Used sand blasting equipment for sale (157)

Condition: excellent (used), functionality: fully functional, overall weight: 1,100 kg, workpiece width (max.): 230 mm, workpiece height (max.): 320 mm, No minimum price – guaranteed sale to the highest bidder! The system was only used for demonstration and testing purposes and is therefore in very good condition. TECHNICAL DETAILS Gedpfx Amjzh Nggjzsbp Number of satellites (workpiece holders): 6 Number of spray nozzles: 6 Maximum workpiece height: 320 mm Maximum workpiece width: 230 mm Movement: Rotational movement of the satellites, horizontal up/down movement Settings: Adjustment of the number of strokes, speed, and height of the lifting movement MACHINE DETAILS Control system: PLC Siemens Total weight: 1,100 kg EQUIPMENT Light curtain

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,288 h, functionality: fully functional, machine/vehicle number: 936, workpiece weight (max.): 150 kg, power: 8 kW (10.88 HP), workpiece length (max.): 800 mm, workpiece width (max.): 600 mm, number of support arms: 16, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with an optional support system and can therefore accommodate one large workpiece or a maximum of 16 smaller workpieces on the supports. TECHNICAL DETAILS Turbine power: 8 kW Workpiece size (single workpiece) max.: 800 x 600 mm Workpiece weight (single workpiece) max.: approx. 100 kg Number of positions in the support system: 16 Workpiece size (on support system) max.: 200 x 200 mm Workpiece weight (on support system) total max.: 150 kg Filter data Number of filter cartridges: 2 Total filter area: 20 m² Filter area per filter cartridge: 10 m² Air velocity: 1.25 m/min Compressed air data Compressed air pressure: max. 4–5 bar Compressed air consumption: approx. 7 m³/h Compressed air connection: G 1″ Permissible negative pressure: max. 1,500 Pa Dust container: 20 l Residual dust content in the exhaust air: below 5 mg/m³ MACHINE DETAILS Control unit: Pulse/time: 24 V, 1 phase, 50 Hz Solenoid valves: Voltage: 24 V, 50 Hz Timer: Input/output voltage: 24 V, 50 Hz Operating hours: 2,288 h Fan data Air flow: 2,000 m³/h Static pressure: 1,800 Pa Total pressure: 2,000 Pa Gbedozh Nf Aepfx Amzop Power consumption: 2.2 kW Motor power: 1.1 kW Motor voltage: 400 V Motor frequency: 50 Hz Motor phases: 3 phases EQUIPMENT Filter cartridges with 10 m² filter area each Aluminum venturi tubes Solenoid valves, type CA 25 DD Timer CG 03.06/04 Filter group Pressure regulator Pressure gauge 1″ ball valve Dust container, 20 l Fan

Condition: new, Year of construction: 2026, Oversized doors for loading and unloading. 2 exhaust openings (1 exhaust connection ø 92 mm and 1 exhaust nozzle ø 64 mm) for connecting a dust extraction system. Sandblasting cabinets for clean blasting operations without contaminating the work environment. Suitable for various blasting materials, e.g. quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g. engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. Optimal visibility and work protection during workpiece processing thanks to the viewing window with an applied protective film. Dust-free operation due to all-round seals on the lid and door frame. Sturdy shelf grid allows placing workpieces inside the cabinet. With a discharge opening for changing the blasting material. Gjdpfx Ascqm Sbjmzebp Suction pipe for the blasting material is attached to the bottom of the collection container. With compressed air connection on the outside. Stable due to rubber feet. Scope of delivery: High-quality blasting gun with ceramic nozzle 4 ceramic nozzles (4/5/6/7 mm) 12-volt fluorescent tube with 230-volt power supply and external switch Incl. 5 replacement films for the viewing window Two large, integrated latex work gloves Model: SSK 2 Article No.: 6204001 Technical Data Volume of the work chamber: 220 l Air consumption: 200 - 500 l/min Working pressure: 2.8 - 8 bar Compressed air connection: 3/8" Abrasive grain size: 0.42 - 0.125 mm Internal dimensions: 840 x 550 x 360 mm External dimensions: 950 x 660 x 1380 mm Weight: 55 kg Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Condition: excellent (used), Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. Gedpfx Amjwaiv Uezsbp -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg

Condition: used, Year of construction: 2005, Sandblasting machine, blasting machine, sandblasting cabin, sandblasting device Gbsdpforyak Tox Amzsp -Manufacturer: Güde, blasting system sandblasting cabin type P1 -Interior: 580/480/H295/350 mm -Air requirement: 150 l/min / pressure 6 bar -Dimensions: 690/480/H490 mm -Total weight: 38 kg

