Used Cl500 Q for sale (244)

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Hsdpfxox Hqlwe Aa Eog Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Condition: new, Machine for grinding, deburring, rounding and polishing, manual, mobile use with vacuum system, alternatively also with magnetic system, starter kit and 1 brush CE-certified, designed with double emergency stop circuit and reset system Weight 445 kg Dimensions 1435x1100x1510mm high Working height 950 mm Work surface 1280x780 mm Minimum workpiece dimensions 20x20mm Maximum workpiece height 120 mm Maximum width of workpiece: unlimited length, with maximum width 780 mm Maximum workbench load 100 kg Operation: Double manual operation Number of work stations 1 Quick holder for brush M14x2 left-hand thread M14x2 right-hand thread for abrasives Brush design Disk brush Ø150mm with quick-change system Various brush variants possible, depending on material, we will be happy to advise you. Bia2Qk2S2I Brush power 0.75kW frequency-controlled motors Hjdjt Dpxbspfx Aa Ejg Brush motor speed 150 - 1500 r.p.m. Workbench Carpet / Special friction design Vacuum system fixation in the workbench (standard) Vacuum system kW 2.2 kW Also available with additional magnets as an option (available from stock) Electrical values Voltage V 400 V (3L+N+PE) Frequency Hz 50 Hz Current A 10 A Power kW 6 kW Plug-in device CEE 400 V / 16 A (5-pole)

Year of construction: 2023, condition: new, A hand-operated budget table grinding machine for the deburring, grinding and edge rounding of sheet metal parts. The ProGrinder is a manually operated deburring machine which is suitable for finishing sheet metal parts. With the ProGrinder you can deburr semi-automatically for an attractive price. With this machine, Q-Fin gives you the possibility to achieve high-quality edge rounding with little effort, simply remove burrs and even polish the surface to a high-gloss finish. Optionally, you can also mount an orbital head on the ProGrinder so you can apply a nondirectional finish to the product. Hjdpslbmm Ejfx Aa Eeg New machine from 2023, can be delivered from stock. Ask us about the attractive price. Machine comes with 1 year warranty (excluding wear parts). Machine is located in Bergeijk, NL. Machine Power Supply: 230 V |50 Hz | 4 A | 1kW Maximum workpiece height: 120 mm Maximum workpiece width: 780 mm / Lengte onbeperkt Dimensions (LxWxH): 1435 x 1100 x 1510 mm

Condition: used, functionality: fully functional, power: 6 kW (8.16 HP), Year of construction: 2016, First Q-Fin Top Grinder model from 2016, lightly used. Fully operational and tested. Technical specifications: Machine power: 400 V, 50 Hz, 6 kW, 10 A Table size: 1200 x 780 mm Max. workpiece width: 780 mm Max. workpiece length: unlimited Workpiece clamping: vacuum Machine dimensions: 1330 x 1287 x 1520 mm (length x width x height) Machine weight: 300 kg The Q-FIN TOPGRINDER is a semi-automatic universal metal surface finishing machine featuring a robust, ergonomic construction. With the appropriate tool selection, this machine allows you to remove burrs, grind surfaces, round sharp edges, remove slag, eliminate oxidation, and/or polish your products. Hedpsxy Nr Hjfx Aa Eeg The TOPGRINDER employs an integrated vacuum clamping system built into the working table for securing workpieces. The TOPGRINDER features two tool stations, which can be equipped with different types of tools. You can mount various grinding tools, from standard tools with M14 mountings to QUICK RELEASE disc brushes. Grinding pressure can be adjusted using the balancing lever. The working table measures 1280 x 780 mm. Workpiece length is not limited, as the side table panels can be easily lowered to accommodate longer parts. The front table panel can also be folded down for processing wider components. With the Q-FIN TOPGRINDER, work becomes not only more comfortable and faster but also safer. The machine is fitted with an integrated two-button safety system that requires both of the operator’s hands to be away from the work table for operation to begin.

