Condition: excellent (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, type of input current: AC, volume flow: 1,250 m³/h, pressure: 11 bar, operating temperature: 15 °C, air demand: 1,250 m³/h, we have a oxygen generator which can produce oxygen with 93% purity +-1%. It operates between 6-10 bar pressure and total air flow is 1140 Nm3/h. Details in the documents attached. We also have air compressors suitable for the oxygen generator. Ijdpfxjxhfidj Aacsbc

Condition: used, functionality: unexamined, High-pressure water pump, e.g., for - laboratory applications or - air humidification (cooling outdoor areas/patios) Pressure 100 bar Ibedpfswc Ubnjx Aacjc Voltage 230 V Speed 1400 rpm

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Isdpfoxmkc Tjx Aacjbc

Year of construction: 1991, condition: excellent (used), We can offer you CO2 carbon dioxide gas used storage tank vessel Volume 21050L; Working pressure 22 bar; Export from EU Ibodpfxsk Eac De Aacjc We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, Item: A-9600-GEA-APV-Evaporator Used Evaporator Price by GEA & APV (SPX) Capacity 7.000 L & 12.000 L Iedpfxevi Razj Aacjbc Dismantled, moved to stock

Condition: used, Used Kemutec KEK Model 120 CM stainless steel cone mill. Has a round blates beater direct top driven by LS Leroy Somer electric motor 0,75kW, 220-480V, 3ph/50Hz, 2840rpm. Motor is Atex rated: II 2G EExde II B T4. Rotor/blade has changeable speed via IMO Jaguar VFI. Potentiometer mounted on doors of main switchboard. (2) Cone screens type 0,85 and 1,0 associated with the machine. Cone screen top diameter 120 mm and bottom diamter 45 mm, cone height 80 mm. Mounted on stainless steel frame with wheels. Control panel included. Machine surface is balotinated. Overall dimensions: 1500 L x 850 W x 1100 mm H. Ibjdpfoxm T Hhjx Aacec

Condition: like new (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,081 kg, power: 75 kW (101.97 HP), volume flow: 1,500 m³/h, operating pressure: 13 bar, We have two Atlas Copco compressors and one oxygen generator type Oxymat ( Oxygen PSA. ) Hopefully the equipment will be sold together. Detailed description in documents attached. But we can say that the two compressors will have a capacity of 798 Nm3 each and the PSA can produce approx 250Nm3 oxygen per hour with purity of 93% +-1% Iodpfx Aexhdb Ssacjbc

Condition: excellent (used), Dissolver Stirrer Vollrath EWVWSV-7 EX Explosion-protected version Power 4.6 kW with stirring rod Speed range 300-1200 1/min Mobile, on wheels Ibodpfx Ajwiu Aroacjc Very good condition, directly from production!!!

Year of construction: 2019, condition: ready for operation (used), Volume flow: 4400m³-5280m³/h, max. differential pressure: 45bar/30bar, motor power consumption: 11.8kW/18.5kW, cooling water range: 180l-300l, lubricant quantity: 4.75l, machine dimensions X/Y/Z: approx. 1200mm/450mm/550mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Ijdpfxjxmkcyo Aacebc

Condition: used, Used Buss extruder PLK 100 for sale. The extruder was used in the powder coatings sector. The extruder is fully functional Ibodpfx Aajvfd Uqscec