Condition: good (used), Feed container for blasting system, sandblasting system, blasting system, sandblasting cabinet, rotary basket system, wire belt, overhead conveyor and roller conveyor blasting system, free blasting system -Handover: in its current condition as inspected -System: Individual components see photos -Feed container: Type Exactomat 2 G - 60 -Vacuum pump flow rate: 26.2 m³/h Gsdpfxoqcyzwe Amzobp -Dimensions: 830/580/H1730 mm -Weight: 296 kg

Condition: excellent (used), Year of construction: 1990, Description to follow! Gedpfx Amjxzk Ilezobp

Condition: excellent (used), Here, we offer a used Datona mobile sandblasting unit. Datona Mobile Sandblasting Unit DUO - 74 Liter SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a large reach Easy switching between blasting media thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting unit is used for removing paint and rust. Thanks to the two tanks, you can choose between two different blasting media. The mobile sandblasting unit operates with a pressure of 4 to 8 bar and requires a compressor with an intake capacity of at least 350 l/min. Double tank: If blasting with soda or calcium carbonate does not produce the desired result, simply try a different blasting medium. For a more effective result, it is also possible to use both blasting media simultaneously. Gbedpfxozgcbnj Amzjp With the sandblasting unit, you bring a practical machine into your home. With the help of the special mixing valve, you can easily and gently remove paint from steel, stainless steel, chrome, aluminum, or polyester using soda. A major advantage of blasting with fine soda is that the surface of the object being blasted is not damaged. You don't even have to remove rubber seals, chrome parts, or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop and on-site. Note: One tank is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter tank capacity ✓ Air consumption is approximately 350 l/min Technical data: SKU DT-55212 Weight 33 kg Suitable blasting media Aluminum silicate Dato-Blast calcium carbonate Soda Connection for blasting cabinet 1/4" Max. pressure 2 - 6 bar Minimum air consumption 350 l/min Min. tank capacity compressor 100 liters Type: DT-55212 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, internal diameter 25 mm external diameter 39 mm wall strength 7 mm length in total 33 m Gbedpozg Nmwsfx Amzop jet hose Unused, but shows significant signs of storage wear

Condition: used, Year of construction: 2007, functionality: fully functional, space requirement width: 2,300 mm, space requirement length: 3,500 mm, space requirement height: 4,200 mm, conveyor belt width: 850 mm, -WAG 916- We are offering a small shot blasting machine from the manufacturer Wheelabrator. Gbsdjzkub Uopfx Amzjp The shot blasting machine, type MB-100, is fully functional. Space required (length): approx. 3500 mm Space required (width): approx. 2300 mm Space required (height): approx. 4200 mm Conveyor belt width: 850 mm The shot blasting machine has been completely disassembled and cannot be tested while powered.

Condition: excellent (used), Year of construction: 2018, operating hours: 12,714 h, functionality: fully functional, For sale is a wire belt blasting system from the renowned manufacturer Rösler, model RDGE 1000-4 HD. The system is in perfect condition and fully functional. A viewing under power is possible at any time after prior arrangement by telephone. If you are interested or have any further questions, please do not hesitate to contact us. Gbjdpfovmwrljx Amzsp

Condition: new, Year of construction: 2025, power: 5 kW (6.80 HP), SAPI Premium 200-liter pressure blast machine with cyclone cleaner and abrasive vacuum for abrasive treatment. This blasting system provides a cost-effective, highly economical, and effective solution for open blasting work with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of many different types of workpieces using a blaster with abrasive treatment. The abrasive is collected by hand after blasting and pushed into the collection hopper on the floor. The abrasive vacuum extracts the abrasive from the hopper and pulls it through the cyclone cleaner. The dust is extracted and collected in the dust container of the vacuum. Coarse particles are separated by a sieve. The cleaned abrasive falls back into the vented pressure blast pot and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control allows you to start and stop the blast pot using a hand lever mounted on the blast hose package. This is a highly economical and effective solution for open blasting operations with semi-automatic abrasive recycling. The scope of delivery includes: SAPI Premium 200-liter blast pot with 1 1/4" piping, pressure-regulated from 0.1 - 12 bar, max. operating pressure 12 bar High-performance 1 1/4" water separator, permanently installed on the unit Gsdpfxjwc Rcns Amzsbp SAPI safety shut-off device Cyclone cleaner for abrasive preparation with lifting device Abrasive sieve (inserted sieve in the blast pot hopper) Filling hopper 500x500x380 mm 4-meter connecting hose from the filling hopper to the cyclone cleaner 3-meter connecting hose from the cyclone cleaner to the abrasive vacuum cleaner Abrasive vacuum cleaner 5.5 kW, 400 V, 50 Hz with 70-liter dust container 10-meter blast hose package 25x7 mm, fully assembled with nozzle holder, hand lever, control line, and blast hose coupling Boron carbide Venturi long nozzle (diameter optionally 6 mm) mm, 8 mm or 10 mm)

