Used Automatic Punching Press for sale (44,764)

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under Klolhcdwevdt Spo Dsp power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: excellent (used), Year of construction: 2010, Schuler SERVO transfer press MSD2-630 Operating hours 28146 Stroke rate 3-60 1/min Slide adjustment 300 mm Stroke 80-400 mm ram area 4,000 x 1,700 mm Table surface 4,000 x 1,800 mm Schuler Transfer System Schuler conveyor system Klolhjv R Hfpscdw Dsp Belt width 80-1,300 mm Material thickness 0.5-3.0 mm

Condition: used, Year of construction: 1985, pressure 25 t Kolhcevu E I Dsdw Dslp no. of strokes 1500 Hub/min total power requirement 20 kW

Year of construction: 1980, Condition: used, control panel Boschert Stanze Year 1990 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Kjleh D Aqgohcdw Dolp Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Kjlhcdjgp T Euew Dolp Weight of the press 8500 kg Very good condition

Condition: good (used), Pressure: 25 t cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. ram stroke - max.: 20 mm Table surface usable: WxD: 440 x 360 mm Kolhefim Dwjcdw Dslp

Condition: used, Year of construction: 1992, machine/vehicle number: 9802, pressure:80 t no. of strokes:100 - 1000 Hub/min stroke:16-63 mm table surface area:970 x 920 mm hole in the table:740 x 100 mm ram surface:760 x 510 mm distance between table / ram:280 mm compressed air:6 - 10 bar :43 kw Kelhcdwjh Ra N Ro Dolp weight of the machine ca.:15,5 t dimensions of the machine ca.:232 x 125 x 326 m

Condition: excellent (used), Year of construction: 2017, Schuler SERVO transfer press MSD2-800 Operating hours 14097 Stroke rate 3-60 1/min Kljlhcov R Hd Sjdw Dep Ram adjustment 300 mm Stroke 80-360 / 400 mm ram area 4,000 x 1,700 mm Table surface 4,000 x 1,800 mm Schuler Transfer System Schuler feed Coil line Coiltech Strip width 120-1,300 mm Material thickness 0.6-5.0 mm Reel load capacity 10,000 kg

Condition: used, Year of construction: 1987, pressure 40 t Kslhcovu E Iwsdw Dslp no. of strokes 500 Hub/min total power requirement 5,5 kW

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l Klolhcju Icxqsdw Dsp stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Pressure: 30t Strokes per minute: 120-600 Stroke: 40mm Up table size: 250x500mm Klelhs Dvk Aecdw Djp Down table size: 600x600mm & 400x320mm Between Columns Technical characteristics: *AUTOFEED LENGTH 80mm, WIDTH 320mm *AIRCLUTCH Power: 7,5kw DIMENSIONS: Height: 2600mm Width: 1800mm Length: 1200mm Weight: 3800kgr New electric systems

Condition: good (used), table size: 350x350mm Klelhcdwjfm A Amo Dep

Condition: used, Year of construction: 1985, machine/vehicle number: 751, dimensions of the machine ca.:2,6 x 1,0 x 2,2 m pressure:40 t sheet width:150 mm stroke:8 - 70 mm number of strokes - stepless:60 - 300 min-1 ram surface:340 x 320 mm ram adjustment:70 mm table-size:550 x 580 mm Working width max.:210 mm column travel -side:250 mm hole in the table:400 x 90 mm clamping plate thickness:60 mm boring of tool-holders:Ø 40 x 80 mm Kslhocxxnmscdw Delp groove width:30 mm flute depth:6 mm distance between columns:560 mm weight of the machine ca.:3,8 t total power requirement:7,5 kW

Condition: used, Year of construction: 1980, pressure 25 t no. of strokes 1500 Hub/min Klelhcdwovu E Iqj Dsp total power requirement 20 kW

