Condition: new, Year of construction: 1984, saw blade diameter 400 mm capacity 90 degrees: round 135 mm capacity 90 degrees: square 130 mm 200 x 80 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 1,8 x 1,95 m Automatic circular saw with - Feed roller conveyor 1500 Cgsbu Usvu Hcvjr S Set - Roller conveyor with stop 1000mm

Condition: used, Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 352 NC EVO, Semi-automatic circular saw for sawing aluminum and light metal alloys, using carbide-tipped circular saw blades. Includes dust extraction and material handling (roller conveyors). Machine for miter cuts from 45° right to 45° left. The vertical alignment allows for sawing operations with the head tilted between 0° and 45° left. Csbu Uev T U Tger S Segt

Condition: good (used), Year of construction: 2000, Functionality: fully functional, center width: 1,000 mm, center height: 205 mm, spindle bore: 52 mm, swing diameter over top slide: 410 mm, spindle speed (max.): 2,000 rpm, type of input current: three-phase, overall weight: 1,150 kg, Horizontal lathe - in between centers: 1000mm - diameter above bed: 410mm - centerheight: 205mm - spindle bore: 52mm - spindle speed: 2000mm max. Machine equipped with: - selfcentering 3 jaw chuck - independant 4 jas Chuck - fix and steady rest - drill chuck - lubrication unit Cgebsuyynaou Ur S Sjt

Condition: used, Year of construction: 1988, roll diameter 420 mm throat 410 mm workpiece height 295 mm cutting speed 12 - 375 m/min table surface area 600 x 600 mm saw band length 3150-3260 // 3-16 mm work height max. 1020 mm voltage 380 V total power requirement 1.1 / 1.7 kW weight of the machine ca. 620 kg dimensions of the machine ca. 1000 x 800 x 1900 mm from a maintenance workshop - good condition (!!) Furnishing: - Butt welder IDEAL BSO / 16 with scissors and whetstone Cgobu Ur Ssvdwv Eo Sot - 4 gear stages + 2 engine speeds - Belt guide height adjustment with handwheel - Working table tiltable +/-45° - Working table tiltable 10° - Machine base * Machinevideo : ?v=UVpE_bLGHa0

Condition: refurbished (used), Fully automatic circular saw machine Kaltenach KKS 400NA Machine has had a major service where several parts have been replaced. Cgsbu Ur Sjtqnimj Sjt Price on request. TM-Tools B.V. is the Kaltenbach overhaul specialist in the Benelux. More information can be requested via email.

Condition: used, Used Forte horizontal band saw More information to follow. Cgobujv E Ihnj Ur S Sjt

Condition: used, Year of construction: 1975, roll diameter 440 mm Cebu Ur Sevu Hb Eo Segt throat 420 mm workpiece height 200 mm cutting speed 20 - 1550 m/min table surface area 560 x 560 mm band length 3250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,2 x 0,8 x 2,1 m Bandsaw with - Saw blade welding unit - Grinding stone - Saw bands - documentation

Condition: good (used), Year of construction: 2013, Functionality: fully functional, Cutting range 90° round 660 mm Cutting range 90° flat 820 x 660 mm Cutting range 90° square 660 x 560 mm Shortest cutting length 6 mm Smallest diameter to be sawn 30 x 30 mm Shortest remaining piece length in single cut 70 mm Cgobu Ur Sovrh Rvj Set Shortest remaining piece length in automatic mode 90 mm Total connected load 12 kW Saw motor frequency-controlled 7.5 kW Single feed length 750 mm Cutting speed continuously variable 13 – 110 m/min Saw blade dimensions 8,670 x 54 x 1.6 mm Cutting feed hydraulic, continuously variable Material feed ball screw Material tension hydraulic Saw blade tension hydraulic

