Used surface finishing machines for sale (170)

Year of construction: 2005, condition: used, Chamber spray cleaning system Basket usable dimensions, loading basket: L x W x H 842 x 659 x 512 mm Maximum loading weight: 100 kg; loading unit in front of the system included 2-tank design: Cleaning (1,200 liters) Rinsing (1,200 liters) System with electric heating - Cleaning process: Spraying Blsdpfx Afoz E I Syjmop - Basket remains stationary, swings, or rotates during the cleaning, rinsing, and drying process (freely selectable in the program) - Vacuum drying - Full filtration of the cleaning solution (Tank 1), 2x bag filters, filter fineness freely selectable - Automatic water refill for each tank - Coalescence oil separator External dimensions: 4,300 x 4,360 x 4,020 mm System weight: 5 tons Connection power: 110 kVA Fuse: 250A Control: Siemens S7 The system is fully functional, but with the limitation that operation via the panel is only partially functional. This is a consignment sale; the system must be dismantled and collected on-site by the buyer.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, Complete industrial chrome and nickel plating installation, fully automatic, in perfect operational condition, including its own automated wastewater treatment plant, designed and scaled specifically for the line (with a treatment capacity of 12,000 liters per cycle), as well as a bath heating boiler with coil circuit. The line was originally commissioned in 2000 and has been continuously refurbished, modernized, and maintained, with a notable conversion to trivalent chrome carried out in 2024, making it fully compliant with current environmental regulations. Total volume of process baths: 43,600 liters, distributed among nickel stripping, pickling and degreasing, nickel Watch, acid copper, semi-bright nickel, bright nickel, trivalent chrome, and trivalent chrome passivation. Bjdpfx Afey Sw Suomjlp

Year of construction: 2017, condition: good (used), We are selling our etching system for magnesium and zinc, consisting of: Blodpfx Aoy H D Acefmjp - STOMA Etching Machine E-90L - STOMA Developing Machine 18 L - STOMA Preparation & Pre-treatment Tank - STOMA Exhaust Hood 90 L All components were purchased new in 2017. The STOMA ECOLINE etching machines are largely constructed from V2A-grade stainless steel. The machine enclosure is bolted. ECOLINE etching machines are equipped with a separate freestanding control panel for increased flexibility. A powerful AC drive motor ensures reliable operation. The machines are supplied without factory-installed extraction or a fan. Standard configuration includes a connection for direct water cooling. Bath volume: 90L, Max. plate size: 50 x 65 cm, Weight: 450 kg, Dimensions (LxWxH): 1315 x 1430 x 1310 mm. - Suitable for magnesium and/or zinc - Maximum plate format: 50 x 65 cm - Bath volume approx. 90L - Mains voltage: 3 x 400V - Total space required: approx. 2 x 2.5 m STOMA Preparation Tank - Maximum plate format: 50 x 65 cm - Water connection: R ½" - Footprint: 200 x 95 cm - Drain pipe diameter: 50 mm STOMA Developing Machine 18L - Maximum plate format: 50 x 65 cm - Approx. 18 L

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Graf Wet Blasting System Machine type: Wet blasting system Manufacturer: Graf Technik GmbH Type: Compact 2 Plus Year of manufacture: 2013 Control system: Siemens Origin: Germany Bledpfx Asztyzlsfmsp Location: Albstadt Delivery time: upon agreement

Year of construction: 2016, condition: used, A mass finishing system with dosing equipment is offered. Operator panel on the control cabinet. Equipped with dosing unit, control cabinet, safety enclosure, stairs and conveyor chute. Inspection possible by prior arrangement. Blsdpfx Asz Hlxaefmjp

Condition: ready for operation (used), Walter Fielenbach - Centrifuge F25 -Payload: 25 kg Bodpfx Afszta U Somolp -Drum volume: 35 liters -Drum wall: 3 mm steel -Speed: 980 rpm -Motor power: 4.5 kW -Drive power: 1.5 hp -Material: SM steel Dimensions: L x W x H 0.9 x 0.9 x 1.2 meters / Weight 300 kg Errors and omissions excepted.