Condition: new, ROBOBlast: Automated Precision Sandblasting Experience the power of ROBOBlast, our state-of-the-art robotic sandblasting system designed for precise, efficient, and consistent surface preparation. Perfect for industrial applications requiring high performance with minimal human intervention. Gbsdpfx Amowf Dr Uszsp ROBOBlast: Robotic Sandblasting Solutions The ROBOBlast system offers a highly efficient and precise robotic sandblasting solution tailored to the needs of modern industry. Engineered for performance, it automates surface preparation, ensuring consistent results with minimal human intervention. This system is the ideal choice for companies looking to optimize their surface treatment processes. Precise and Efficient Surface Preparation ROBOBlast delivers consistent sandblasting performance on a variety of surface types and materials. Automation enables greater accuracy and consistency, eliminating the variability that can accompany manual operations. Whether for small or large projects, ROBOBlast ensures high-quality surface preparation every time.

Condition: new, Year of construction: 2025, pressure: 12 bar, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup but also protects the operator and those around them from the harmful effects of airborne particles. Gbjdpfx Ameupzn Eezsp With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. And thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. ✅ PR 50 Dust-free Sandblaster With its versatile application capabilities, the PR 50 can handle a wide variety of surfaces, from hard metal to delicate glass. Our PR 50 is an excellent choice for those working in the automotive, construction, or cleaning industries, to name a few. Its compact size and handy design make it easy to operate and transport, even for those new to sandblasting.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. Gedpewc Ri Iefx Amzobp The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness Gbsdpfx Amjupyw Ejzsp The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, total width: 2,438 mm, total height: 2,896 mm, total length: 6,058 mm, overall weight: 3,300 kg, workpiece weight (max.): 5,000 kg, filter area: 40 m², tank capacity: 200 l, Equipment: lighting, We offer an absolute innovation! A high-quality high-cube container for both indoor and outdoor use. This container is made of durable Corten steel, ensuring a lifespan of at least 30 years. It is fully sealed, windproof, and waterproof. What’s included? ✔ Premium 200 pressure blasting unit with manual abrasive recycling, capable of processing and reusing all common reusable abrasives. ✔ Integrated filtration system inside the container (including impact pre-separator, connecting elements, etc.). ✔ Pre-installed electrical system and LED lighting for immediate use. Robust, safe, and ready for versatile applications! Gbodouiwu Hepfx Amzep This unit is immediately operational and designed for various industrial uses. Transport Available Transport can be arranged upon request, with pricing based on daily rates. If you are interested or have any questions, feel free to contact me! For detailed information or a quote, please do not hesitate to reach out to me directly. I am happy to assist you! We also offer rent-to-own and leasing options for this sandblasting container. For inquiries or a price quote, please contact Mr. Andreas Wallner at any time.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SAPI Jumbo, pressure: 12 bar, total width: 3,087 mm, total height: 2,078 mm, total length: 3,692 mm, overall weight: 3,000 kg, inner dimension width: 2,340 mm, inner dimension length: 3,520 mm, inner dimension height: 2,500 mm, workpiece weight (max.): 500 kg, filter area: 20 m², Equipment: lighting, Efficient and Ready-to-Use JUMBO Blasting Cabin Gsdsukdfpspfx Amzobp This fully assembled, walk-in JUMBO blasting cabin provides a comprehensive solution for efficient blasting operations. Equipped with two LED blasting lights, it ensures optimal illumination of the workspace. The double-wing door allows easy access and handling of larger workpieces, while the blast-resistant rubber lining on the walls protects the interior from wear and extends the cabin’s lifespan. For air filtration and dust reduction, the cabin features a high-performance cartridge filter and an impact separator, ensuring a clean working environment. The flat conveyor system in the floor, covered with a grated surface, enables the automatic return transport of the blasting media, while the electric drive unit for the conveyor system guarantees smooth operation. Additionally, the cabin is equipped with a bucket elevator and a high-performance abrasive recycling unit, allowing for efficient processing and reuse of blasting media. The 38-liter pressure blasting pot provides sufficient capacity for extended blasting cycles. The package also includes a 10-meter-long blasting hose and a durable boron carbide nozzle, ensuring optimal blasting performance. Ideal for Professional Blasting Operations This blasting cabin is the perfect solution for businesses that require a reliable and efficient system for blasting work. ✔ Custom features, such as loading trolleys, are also available upon request. ✔ Compressed air, electrical supply, and installation must be provided on-site. If you are interested or have any questions, feel free to contact us at any time!