Condition: excellent (used), The Maco BSS 360 AR fully automatic bandsaw features programmable angular rotation. This enables fully automatic cutting of pipes and profiles to the right length and miter angle. To minimize vibration during sawing, the saw frame is made of cast iron. The Maco BSS 360 AR can be operated in both semi-automatic and fully automatic modes. The machine is equipped with a 5″ touch screen for operation. The machine can be programmed via this screen and diagnostic data can be read. In the control, 200 programs can be stored, with the option of entering length, off-cut length, number of pieces, angles and off-cut corners in each program. Mitre sawing is possible from 60° left to 45° right. Cgebuotvwxfs Ur S Sst Material clamp automatically moves according to the mitre angle to be cut. The feed clamp has a stroke of 860 mm. The program itself calculates the number of feed unit strokes required to reach the defined length.

Condition: used, Year of construction: 2007, Bomar Sawing machine type AL 600 Cobjvmf Easu Ur S Segt

Condition: used, Year of construction: 2007, cutting diameter 260 mm saw band length 3660 x 34 x 1,1 mm capacity 90 degrees: flat 280 x 260 mm vice 280 mm turning speed range: 20 - 120 m/min work height max. 660 mm voltage 400 V total power requirement 3.75 kW weight of the machine ca. 1700 kg. dimensions of the machine ca. 2000 x 1520 x 1240 mm New price ~ 18.000 euros very few operating hours (!) Furnishing: - column guided band saw - fully automatic - Fully automatic vise system - Feed unit ensures accurate positioning of the material * Feed length - single stroke : 400 mm - hydraulic vise clamping - hydraulic saw blade tensioning - 34 mm wide band saw blade. - Infinitely variable speed adjustment of the saw band - automatic chip conveyor - Spare bandsaw blades Cgsbuevb Ix Ej Ur S Sjt

Condition: used, Year of construction: 1980, Forte UF 20 Year of manufacture: 1980 Technical details: x-travel: 950 mm y-travel: 255 mm z-travel: 250 mm Spindle mount ISO: 40 / MK 4 Speed range: 45 - 2000 / 12 step rpm Headstock swivels +/-: 90° vertical = 90° right/left ° Headstock swivels +/-: 45° vertical = 90° right/left ° Feed:: (table) Table feed: X/Y: 16 - 132 mm/min Feed:: (table) Table feed: Z: 8 - 66 mm/min Clamping table: 1200 x 300 mm Total power requirement: 5.4 kW Machine dimensions approx.: 1.6 x 2.0 x 2.0 m Cgjbu Ursv E H Tij S Sjt The spindle head can be swiveled out.

Condition: used, Year of construction: 2001, saw band length: 4,715 mm, - Cutting capacity min. 30mm / max. 430mm - Cutting length min. 5mm - 9999mm - Remaining piece length: 15mm - Saw band motor: 7.5 kW Cgebujv Exvvo Ur S Sot - Saw band speed: 15-150 m/min (infinitely variable) - Saw band length: 4715 x 41 x 1.3mm - Suitable for use with hard metal saw bands - With change table for material feed - Chip conveyor KNOLL - 2m roller conveyor discharge side - Weight approx. 4000 kg (machine) / approx. 2600 kg change table

Condition: new, MEP SHARK 382-1 SXI EVO metal band saw Hydraulic semi-automatic. MEP dealer - please send us your inquiry motor power 1,5 / 1,8 kW Bench opening 385 mm belt dimensions 3770 x 27 x 0,9 mm weight 695 kg Speed 40/80 m/min. cutting area 0° 300 / 250x250 / 380x250 Cjbu Ueg Hzxior S Sogt cutting area 45° right 260 / 250x250 / 300x200 Cutting area 45° left 240 / 210x210 / 280x160 Cutting area 60° right 180 / 170x170 / 200x170 Cutting area 60° left Description Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical posts. 420 mm rotary table on roller bearing with preloaded thrust bearing and interchangeable steel inserts. Double belt speed (40/80 m/min.).