Condition: used, Year of construction: 1979, machine/vehicle number: 5255, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:540 x 450 mm Kjlhocxxu Njcdw Djlp Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm total power requirement:5,5 kW weight of the machine ca.:3 t dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Kljlhcdwjt Hwz Ne Djp Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm Klslhcdjcxxycew Dop table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: used, machine/vehicle number: 8483, pressure:30 t no. of strokes:100-600 Hub/min sheet width:115 mm table-size:450x450 mm Bruderer Double Roll Precision Feed:BBV 190/85 links stroke adjustable from - to:16-40 mm distance between columns (le-ri):330 mm :280 mm dayligth:290 mm inlet width:120 mm feed length:15-80 mm dimensions of switch cabinet:1,1 x 1,2 x 2,2 mm hole in the table:315 x 100 mm total power requirement:5,5 kW weight of the machine ca.:3 t high speed triple-column design, BRUDERER BBV 190-85 feeder on left side, cooler ventilation, swivelling safety gate, pneumatic clutch, manual roll vent. on feeder Kjlhcecxxrdodw Dolp

Condition: used, Year of construction: 1971, machine/vehicle number: 1967, pressure:30 t no. of strokes:100 - 600 Hub/min stroke adjustable from - to:8 - 40 mm ram adjustment:40 mm inlet width:198 mm mould height - Max./min.:230 - 270 mm roll surface width:110 mm Klslhcocxxxmsdw Dep hole in the table:310 x 80 mm distance between columns (le-ri):330 mm distance between columns (vo-hi):280 mm table height over floor:990 mm column diameter:50 mm voltage:380 V frequency:50/60 Hz control voltage:24 V table-size:475 x 450 mm ram diameter:190 mm total power requirement:0,96 - 5,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1,2 x 1,16 x 2,15 m

Condition: used, Year of construction: 1995, machine/vehicle number: 1830977, pressure:32 t no. of strokes:30 - 1100 Hub/min sheet width:0 - 120 mm table-size:760 x 580 mm feed::SANKYO V76 stroke adjustable from - to:3-50 mm distance between columns (le-ri):800 mm :200 dayligth:235 mm feed length:0 - 76,2 mm hole in the table:670 x 110 mm ram adjustment:50 mm surface area of ram:710 x 410 mm plate thickness:0 - 3 mm band speed:max. 70 m/min control:OP 15 SIEMENS SPS Feeding Angle:165 ° total power requirement:18 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,6 x 1,7 x 2,6 m Kjlhecxxrlecdw Djlp precision machine in 4-column design, Sanyo V76 precision cam feeder, feed direction right to left, with Siemens CNC control OP15, noise reduction cabin, Herion press security valve, central lubrication, emergency cut-off

Condition: used, Year of construction: 1988, machine/vehicle number: 724306, pressure:63 t no. of strokes:400 Hub/min sheet width:180 mm Klslhcdwscxxt Te Djp stroke:10 - 80 mm feed length:150 mm band width:180 mm control:KAISER voltage:380 V dimensions of the machine ca.:1,85 x 2,70 x 3,00 m double-column machine with double connecting rods with adjustable stroke, electric rpm control, electric tappet adjustment, pneumatic tappet compensation, Imco individual pressure force monitoring device (split right / left), Unidor tool monitoring system, blower device, original Kaiser gripper feeder type ZR 18D, emergency cut-off, electric 2-hand operation, free-standing control panel

Condition: good (used), Overall dimensions : 1190 x 500 x 1300 mm Electrical data : 400V; 2,7 A; 1,1 KW Kljljt H Ncrshcdw Dsp 100 strokes/min Weight : 240 kg