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Bjdpoz Rn Dnefx Afmslp

Condition: ready for operation (used), Year of construction: 1982, machine/vehicle number: 16-176-82, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 12 A, input frequency: 50 Hz, type of input current: AC, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, Two used high-frequency (HF) machines from the manufacturer AMYSA-YVERDON SA, type AM 176, are for sale. These machines are particularly suitable as sources of spare parts, for retrofitting, or as a basis for a customized rebuild. They are offered in their current condition, as shown in the photos. Machine 1 Manufacturer: AMYSA-YVERDON SA Type: AM 176 Machine number: 16-176-82 Voltage: 380 V / 50 Hz Power: 7.5 kVA Current consumption: 12 A Machine 2 Manufacturer: AMYSA-YVERDON SA Type: AM 176 Machine number: 03-176-82 Voltage: 380 V / 50 Hz Bedpfxoz A E Ers Afmslp Power: 6.5 kVA Current consumption: 10 A The existing mechanical, hydraulic, and electrical components, as well as the installed control systems, are included in the offer. The HF generators and resonant circuits are not included in the offer. These are older, used industrial machines. Complete functionality is not guaranteed. An inspection can be arranged by appointment. The machines are currently being disassembled. Collection by the buyer at the location in the Basel region, Switzerland. Price: CHF 2,500 per machine, negotiable Package price for both machines available upon request. Sale from the location, without warranty and excluding any liability for defects.

Condition: used, DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (like new!!) Dyemansion Powershot C blasting cabinet Gentle cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0, Year of manufacture: 2021 The industry standard for simple and efficient powder removal Automated powder removal increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time required for part cleaning and the personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated powder removal with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blasting cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts contained within. This configuration guarantees efficient powder removal. High user comfort with improved ergonomics and process control Experience a new level of process control with a touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5x full Stratasys H350 build volume Effective volume of the basket 26 liters Bsdpfozgr T Tox Afmelp DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space required in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: 1kW Requirements 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Consumption Minimum: 1.4 m³/min at 2.2 bar Maximum: 1.8 m³/min at 5 bar NOISE EMISSION: Sound level < 80dB(A) Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions for you by telephone.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 118413, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) Blsdpfxsydqk Ho Afmop ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, A spray station with exhaust air connection is offered. Equipped with side shields, upper extraction hood, integrated lighting, rear separation panel, floor tray and central workpiece support. Spray gun, hoses and side-mounted material container. Inspection possible by arrangement. Bjdpfx Ao Ahi Tcjfmslp

Condition: used, A spray station with exhaust air connection is offered. Equipped with side shields, upper extraction hood, integrated lighting, rear separation panel, floor tray and central workpiece support. Spray gun, hoses and side-mounted material container. Inspection possible by arrangement. Blodpfs Ahi S Ujx Afmop

Condition: used, Osai Neomark 400 Nd-YAG Laser Marking Machine The NeoMark 400 Performance system was developed for printed circuit board marking. By completely eliminating mechanical movements of the laser, extremely high-resolution markings are possible. The internal conveyor belt is designed to perform width registration for various card types up to a side length of 320 mm. The user interface consists of a console with a separate keyboard for controlling the laser source, the control systems, the marking systems, and the automation responsible for card movement via a PC. The NeoCut management software, developed based on NC², the control software of the NEO family, is a simple and intuitive interface for programming the machine and subsequent production monitoring. The Neomark is also equipped with an extraction system that can be connected to an external extractor or a central extraction system to collect the fumes and dust generated during the process. Main features: Manufacturer: Osai Type: Marking Laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Voltage: 230 V Rated frequency: 50 Hz ± 2 % Maximum electrical absorption: 4 kW Minimum flow rate for pneumatic system: 20 Nl/min Working area: up to 320 x 320 mm Laser safety class: Class 1 (EN 60825-1) Access to the working area: Front door with laser filter Loading and unloading of the printed circuit board PC with LCD monitor and keyboard Dimensions: 1200 x 1310 x 1800 mm Weight: approx. 1300 kg Laser completely rebuilt Motor of the beam expander renewed All hoses for cooling renewed Blsdpfxsxbck Eo Afmsp More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, FOBA FD84S Sensor for YAG Laser Marking System For sale is a used sensor, type FD84S, from the manufacturer FOBA. The sensor is intended for use in YAG laser marking systems. Technical details: - Manufacturer: FOBA - Model: FD84S / S50 - Design: Sensor / Laser control component - Laser class (system application): 4 - Wavelength: 1064 nm - Laser power (system application): 70 W - Pulse power: 10 kW - Pulse duration: 70 ns Blodpfjxlq Exox Afmep - Application area: Spare part / component for FOBA laser marking systems - Condition: Used, functional Buy FOBA FD84S sensors and other items at a low price – Here you buy goods from a professional for professionals – You will find more attractive offers in our SHOP.