Condition: used, Leybold A700 Q deposition system (ebeam) Hedpeuhcnijfx Aa Eeg Leybold A700 deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit (Leybold) Vacuum pump Leybold D40-65B + Diffusion pump 2kW Proceschamber: Size: Width 680mm x Height 680mm x Depth 550mm Substrateholder diameter 650mm Incl. shielding Oring door Heaters Basepressure low 10-6mbar Electronics: Baseline cabinet (eneeds upgrade) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 37.500,-

Condition: new, Year of construction: 2020, conveyor belt width: 900 mm, conveyor belt speed: 167 mm/s, total width: 10,000 mm, total height: 3,000 mm, Equipment: emergency stop, 1 pc. lift conveyer driven 3000x1000 mm. 1 pc. lift conveyer driven 1300x1000 mm. 1 pc. conveyer not driven 3000 x1000 mm. 1 pc. conveyer not driven 4500x1000 mm. Hsdpjtltklofx Aa Esg 1 pc. Pallet magazine for EUR pallets 1500x900 mm.

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. Hjdpfx Ajhnc E Aea Esg The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. - Mobile and compact setup - Standard with vacuum system 2.2 kW - Optional with 2 or 4 electromagnets - Equipped with 2 grinding heads Hedoixz Hdjpfx Aa Eeg - Bracket with double hand control (CE marking) - Workpiece width: max. 780 mm / length unlimited - Power consumption of machine: 400 V, 50 Hz, 10 A, 6 kW - Dimensions: 1435 x 1100 x 1510 mm (L x W x H)

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. Hjdpfx Aael Dw D Ee Eeg We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: excellent (used), Year of construction: 2018, Heidenhain iTNC 640 CNC control Table dimensions: 1800 x 2200 mm Max. workpiece weight: 25,000 kg X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,600 mm Spindle/cone diameter: 130 mm Speed range: 3,000 RPM Spindle power: 46 kW Max. torque at 100% duty cycle: 1,000 Nm Machine weight: 38,000 kg Power-on hours: 16,631 Spindle hours: 4,430 Accessories: – Controlled B-axis Hsdpow Hbnvsfx Aa Ejg – 40-position tool changer / chain-type magazine – Belt filter system with high-pressure pump – Chip conveyor – Heidenhain TS 460 workpiece probe – Automatic milling head type HUI 50 – Movable operator cabin Yp = 1,600 mm, Zp = 600 mm – Centralized lubrication system – Pfannenberg oil cooler – Documentation

Year of construction: 1989, condition: excellent (used), - 30T Hodsnr R Hkepfx Aa Ejg – soundproofing booth - working area 1250x2000 mm. repositionable – turret with 40 stations, 2 of which are indexed – CNC and Fanuc electronics – wide set of punches and dies – additional sheet metal sliding surface with flap - compliance with safety regulations with relative sworn appraisal machine installed, in operation until 2019 - availability for any test - use and maintenance book.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 125 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 3,300 rpm, table length: 1,600 mm, table width: 1,400 mm, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, The machine is in good technical condition, after repair in 2024, Heidenhain iTNC 530 control system. Spindle center cooling CHOV 10 bar, magazine for 40 tools. Hedpov Amm Dofx Aa Eog

Condition: used, This listing is for the Qiagen Rotor-Gene Q (Parts Only) The Qiagen Rotor-Gene Q is a high-performance real-time PCR cycler known for its unique rotary design and precision thermal control, offering exceptional uniformity and optical performance. This specific configuration includes 2 optical channels (Green and Yellow), making it ideal for targeted applications such as gene expression, viral detection, and SNP genotyping. Key Features Rotary Air Chamber Design: Ensures uniform thermal conditions and eliminates edge effects. Hsdpfx Aexv A Awoa Ejg 2 Optical Channels: Green and Yellow channels support common fluorophores such as FAM, HEX, and VIC. Rapid Cycling: Heating rate >15°C/s and cooling rate >20°C/s. High Sensitivity: Fast fluorescence acquisition (≤4 seconds

Condition: used, Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Homogenizing stage / effect: 2 Hsdpex Riynsfx Aa Esg Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12048

Condition: good (used), Year of construction: 2002, DC motor, motor, electric motor -Volt: 48 V -Speed: 2000 rpm Hjdpfst Apmvex Aa Eeg -Power: 2 kW -Design: B3 -Quantity: 2 pieces available Price: per piece

Condition: ready for operation (used), Heidenhain LE 355 Q control . 238 324 99 SN:2937133 , used, normal signs of wear, 100% functional, scope of delivery as per photos Hsdei Eam Dspfx Aa Eeg

