Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of construction: 2016 For cleaning grinding emulsions Supply of max. approx. 250 L/min. at approx. 3.5 bar water Transfer to the filter system is carried out by the customer, air and foam-free. Temperature max.: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Separation particle size: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particles: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via customer-provided lift stations. The swarf and fine sludge produced during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system runs fully automatically. Rsdpfx Acjzwccmohjcf Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharge of grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Volume max.: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical discharge volume max.: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 Bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with an internal, circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without handrail, without internal rungs Volume max.: approx. 0.55 m3 25826

Year of construction: 2014, condition: used, Capacity / kg/h / type / material / Two-component (2K) adhesive dispensing and mixing system – FERE / Walther Pilot For sale: a used, fully automatic 2K adhesive dispensing and mixing system. Manufacturer: FERE Dosier- und Klebesysteme GmbH Year of manufacture: 2014 Material pressure: up to 6 bar Control voltage: 24 V DC Operating voltage: 3 × 400 V / N / PE Dispensing system: Servo-electric drive Includes Walther Pilot pressure vessel and pneumatic cylinders The system was used for dispensing and mixing 2K adhesives on trim strips and is also suitable for similar applications. Used condition Sold as shown Viewing possible by appointment Rcjdpfozhxnajx Achjf Assistance with loading available Please contact us if you have any questions or are interested.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Rjdpfezmt Ufex Achecf Four pumps available across three models: 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly.

Year of construction: 1996, condition: used, machine/vehicle number: 7200124-01, For sale is a high-pressure pump from the company Abel, manufactured in 1996. Flow rate: 19 m³/h Pressure: 10.0 MPa Oil volume: 7.5 dm³ Stroke rate: 420 1/min The pump can be inspected upon request. Rcodpfx Acozwk H Tshjf

Condition: used, Manufacturer: Waldner Model: Pilotanlage 200L Year: 2003 Condition: Used Serial Number: 2791 Stock Number: 3420 Capacity: 200 litre Mixing speed: max 25 RPM Pressure: -1 - max 4 Bar Vacuum pump: SIHI LEMB91 AZ Temperature: max 150°C Heating: steam, double jacket and heating spiral Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 4kW Dimensions: 2900 x 1300 x 2300 mm Weight: 1200 kg Horizontal cooking installation for pressure cooking with vacuum and CIP system Rcedozruu Ropfx Achof

Year of construction: 2021, condition: excellent (used), functionality: fully functional, IKA MHD 2000/10 powder wetting and dispersing machine, capacity 2500 liters/hour, solids capacity max. 1300 liters/hour, rotor speed 4200 rpm at 50 Hz, 18.5 kW motor suitable for frequency converter 20-60 Hz, product temperature max. 135°C, operating pressure -1 to +16 bar, operating pressure double jacket max. 2.5 bar, liquid inlet DN 25, solid inlet DN 65, outlet DN 50, product contact parts stainless steel AISI 316L or AISI 316Ti9, frame and lantern piece stainless steel AISI 304, weight approx. 400 kg, used in the production of plant-based proteins (pilot plant) Rcedpfx Acozu I Tfshsf

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The machine is unused! TECHNICAL DETAILS Rotor: Open rotor Grinding mechanism: 650 mm × 550 mm Application: Grinding of, for example, lumps MACHINE DETAILS Power: 22 kW Voltage: 380 V Frequency: 50 Hz Current consumption: 42.5 A Speed: 1,470 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – Continuous operation Sound level: 71 dB(A) Weight: approx. 190 kg EQUIPMENT Rcedpfxozr Hzis Achjf Control system Star/delta connection possible Spare parts can be supplied for an additional charge.

Condition: used, Netsch Membrane Chamber Filter Press Format: 1200x1200 Number of plates: max. 100 Plate material: PP Rodpfxezvahwo Achecf Filter area after expansion: 142 m2 Press volume after expansion: 1980 l Cake thickness: 30 mm Dimensions: L 11182 mm x W 2580 mm x H approx. 4100 mm Weight: 25800 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 133106 & 133312, New material feeder, system Pailfeed PF803, year of manufacture 2024, unused, including control unit DS 503. Designed for reliable, clean, and bubble-free conveying of medium- to high-viscosity single-component materials from a container. Dispense module not included! Two units available. Please specify the desired quantity with your offer. Optional accessories such as UV-curing devices are offered separately. Supplier: Dr. Hönle AG. --- Please quote your price offer. Sale only within Europe (EU), including Turkey, Great Britain, and Switzerland. --- Technical specifications can be found in the handout. Supplied without packaging; all warranty rights are excluded. Should you wish to dismantle the system yourself, please note this in your offer. Rcodsw Dd Rzjpfx Achsf We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: good (used), 2x drawer cabinets with 5 drawers, Lokoma – used: Price per unit: €295.00 (net), ex works! Manufacturer: Lokoma Type: unknown Year of manufacture: unknown 5 drawers Dimensions: Height: approx. 80 cm Width: approx. 57.5 cm Depth: approx. 61 cm Condition: good Rodpfxozv Iqye Achecf Available: immediately Location: Frankenberg/Saxony warehouse

Year of construction: 2009, condition: not inspected (used), Test bench DTB 2 Redpfx Acskvn R Rshjcf Year of manufacture 2009 disassembled The offer is directed exclusively to traders in the sense of § 14 BGB (German Civil Code). No sale to private individuals!

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Rcedpfx Ajzxgtfochsf Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement.

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Redpfx Acjztmwyohjcf Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, The Herbold PU 500 pulverizer is suitable for fine grinding of plastics and soft to medium-hard materials. Rcjdpfjztmwtox Achof Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Drive 37kw (ca be changed to max. 75 kw) rotor diameter 500 mm Rcodoztmwmopfx Achjf rotor width 600 mm 5 knive scissor cut, housing hingeable, with 2 stator knives Opening inlet 500 x 600 mm

Condition: used, Multiple knife mill / granulator with rotor with 16 knives 6 stator knives Rcodpeztmwgofx Achef Drive 90 kW With equipment

Condition: used, Hollow body granulator and secondary granulator for pre-shredded material. Rotor diameter 450 mm Rotor width 600 mm 3 rotor knives (diagonal cut), 2 stator knives Rcodpfx Asztmwaechjf Drive motor 22 kw

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Rcsdoztmv Njpfx Achjf Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Rodpeztmv Asfx Achecf Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Rcedpfx Acsztmvvehof Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm Rcodjztmvpjpfx Achjf

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Rcjdjztmviopfx Achef Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required Rcsdoztmvcopfx Achjf With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Cutting mill / cutting mills Rcedpfjztmu Eox Achsf Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Rcsdpfxjztmuro Achjf Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size