Used spot welding machines for sale (144)

Condition: good (used), 1 used water-cooled spot welding machine Technical data: Max. welding power: 23.7 kVA Rated power at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Coolant flow rate: 4 l/min Weight: 77 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Hedpfsy Naq Iex Acgsfl

Condition: good (used), functionality: fully functional, DALEX PMS 10-4 powerful and robust industrial spot welding machine, supplied as a ready-to-use set with a matching COHLINE water cooling unit. Highlights & Condition Hsdpfx Acszz H Eyogsfl Extremely low operating hours: The installed digital DALEX MPS 100 controller shows an original counter reading of only 13,282 cycles. For an industrial machine of this class, this indicates exceptionally low use and minimal wear. High electrode force: This model provides a powerful electrode force of up to 690 daN, enabling reliable welding points even on thicker sheet metal. Cooling unit included: Thanks to the powerful COHLINE cooling unit with 5.8 kW cooling capacity, the machine is suitable for continuous industrial operation without overheating. Flexibility & Safety: Equipped with a key switch for easy selection between operation via foot switch or two-hand safety control panel. Technical Data at a Glance DALEX PMS 10-4 Spot Welding Machine Maximum welding power: 294 kVA Rated power (50% duty cycle): 80 kVA Maximum short-circuit current: 51.7 kA Supply voltage: 400 V / 50 Hz No-load voltage: 3.5 to 7 V Electrode force: 115 to 690 daN Controller: DALEX MPS 100 with digital display Machine weight: approx. 465 kg COHLINE WRK 245-53 Cooling Unit – Year 2000 Rated cooling capacity: 5.8 kW at 32°C ambient / 15°C water temperature Refrigerant: R407C, 4.0 kg Supply voltage: 400 V / 50 Hz Fuse protection / Current consumption: 16 A / 9.0 A Operating cycles: 13,282 cycles Everything from a single source: We will be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), pneumatically operated, water-cooled spot welding pliers with manual control valve Manufacturer: DALEX, Type 3238 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm extension: 500 mm Hjdpfxoz Ak H Ds Acgofl with double-acting cylinder: long stroke 75 mm, pre-stroke 50 mm, working stroke 0-25 mm with universal joint suspension and clamping bow 10 m connection cable with control cable also included: 1 piece DALEX synchronous control unit RS 12 with 3 m connection cable and 32 A CEE plug

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Medium-frequency spot welding machine – also suitable for welding aluminium. Rated power at 20% duty cycle: 180 kVA Max. welding power: 315 kVA Adjustable reach: 300 to 800 mm Arm spacing (min/max): 150–400 mm Electrode stroke: parallel stroke Electrode force adjustable up to 600 daN Weight: approx. 660 kg Welding control unit: Dalex L 4-6 Cooling water flow rate: 10 l/min Operating instructions and manual are available Hsdpfxezz Rips Acgsfl Working stroke triggered by pneumatic foot pedal Very good, well-maintained condition

Condition: refurbished (used), Power at 50%: 25kVA Short circuit-current: 22,4kA Electrode force: 17-178daN Throat depth: 180-500mm --- Weld control: RS 17 (5-times, 2-program) --- Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months Hjdpfx Aoz Alfnscgofl --- Spotwelding electrodes + spare parts at stock

Condition: used, This DALEX spot welding system will be auctioned off online as part of our industrial auction / machine auction follow-up auction, J&S GmbH Automotive Technology - Machine Park. You can find this and many other items on our platform. Hjdpfx Acszyf Rxjgsfl

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Hfjdpfszzv Hmjx Acgel Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs Manufacturer: DALEX, Type 3329 with double-acting cylinder, long stroke 60 mm, pre-stroke 40 mm, working stroke 0-20 mm Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 17 kA Secondary open-circuit voltage: 4.7 V Electrode force: 440 daN Arm outreach: 350 mm Arm spacing: 300 mm with universal joint suspension and suspension bracket Hfodpfx Acozymccegsl 10 m connection cable and control cable with Harting connectors for connection to auxiliary control unit B 200 with synchronous welding control MPS 10

