Used spotting presses for sale (42)

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height Ijdpfx Aewpkv Ijg Ueal 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Length 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t Iedoiulkqjpfx Ag Usal - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Year of construction: 1973, condition: good (used), machine/vehicle number: 699, pressure power: 40 t table size: 670 x 470 mm Ijdpfey Dpbex Ag Usal tappet area: 670 x 470 mm passage between columns: 620/470 mm max. mounting height: 740 mm pressure speed: 20 mm/s rapid move: 50 mm ejector power: 3 t electrical connection: 380 V, 9,5 kW space needed: 2200 x 1875 x 3000 mm weight: 2400 kg

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Table size 2600*1800mm maximum daylight 2200 mm Iasdpfsrl Irkex Ag Ujl clamping force 300T table size 2600*1800mm max day light 2200mm clamping force 300T

Condition: excellent (used), Year of construction: 2022, clearance between the columns: 2,130 mm, overall weight: 56,000 kg, retraction force: 55 t, clamping force: 2,000 kN, MIL263 straight version for floor installation few operating hours Siemens S7-1500 / Multipanel TP1200 diagnostic system 2 pcs. Sitema safety catch lower pull-out table; upper machine table tiltable by 180 degrees rotary table with 5 positions Iaodpfjwu Upiex Ag Uel electronic parallelism control separate hydraulic unit on trolley for core pulls 4+4, standard version pump 8 liters/min, 2.2 kW

Condition: good (used), Year of construction: 1986, Power: 400kN Size of bolster: 900 x 1.280 mm Size of ram: 900 x 1.2200 mm Weight of mold: max. 7.000kg Power main motor: 7,5 kW Iodpfx Asthdbnjg Usal Stroke: 1.000 mm - With movable bolster - Bolster can be swiveled Weight: app. 7.000kg

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation Iajdpfx Aorr Ui Rsg Usl 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Condition: used, Year of construction: 1995, pressure 80 t table length 1.200 mm table width 1.000 mm 250 mm Iodevbwitspfx Ag Ujal 1.200 mm max. table load 7.000 kg distance between columns 1.100 mm voltage 400 V weight of the machine ca. 11,0 t dimensions of the machine ca. 4,40 x 2,58 x 3,66 m - Serial No.: 760/12312 Dimensions of upper and lower plate: 1.200×1.000 mm. Press upper plate is tilting by 150° Lower plate tilting by ±70° at front/back side The press is equipped with: - 2 energy accumulators in order to better gauge the adjustment of the mould halves - an automatic wax injection unit to check quality of pre-production mouldings - hydraulic ejection unit on lower plate

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 02.291.00, installation height: 950 mm, distance table to ram: 700 mm, retraction force: 450 t, pressing force: 100 t, oil tank capacity: 200 l, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Pressing force: max. 1,000 kN Retraction force: max. 450 kN Clamping plate size: 850 × 1,100 mm Installation height: 950 mm Max. installation height (steps 100 mm): 1,150 mm Ram stroke without swivel device: max. 700 mm Ram stroke with 90° swivel device: max. 700 mm Ram stroke with 180° swivel device: max. 1,000 mm max. possible ram stroke (steps 100 mm): max. 1,200 mm Mold weight: max. 5,000 kg Load of the upper clamping plate: max. 2,500 kg Load of the tilting device: 3000 kg Tilting angle: 65° Positioning accuracy Plane parallelism: 0.02 mm/1,000 mm Horizontal positioning accuracy: 0.04 mm Closing speeds Closing speed: max. 50 mm/s Opening speed: max. 50 mm/s Standard carriage speed: max. 50 mm/s Increased carriage speed: max. 200 mm/s Swivel-off speed standard: max. 50 mm/s Swivel speed increased: max. 180 mm/s Tilting speed standard: max. 50 mm/s Increased tilting speed: max. 100 mm/s Iasdpfxju Szzcj Ag Usl Hydraulics Closing system pressure: max. 190 bar Opening system pressure: max. 200 bar Injection unit Pressure: 4-10 bar Volume: 3 l Ejector Table ejector force: max. 35 kN Ejector stroke table: max. 130 mm Ejector movement table: max. 100 mm Ejector force ram: max. 48 kN Ejector stroke ram: max. 150 mm Die cushion Die cushion force: 250 kN Size: 550 x 750 mm MACHINE DETAILS Connected load: max. 10 kVA Drive power: max. 7.5 kW Tank capacity: 200 l Machine weight: 8,500 kg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 03105, clearance between the columns: 1,300 mm, table width: 1,200 mm, table length: 1,500 mm, Weight: approx. 16,000 kg, table size: approx. 1500x1200 mm, distance between top plate and bottom plate max is 1550mm, with sliding table and separate control/operating panel Isdpfjtdnnmsx Ag Ujal