Year of construction: 2024, condition: used, Exhibition machine return systemReturn system for edge banding machinesMax. part sizes: 2800 x 1300 mmMax. Part size for 4-sided edging: 1300 x 1300 mm (optional 2400 x 800 mm) Continuous feed from 7 - 20 m/min (optional 30 m/min) Adoption of the edge banding machine's forward stroke speed is possible (0 - 10 V) Electric drives with frequency converter and gear motor Pneumatic lifting function Workpiece detection via sensors Control unit with 3.2" display Height adjustable from 800 - 1000 mm Maximum weight: 60 kg Paint finish RAL 7035 Conveyor belt Conveyor belt for the return transport of the panels Speed of the return conveyor belt: 7-30 m/min Conveyor belt width: 800 mm Roller conveyor Slightly inclined adjustable roller conveyor with plastic rollers and stop for installation after the dryer as an outfeed station for the returned panels Conveyor belt width: 800 mm Variant 3 for left-hand running edge banding machine Incl. packaging A… Length of edge banding machine 4800mm – 5300mm B… Length of return conveyor belt 3000mm C… Length of roller conveyor 2500mm Roller track 1-lane with RTS Compact conveyor system extension. Addition of an additional free-standing roller track as well as a roller conveyor and lifting unit to support large parts. Using adjustable pivot points, the panels are rotated after transfer and returned almost straight via the return conveyor belt. Pneumatically controlled top pressure. Part lengths: 300 - 2400mm Part widths: 200 - 800mm Panel thickness: 8 - 35mm (panels must be inherently stable) These part sizes are recommended by Barbaric. Parts with deviating dimensions may not be functional and can cause problems. Increasing the panel length with end-face edging can lead to a risk of crushing on system components as well as on-site objects or hall columns. Ergonomics package RTS Compact Stk Ergonomics package RTS Compact consisting of a lifting table and measuring devices. Lifting table: 1960 x 960 mm. Dimensions of the blowing table: 960 x 760 mm. Steel construction with attached air cushion table with blowing nozzles for easy lifting. Table can be pneumatically lifted. Storage location: Garbsen Ibjdpfjw Sy Tmsx Aacsc

Year of construction: 2023, condition: new, Rental system Hosokawa Alpine AS 200 Baseline. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without aspirator) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW Ibsdpfxsm Nbnro Aacsc REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 23 μm 33 kg/h Nifedipine 90% ᐸ 2.4 μm 8 kg/h Progesterone 90% ᐸ 9 μm 20 kg/h Diosmin 90% ᐸ 4 μm 8 kg/h Omeprazole 99% ᐸ 5 μm 3 kg/h Cosmetic powder 90% ᐸ 10 μm 15 kg/h A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: like new (used), Year of construction: 2023, functionality: fully functional, volume flow: 400 m³/h, pressure: 16 bar, PSA filter for cleaning hydrogen from steam methan reformer to 99.999%. Further details in attached documents. Capacity 400Nm3 per hour. The PSA has not been used and price is negotiable. Operation pressure between 9.5-15.5 bar. We also have compressor suitable for the PSA. Ibjdpfxjxhcygj Aacoc

Condition: ready for operation (used), Year of construction: 2008, Three cooling lubricant systems with Hyfra cooling units are available. On-site viewing is possible. Ibsdpfxjxmkb Aj Aacec

Year of construction: 2010, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Hosokawa Alpine 250 TTSP air classifier specifically designed to produce the perfect fineness cut for toner, can be used in connection with the Alpine 630 TFG jet mill Design: non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: Ijdpfogulqhjx Aacjbc 250 TTSP with 2 x 5,5kW motors, process gas distributor, filter, blower

Condition: used, Year of construction: 2023, operating hours: 500 h, functionality: fully functional, power: 200 kW (271.92 HP), type of input current: AC, We are selling parts from a Steam Methan Reforming plant in Norway. In this case we have two heat exchangers and one electrical steamer from a company Boiler Tech in Norway. Documentation in the attachments Ibjdpfx Aasxg I A Rjcjc

Condition: ready for operation (used), Year of construction: 2020, Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible. Ibjdpjxl Upbofx Aacjc

Year of construction: 2008, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Iodpfx Aei Ezf Soacebc Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used fine impact mill Hosokawa Alpine Contraplex CW 400 pin mill. The Contraplex pin mill is fitted with two contrarotating pin discs achieving high relative speeds, allowing it to reach finer end products than our traditional universal mill type UPZ. This grinder is suitable to comminute many different products for all kind of industries, like chemicals, food, pharma, etc. Material of construction: cast iron Wide chamber design, for processing greasy, oily, sticky materials, etc. which tend to form deposits Non Pressure Shock Resistant (NPSR), non gas tight Without wear protection Scope: Hosokawa Alpine CW 400 with pin discs and motors

