Used sheet metal deburring machines for sale (94)

Condition: excellent (used), Year of construction: 2010, operating hours: 10 h, functionality: fully functional, machine/vehicle number: G2372-13, working width: 900 mm, working height: 1,190 mm, grinding belt length: 1,900 mm, grinding belt width: 930 mm, The machine has been used little and has only 10 operating hours! TECHNICAL DATA Area of application: Grinding, removing, and calibrating workpieces Working width: 900 mm Grinding belt dimensions: 930 × 1,900 mm Table opening: 1 – 125 mm Todewa Ubcopfx Ahuof Raised table opening: up to 250 mm Constant working height: 1,190 mm Speed and feed rate Speed of units: 11 and 22 m/s Frequency-controlled feed rate: 4 – 11 m/min MACHINE DETAILS Machine weight: 2,100 kg Grinding equipment Grinding belt units: 2 Motor: Two-speed motor Contact roller height adjustment: Handwheel for adjusting pressure or belt thickness Height adjustment display: Electronic digital display of the feed table height in mm Motor for contact roller unit: for Finish Sanding Voltage: 400 V Phases: 3 Frequency: 50 Hz Total Current: 62 A Power: 31.68 kW EQUIPMENT - 2 sanding belts - Rubber-coated steel rollers - Dust extraction

Condition: reconditioned (used), Year of construction: 2017, operating hours: 3,862 h, functionality: fully functional, Used machine Year of manufacture: 2017 General Specifications: Max. working width sanding belt unit: 1350 mm Sanding belt dimensions (W x L): 1380 x 1900 mm Outside brush diameter: 350 mm Table opening: 0 – 100 mm Minimum workpiece size: 50 x 50 mm Feed speed, frequency-controlled: 0.5 – 8 m/min Electricity 1st Unit – W – sanding belt: 11 kW 2nd Unit – RB – rotary brush unit: 1.5 kW Brushes: 4 x 1.5 kW (6 kW) Feed motor, frequency controlled: 2.6 kW Vacuum pump: 15 kW Electrical connections: 400 Volt Frequency: 50 Hz Compressed air only for sanding belt unit Required air pressure: 6 bar Consumption: 160 l/min Todpfsw Dzytex Ahusf Dust extraction at 100 mm WS Sanding belt unit: 2000 m³/h Vacuum pump: 1500 m³/h Weight: approx. 6000 kg Includes one set of brushes and starter set of sanding belts. New extraction system optionally available. Machine has been technically overhauled (conveyor belt and bearings are new, value approx. €20,000) Immediately available.