Condition: used, Year of construction: 1999, cutting width 150 mm Cebu Ur Sova Nqgs Sjgt machine weight ab. 300 kg 27468

Condition: used, Year of construction: 1999, gebraucht 1999 6173 Deutschland 11900 € 1 10700 € 500 mm 2800 U/Min Rund 180 mm, Quadratprofi Rund 120 mm, Quadratprofi 1100 mm 1450 mm 1350 mm 490 kg hydropneumatic saw feed new HM saw blade Cgobueuhdq Se Ur S Set pneumatic material clamping device vertical automatically opening protective cover Discharge roller conveyor with stop and measuring system, display E 110, 1/10mm, 4.5 m long, plastic rollers b = 250 x Ø 50mm, pneum. clamping, handwheel drive and locking in the operator area, stop can be folded up user manual in GERMAN COMPLY WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO & UVV)

Condition: ready for operation (used), Year of construction: 1990, Functionality: fully functional, Metal bandsaw BS230 from Berg&Schmid, fully functional. Year of manufacture not exactly known approx. 1990. Saw is in first ownership and is still in use. Drive makes slight noises and is in need of overhaul. Cgobu Ur Sjuk A N Hs Sjt

Condition: excellent (used), Fully hydraulic high-performance band saw in the heaviest design, with horizontally parallel movable saw blade, for cutting profiles, pipes and solid material in all qualities, including extremely difficult to machine material (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw blades. Saw unit in a fully solid design made of polymer concrete, this ensures the highest level of smoothness and service life of the saw blades. The saw unit is guided via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned hard metal saw blade guides. The material is tensioned via two hydraulic vices. The control system offers simple machine operation. The length can be set using a counter with 0.1 mm resolution. The quantity is set using a quantity counter, which switches the machine off when the quantity is reached. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. KASTO - fully hydraulic horizontal band saw HBA 420 AU CNC (420 mm x 420 mm / Ø 420 mm) Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel movable saw band, for cutting profiles, pipes and solid material in all qualities, including extremely difficult-to-machine materials (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw bands. The saw unit is made of solid polymer concrete, which ensures the highest level of smoothness and service life of the saw bands. The saw unit is guided by two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically pre-tensioned hard metal saw band guides. Material tensioning is carried out via two horizontal frame clamps. Material feed via a non-driven roller conveyor integrated into the machine with twelve transport rollers, which makes it easy to transport short leftover pieces. Cutting area round 420 mm Cutting area square 420x420 mm Cgsbjvzlgasu Ur S Sot Material feed with automatic 600 mm Multiple material feed 9999 mm Cutting speed continuously variable 20-130 m/min Total drive power 8 kW Drive power of saw motor 5.5 kW Clamping pressure reduction continuously variable Material support height 700 mm Saw band dimensions 6300x41x1.3 mm Shortest cutting length with automatic operation 6 mm Remaining piece length with automatic operation 100 mm Voltage 400V/50 Hz Dimensions LxWxH 3050x2420x2130 mm Weight 2920 kg. Year of manufacture 1995 Accessories: Chip conveyor, coolant system Special accessories: Driven machine roller conveyor CNC control Frequency-controlled drive Material end via Light barrier Cutting speed and feed controlled

Condition: new, Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°) Basic equipment: - Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre) - band tension indicator - hydraulic control of the cast iron saw arm - hydraulic clamping of the workpiece via short stroke cylinder - Height limitation of the saw frame by means of potentiometer from the control panel - hydraulic cutting pressure regulation (solid material - pipe) - Lowering of the saw arm via hydraulic cylinder; stepless adjustment - Lifting of the saw arm manually after the cut - easy manual shifting of the vice R/L - electrical band tension control with saw band breakage control - coolant pump with double feed to the saw band guides - carbide saw band guides and guide rollers - Bi - metal saw band M 42 - chip brush Technical Data ● Cutting range: round flat square 90° 278 340 x 275 275 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 Drive power: 1.5KW//400V//50 Hz Belt speed: 20-120 m/min infinitely variable Saw band dimension: 3125 x 27 x 0.9 mm Remaining piece length: 20 mm Cebu Ur Sjd Dpz Se Sogt Smallest ø: 5 mm Material support height: 775 mm Dimension: 1700 x 1500 x 2100 mm Weight: 410 kg