Condition: used, FOBA DP 15 Laser Marking System The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focus of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics with the "all-round laser." The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideally suited for metals and a wide range of plastics. The technology enables permanent, easily readable, and precise marking. Functionality: The laser beam creates a focused light spot that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing marking: A color change of the material through heating. Color change: Creation of a color contrast on the material. Material removal: Removal of material to create a recess. Details: Device: FOBA DP 15 Laser Marking System Laser type: Fiber laser Wavelength: 1064 nm Focal length (f): 254 mm (equivalent to 10 inches) You can find more new and used items in our shop! International shipping costs available upon request! Bjdpfxsw U T Ebe Afmelp

Condition: used, FOBA Laser FOBALAS 94S Nd:YAG laser marking system, marking laser. FOBALAS F 94S laser marking system. Laser type: FOBALAS 100 Bsdpfxew U Time Afmolp CW/Q-switched – Nd:YAG Power class 4 P max = 120 W 1.064 μm XY/2-100 HPM Type: Foba Voltage: 15 V Wavelength 1064 Operating hours: 43,927 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Blsdpfx Afjw Hwp Njmjp

Condition: used, Year of construction: 2013, Used for the production of inner liners, vacuum forming machine BL 2200x900x600-NG-EL-PF-DX, year of manufacture 2013, serial number C1091, voltage 380V-N-50Hz+PE. Machine Specifications Summary Forming & Sheet Dimensions Maximum inside frame dimensions: 2205 × 905 mm Mould base maximum size: 2200 × 900 mm Mould base minimum size: 700 × 500 mm Maximum sheet size: 2290 × 960 mm Minimum sheet size: 790 × 560 mm Maximum mould height: 850 mm (600 + 250 mm) Maximum formed part height: 600 mm Maximum sheet stack height: 1000 mm Sheet support stack height: 144 mm Electrical Power Requirements Upper heating power: 93.8 kW Lower heating power: 80.3 kW Forming motors: 23.2 kW Sheet conveyor motor: 4.6 kW Transport support regulation motors: 0.6 kW Sheet centering device motors: 0.36 kW Sheet pick-up motors: 3.0 kW Cooling fan motor: 5.5 kW Extraction fan motor: 0.25 kW Unloading transfer motors: 3.0 kW Guillotine group motors: 8.1 kW Conveyor belt motor: 0.75 kW Thermoregulator units: 25.65 kW Chiller unit: 16.25 kW Ancillary equipment maximum consumption: 3.89 kW Maximum installed power: 269 kW Bljdpezumrmofx Afmep Typical operating power (50% load): 135 kW Pneumatic System Forming tank capacity: 2 m³/cycle Pneumatic system pressure: 600 kPa Air consumption (VGS): 0.85 m³/cycle Air consumption (movements): 0.35 m³/cycle Air consumption (cooling): 0.90 m³/cycle Air consumption (pressure forming at 200 kPa): 3.2 m³/cycle Total air consumption: 4.85 m³/cycle Mechanical Characteristics Forming platen closing force: 400,000 N (400 kN) Maximum mould + reduction frame weight: 2,200 kg Machine weight: 30,000 kg (30 tonnes) Water Chiller Unit Chiller tank capacity: 240 litres + piping Water inlet pressure: > 0.1 kPa Water outlet pressure: 0 kPa Water inlet temperature: 20 to 25 °C Utilities Required Electrical supply: 269 kW installed load Compressed air: 600 kPa pressure, 4.85 m³/cycle consumption Cooling water: 20-25 °C inlet temperature Chilled water tank: 240 litres minimum capacity Fully automatic thermoforming machine designed to shape plastic sheets up to 2200 × 900 mm with a maximum forming depth of 600 mm, suitable for high-capacity industrial applications. Thermoformer details: Forming area 2200mm x 900mm Max forming depth 600mm 3x loading stations. 1 x heating station. - (pre-heating, final heating, upper and lower elements) ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management. Applications - High-throughput environments; this COMI machine is ideal for producing refrigerator liners, door panels, containers, and other thermoplastic components where consistent quality, large sheet handling, and repeatable forming cycles are essential.