Condition: used, Year of construction: 2006, operating hours: 2,706 h, Type of fuel: Electric Empty weight: 3.010 kg Dimensions (LxBxH): 195 x 115 x 215 cm Lifting capacity: 1.500 kg Lift height: 336 cm Clearance lift height: 150 cm Fork dimensions: 1.150 x 700 mm - Year: 2006 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 720803 - Operating hours: 2706 - Lifting capacity: 1500kg - Lifting height: 3360mm - Overhead clearance: 2150mm - Free lift: 1500mm - Fork length: 1150mm - Maximum fork width: 700mm Hedpfowfpr Tex Aa Eeg - Minimum fork width: 0mm - Number of wheels: 3 Wheels - Attachment: Side-shift - Options: Non-marking tires, Free-lift, Work lights - Mast: Duplex - Inspection valid until: 10.2025 - Drive: Electric - Brand/Type: Hawker - Battery year of construction: 2006 - Capacity: 460Ah - Battery voltage: 48V - Transport dimensions: 1950mm x 1150mm x 2150mm (l x w x h) - Transport weight [kg]: 3010kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). Hsdevcnpaepfx Aa Esg The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 320 kg, CMC ITALIA COVERMAKER Model: LPS (50 x 70) Semi-automatic case maker for the production of book covers. Hot glue mounting for board and packaging It will also work with cold adhesive. Cover papers: 100 - 170 gsm Cover boards: 1.5mm - 4.0mm Power requirements: 400 volt - 2kw - 50Hz Weight: 320 kgs Year of construction: 2005 Fully working order. Specification: Min size: 12mm x 15mm Max. size turned edge: 50 x 70mm Max. size edge-to-edge: 52 x 74mm Minimum Height of Case 105 mm Paper thickness 100g/m2 – 170g/m2 Hjdeu Ivx Dspfx Aa Eog Board thickness: 1.5mm – 4mm Electrical requirement: 400/440v - 2.0 Kw - 3 phase + neutral External air supply requires: 6 bar pressure Dimensions: length 3100mm (including delivery tray), Height 1200mm (including storage shelf), Width 1050mm.

Condition: used, Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Hedox Riyhopfx Aa Eeg Number of pistons: 5 Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12049  

Condition: good (used), Compressed air filter, fine filter -Connection: 2" inch -Number: 3 filters available Hjdpfjb A Ni Eex Aa Esg Price: per piece

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Long text as PDF attachment! Brief description: The machine has automatic height detection for the pass-through. It has 2 sanding discs at the top and 2 sanding discs at the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal sander for scantlings and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, Q-Sand guarantees maximum precision and uniformity. It is equipped with sanding discs, lamellar brushes, and a double disc for more effective material removal, which improves adhesion for subsequent treatments. Q-Sand can be installed in a line or, thanks to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. Hsdpsxyafkefx Aa Eeg ----- Price of the above machine on request! ----- (Technical data according to manufacturer - without guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: new, Year of construction: 2025, machine/vehicle number: K24I440119, fuel type: diesel, power: 88 kW (119.65 HP), motor manufacturer: Cummins 6BTA5.9-G5, General information Field of application: Construction Weights Empty weight: 1.840 kg Functional Generator capacity: 110 kVA CE mark: yes Other information Fuel consumption: 19.4 Liter per Hour at 75% Load Generator: Stamford UC274C Frequency: 50 Voltage: 400 Hsdpfjv Hk Dzjx Aa Eog Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 400 l Transport dimensions (LxWxH): 3,1x1,18x1,95 Production country: PT Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Requesting a EUR.1 Certificate is possible for this Generator. Warranty: 1 year for continuous use 2 years for standby use

Condition: good (used), Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: SMC, Valve manifold SX7000 / SY7000 -Solenoid valves: SY7120-5YOE-02F-Q 7 pieces -Individual components: see photos -Price/Fee: complete -Dimensions: 270/120/H90 mm Hjdjxx Nazopfx Aa Ejg -Weight: 1.7 kg

Condition: new, Year of construction: 2025, machine/vehicle number: B24I437515, fuel type: diesel, power: 88 kW (119.65 HP), motor manufacturer: Cummins 6BTA5.9-G5, General information Field of application: Construction Weights Empty weight: 1.410 kg Functional Generator capacity: 110 kVA CE mark: yes Other information Fuel consumption: 19.4 Liter per Hour at 75% Load Generator: Stamford UC274C Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 400 l Transport dimensions (LxWxH): 3,08x1,15x1,65 Production country: PT Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Requesting a EUR.1 Certificate is possible for this Generator. Hsdpfx Ajv Sib Noa Eog Warranty: 1 year for continuous use 2 years for standby use