Condition: new, table length 2000 mm table width 1000 mm table height 920 - 1000 mm 2000 kg height of stroke max. 1525 mm Cslq Ev Ajvu Hahsaogt total connected load 1,5 kW connected load frequency 400 V weight of the machine ca. 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement.

Condition: used, Year of construction: 2003, table length 5040 mm table width 1550 mm 12 mm plate weight max. 330 kg travel -x axis 2520 mm travel -z axis 300 mm travel -y axis 1550 mm cutting speed 20 m/min feed speed X/Y/Z 80/80/60 m/min positioning accuracy +-0,01 mm/500 mm mm repeatability +/- 0,005 mm Cgjlq Ev Asvxwyteast table height 820 mm size of opening 550x1550 mm compressed air 6/20 bar total power requirement 10 kW weight of the machine ca. ca. 6,5 t dimensions of the machine ca. 2,5x5,7x2,3 m Turbo blower replaced at 36,000 hours Compressed air dryer Alphapac 0015 SP Basement flue gas extraction type Vario T 1.5A Air conditioning unit RIEDEL PC 315.21-NE-LAS Laser radiation within class 1 The machine was regularly serviced

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, type of input current: AC, overall weight: 45 kg, input voltage: 230 V, total width: 4,064 mm, total length: 7,366 mm, total height: 6,604 mm, filter area: 5 m², suction capacity: 180 m³/h, pressing: 36,000 Pa, power: 1.5 kW (2.04 HP), The device has seen little use and is in very good condition and fully functional. Specifications The ClearO2 W100 is designed to complement the 8XE MIG and 8XR MIG cobot extractors from Translas. With the combination of the welding fume burners of the 8XE MIG and 8XR MIG cobot extractors and the ClearO2 W100 devices, we capture between 90% and 98% of the welding fumes at the source and filter them with an efficiency of > IFA 99.8%. The compact device is perfect for relocation in the workplace due to its low weight - only 45 kg - and its four wheels, two of which are lockable. Automatic cleaning The ClearO2 W100 device has an automatic cleaning function by reverse compressed air pulse. As soon as the negative pressure in the filter is too high, the device automatically starts cleaning the filter. A manual cleaning function can be performed by pressing a single button. The automatic start/stop function to save energy and synchronize the device with the 8XE MIG and 8XR MIG Cobot extraction units is standard on the ClearO2 units. As soon as the gun is removed from the specially designed torch holder, the machine starts working automatically. Continuous duty motor The unit's electric motor is designed to work continuously without losing power. Thanks to the automatic cleaning function and simplified motor system, the maintenance of the unit is minimal, making it durable and time-saving. With a filter area of 5 m², this is one of the most efficient units of its size with the largest filter. The filter is disposable and has an active surface with an efficiency of: IFA >99.8%. Lightweight and mobile Cjlq Eevpgkcev Aajgt The ClearO2 W100 units are designed to meet the needs of a single welder who needs to change his workplace. Examples of such applications include shipbuilding, wind tower construction, tank building and other similar manufacturing industries. The four wheels with two locks and the low weight - only 45 kg - allow the welder to easily move the device to the next work location. [Source: translas]

Condition: excellent (used), Plasma cutter SAF Nerta Zip 20-40 A Type 0408_2240 380 Volt 10/18 A 220 Volt 16/30 A Cutting current 20/40 A Transport dimension : Length 700 mm width 430 mm Celqsvdqkvo Ev Aaegt height 970 mm Weight 90 kg