Condition: used, Year of construction: 2014, COMI 1092 Door liner thermoforming machine, Thermoformer HEDL 2000x800x200, Year of Manufacture 2014, Serial Number C1092 Machine Specifications (List View) Forming & Mould Dimensions Maximum inside frame dimensions: 2004 × 804 mm Maximum moulded part height: 150 mm (male mould) / 50 mm (female mould) Maximum mould base dimensions: 2000 × 800 mm Minimum mould base dimensions: 600 × 500 mm Coil width range (min/max): 580 to 900 mm Mechanical Characteristics Lower die holder force: 40,000 kg Machine weight: 20,000 kg (20 tonnes) Machine dimensions: See Drawing LO-029-14-01 Heating System Upper heating power: 168 kW Thermoregulator power: 24.99 kW (3 × 8.33 kW) Motors & Drives Blsdpfxjzumwco Afmop Forming motor power: 12 kW Vacuum pump motor power: 7.8 kW De-reel device motor power: 0.37 kW Sheet conveyor motor power: 8.17 kW Transport regulation motor power: 1.1 kW Fan motor power: 3.0 kW (4 × 0.75 kW) Transfer unloading motor power: 3.0 kW (2 × 1.5 kW) Scrap cutting motor power: 2.2 kW Moulded-part unloading belts motor power: 0.5 kW Cooling & Auxiliary Equipment Chiller power: 28.75 kW Auxiliary equipment maximum power: 4.12 kW Electrical Requirements Maximum installed power: 264 kW Typical operating power (50% load): 132 kW Pneumatic Requirements Pneumatic operating pressure: 6 bar Air consumption: 2,000 N litres/cycle Water Requirements Water temperature: 25 °C Water pressure: 2 to 3 bar . Fully automatic thermoforming machine designed to shape plastic sheets up to 2000 × 800 mm with a maximum forming depth of 150 mm (200 mm), suitable for high-capacity industrial applications. Thermoformer details: Forming area 2000 × 800 mm Max forming depth 150 (200) mm Heating station – ONLY Upper heater, heater length fully configurable, fulfils pre-heating and heating functions. Pressure and vacuum forming operation. Trimming press. Scrap collection end station. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management.

Year of construction: 2017, condition: used, A Hege/Walther Pilot painting system consisting of a wash booth, preparation room, spray booth, two drying booths, lift/lower station and manual hand-pushed monorail conveyor is offered. 1) Hege wash booth, year of manufacture: 2017, washing device: electrically heated steam cleaner, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 8000mm/5000mm/3000mm. 2) Walther Pilot preparation room, year of manufacture: 2008, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 5140mm/4120mm/3000mm. 3) Walther Pilot spray booth, year of manufacture: 2008, ventilation: supply and exhaust air, recirculation mode possible, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 4) Walther Pilot drying booth, year of manufacture: 2008, ventilation: recirculation mode, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 5) Hege drying booth, year of manufacture: 2017, ventilation: recirculation mode, heating: pumped hot water, booth dimensions X/Y/Z: approx. 5840mm/4120mm/3000mm. 6) Hege lift/lower station, year of manufacture: 2017, lifting capacity: 980kg, payload: 998kg, lift: approx. 2500mm, lifting speed: approx. 17.4m/min, version for asymmetrical load distribution: 70%/30%. 7) Hand-pushed monorail conveyor, year of manufacture: 2008, extension: 2017, operating mode: manual, load capacity: 400kg/m, max. trolley load: 200kg, max. load bar capacity: 400kg, max. load between the support brackets: 500kg, max. system temperature: 80°C, max. temperature in the area of the lift/lower station: 40°C. Documentation available. An on-site inspection is possible. Blodpfx Ajzwfqtjfmep

