Used Singer for sale (49)

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Completely overhauled OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – mechanically and visually in top condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent condition both technically and visually. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts were carefully inspected and replaced as necessary, including but not limited to ball rollers and drive spindles. A comprehensive geometric measurement, alignment, and additional verification using a laser measurement system were carried out afterwards. The machine bed as well as the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, have been completely renewed. Additionally, the machine has been completely repainted and is also visually in an extremely well-maintained condition. The generator and control system have been cleaned and technically checked. The generator’s climate control unit has also been cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent extensive EDM testing in accordance with OPS Ingersoll’s quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Technical data: - Manufacturer: Ingersoll (OPS Ingersoll) - Type: Die-sinking EDM machine - Model: OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn fast programming - Powertec Handheld – multifunctional manual control unit Dujdpfeyr I Aijx Acxop - Manual eroding with Powertec Handheld - High Speed Jump max. 18 m/min - Generator output: 60 Amperes, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up carousel changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Work table (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Special features: - Linear measuring system on all axes (Z-axis standard on series model)

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Dodpfsyrqpfox Acxeup Linear measuring system on all axes (Z axis standard in series)

Condition: refurbished (used), Year of construction: 2013, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, table width: 760 mm, distance table to quill: 585 mm, table length: 1,000 mm, workpiece length (max.): 1,095 mm, workpiece width (max.): 795 mm, workpiece height (max.): 480 mm, overall weight: 6,800 kg, year of last overhaul: 2025, table load: 2,000 kg, rapid traverse Z-axis: 18 m/min, Equipment: documentation/manual, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Duodpfxoyrqpre Acxep Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: Djdpfoyrqn Iex Acxoup - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: HEIDENHAIN, controller model: iTNC640, spindle speed (max.): 42,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 32, This 5-axis OPS INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain Control TNC 640, a high-frequency spindle with a speed range up to 42,000 rpm, and a 32-slot HSK-E40 tool changer. The machine offers a traversing speed of 30m/min and traversing paths of 550x400x400 mm. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL High Speed Eagle V5 machine we have for sale. Contact us for more information. • Max. acceleration: 15 m/s² • Max. traversing speed: 30 m/min • Control cabinet ambient temperature: up to 33 °C (with heat exchanger) • Traversing paths (X/Y/Z): 550 x 400 x 400 mm • Drive system: Ball screw spindles with directly coupled AC servo motors Dodpfox D Ektjx Acxsup • Measurement system: Absolute glass scales on all axes • Torque (S6 60%): 6.7 Nm

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 635 mm, travel distance Y-axis: 365 mm, travel distance Z-axis: 345 mm, total height: 2,200 mm, table load: 1,000 kg, overall weight: 3,500 kg, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3-axis OPS INGERSOLL OPS 600 was manufactured in 2001. It features a work spindle speed range of 5000-40000 and a tool magazine with 12 positions. The machine includes an extraction system for oil mist or dust and a Teka filter system. Ideal for high precision milling, consider the opportunity to buy this OPS INGERSOLL OPS 600 vertical machining centre. Contact us for more information about this machine. Machine Benefits Dujdpsym Ap Tsfx Acxop Technical Machine Benefits • Max distance from work spindle to clamping table: 470 mm • Work table clamping area: 630 x 500 mm • Tool holder: hsk-e 32 • Tool magazine: 12 tool positions • With media distributor • The machine is completely enclosed • Extraction system included for oil mist or dust • Manuals and operating instructions are available Extra Information Machine still under power Dimensions Machine Depth 2200 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,269 h, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640 HSCI, total height: 2,450 mm, table load: 250 kg, overall weight: 7,200 kg, spindle speed (max.): 42,000 rpm, number of axes: 5, This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017, featuring a robust vertical machining center design. It boasts a high-speed Fisher HSK E40 spindle with speeds up to 42,000 rpm and a 32-tool magazine. The machine includes a 4/5-axis tilting rotary table, enhancing its versatility for complex machining tasks. Consider the opportunity to buy this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine. Additional equipment • 4/5-axis Tilting Rotary Table prepared for Pallet System • B-axis Tilting Range: −120° to +60° • C-axis Rotation: 360° • B-axis Speed: 25 rpm • C-axis Speed: 20 rpm • Keller Dust Extraction System • EROWA UPC Production Chuck Clamping System • Tool Length and Diameter Laser Measurement, Broken Tool Detection • Touch Probe (Renishaw) • Precision Pack III – 5-axis Thermal Compensation Machine Benefits Technical Machine Benefits Dsdeyaqf Njpfx Acxoup • Spindle-to-table distance (min/max): 50–450 mm • Table design: fixed dimensions: 650 × 500 mm • T-slots: 5 × 14h12 • Torque (s1/s6 - 60%): 5. 9 nm / 6. 7 nm • Tool magazine capacity: 32 • Max. Workpiece size: Ø400 × 380 mm Extra Information ECOTEC Energy-saving Function Table Adapter for 4th and 5th Axes HR410 Wireless Remote Control EROWA UPC Basic Chuck with EROWA ITS100 Adapter Dimensions Machine Depth 2800 mm