Condition: new, Year of construction: 2025, machine/vehicle number: ZCV50, ZCV 50 CIRCULAR TYPE VIBRATORY MACHINE * Net volume of 50 liters (Capacity from 20 L to 1250 L is available upon request) * Highly wear-resistant polyurethane (PU) lining (90 Shore) MOTOR: * High-performance three-phase drive motor * 0.34 kW, 1500 rpm Tedpfx Ahsw Dp Ekjuof * The motor is maintenance-free – no motor lubrication is required. CONTROL PANEL: * Main switch and emergency stop switch * Timer and working hours counter * Control box with switch for motor right/left rotation * CE safety standard PAINTING: * Colour in RAL 5011 & RAL 7036 * Epoxy paint is used to ensure long-lasting coating durability.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,000 mm, type of input current: three-phase, sheet thickness (max.): 70 mm, sheet thickness steel (max.): 70 mm, sheet thickness aluminum (max.): 70 mm, sheet thickness copper (max.): 70 mm, sheet thickness brass (max.): 70 mm, total length: 3,800 mm, total width: 1,600 mm, total height: 2,250 mm, workpiece weight (max.): 500 kg, overall weight: 3,200 kg, working height: 70 mm, input voltage: 400 V, warranty duration: 12 months, pass-through width: 1,000 mm, table length: 3,560 mm, table width: 1,000 mm, workpiece height (max.): 70 mm, input frequency: 50 Hz, workpiece width (max.): 1,000 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,000 mm, height adjustment type: mechanical, input current: 75 A, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are pleased to introduce our premium-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable and experienced company specializing in metal and woodworking machinery. Todpfx Ahowzv U Hjuof With decades of know-how and innovation, Madora is recognized for providing robust, efficient, and user-friendly solutions tailored to the requirements of industrial clients throughout Europe. Our machines deliver precision, high performance, and long-term dependability—all at competitive prices. The GL 1000 PZZR is a versatile deburring machine featuring four machining stations to guarantee top-quality finishing of your workpieces. The initial abrasive belt unit, together with two oscillating and rotating "Z" type units, enables comprehensive surface grinding as well as both standard and heavy-duty deburring in the preliminary stages. The final rotating station is dedicated to intensive edge rounding, ensuring perfectly finished edges on your parts. The configuration of the processing units allows for highly flexible operation after processes such as plasma or laser cutting. The abrasive belt efficiently removes excess material during deburring and grinding, making it ideal for eliminating burrs and heat-affected zones from laser-cut components. Multiple sandpaper types can be used with the abrasive belt unit to achieve specific finish requirements. The rotating unit employed in the GL 1000 PZZR is designed for heavy edge rounding and can produce an R2 profile on thicker workpieces, making it an optimal solution for demanding industrial applications.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, For sale is a used AMADA model BR-610W deburring / wide-belt grinding machine, manufactured in Japan in 1998. The machine is in good technical condition and is designed for precise deburring and grinding of sheet metal. Technical Data (based on nameplates and technical parameters): ● Manufacturer: AMADA, Kanagawa Japan ● Model: BR-610W ● Year of Manufacture: 1998 ● Serial Number: 61200070 ● Working Table Width: 610 mm ● Wheel Motor Power: 5.5 kW ● Conveyor Drive Motor Power: 0.4 kW ● Conveyor Up Down Motor Power: 0.1 kW ● Oscillation Motor Power: 0.4 kW ● Coolant Pump Motor Power: 0.25 kW ● Spindle Drive Power (from technical parameters file): 16 kW ● Voltage: 230/400/460 V, 3 Phase ● Frequency: 50/60 Hz ● Total Motor Power: 18.98 / 28.65 / 19.84 / 27.41 (various power configurations for different voltages) ● Transformer: ○ TR1: STK0.28, Phase 1, Capacity 0.3 KVA ○ TR2: STK1.4, Phase 1, Capacity 1.2 KVA ○ Total Transformer Capacity: 1.5 KVA ● Machine Height: 1574 mm ● Machine Length: 2050 mm ● Machine Width: 1317 mm Tjdpfxowrzvds Ahujf ● Net Machine Weight (from nameplate): 1200 kg ● Machine Weight (from technical parameters file): 1.2 t

Condition: like new (used), Year of construction: 2019, 2 sanding units with inverter Todpowqrtqsfx Ahuof predisposition for 3rd unit Suction table Working width 950 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,980 h, functionality: fully functional, working width: 1,300 mm, Wet deburring machine TECHNICAL DETAILS Working width: 1,300 mm Working height: 900 / 1,000 mm Sanding belt length: 2,620 - 3,250 mm Tjdpfovfpvysx Ahujf Number of units: 2 (sanding belt + vertical brushes (XVS)) Pre-treatment: Drying + air pressure Mist extraction: available Control system: PLC VISION

Condition: new, Year of construction: 2023, functionality: fully functional, - 1 set of cleaning tools included with the machine - 3-phase power supply - 5-pin electrical plug - Includes transport and storage trolley The support bar cleaner from BMZ ensures a longer service life of the support bars through multiple cleaning. Tedpfswpulasx Ahuef It cleans quickly and easily, without the need to remove the bars for cleaning. This saves valuable time! Cleaning a complete pallet in the standard size of 1500 x 3000 mm takes about 30 minutes. With laser cutting machines with a pallet changer, users can even clean the bars while cutting. The BMZ Pro Cleaner removes slag from even heavily used bars and automatically adjusts to different slag thicknesses up to 25 mm. It is also suitable for stubborn stainless steel slag. Regular cleaning increases process reliability and the quality of the produced parts.

Condition: new, Year of construction: 2025, functionality: fully functional, sheet thickness (max.): 5 mm, total length: 950 mm, total width: 850 mm, total height: 1,175 mm, overall weight: 80 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.1 kW (1.50 HP), power: 1.1 kW (1.50 HP), Equipment: documentation/manual, CENTRIFUGAL DRYER MACHINE METAL CENTRIFUGAL DRYER Technical Specifications: Dryer Body Material: 5 mm iron thickness, painted with acid-resistant paint. Diameter: 58 cm Height: 80 cm Tedpfx Asrkl Unehusf Drying Basket Material: 1.5 mm stainless steel thickness, electropolished. Diameter: 44 cm Height: 32 cm Basket Volume: 50 liters Speed: 3000 rpm Centrifugal Motor: Power: 1.1 kW 3000 rpm Drying Fan Material: Aluminum Cast Motor Power: 0.25 kW Speed: 3000 rpm Heater Power: 2 kW heating tube External Dimensions: L: 850 mm W: 850 mm H: 1175 mm