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 250 mm, filter area: 80 m², noise level: 85 dB, actuation type: electric, total height: 3,000 mm, total length: 2,000 mm, total width: 1,200 mm, overall weight: 600 kg, Equipment: CE marking, Used filter, model PC 8 TV, in excellent condition, like new. Year of manufacture: 2018 Bledpfx Aoztqctefmsp The electrical control cabinet for the filter is included. Upon purchase, the filter will be supplied with 8 new filter cartridges. Technical data of the PC 8 TV filter: No of cartridges: 8 pcs Filtering surface cartridge m²: 10 Filtering surface collector m²: 80 Total capacity m³/h: 6.000 Size of the cartridge mm: Ø325-600 No. of valves pcs: 8 El. motor power kW: 5,50 Static pressure Pa: 1.800 Air consumption max. m³/h : ~40,00 Dimension of filter A (length) mm: 1.700 Dimension of filter B (width) mm: 930 Dimension of filter C (height with silencer) mm: 2.950 Inlet flange Ø mm: 2x250 We reserve the right to errors in the data provided. We accept no liability for any errors or inaccuracies in the description or technical specifications.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, travel distance Z-axis: 300 mm, space requirement width: 1,550 mm, space requirement height: 2,050 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. Bodpfx Ajxd Az Njfmelp With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2007, condition: used, Supply voltage: 1~ 230V AC, rated current: 16A, mains frequency: 50Hz, connected load: 0.64kA, CE marking. On-site inspection is possible. Bodpez R Uwvofx Afmjlp

Condition: like new (used), The system is a complete surf finisher system including suction station + undersize screening station + complete water treatment + water tank from Rösler. If required, including robot + handling portal. The components are transferred by robot to a portal with holders and immersed in the rotating surf container. The deburring performance is 20 seconds. Immersion time corresponds to about the same performance as 10-15 minutes. in a conventional vibratory finishing machine. Rotating work tank RMSF 4/800 1 piece round plastic container - Working tank diameter: 850 mm Working tank depth: 500 mm 1 pc. quick coupling for easy changing of the working container 1 pc. drive motor, power 7.5 kW 1 pc. dosing device D1-K/320 SF (circulating water) on stand 1 pc. stand for enemas in the working container 1 piece flow monitoring (by means of flow monitor) Undersize screening: 1 pc. Grinding wheel return system 1 piece underframe as a stable welded construction 1 pc. balancer for weight compensation (sanding pad + hose + nozzle) including mounting frame - Suspension for hose on the base 1 pc. vacuum generator for generating a negative pressure - Connection of the line system to the transfer device of the vibratory finishing system - Suction hose with nozzle, length approx. 5 m 1 piece collection container 500 liters as a cyclone separator - for receiving the process media that are sucked out of the working container, - for delivering the process media to the screening machine - incl. automatically operated gate valve and hose for returning the process media to the screening machine 1 pc. spray nozzles for rinsing out the collection container 1 pc. 2-hand control for flap 1 pc. dosing device DZ1-K Rösler screening machine R 12/6 SM-E - for undersize screening - Total length: 1,400 mm - Overall width: 1,160 mm - Screen area: 1,200 x 600 mm - Delivery height: 1,065 mm - Step in the separation zone: 1 x 40 mm - Drive power of vibration motors 2 x 0.525 kW - Vibration motors arranged laterally - Engine speed: 1500 rpm - Operating voltage: 400 V, 50 Hz, 3 Ph N/PE Rösler centrifuge Z 1000 ASS-II-Turbo with automatic sludge discharge consisting of: Centrifuge Z 1000 * Aluminum alloy centrifuge rotor * Speed: 2,050 rpm * Reduced stripping speed via frequency converter Bljdpfx Aoyngitjfmjp * automatically retractable paring knife * Amount of sludge per peeling cycle: up to 25 kg * automatic residual water drainage * Long bearing service life due to special bearings that can be relubricated * electronic vibration monitoring * automatic rotor flushing Accesories 1 piece mud truck RSKM 30 1 pc. Combined waste water and circulation tank 700/700 liters 1 pc. flocculant dosing pump DP2 1 pc. Automatic post-dosing DZ-4/320 2 suction lances (vacancy monitoring) 1 pc. sound insulation package approx. 80 dB(A) 1 piece cooling unit RK 3 1 piece titration measuring kit for manual compound measurement