Condition: ready for operation (used), Year of construction: 2007, number of axes: 4, This 4-axis OPS INGERSOLL Gantry 1200 was manufactured in 2007. It features a 3000-liter dielectric capacity, machine feet, two heavy-duty pallets, and a 3R clamping system. Ideal for precision die-sinking EDM applications. Contact us for more information about this machine. Additional equipment Dujdpfx Ajx D Rgtjcxep • Machine feet • 2x heavy duty pallet • 3R clamping system 4 axis Extra Information 3000 liters of dielectric Fully functional machine

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 635 mm, travel distance Y-axis: 365 mm, travel distance Z-axis: 345 mm, total height: 2,200 mm, table width: 500 mm, table length: 630 mm, table load: 1,000 kg, overall weight: 3,500 kg, spindle speed (max.): 40,000 rpm, This 3-axis OPS INGERSOLL 600 vertical machining center was manufactured in 2000. It features a travel range of 635 x 365 x 345 mm, a maximum table load of 1000 kg, and a high-speed spindle ranging from 5000 to 40000 rpm. The machine includes a tool magazine with 12 slots and an Andronic 2000 control system. Consider the opportunity to buy this OPS INGERSOLL 600 vertical machining center. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Distance from work spindle to clamping table: 470 mm • Tool holder: hsk-e 32 • Tool magazine with 12 tool places • The machine is completely enclosed, an extraction system is part of the machine to extract the oil mist or dust generated during hsc milling. • Filter system manufacturer: teka Extra Information Duedpfxoym Atxe Acxop Machine still under power Dimensions Machine Depth 2200 mm

Condition: excellent (used), Year of construction: 2011, Control PC-NC Dialog Travel paths X/Y/Z: 1000/1510/700 mm C-axis 30-way electrode changer Hirschmann clamping system Support surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Dedpjyriu Hofx Acxjup Fire extinguishing system

Condition: used, Year of construction: 2009, total height: 2,800 mm, total length: 3,500 mm, total width: 1,800 mm, Empty weight: 13.000 kg Price: On request - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 675002 - Drive system: CNC - Horizontal/vertical: Horizontal - Number of axes [pcs]: 3 - X-axis travel [mm]: 650 - Y-axis travel [mm]: 1100 - Z-axis travel [mm]: 500 - C-axis rotation [°]: 360 - Options: Chip conveyor, Tool magazine, Probe - └ Tool magazine [pcs.]: 32 - Transport dimensions: 3500mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT Dujdpjxqw E Asfx Acxjp VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Completely overhauled OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – mechanically and visually in top condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent condition both technically and visually. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts were carefully inspected and replaced as necessary, including but not limited to ball rollers and drive spindles. A comprehensive geometric measurement, alignment, and additional verification using a laser measurement system were carried out afterwards. The machine bed as well as the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, have been completely renewed. Additionally, the machine has been completely repainted and is also visually in an extremely well-maintained condition. The generator and control system have been cleaned and technically checked. The generator’s climate control unit has also been cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent extensive EDM testing in accordance with OPS Ingersoll’s quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Technical data: - Manufacturer: Ingersoll (OPS Ingersoll) Djdjykn Ngepfx Acxjup - Type: Die-sinking EDM machine - Model: OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn fast programming - Powertec Handheld – multifunctional manual control unit - Manual eroding with Powertec Handheld - High Speed Jump max. 18 m/min - Generator output: 60 Amperes, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up carousel changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Work table (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Special features: - Linear measuring system on all axes (Z-axis standard on series model)