Condition: new, Year of construction: 2025, INJECTOR Sandblasting Cabinets The Benefits and Applications of Injector Sandblasting Cabinets Gsdpewf Dwwjfx Amzebp Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive media into the airstream. The abrasive media is then propelled at high velocity from the blast nozzle, where it impacts the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. Our SAPI injector sandblasting cabinets—including the Elk, Ram, and Buffalo models—use an air-driven vacuum system that draws the media to the front of the nozzle, where it meets the airstream and then "shoots" the mixture onto the workpiece. These cabinets are ideal for lighter applications and offer efficient and cost-effective solutions. ----- The Widder 70/100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a large work surface, a right-hand side door, and an efficient dust control system, this cabinet is designed for use with various types of abrasives and can accommodate small to medium-sized parts. It is ideal for industrial applications such as metal fabrication shops and workshops. ----- The Elch 100/130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows for easy monitoring of the blasting process and ensures a clean and safe working environment. The Elch is designed for use with a wide variety of abrasives. Its user-friendly design and efficient blasting process make it an ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- The Büffel 140/180 injector sandblasting cabinet is a robust blasting machine designed for demanding applications. It features an air-driven venturi system that draws abrasive into the airstream and expels it at high speed from the blast nozzle. The Büffel cabinet is also available with an integrated filtration system that helps reduce dust and improve air quality during the sandblasting process. Loading heavy parts is also easily possible thanks to the front door using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. Gbodpfxoupzmus Amzop A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: new, Basic TWO Blasting Container – A New Standard in Sandblasting Introducing the SAPI Basic TWO Blasting Container—a true milestone in the sandblasting industry, designed with dual-container space to maximize functionality and efficiency. With its spacious layout and innovative features, this advanced sandblasting solution is perfect for professionals who need more room for their work without compromising on quality and performance. The Ideal Solution for Maximum Efficiency For companies seeking a comprehensive, practical, and high-quality sandblasting solution, the SAPI Basic TWO Blasting Container is the perfect choice. With its exceptional features and thoughtful design, it raises productivity and quality to a new level in the sandblasting industry. More Than Just a Container – A Complete Professional Solution The SAPI Basic TWO Blasting Container offers the perfect balance of space, functionality, and cutting-edge technology. Thanks to its innovative design and premium features, it is not just a simple container—it’s a fully operational solution that takes sandblasting to the next level of efficiency, effectiveness, and safety. Whether for large-scale projects with demanding requirements or precise detail work, this system provides the space, tools, and technology needed to complete the job efficiently, safely, and professionally. Key Features ✔ Spacious Blasting Area & Technical Room – The dual-container design provides ample workspace for sandblasting while ensuring a separate technical room for optimized workflow and easy equipment access. ✔ Plug-and-Play Convenience – The SAPI Basic TWO Blasting Container is designed for ease of use, requiring minimal setup so you can start blasting immediately. ✔ Enhanced Air Quality – Equipped with the SAPI Air Filter, the container ensures a cleaner and healthier work environment by effectively controlling dust and airborne particles. ✔ Dual Cleaning Modes with 5kW Abrasive Vacuum Turbo Cleaner – Efficient handling of abrasive recovery and cleaning with two modes for maximum flexibility and control during operation. ✔ Durable, Rubber-Coated Walls – The interior walls are lined with heavy-duty rubber, ensuring resistance to intensive sandblasting operations while extending the lifespan of the workspace. ✔ Bright & Well-Lit Work Areas – Three high-powered LED lights are strategically placed to provide optimal visibility, ensuring precision and safety during sandblasting. ✔ Robust Premium 200-Liter Sandblasting System with Cyclone Cleaning – The powerful 200-liter system enables efficient and continuous blasting, while the integrated cyclone cleaning system improves abrasive quality, reduces waste, and boosts productivity. Blasting Room Dimensions ✔ Depth: 4.40 m Gjdpfxsupzt Uj Amzjbp ✔ Total Width: 2.25 m ✔ Total Height: 2.65 m

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. Gbodpfx Amjwc Nrnozjp The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: new, Year of construction: 2025, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup work, but also protects the operator and those around them from the harmful effects of airborne particles. Gbodpjwc Rg Hsfx Amzop With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. Thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. ✅ DINO II & DINO MASTER Available in 60 and 100 liter versions The SAPI pressure-return sandblaster "DINO" is a compact and universally applicable device. It is characterized by its robust construction and mobility. The blasting performance depends on various factors such as surface condition, compressor capacity, type of blasting media, etc. The cleaning performance is 3 - 10 m² / hour. Overall, this device provides the worker with a clean working environment, low abrasive consumption (thanks to the suction unit), and lower waste disposal costs. The device is used in the steel, shipbuilding, and petroleum industries, as well as for maintenance work in the construction sector, by stonemasons, and others.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary Godpfxswc Rk Eo Amzsbp

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: Gbjdpfeun R N Asx Amzsp ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height