Condition: new, operating hours: 5 h, functionality: fully functional, control cabinet width: 800 mm, control cabinet height: 1,700 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, Equipment: documentation/manual, Individual System L25-2203 cleanCABINET CL 100G-BRP Complete laser system for integration as individual components, consisting of the following modules: - Special item: Low-power laser production Bedpfxszl Slyj Afmelp Laser system CL100G-BRP, diode-pumped laser Wavelength 1064nm, operating mode: pulsed (ns) Average laser power: P = 100 W +/- 3% Prepared for pilot laser, 19" rack-mount design Comparable to 2003836 Special configuration: 10m fiber length, extended pulses - 2D optics system Stamp 10 for LP lasers (CL12BRP-CL100BRP) Automated 2D optics with connection for back-reflection protection (BRP) and 90° deflection, max. working area: 120mmx120mm (=160mm)/290mmx290mm (F=420mm) Focus diameter depends on the focal length of the optics Included components: 2D optics system Stamp 10 90° connection Control electronics Cable set cleanSTUDIO/cleanCONTROL license for 2D optics (without axis system support) RTC - Focusing lens f=254, fully quartz, High grade, working area approx. 150mmx150mm Minimal focus shift - BG protective glass slide STAMP 10/14 F420 Quick-change slide for mounting on the Stamp14 with locking monitoring - Alignment laser for low-power lasers (LP) (CL12G-CL-500G) The alignment laser allows monitoring the beam incident point on the component surface. Installation in the beam source, coupling into the fiber transmission, wavelength = 660nm, power: P = 0.5 mW (min. 0.2mW, max. 1.0 mW) - Decentralized laser source housing W/L Housing for the CL100 beam source including air-water heat exchanger 2kW, see 3D-CAD file. - GS control cabinet 1-1600 (CL12G-CL100G) Update: 32m cable length Laser housing in control cabinet design, type 1/1600 for low-power laser systems (CL12G-CL100G) consisting of: cabinet frame with Rittal double-bit lock, structural powder coating, RAL 7035S, optional air conditioning Installed on heavy-duty rollers, braked, 250kg load capacity, Fiber/cable feed-through through the roof, power supply via Harting Han6, left side panel, safety circuit "Performance Level D", installation position of laser and fiber outlet variable, emergency stop, key switch for starting and main switch in the front door, tested according to DGUVV3 Dimensions: HxWxD: 1600x600x800mm requires operation visualization, cooling capacity adjusted to the ambient temperature at the installation location WITHOUT AIR CONDITIONING as it is only for accommodating HMI, PC and PL-D technology including PLD technology PLD item as plug-in module (see below or alternatively wired in the control cabinet - BG housing 19" 2U PLD PLD plug-in for safe shutdown of low-power laser systems, installed in 19" housing - 2U for use with laser systems - VS-OPT Ethercat copper (MP/HP 2D) Ethercat interface for mid and high-power (2D) systems - fieldbus interface - 2D interface - Ethercat copper - cleanSTUDIO protocol - IPC 19" 1U - Touch panel standard 17-inch with HDMI+DP-VGA - Keyboard with trackball DE QWERTZ keyboard with trackball (DE)