Condition: new, Year of construction: 2024, Functionality: fully functional, ground cable length: 5,000 mm, warranty duration: 24 months, welding current at 60% duty cycle: 273 A, welding current at 100% duty cycle: 212 A, protection type (IP code): IP23, welding current (min.): 30 A, welding current (max.): 300 A, OTC CPTX-i 300C Package Including: OTC CPTX-i 300C Parweld SB250 3 Meter Welding Gun 5 Meter 50mm² Ground cable with Clamp Dutch 10 Liter Mix Gas Dutch Pressure Regulator MG2 15kg 0,8 of 1,0mm Steel Welding Wire TBi ArcVisor Clarc Parweld Panther Pro Welding Gloves With Free Magnetic Mig Welding Gun Holder and Sirius Wire Cutter. Also available without Gas Bottle & Pressure Regulator. Cjlq Esupkm Dov Aaegt Test welding is possible. A video of the machine is possible in welding condition. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside of Europe with Europallet per frieght. All machines have been checked and are in 100% working condition The pictures above show the real machine. Also available with welding wire, pressure regulator, and other accessories. We are also the right address for the repair of your old welding machines. We can also offer you other types of machines, for example: New, Used, Mig/Mag, Co2, Tig, Pulse, Ac/Dc, Synergic, Watercooled, Electrode and Plasma. Brands that we can offer you: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. See also our other advertisements and our webshop. Due to the time we allow our customers, you can only visit us on appointment to view and order welding equipment. You negotiate at all times with Cjays Welding Equipment itself and never with third parties.

Condition: used, machine/vehicle number: 000150000222, welding current max. 260 A 260 A at 60 % ED 201 A at 100 % ED remote control SELCO RC08 space requirements length - 560 x width - 240 x height - 400 mm weight approx. 37 kg Cgjlq Esf Sa T Usv Aaot

Condition: excellent (used), Year of construction: 2016, operating hours: 8,732 h, Functionality: fully functional, machine/vehicle number: 90-12-19-00, laser power: 95 W, laser wavelength: 1,064 nm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 300 mm Y-axis: 300 mm Z-axis: 500 mm B-axis: ± 120° C-axis: 360° TruPulse 103 laser parameters Laser power on the workpiece: 95 W Max. Pulse peak power: 5 kW Beam quality: 12 mm-mrad Wavelength: 1,064 nm Pulse duration: 0.3 ms - 50 ms Max. Pulse repetition frequency: 833 Hz Max. Pulse energy: 30 J Min. diameter of laser light cable: 300 µm Type of laser light cable: LLK-B Max. Axis speeds Axis speed parallel to axis in X: max. 6 m/min Axle speed parallel to axis in Y: max. 6 m/min Axis speed parallel to axis in Z: max. 6 m/min Simultaneous axis speed: max. 10 m/min Axis speed B-axis: max. 15 1/min Cslqjuwrz Te Ev Aajgt Positioning accuracy Linear axes (X, Y, Z): 0.1 mm Rotary axes (B): 0.1° Repeat accuracy Linear axes: 0.03 mm Rotation axes B, C: 0.03° Work table clamping surface X-Y cross table: 390 mm x 300 mm T-slots basic table: 600 mm x 375 mm Rotary axis C125 Turntable diameter: 125 mm Diameter center passage: 61 mm Speed: 200 1/min, 150 1/min Positioning accuracy: 0.2° Mass moment of inertia: 0.02 kg-m², 0.04 kg-m² MACHINE DETAILS CNC control: TRUMPF control system based on a B&R control system Ambient temperature: 5°C - 43°C Connection and consumption Electrical connection (voltage): 380 V - 460 V Electrical connection (frequency): 50 Hz - 60 Hz Type. Power consumption at rated output: 3.8 kW Cooling: Water-water Design Dimensions (W x H x D): 980 mm x 1,220 mm x 505 mm Weight: 230 kg Max. Max. number of laser light cables: 3 Protection class (water cooling): IP54 Ambient temperature (water cooling): 10°C - 40°C EQUIPMENT - TruPulse 103 - Rotary axis C125 with rotary feed-through - Coolant tank (with pumps) - Internal coolant supply (IKZ) - Chip conveyor - Touch probe tool: Renishaw, incl. tactile measuring probe - Parts removal - Status ramp - Line laser - Counter spindle prepared for pneumatic chuck - Large number of driven tool holders - Large number of fixed tool holders