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Ibedpfxjxl Elgj Aacec

Year of construction: 2002, condition: reconditioned (used), functionality: fully functional, Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. Technical details Pharma design, in stainless steel: product contacted parts AISI 316/316L Isdpfx Aorvil Tsacjbc gas contacted parts at least AISI 304 non contacted parts stainless steel Gas recirculation, suitable for inert N2 operation non pressure shock resistant (NPSR) TO BE CONFIRMED Scope of supply Pharmaceutical system comprising: feed material container docking station with dosing screw, rotary valve, 160 UPZ mill in tangential discharge design and installed on a mobile platform, with a 7,5kW motor isolated from the mill production area, piping, filter and discharge closing valve, heat exchanger, blower, platform with stairs, etc. TO BE CONFIRMED A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 1997, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Ibedsg Uwa Nopfx Aacec Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Used Hosokawa Alpine ACM 30 classifier mill, in normal steel, NPSR, non ATEX. Consisting of complete mill with motors Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindrical classifying wheels. • Cool and gentle grinding thanks to high air flow rate. The ACM is thus ideally suitable for processing temperature-sensitive products. • Deflection zone in grinding chamber cover: classifier gap rinsing not necessary. • Low noise emission. • Smooth running characteristics as a result of the belt-driven grinding disc. • Simple to maintain: motors and bearings easily accessible. • Cover lifting device ensures fast access to the grinding and classifying zone for cleaning and retrofitting. • Extremely compact and space-saving design. • Optional: wear-protected design. Mill drive: 22 kW Mill speed: 5.100 rpm Classifier drive: 5,5 kW Classifier speed: 4.900 rpm Air volume: 2.700 Nm/m³

Year of construction: 1996, condition: refurbished (used), Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, etc. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the liner in order to break them. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the griding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Material of construction: stainless steel for product contacted parts Without wear protection Ibodskqlf Sopfx Aacoc Non Pressure Shock Resistant (NPSR), non-ATEX Scope of supply: Hosokawa Alpine ZPS 315 mill with motors, a set of grinding tools of choice and installation table

Year of construction: 1991, condition: refurbished (used), Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, etc. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the liner in order to break them. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the griding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Material of construction: mild steel Without wear protection Non Pressure Shock Resistant (NPSR), non-ATEX Scope of supply: Ibjdpolgy U Nefx Aacsc Hosokawa Alpine ZPS 315 mill with motors, a set of grinding tools of choice and installation table

Year of construction: 2022, condition: new, Rental unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle sizes between 0,5 and 10 mm depending on the feed product. The AFC can be used for mixture homogenization, flakes granulation, disintegration of agglomerates, increasing bulk density and flowability of clumped materials. It´s fitted with a rotating grinding tool which can work in combination with a sieve of choice to adjust the resulting product according to specification. The sieves exchange is quite fast reducing the unit´s downtime. Suitable for different industries such as pharmaceutical, food, chemicals, etc. Material of construction: stainless steel Without wear protection Non gas tight Non Pressure Shock Resistant (NPSR) Scope: Flake Crusher, motor, controls and screens according to requirements Ibodpfoh Utyrjx Aacoc

Year of construction: 2008, condition: used, A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Isdpohrnc Eefx Aacobc Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used universal fine impact mill Hosokawa Alpine 250 UPZ. This turbo mill is able to pre-cut and produce medium to fine products. Can be fitted with different grinding tools in order to adapt to each specific grinding needs. This mill is suitable to process many different products for all kind of industries, like minerals, chemicals, food, etc. Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Without wear protection Non pressure shock resistant (NPSR) Scope: Hosokawa Alpine 250 UPZ, with 11kW motor, a set of grinding tools of choice, with installation table and suction tank.