Condition: new, With the model ZIMMER Z125/R we offer a small and handy metal band saw for professional use: Infinitely variable speed regulation Saw arm swivels up to 60° to the right Band guide with 8 ball bearings Very smooth running Weight 19kg Inclusive 1 saw band (1.440 x 13 x 0,65) Cgebueg Im Syj Ur S Set Technical data: Motor power 230V / 1,0kW Cutting speed 30 - 80 m/min. Saw band dimensions 1.440 x 13 x 0,65 mm weight 19 kg Order number Z125/R Cutting data Round material Square Rectangle 0° 125 80 80 mm 45° right 125 x 125 80 x 80 50 x 50 mm 60° right 130 x 125 80 x 80 80 x 80 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 8680 € 179.68 € Schwenkrahmen 3120x27x0,9 mm 35/70 m/min 280 mm 240 mm 370x140 mm rund 225 mm, quadrat 215 rund 140 mm, quadrat 140 830 mm 1550 mm 1400 mm 1900 mm 353 kg Csbu Ureuhdwxe S Sogt manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: excellent (used), Functionality: fully functional, saw band length: 4,115 mm, saw band width: 41 mm, total height: 41 mm, We thank you for your inquiry for a KASTO band saw SSB 260 A 2 CC Fully hydraulic high-performance band saw in the heaviest design, with horizontally parallel movable saw blade, for cutting profiles, pipes and solid material in all qualities, including extremely difficult to machine material (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw blades. Saw unit in a fully solid design made of polymer concrete, this ensures the highest level of smoothness and service life of the saw blades. The saw unit is guided via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned hard metal saw blade guides. The material is tensioned using two hydraulic clamps. The control system allows for easy machine operation. The length can be entered on the handwheel with a resolution of 0.1 mm. The quantity setting is carried out via a control which switches off the machine when the quantity is reached. The material is fed via a feed cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. SSB A 2 CC 260 mm x 260 mm Ø 260 mm) Technical data: KASTO band saws Automatic band saws Machine type SSB 260 VA Technical data 2 column-guided Year of manufacture 2006 Cutting range 260x260 mm Drive power of saw gear. 4 KW Drive power of auxiliary units 6.5 KW Cutting speed 15-125 m/min Saw feed hydraulic infinitely variable Saw band dimensions 4115x41x1.1 mm Feed length 600 mm Max. with multiple feed 9999 mm Material support. 850 mm Dimensions of the machine Length/width 1690x1900 mm Height 2030 mm Weight of the machine 2100 kg Accessories Chip conveyor, coolant device CNC control Cebevzlf Nsu Ur S Sjgt Flushing device Side guide rollers Prepared for Bundle clamping device Standstill monitoring Coolant monitoring Feed roller conveyor 3,500 mm long, with 11 transport rollers, driven by handwheel, 70 mm Ø, 260 mm usable roller width, roller axis distance 5 x 238.1 mm and 5 x 428.6 mm, 6 side guide rollers 260 mm high, load capacity 2,000 kg/m Delivery time: by arrangement Delivery service: ex works Payment: upon collection The machines have been checked for functionality and repaired. Errors in the information and subject to prior sale reserved. Thank you for your inquiry. If you have any further questions, we will be happy to help you. If you need a different cutting area, please let us know as we have other machines in stock. We retain title until all of our claims have been paid in full. Kind regards Michael Maurath