Condition: good (used), Year of construction: 1997, functionality: fully functional, power: 5.5 kW (7.48 HP), suction capacity: 5,500 m³/h, filter area: 40 m², overall weight: 1,500 kg, an outdoor extraction system with 5.5 kW motor, electric discharge, 4 chip bags Dusdpfx Asyn Ehzocxsp

Condition: excellent (used), Year of construction: 2011, OPS Ingersoll Gantry Eagle 800 Year of manufacture: 2011 Operating hours: 1703 Djdoxiwz Uopfx Acxeup Eagle Powertec control X, Y, Z travel: 550 x 850 x 450 mm Clamping plate: 760 x 1000 mm Max. workpiece weight: 2000 kg EROWA interface Submersible working tank C-axis Chiller Fire extinguishing system Remote control 20-station electrode changer 60 amp generator Incl. dielectric fluid (+/- 700 liters) Incl. probe Incl. probe on machine bed Incl. magnet 400 x 200 mm Incl. cabinet with accessories Incl. documentation Machine is powered up for inspection

Condition: refurbished (used), Year of construction: 2013, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, table width: 760 mm, distance table to quill: 585 mm, table length: 1,000 mm, workpiece length (max.): 1,095 mm, workpiece width (max.): 795 mm, workpiece height (max.): 480 mm, overall weight: 6,800 kg, year of last overhaul: 2025, table load: 2,000 kg, rapid traverse Z-axis: 18 m/min, Equipment: documentation/manual, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps Dodpfoyi Uaisx Acxoup High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition Duedpfxoyiz T No Acxop The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Dusdpfoyh A Nasx Acxjp Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale is a die-sinking EDM machine of the brand OPS Ingersoll and the type Gentry Eagle 500 A matching Erowa automation for tool and workpiece change, as well as an identical 2nd system with tool changer are also for sale in the package Offer is only valid for one Ingersoll machine if you are interested in the complete machine please mention in your inquiry The machine is in very good condition and fully functional. Both machines are loaded via Erowa Automation, this machine does not have its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Dusdjtdkk Aopfx Acxsp Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale is a die-sinking EDM machine of the brand OPS Ingersoll and the type Gentry Eagle 500 A matching Erowa automation for tool and workpiece change, as well as an identical 2nd system are also for sale in the package Offer is only valid for one Ingersoll machine if you are interested in the complete machine please mention in your inquiry The machine is in very good condition and fully functional. Both machines are loaded via Erowa Automation, this machine has its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Duodstdkkuspfx Acxop Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), For sale is a system with 2 OPS Ingersoll Gentry Eagle 500 machines and an Erowa automation for tool and workpiece change. The system is in very good condition and fully functional. Both machines are loaded via the Erowa automation, one machine has its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm Dsdpfxjq Su Hns Acxjup max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2008, condition: used, machine/vehicle number: 575415, Weight: 6,700 kg, various peripherals, control unit, 1 handling system OPS INGERSOLL IMC 5, year of manufacture: 2008, serial no.: 583080, weight: 1,800 kg, 1 chiller unit M.T.A. TAE EVO M10, year of manufacture: 2012, 1 fire extinguishing system KRAFT & BAUER FB 703 Djdpoyidk Isfx Acxsup

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. Duodpfx Acjvwa Nboxsp

Condition: used, Year of construction: 1998, Spark erosion machine OPS INGERSOL Gantry 1000 multipulse, No. 571692, year of manufacture 1998, working area 1,200 x 1,000 x 700 mm, with various auxiliary units, cooling unit/pump replaced in 2025. Duodpfx Acoyhqntsxjp

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Dsdpfx Aex Ryzvecxeup Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: used, Year of construction: 2007, x-travel 550 mm y-travel 400 mm z-travel 400 mm Control INGERSOLL ANDRONIC Duedpfx Ajxiy A Uocxsp