Condition: good (used), Year of construction: 2001, machine/vehicle number: ZAC-N-14354, Offer 26162 Technical data: - Rated power at 50% duty cycle: 80 kVA - Max. welding power: 211 kVA - Reach: 350 mm - Welding parameters: - Steel sheet: 8 + 8 mm - Brass sheet: 4 + 4 mm - Aluminum sheet: 4 + 4 mm - Electrode force, adjustable: 100 - 600 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 12 l/min - Control system: DALEX MPS 8043-1 for: - Holding time; current time; - Post-flow + open-arc time, as well as - Rise time + pulse + pause time - Power supply: 400 V - Space requirement: approx. W 950 x H 2100 x D 1500 mm - Weight: approx. 600 kg Hfedpfxozfigzo Acgsl - Includes: - Complete electrical and pneumatic system - Foot-operated switch

Condition: new, Year of construction: 2025, Power at 50%: 100kVA Short circuit-current: 41,5kA Electrode force: 100-600daN / double stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Hfedpoxl Ur Aofx Acgsl Warranty: 12 months --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, Power at 50%: 80kVA Short circuit-current: 35kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Warranty: 12 months --- Spotwelding electrodes + spare parts at stock Hfjdpfxexl Uude Acgjl

Condition: new, Year of construction: 2025, Power rating at 50%: 2,5kVA Short-circuit current: 8,2kA Electrode force: 120daN (at 125mm Throat depth) weight: 11kg Hfjdpfx Acjxl Uqxjgjl --- with Electrode arm 125mm --- welding control --- warranty: 12 months

Condition: refurbished (used), Power at 50%: 25kVA Short circuit-current: 12kA Electrode force: 120daN / single stroke Throat depth: 150mm --- Weld control: AR.01 (5-times, 2-program) --- Extra Equipment: - doppel foot pedal "currentless contact" - forearm support Hfsdpfxjw Natbo Acgel --- Warranty: 12 months --- Spotwelding electrodes + spare parts at stock

Condition: good (used), – Power output: 15 kVA Hfsdpjzwkttsfx Acgol – Pneumatic – 380V

Condition: excellent (used), pneumatically operated, water-cooled toggle-lever spot welding machine Manufacturer: DALEX, Type: SL 202 Rated power at 50% duty cycle: 20 kVA Secondary short-circuit current: 15 kA Electrode force: 420 daN Reach: 130 - 500 Hjdpfx Ajzw U T Docgefl Arm distance: 250 mm Single-acting cylinder - 50 mm stroke with main switch according to VDE 0113 with synchronous welding control RS 17 PICTURES TO FOLLOW

Condition: excellent (used), Mobile water-cooled unit with refrigeration compressor Manufacturer: DALEX, Model: DRF 4 Cooling capacity: 4.2 kW Compressor power: 0.92 kW Water tank capacity: 90 liters Hfedpszuy Hksfx Acgel Dimensions in mm (W/H/D): 900 / 1020 / 600 Weight: 156 kg Suitable for resistance welding machines with a rated power of up to 160 kVA.

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 Hfsdpfx Ajh N Sd Uscgol - weight approximately 330kg Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: refurbished (used), Power at 50%: 100kVA Short circuit-current: 41,5kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Extra Equipment: - doppel foot pedal "currentless contact --- Hfedpfozwhi Ssx Acgol Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Year of construction: 2008, throat depth: 680 mm, nominal power at 50% duty cycle: 45 kVA, input voltage: 400 V, Combined roll seam and spot welding machine, type UN63 - Roll seam welding - Rated voltage 400V/50Hz - Rated power 45kVA - Welding current 15kA - Fuse rating 125A - Overhang 670mm - Upper roller diameter 175mm - Lower roller diameter 120mm - Arm distance 350mm - Electrode force 500daN - Stroke approx. 30mm - TE500 control unit with 99 welding programs, parameters for each program, digital current display after each weld, current monitoring, stepper function, Language selection: German, English, Italian, French, etc., with operating manual - 2-stage foot switch according to UVV standards - Machine main switch - Pneumatic maintenance unit Hfodpezh Izcofx Acgjl - Weight approx. 680kg - Documentation with circuit diagram, compressed air diagram, and cooling water circuit - VAT can be shown separately - Spot welding fixture / electrode holder and lower arm available at an extra cost. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment. On-site commissioning is subject to a fee, billed according to actual effort.