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 35 h, Functionality: fully functional, Waterjet cutting system 1020 EcoCube 2D Demonstration system, fully serviced, tested and ready for operation, Maximator JET certificate Availability: within one week High-pressure pump: optional after consultation and availability, e.g. SERVOTRON 40.45+, year of manufacture 2018, complete Maximator JET retrofit Year of manufacture of cutting table: 2022 Operating hours of cutting table: 35 h • Effective cutting area 1,000 x 2,000 mm • CNC control NUM FLEXIUM • Z-axis CNC clear height 100 mm with Quick-UP • Automatic height sensing and collision protection • Laser for position determination • LED work area lighting • Cutting valve including abrasive cutting head • Ergonomic control panel • HP operator PC with 20 inch LED screen, splash-proof keyboard and Mouse • Water jet software SmartCut powered by IGEMS • Abrasive dosing unit CNC with intermediate container • Abrasive storage container 450 kg with mini hopper pressure conveying system • High pressure connection between pump and cutting head • Safety system with automatic lifting door • Stop edge in X and Y • Guarantee 1 year or 2,000 operating hours Price ex works plus VAT €125,000 Additional services  2D training, system operation for up to 4 people on site at the customer's premises, 2 days €2,400  Installation and assembly up to 400 km one way, 2 days €2,400  Transport according to current daily price approx. €1,600 Subject to changes and errors in the technical data and prices. Cgjlq Ev Aov Dfxzoaot Subject to prior sale. Payment conditions  100% after delivery, commissioning and acceptance on site

Condition: good (used), Year of construction: 2022, machine/vehicle number: 22001235, Offer 24576 Technical data: - mobile version with articulated extraction arm - air volume flow approx. 950 m³/h Cslq Ev Asvzrkxsasgt - max. negative pressure 2800 Pa - filter area 10 m² - filter control light for filter change - articulated extraction arm with gas pressure dampers 3000 mm - drive 230 V / 1.3 kW space requirement approx. W 900 x H 1250 x D 750 mm - weight approx. 110 kg

Condition: excellent (used), CONTEC-COMPRESSORS Cgolq Ev Aefnbgrsaet SELCO ETG 602, TIG + ELECTRODE MAXIMUM WELDING CURRENT 600 A, 2-TACT, 4-TACT, TOUCHLESS HF, REG TIME OF THE CURRENT DROP. NET PRICE 3500,- GROSS PRICE 4305,- THE WELDER IS FULLY OPERATIONAL. CONTEC-COMPRESSORS

Condition: new, Technical specifications Two-phase mains voltage : 400 V. Mains frequency : 50/60 Hz. Max. puncture current : 9700 A. No-load voltage MAX : 2,6 V. Thickness MAX tacking 2 sides : 3+3 mm. Max electrode force : 190 daN. Arms projection : 330 mm. Cgslehzg Ihoq Ev Aaot Nominal power X=50% : 22 kw. Nominal power X=50% : 15 kw. Power factor : 0.7 (cosphi). Intermittence ratio : 15%. Dimensions : 79 - 32 - 128 cm. Weight : 118 kg. Resistance welder (tacking machine) with column, swinging arm, with digital microprocessor control. The multifunction LCD digital panel allows to operate: in EASY mode (setting of current and tacking time); in EXPERT mode (setting of different tacking parameters) with the possibility to save up to 20 customized programs. Continuous and pulsed operation guarantees excellent welds on various types of steels. Features: adjustment of the welding current (%), welding time (cycles), pressure and speed of electrode closing choice of various welding cycle parameters (approach time, ramp time, welding time, pause time and number of pulses) easy-to-read LCD display pneumatic drive thermal protection with signaling air flow regulation for the slowing down of the arms closure Model requires cooling

Condition: as good as new (ex-display), Year of construction: 2020, CMS Tecnocut Easyline Cutting Area / Axis Movement X-Axis: 2.000 mm Y-Axis: 4.000 mm Z-Axis: 150 mm C-Axis: Optional B-Axis: Optional Options: - 5-Axis cutting head - additional cutting head - Sanddoser - Dredge for abrasive - Antikollisionsfeeler - CAD/CAM IGEMS Cgslqod I D R Ts Ev Aajt

Condition: excellent (used), Stud welder Make TRW. Nelson Type Alpha 850 YEAR OF MANUFACTURE 1995 Cgjlq Ev Aovcl T Asast maximum welding capacity studs up to 12 mm welding current continuously adjustable from 100 - 850 A supply voltage 400 Volt , 32 A Transport dimension : length 550 mm width 320 mm height 380 mm