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,000 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,230 mm, total width: 1,600 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 3,580 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, pass-through width: 1,000 mm, table length: 3,470 mm, table width: 1,000 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,000 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,000 mm, height adjustment type: mechanical, input current: 71 A, number of spindles: 9, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer Todewzttgspfx Ahuef We are pleased to present our high-quality deburring machines, produced in Poland by Madora Sp. z o.o., a reputable and experienced manufacturer specializing in metalworking and woodworking machinery. With decades of expertise and innovation, Madora is renowned for delivering durable, efficient, and user-friendly solutions tailored to the needs of industrial customers throughout Europe. Our machines are engineered for precision, performance, and long-term reliability – all at competitive prices. The GP1000-4Z is a versatile deburring machine designed for post-cutting cleaning of sheet metal. Equipped with four "Z" type processing units, it offers outstanding versatility and processing capacity. What does this mean in practice? It allows for up to four operations simultaneously: not only does it remove scale following plasma cutting, but it also deburrs and rounds off workpiece edges after laser cutting – all in a single pass. The extensive processing range, including sheet thicknesses and widths up to 1,000 mm, makes it suitable for both small and large workpieces. With the appropriate tooling, the machine is also ideal for heavy edge rounding and oxide removal. The GP1000-4Z deburring machine features a TFT touch-screen panel, providing the operator with complete and continuous control over parameters such as workpiece thickness, feed speed, and tool rotation speed. Each unit can be operated independently, enabling the operator to select which processing steps to perform in a single pass.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2316-01, working width: 600 mm, Type 41 Series 600 WRD Working width 600 mm Tjdpsr Nbpbofx Ahuef Ideal machine for deburring and finishing of metal products Equipped with grinding belt and disc/brush aggregate

Condition: new, Year of construction: 2023, total length: 13,000 mm, total width: 8,000 mm, total height: 17,000 mm, workpiece weight (max.): 500 kg, overall weight: 600 kg, BMZ Manual Deburring Machine BMZ M1 Thanks to its vacuum table, the BMZ M1 allows for simultaneous deburring of multiple parts by hand. Two different brushes can be installed on the system, and changing the brushes is very quick and easy. Because the brush is positioned parallel to the table, it enables more even grinding. The system's motor weight is balanced, making it ergonomic for the operator. With the BMZ M1, you achieve maximum quality at a minimal cost. Application Areas Tedpfx Ahorp Dp Njuef Edge Rounding Deburring Slag Removal Oxide Layer Removal Polishing

Condition: new, Year of construction: 2025, * 60 lt Capacity * 2,2 kW High performance three phase current drive motor. Tjdoh Nnbcepfx Ahuef * Adjustable speed control up to 200 rpm. * Control panel and dosing pump included. - The dosage pump automaticly puts the chemical to the bowl * Working hours timer * PU or INOX plate * Changeable valve for the wastewater decharging. * Inner bowl has canals and gaps for ensuring non stick wall.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,000 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,230 mm, total width: 1,600 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,200 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, pass-through width: 1,000 mm, table length: 2,000 mm, table width: 1,000 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,000 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,000 mm, height adjustment type: mechanical, input current: 39 A, number of spindles: 9, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are pleased to offer our premium deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable company with extensive experience in the production of metalworking and woodworking machinery. With decades of expertise and innovation, Madora is recognized for delivering robust, efficient, and operator-friendly solutions tailored to the needs of industrial clients throughout Europe. Our machines are engineered for precision, performance, and long-term reliability – all at competitive prices. Tedpfx Aowztn Dohujf The GP 1000 2Z is an outstanding, versatile deburring machine designed for cleaning sheet metal after various cutting processes. This model is fitted with two ‘Z’-type oscillating and rotating heads. What does this mean in practice? It allows for two operations to be performed simultaneously: not only does it efficiently remove scale after plasma cutting, but it also deburrs and rounds off the edges of workpieces following laser cutting. The broad range of working thicknesses and widths of up to 1,000 mm make it possible to process both small and large components. With suitable tooling, the machine is also capable of heavy edge rounding and oxide removal. The GP 1000 2Z deburring machine features a TFT touch-screen control panel, enabling the operator to continuously and precisely manage machining parameters such as workpiece height, feed rate, and tool rotation speed.