Condition: excellent (used), hand-operated, water-cooled spot welding tongs with dual-stroke mechanism and short-stroke stop Short stroke: 25 mm - Long stroke: 57 mm Manufacturer: DALEX, Type: A 3119 Rated power at 50% duty cycle: 8.0 kVA Secondary short-circuit current: 9.5 kA Electrode force: 180 daN Hfedpfx Aszua Hkjcgjl Arm spacing: 120 mm Arm outreach: 250 mm also included: DALEX control unit RS 11-2 with connection plug 16 A CEE extensive range of electrode arms (all water-cooled) in stock

Condition: excellent (used), Foot-operated, water-cooled rocker-arm spot welding machine Manufacturer: DALEX, Model: SF 8-2 Hsdpfsztyn Sjx Acgsfl Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA 4-stage switch Electrode force: 235 daN Arm extension: 80-300 mm With synchronous welding control RS 11-2 With main switch

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs Manufacturer: DALEX, Type: 3238 with double-acting cylinder and manual control valve Long stroke: 75 mm – Pre-stroke: 25 mm – Working stroke with stroke adjustment: 0-25 mm Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Hfsdpfsztmb Eox Acgsl Arm extension: 350 mm with universal joint suspension and suspension bracket 10 m connection cable included: Synchronous welding control RS 12 with main switch and 32 A CEE plug.

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Rated power at 50% duty cycle: 63 kVA Hfedpfx Aozrupzscgsl Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Electrode force: 390 daN Reach: 250-550 mm Arm distance: 150 or 310 mm with mounting control cabinet according to VDE 0113 Main switch Synchronous welding control 15036

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine, type PMS 11-4 G3, 3-phase DC version - specifically designed for welding aluminum sheets - rarely used, completely inspected and cleaned - fully functional, ready for demonstration - rated voltage 400V/50Hz - rated power 96 kVA - welding current 23 kA - connection cable cross-section 10 sq mm/phase - fuse rating 63A - arm reach 1050 mm (!!) - electrode arm diameter 60 mm - electrode holder diameter 30 mm Hjdpfx Ajh N Sc Eecgjfl - electrode force 600 daN - stroke 65+25 mm - electrode cone MK2 - control unit MPS 8043/1 from Harms & Wende with current ramp-up and pulse function - with operating manual - 2-stage foot switch according to UVV standards - main machine switch - pneumatic maintenance unit - weight approx. 830 kg - complete documentation with wiring diagram, compressed air circuit diagram, and cooling water circuit - VAT can be shown separately - delivery from warehouse in Dresden approx. 4 days within Germany - export may take longer! On-site commissioning is subject to a charge and will be billed according to the actual effort involved. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment.

Condition: excellent (used), functionality: fully functional, nominal power at 50% duty cycle: 14 kVA, input voltage: 380 V, type of cooling: water, overall weight: 300 kg, welding power (max.): 40 kVA, arm spacing: 450 mm, total width: 450 mm, total height: 1,450 mm, total length: 1,100 mm, stroke length: 110 mm, input frequency: 50 Hz, Spot welding machine Soudometal SP14P maximum welding current at 50 ED: 14 ​​kVA max. welding power 42 kVA Electrode force: 30-200 DAN Electrode stroke = 30-110 mm Projection: 450 mm Mains connection 380V / 42A secondary current continuous current 1.85 kA; kA short-circuit current 12.5 kV; Electrode force: 30-200 DAN foot control Cooling water volume: 3 l/min Electrode arm Ø: 45 mm Electrode holder Ø: 25 mm Machine weight: 300 kb kg Dimensions: 1250x1100x450 mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Hjdpfx Acewkr Insgjfl Your ad has been automatically translated. Translation errors are possible.