Year of construction: 2022, Condition: new, PLASMA suction and filter system FILTERBLOC - TFK PL Series Special central exhaust and filter system for plasma smoke during cutting and burning of the FILTERBLOC TFK PL series TUeV certified manufacturer according to DIN EN ISO 15012 and CE drawing FILTERBLOC - TFK PLASMA 40/60/80 Engine power 5,5/7,5/11 KW Air volume 4000/5500/6200 m3/h Cgjlq Ev Asbrad Eeaet Filter area 124/186/248 m2 dust container 4x/6x/8x 84 litres Automatic jet cleaning System with test for welding smoke class W3 12 months warranty The price quoted refers to the TFK PL 40 further information on request

Condition: excellent (used), Year of construction: 2017, Programmable focusing optics Manufacturer: Trumpf Type: PFO 33-2 R1030-1070 HA Year of manufacture: 2017 f: 255 Q γ: 1030 nm D33 Cgolq Evotrl Sgo Aaet Location: Dresden

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, Kemper 84100101 welding fume extraction with new filter + mats. The installed filter is also as good as new! Very well preserved 3 meter extraction hose Cgslevxz S Hsq Ev Aajt 380 volts Year of manufacture 1996

Condition: like new (used), Year of construction: 2007, operating hours: 2,035 h, Functionality: fully functional, travel distance X-axis: 2,540 mm, travel distance Y-axis: 1,397 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, table length: 3,530 mm, table width: 2,413 mm, positioning speed: 4 m/min, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, input current: 63 A, cutting speed: 4,572 mm/min, compressed air connection: 8 bar, pump pressure: 3,400 bar, overall weight: 2,354 kg, waste water connection: 50 mm, input frequency: 50 Hz, power: 22.06 kW (29.99 HP), This OMAX 55100 with a 3050V pump is from 2007 and has 2,035 operating hours. In 2024, this waterjet machine was fully serviced and is therefore in almost new condition. Maximum Workable Surface Area: 2540 x 1397 mm Repeatability Accuracy: ± 0.025 mm Maximum Load Capacity: 1950 kg per m² Drive System: The machine is equipped with ball screw spindles and linear bearings for the X, Y, and Z axes. All axes are fitted with digitally synchronized AC servo motors. To protect the guides from abrasive material and water, they are fully shielded with bellows. High-Pressure Pump: The 22 kW direct-drive high-pressure pump delivers a cutting power of 19.0 kW at the cutting head due to its efficiency. Cgolq Ev Aet Ut Hksast This machine comes with: Intelli-MAX Premium Make controller Intelli-MAX Premium Layout CAD/CAM software Programmable 3D Z-axis Maxjet5-I diamond integrated cutting head Water level control for underwater cutting Abrasive feeding system 300 kg abrasive storage tank Height sensor with collision detection The included Intelli-MAX package contains: Intelli-NEST: Intelli-NEST is integrated into OMAX Make. This module nests the workpiece into an array (structure) and can nest any OMAX cutting path. Intelli-CAM: With the Intelli-CAM module, cutting files can be directly created from STEP, SLDPRT, PAR, PSM, and other file types. Intelli-TRACE™: The standard layout includes the Intelli-TRACE™ function, which allows an image from a scanner, digital camera, or even the internet to be quickly converted into a cutting file. Intelli-VISOR™: Monitors and controls the operation of the machine and pump. The Intelli-VISOR is the link between maintenance, the current situation, and the production process. In case of deviations or when preset limits are reached, it pauses the machine and can send an email notification. Software Licenses: The extensive Intelli-MAX software package can be used at multiple workstations within your organization at no extra cost. This means there is no limit to the number of software licenses. Languages: The Intelli-MAX software package is available in 17 languages, including Dutch, English, and French. Software Updates: All OMAX users are entitled to unlimited free software updates for the Intelli-MAX package. This ensures that every machine is always equipped with the latest waterjet software. Customers can download free software updates from our website. IWE waterjet technology has been the OMAX distributor for the Benelux for nearly 30 years.