Condition: new, functionality: fully functional, working width: 1,300 mm, warranty duration: 12 months, workpiece width (max.): 1,300 mm, RWT deburring machine possible configuration Four-station machine: 1. deburring with contact roller grinding belt 2. cup brush for oxide layer or slag removal 3. cup brush for edge rounding 3. finish sanding via contact roller The BSM series machines can be equipped with the following work units: Sanding unit with sanding belt (R) - removes burrs that protrude above the surface of the material, removes scale and corrosion from the surface Planetary disk brush unit (D) - rounds the edges, creates radii and removes the oxide layer on the sides after laser cutting. Rotary unit (A) with finned brushes - deburring and edge rounding without foil removal, surface uniformity. Brush unit made of abrasive fleece (B) - pre-cleans and polishes surface material These deburring machines are used for the following tasks: Tsdoudal Dopfx Ahuof deburring parts after laser cutting - deburring edges, removing oxide and finishing the surface Deburring of parts after plasma cutting - slag removal, rust removal, removal of material overflows, edge rounding and surface finishing. Deburring of parts after punching - removal of sharp edges, edge rounding and final surface finishing. Deburring of parts after water jet cutting - deburring and rounding of edges, removal of marks after water jet cutting and final surface treatment. Deburring of stainless steel parts covered with foil - deburring and edge rounding without foil removal. Main advantages of the machine: Modular system - we design the machine exactly to your requirements High-quality and uniform deburring of all edges of the product Processing of very small workpieces with the magnetic or vacuum table Very easy operation of the machine thanks to the Schneider Electric touchscreen Grinding, deburring and finishing with one machine Very quick change of tools and rigid machine frame In view of the large number of possible machine configurations, we recommend a personal consultation and free grinding samples at our premises, which we use to assess our customers' requirements and then propose the most suitable machine configuration for the production in question.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS125, total width: 870 mm, total height: 950 mm, overall weight: 185 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 150 mm, workpiece length (max.): 150 mm, ZCVS 125 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 125 liter volume * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. Todsh Agr Hepfx Ahuef * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5011 & RAL 7036 *Epoxy paint is used to ensure long life of the paint

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,500 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,830 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,700 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, pass-through width: 1,500 mm, table length: 2,000 mm, table width: 1,500 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,500 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,500 mm, height adjustment type: mechanical, input current: 61 A, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer Tjdpfx Ahjwzvkhjuof We are proud to offer our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable and experienced company specializing in metal and wood processing machinery. With decades of expertise and innovation, Madora is recognized for delivering robust, efficient, and user-friendly solutions tailored to meet the demands of industrial customers across Europe. Our machines are engineered for precision, performance, and long-term reliability—always at competitive prices. The GP 1500 3Z is a versatile, high-capacity deburring machine designed for cleaning sheet metal following various cutting processes. Equipped with three independent "Z"-type machining units, this model features outstanding flexibility and throughput. In practical terms, the machine can perform up to three operations simultaneously: not only does it efficiently remove scale and slag after plasma cutting, but it can also deburr and round the edges of laser-cut parts—all in a single pass. The GP 1500 3Z accommodates a wide range of material thicknesses and workpiece widths up to 1,500 mm, making it ideal for both small and large components. With the appropriate tooling, the machine is also well-suited for intensive edge rounding and oxide layer removal. Operator convenience is ensured by a TFT touchscreen control panel, which provides continuous, comprehensive management of all machining parameters, including workpiece height, feed speed, and tool rotation. Each unit is independently controllable, allowing the operator to select the required processing stages for every pass.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25-1361, total length: 775 mm, total width: 550 mm, total height: 775 mm, overall weight: 100 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 0.34 kW (0.46 HP), power: 0.35 kW (0.48 HP), workpiece length (max.): 525 mm, Equipment: CE marking, documentation/manual, emergency stop, ZTV 50 Trough type vibratory machine * Highly wear resistant P.U.Lining (90 Shore) Todpfx Aewb Hhdehuof * High performance three phase current drive motor. (Italian OLI Brand – 0,34 kW) * Changeable valve for the wastewater decharging * Control panel(EU Standarts) included * Main swicth and emergency stop switch. * Timer and working hours timer * CE safety standard * Dosing pump included. * The machine has noise isolation lid and metal machine cabinet - The cover is controlled by hand manually - The sound isolation cover provides significant noise reduction when the finishing process is in play. - It also curbs water or finishing compounds spillage from the vibratory finishing machine.

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) Todpfsh I N Udox Ahujf * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer * Special construction of control panel(EU Standarts) included