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, Model: Amada EMZ 3610 NT electric punch, 45 Station Turret with 4 Auto indexing units Year: 2006 Frame Construction: Bridge Type Press Capacity: 30 tonnes (196kN) Press Type: High speed AC servo direct twin drive Axis Traverse Distance: 1525 x 2500mm Workable Maximum Sheet Size with Auto Positioning: 1525 x 5000mm Max. Material Thickness: 4.5mm mild steel Max. Material Weight: 150Kg Max. Hole Diameter: 114.3mm No. of Stations: 45 Stations: 24 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 2 x C (Max. Dia. 50.8mm) 1 x D (Max. Dia. 88.9mm) 2 x E (Max Dia 114.3mm) Auto Indexing: 2 x B (Max Dia 31.7mm) 2 x C (Max. Dia. 50.8mm) Axis Speed X / Y: X 100m/min, Y80m/min Hits per Minute: 500 min (5mm stroke, 25.4mm pitch): 780 min (5mm stroke, 1.0mm pitch): 1800 min (1.4mm stroke, 0.5mm pitch) Turret Speed Bi-Directional: 330 RPM Punching Accuracy: +/ – 0.1mm Positioning Repeatability: +/ – 0.07mm Ram Stroke Length: 37mm Tool Lubrication: Air Blow System Axis Drives: AC Servo Motor Klslhcsv Schijdw Dep Electric Power Required: AC200V 3-Phase 5-/60Hz, 27kVA Air Pressure Required: 5.0 Kgf/cm² Machine Length 5423 mm Machine Width 5120 mm Machine Height 2318 mm Machine Weight 24,500 kg Standard Equipment: Safety Lightguards Model Of NC: AMNC Touch Screen Data Interface: Networkable

Condition: excellent (used), Year of construction: 2003, Amada EM2510NT electric punch, 45 Station Turret with 4 Auto indexing units Available March 2025 2003 Year of manufacture Country of Manufacture: Japan Construction Bridge Type 20 tonnes (196kN) High speed AC servo direct twin drive 1270 x 2500mm 1270 x 5000mm max sheet size with auto-repositioning 3.2mm mild steel, max material thickness 150Kg max sheet weight Kljlhcdwevnzflj Djp Max hole size 88.9 mm 45 Stations Turret Turret Stations: 24 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 2 x C (Max. Dia. 50.8mm) 1 x D (Max. Dia. 88.9mm) Auto Indexing Stations 2 x B (Max Dia 31.7mm) 2 x C (Max. Dia. 50.8mm) Combined x/y Axis speed128 m/min Turret Speed Bi-Directional 330 RPM Punching Accuracy / - 0.1mm Positioning Repeatability / - 0.07mm Ram Stroke Length 37mm Tool Lubrication Air Blow System Axis Drives AC Servo Motor Electric Power Required 22Kva 400V /- 10% 50Hz Air Pressure Required 5.0 Kgf/cm² Air Flow 250 L/min Machine Length 5526mm Machine Width 5120mm Machine Height 2318mm Machine Weight 18 tons Standard Equipment Safety Light guards Model Of NC: Data Interface: Amada AMNC-F (Fanuc 180i-PB)

Condition: ready for operation (used), controller manufacturer: Bosch, nominal power: 5.9 kW (8.02 HP), All tools indexing Full option machine!! Rotating tool adaptor Aut repositioning device with footpedal Programmable footpedal Auto toolchanger with 22 stations 3 plate clamps Programmable chute for parts 500 x 500 mm Container for workpieces Punch spray lubrification 2nd lubricant container Exhaust device Chip container Rapid shutdown of hydraulic system External control panel Graphic workshop programming Workshop programming SW package for PC Safety equipment RJ45 network connection Kolhcdwsv Sfpie Dslp options: - MultiTool - MultiShear - MultiBend - Deburring tool - Threadforming - Chipconveyor - Automatic closing of clamps - Part trap detection sensor Nice selection of tools inlcuded + punch tool grinder Punching pressure: 180 kN Max sheet thickness by punching + nibbling: 6,4 mm Max weight workpiece: 230 kg Working range on cross-side (X-axes): 3000 mm Working range along (Y-axes): 1600 mm Positioning speed along X-axes: 90 m/min Positioning speed along Y-axes: 60 m/min Toolchanger: 22 tools Changingtime: 0,3 / 3 sec