Condition: good (used), Functionality: fully functional, Equipment: type plate available, Welding machine CLOOS GLC 353 MC3 with wire feed case CLOOS CK 98A incl. 1 new roll of welding wire good condition year of manufacture unknown manufacturer: see photo condition: used but good condition offer is aimed at tradespeople, dealers, public and church institutions! technology/item can be inspected by arrangement various trolleys, lattice boxes, forklifts and other industrial trucks in stock. other commercial products - see graphics Cgolq Evjvt Dd Ue Aast (photos similar)

Condition: new, Article: Welding rotary table 50 kg TYPE: KT-50 without jaw chuck Max. Load: 50Kg horizontal Max. Load: 25Kg vertical Rotation speed: 1-7,5 rpm Rotation direction: left and right Face plate speed: manually adjustable Face plate diameter: 315mm Cgslq Evjbambrj Aajt height of faceplate: 375mm inclination angle of face plate: 0-90 Motor power in operation: 0,08kw Motor power standby (Kw): NA dimensions: 430 x 430 x 375mm Weight: approx. 38kg Power: AC 110V / 220V 50/60Hz Price is without chuck and height adjustable workbench Surcharge quick chuck 195.-€ Packing and shipping Germany approx. 80.-€

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,710 h, Main Drive Number of axis 5 Table Outer length 3210 mm Cslqsv D R D Ns Ev Aaogt Outer width 5410 mm Height adjustment 2150 mm Additional Equipment Reverse osmosis system with a capacity of 600 liters per hour and a 1000-liter permeate tank This 5-axis Intermac Primus 322 waterjet cutting machine was manufactured in 2019. It features a robust Intermac Primus OS Win 10 Enterprise 2016 control unit and a high-pressure capacity of 3800 bar. The machine includes a reverse osmosis system with a 600l/hour capacity, enhancing its operational efficiency. Ideal for precision cutting with a working area of 3210 x 2000 mm. Contact us for more information about this machine. Application Types Cutting

Condition: like new (used), Functionality: fully functional, Gloos welding machine model GLC 316 very good condition. Cgolovuykgsq Ev Aajt

Condition: new, Year of construction: 2021, Functionality: fully functional, working range: 14,000 mm, travel distance X-axis: 14,000 mm, travel distance Y-axis: 4,002 mm, travel distance Z-axis: 300 mm, positioning accuracy: 1 mm, type of input current: three-phase, input voltage: 380 V, table length: 15,000 mm, table width: 4,690 mm, pressure: 10,000 bar, table height: 290 mm, operating pressure: 10,000 bar, Brand new STM Waterjet cutting machine. (never been used) Steel stainless steel, aluminum, wood, glass, marble, plastic Large size: 14 x 4 meter. Cuts concrete up to 25 cm. thickness. New price : +/- 600,000 €. Cjlq Ev Asuhnu Ueaogt

Condition: good (used), Power: 15 KVA Execution: 530 mm Colq Ev Asm Twicsajgt

Year of construction: 2022, Condition: new, Welding post Migatronic MIG 445 - in new condition. Consisting of power source, wire feeder unit, indicator panel and water cooling module. Power source consists of a three-phase welding transformer, two voltage step switches, a rectifier and an inductor. The power source always has cooling with an automatic stop function. Dimensions (lxwxh) 96x48x126 Weight 179 kg Cooling unit, tank capacity 4.0 l Cooling capacity 800 W Connection voltage 230/400 V Fuse 230 V – 40 A Fuse 400 V – 25 A Power factor 0.95 Efficiency 75% Cgjlqjif R Rgs Ev Aaot Cos phi 0.99 Open circuit voltage 18-51 V Voltage steps 24 Welding range min. 40A/16 V Welding range max. 445A/36.3 V Induction positions 2 Protection class IP21 Sphere of application S EN/IEC60974-1 standard EN/IEC60974-2 standard EN/IEC60974-10 (Class A)

Condition: as good as new (ex-display), Super practical heavy table,good quality Welding rotary table 100 KG load capacity Max. Load: 100Kg horizontal Max. Load: 50Kg vertical Rotation speed: 1- approx.7 rpm Rotation direction: left and right Faceplate speed: manually adjustable Face plate diameter: 345mm height of faceplate: 415mm Inclination angle of face plate: 0-90 Motor power in operation: 0,12kw Celq Evj Ugnbe Aaegt dimensions: 500 x 470 x 415mm Power: AC 110V / 220V 50/60Hz On request with jaw chuck / quick chuck extra charge 180.-€ Free delivery 90.-€