air demand: 24,000 m³/h, compressed air connection: 6 bar, The existing window coating line was in full operation until December 19, 2025. The system is currently still connected to the electrical supply network but will be replaced by a new robotic coating system over the turn of the year. The objective is to find a suitable subsequent user who will professionally dismantle and remove the complete system on their own responsibility at the beginning of the coming year. System Concept Description Loading and unloading of traverses with window frames and sashes takes place via a lifting/lowering station, which allows for ergonomic and process-safe feeding of the system. Impregnation and priming of the workpieces is carried out in a vertical flooding booth. The coating application is performed using the flooding process via vertically arranged coating nozzles. This is followed by a drip-off and drying zone, where the traverses are guided in an inclined position. The first drying tunnel has a buffer capacity of approx. 40 traverses. Drying is achieved by means of warm air generated from a hot water system with a supply temperature of approx. 85°C. A switching unit enables workpieces to be routed either to a second impregnation/priming stage or directly to the subsequent coating section, as required. The coating section consists of a lifting stand with integrated electrostatic application (E-Statik). Coating is performed on one side only, supplemented by an automated turning unit, allowing workpieces to be returned to the spray system for a repeat coating pass. The second drying tunnel enables buffering of approx. 50 traverses. Here as well, drying is by warm air supplied by a hot water system at approx. 85°C. Kledpfxex Npzcj Ag Ujl A buffer section after the second drying tunnel with a capacity of about 25 traverses serves as a transfer area to the unloading station.

Condition: excellent (used), Tool OERTLI for SCM WINDOR IV 70 MM wooden window Klsdpfx Ajhmpn Hjg Uel IV 95 MM wooden window Wood Alu 70 MM More pictures/ sketch on request

Year of construction: 1987, condition: excellent (used), Automatic rebating machine Kledpfx Asf Upzhsg Ujl WEINIG UNIVAR 10

Condition: used, Year of construction: 1969, Used machine Year of manufacture: 1969 Runs perfectly Max. working width: 170 mm Max. working height: 130 mm Kodpfjxavtqjx Ag Usll 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top Availability: short-term Storage location: Röllbach

Condition: used, Number of boring spindles 3 St. Number of tools 1.3/4.1. St. Spindle diameter 50,40 mm Spindle length 120,320,125 mm weight 2500 kg loading dimensions L x W x H 3800x1400x2000 mm table length 3470 mm Weinig Univar 6 P to be sold on behalf of our customer ----- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body made of heavy, torsion-free and vibration-damping elements. Stops on the right in the profiling area made of Pertinax. Before Profiling spindle a split stop with sliding bar for short parts. Additional opening rail for large format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blow-off device for feed rollers and table. Spindles, hood: Spindles with high concentricity and dynamically balanced. Extraction hoods designed for the cheapest chip flow. Easiest tool change Quick-opening hood lid. Machine operation, setting aids: Operating the machine from the front. Setting the stops for Tool diameter using mechanical number display. Machine electrics, motors, controls: Electrical design according to DIN VDE 0113 - Electrical equipment from Industrial machines EN 60204 IEC 204-1. Further electrical regulations are not taken into account. Engines dynamically balanced. Klodpfxsxpi Ele Ag Uol Control of tool positions via selector switch on the control panel. Tools: Machine equipped with operating tools, but without Editing tools. SPINDLE 1 Synchronous spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 120 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10 mm Motor strength: 4 KW (5.5 KW) SPINDLE 2 Number of tools: 4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50mm/35mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Tool diameter max. For zero diameter 112 mm: 210 mm For zero diameter 140 mm: 232 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed: 1.1 KW Feed profiling unit: continuously 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Special equipment: 3 Mechanical spindle brake for synchronous spindle, profiling spindle and Additional aggregates SPINDLE 3 1 fitting milling unit, right: for milling the fitting groove in the Milling pass or for groovi...

Condition: used, Year of construction: 1993, ANGULAR PROFILING MACHINING CENTER Brand: SAC Model: P4 Serial number: 9304 Year: 1993 Model: F5 Serial number: 93030 Year: 1993 Machines visible in our workshops CHARACTERISTICS : - Cutter rotation speed: 6000 rpm Klsdpfx Agorx Tcge Uol

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, length stop: 4,500 mm, tool diameter: 400 mm, spindle speed (max.): 6,000 rpm, controller model: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontally adjustable, infinitely variable) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment: 150 mm NC axis, electronically infinitely variable Radial adjustment: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontal bottom Axial adjustment: together with cross-cut saw Electronic length stop Length: 4,500 mm 1st & 2nd tenoning and slotting spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter-bearing Axial adjustment: 580 mm NC axis, infinitely variable Tailstock counter (entire clamping length is counter-supported) 1st & 2nd profiling spindle Position: vertical right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter-bearing Kledpfxjxp U N Ns Ag Ujl Tool swing diameter: min. 140 mm Tool swing diameter: max. 232 mm Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Profile milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment: 30 mm NC axis, infinitely variable Radial adjustment: 125 mm NC axis, infinitely variable Spindle speed: 9,000 rpm Tool swing diameter max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter-bearing Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Spindle speed: 6,000 rpm Tool swing diameter min.: 140 mm Tool swing diameter max.: 232 mm 5th profile milling unit (hardware spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment: 115 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 210 mm 6th profile milling unit (grooving unit from above), in auxiliary stand Position: vertical right, operating from above Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment: 100 mm, 8 positions via pneumatic turret Radial adjustment: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool swing diameter max.: 180 mm 7th profiling spindle (grooving unit from below) in auxiliary stand Position: horizontal bottom Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment: 100 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 200 mm MACHINE DETAILS Slotting spindle: 2 pcs. Number of milling units: 7 pcs. Control: Weinig PC-Nexus Weinig Unicontrol 12 INCLUDING used window tooling OERTLI IV 68, IV 78 wood and wood-aluminium Additional features can be found in the attached document! Note: The machine has already been properly dismantled.

Condition: good (used), Double Miter Saw Rapid DGS – used, fully functional, ready for demonstration For sale is a Rapid Double Miter Saw DGS in well-maintained, working used condition. The machine is immediately ready for operation and can be demonstrated at any time. Features / Specifications: Model: Rapid DGS Precision double miter saw suitable for aluminum, plastic, and, if applicable, light metal profiles Sturdy, robust construction Miter cuts possible (both saw heads adjustable) Clean, technically flawless used condition Condition: The machine is in full working order. All functions can be tested live during an inspection. Viewing & Collection: An inspection by appointment is possible. Collection by the purchaser – assistance with loading can be provided if required; crane and forklift are available. Klodpfx Asxzdvijg Uel Price: Negotiable If interested or if you have further questions, please get in touch!