Condition: new, Manual metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°) Cgjbu Ur Sjd Dpz Aj Sot Basic equipment: - Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre) - band tension indicator - hydraulic control of the cast iron saw arm - hydraulic clamping of the workpiece via short stroke cylinder - Height limitation of the saw frame by means of potentiometer from the control panel - hydraulic cutting pressure regulation (solid material - pipe) - Lowering of the saw arm via hydraulic cylinder; stepless adjustment - Lifting of the saw arm manually after the cut - easy manual shifting of the vice R/L - electrical band tension control with saw band breakage control - coolant pump with double feed to the saw band guides - carbide saw band guides and guide rollers - Bi - metal saw band M 42 - chip brush Technical Data ● Cutting range: round flat square 90° round 278 mm / flat 340 x 275 mm / quadr. 275 mm 45° R round 260 mm / flat 320 x 255 mm / squared 230 mm 30° R round 155 mm / flat 145 x 115 mm / squared 115 mm 45° L round 205 mm / flat 275 x 180 mm / squared 180 mm Drive power: 1.5KW//400V//50 Hz Belt speed: 20-120 m/min infinitely variable Saw band dimension: 3125 x 27 x 0.9 mm Remaining piece length: 20 mm Smallest ø: 5 mm Material support height: 775 mm Dimension

Condition: reconditioned (used), Year of construction: 1991, Functionality: fully functional, saw band length: 4,115 mm, saw band width: 41 mm, total height: 20,000 mm, total length: 20,000 mm, total width: 20,000 mm, power: 0.004 kW (0.01 HP), Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel moving band saw blade, for cutting profiles, pipes and solid material solid material in all qualities, including materials that are extremely difficult to cut (e.g. titanium, Inconel, Hastelloy) Suitable for the use of bi-metal and carbide saw bands. Saw unit made of solid polymer concrete, This ensures maximum running smoothness and service life of the saw bands. The saw unit is guided by a vertical and a round column guide. (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned carbide saw band guides. The material is clamped using two hydraulic clamping vices. The condition of the machine offers simple machine operation. The length can be set on the handwheel with a resolution of 0.1 mm. The number of pieces is set via a piece counter and the machine is switched off when the number of pieces is reached. The material is fed via a feed cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. SSB 260 VA 260 mm x 260 mm Ø 260 mm) Technical data: Bandsaws KASTO Automatic band saws Machine type SSB 260 VA Technical data 2 column guided Year of construction 1991 Cutting area 260x260 mm Drive power saw gear. 4 KW Drive power auxiliary units 6.5 KW Cutting speed 15-125 m/min Saw feed hydraulics infinitely variable Saw blade dimensions 4115x41x1.1 mm Feed length 600 mm Max. with multiple feed 5400 mm Material support 850 mm Machine dimensions Length/width 1690x1900 mm Height 2030 mm Weight of the machine 2100 kg Accessories Chip conveyor Coolant device Multiple feed Side guide rollers Machine roller conveyor Adjustable side guide rollers Prepared for bundle tensioning device Multiple feed counter Cgobusrnkruj Ur S Sot Hydraulic hold-down device

Condition: new, The machine individual 520.360 DGH is a semi-automatic double mitre band saw in two-column design. The mitre range of the saw extends from 30° left continuously to 30° right. The model individual 520.360 DGH has a hydraulic full stroke vice and an easy to use control in plain text display. Standard equipment details Cebu Ur Sjdyn H Tj Ssgt - Double mitre 30° - 45° - 90° - 45° - 30° - Hydraulic full stroke vice - Saw frame mounted on preloaded linear guides - Infinitely variable saw band speed - Infinitely adjustable saw feed and cutting pressure - Automatic cutting pressure regulation - Precision carbide saw band guides - Powerful drive motor with 3,0 kW - Modern control with plain text display and membrane keyboard - Freely positionable control panel - Large dimensioned hydraulic unit - Machine designed according to current CE standards and safety guidelines inclusive: Minimum quantity lubrication digital mitre gauge frame height adjustment at the control panel price on request