Condition: used, Year of construction: 1980, pressure 40 t table length 670 mm table width 570 mm total power requirement kW weight of the machine ca. t Isdpfxot Hxczo Ag Ujal dimensions of the machine ca. m

Condition: used, Year of construction: 1980, pressure:24 t table length:1060 mm table width:650 mm Smallest opening:165 dimensions of the machine ca.:1300 x 700 x 1500 mm Iajdpfxoufufbs Ag Uel This Millutensil die spotting / tryout press has a capacity of 24 tons, this machine you can use for die en mould spotting press. This kind of machines are used for splitting, adjusting, maintenance and try-out operations on dies and moulds. This machine is produces by Millutensil s.r.l. in Italien.

Condition: used, Year of construction: 1987, pressure 4000 kN table length 2500 mm table width 2000 mm dayligth 2500 mm stroke 2600 mm tank capacity 1000 l Iedpfxevxwi Uj Ag Ueal total power requirement 56 kVA weight of the machine ca. 85 t dimensions of the machine ca. 9,2 x 3,1 x 8,2 m integrated wax-injection unit with 0-5 bar

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, LEVELING MACHINE LDM CUT TO LENGTH LINE 1500X6 Iaedpsvupclofx Ag Uel

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, table width: 980 mm, table length: 750 mm, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS Max. clamping force: 300 kN Max. load capacity of the lower plate: 4,000 kg Max. load capacity of the upper plate: 1,200 kg Swivel angle: 360° Table data Table dimensions: 980 x 750 mm Passage: 1,090 x 920 mm MACHINE DETAILS Machine weight: 3,900 kg Iaodpfx Agovxtiks Uol Dimensions: 2,200 x 1,900 x 2,300 mm EQUIPMENT Energy storage (impact trigger) Special wax injection unit User-friendly control panel with graphics

Year of construction: 2022, condition: new, Pressure: 400 t table length: 3000 mm table width: 2000 mm table load max .: 50 t Iajdpfx Aofn Efpsg Uol distance between the work tables : min. 400 / max. 2800 mm top tool foldable: 180 degrees Dimensions L x W x H: 7600 × 5670 × 7850 mm Total weight (without operating materials): 85 t Motor power: 44 kW

Year of construction: 1994, condition: good (used), machine/vehicle number: GCHREIS, SPECIFICATIONS: Capacity: 224 Ton Table Size: 71" lr x 98" fb Swivel Platen Size: 71’ lr x 98” fb Stroke: 71” Daylight Opening: 98” Distance Between Columns: 74” lr Table Capacity: 67,442 pound force Swivel Platen Capacity; 26,977 pound force Isdpfx Agjl Ayc Tj Ueal Oil Reservoir Capacity: 153 Gallons Motor: 25.3 Kw (approx 33 HP) 41 amps / 1755 rpm Power: 480 v/3ph/60cy Approx Floor Space required: 322.83” lr x 133.85” fb Approx Overall Height: 261.5” Above Floor: 233.8" Approx Overall Weight: 103,617# EQUIPPED WITH: Press Controls Console Top Mounted Hydraulics Roll Out Bolster (Table) Tilt Down Ram (180º) SPECIFICATIONS SUBJECT TO VERIFICATION