Condition: excellent (used), Year of construction: 2007, Ref:11119 . 2007 Sicom MVIR/E Ring Binder Riveter. Processes: Twin head riveting m/c Hand feed of cases & ring mechanisms Riveting of ring mechanisms to cases. Hjdpfjzkgflsx Ahnsfi

Condition: ready for operation (used), 1 x stitching unit 380 2 x stitching heads HK75Q 1 x Touch screen Navigation control 1 x oblique sheet saddle monitor 1 x remote control inch 4 x section feeders 370 1 x cover folder feeder 1529 Hsdoyuk S Sspfx Ahnefi 1 x three knife trimmer 449 1 x stream delivery 1564 Optional; 2 x loop stitching heads 1 x Rima stacker

Condition: ready for operation (used), 1 x stitching unit 1550 1 x Touch Screen Navigation control 2 x stitching heads HK75Q 6 x section feeder 1551   fitted with ASIR camera recognition              ONLY 2,600 hours from NEW 1 x cover folder feeder 1528 Hedozlu Siopfx Ahnefi 1 x three knife trimmer 1565 1 x stream delivery 1564 Optional if needed; Waste extraction system Loop stitching heads Standards stitchinbg heads Slim line stitching heads

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, Rev. Speed: 9 revs/min Height: 900 mm (35.43 in), adjustable ±50 mm (±1.97 in) Diameter: Ø 1150 mm (45.27 in) Electricity supply: 250 W, 1 A, 230 V, 1 Ph, 50 Hz (110 VAC, 2 Amps, 60 Hz) Hfedpfstp I Dcjx Ahnei Castor wheels with brakes Load: 80 kg (176 lbs) Materials used: stainless steel AISI304, food grade ALU and PE CE marking

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Hfedpoyk Ip Tefx Ahnei Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: ready for operation (used), Round pile feeder DCT digital control 6 plates 2 knives Side pocket Presser strean delivery Hfedpfxstcx Iuo Ahnoi

Condition: ready for operation (used), Hole Punch Centre cut Hfjdpfxsir A Hao Ahnsi Slim line stitching heads

Condition: ready for operation (used), Round pile feeder Hjdpstcx Iqjfx Ahnjfi 1st unit 6 plates 2nd unit 6 plates 3rd unit 4 plates Heidelberg TSH twin stacker delivery

Year of construction: 2007, condition: used, Case maker Kolbus DA 260 Year: 2007 Description: - Board magazin for manual loading - Centre strip infeed (stiff) - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing quarter-bound cases in 2 passes - Device for producing padded cases - Pressing station - Stacking delivery Hodpozl Ruyefx Ahnefi Max. mechanical speed: up to 40 cycles/min Size range opened case (max): 670 x 390 mm. Size range opened case (min): 205 x 140 mm. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2011, Perfect binder Wohlenberg Quickbinder Year: 2011 The Quickbinder from Wohlenberg is intended not only for expanding smaller-sized companies making the jump to quality book binding applications, but also for large, industrial-scale book binding companies who can utilize the machine for the production of superior, high-quality samples and editions. Description: Hfjdpfx Aszl Edpehnsi - Motorised setting - Colour monitor with touch screen: Navigator - Solo perfect binder - Hand feeding - Number of clamps: 5 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - Hotmelt side glue unit - Rotary cover feeder - Nipping and pressing station - Belt delivery Optional available: Wohlenberg lay down delivery for connection to a conveyor system / three knife trimmer Description modified on Max. mechanical speed: up to 2.000 cycles/h Maximum size range (wxhxt): 430 x 320 x 70 mm Minimum size range (wxhxt): 110 x 105 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75            ONLY 3,800 hours 1 x SEMKO side caliper with reject 6 x section feeders 1551 Hfjdpfev Ap Iwex Ahnji 1 x cover folder feeder 1528 1 x three knife trimmer 1565 1 x stream delivery 1564

Condition: ready for operation (used), Pallet feeder PF Touch screen Navigation with auto set plates rollers 4 plates 2 knives Side pocket heidelberg presser stacker delivery Hfedpfx Ahsyx Nltensi

Condition: used, Year of construction: 2001, Folding machine Heidelberg Stahl folder KD 78/4KLL Year: 2001 Description: - 32 page folder Feeder - Flat pile feeder Hedpfeyi Ub Tex Ahnofi - Pump Folding unit Heidelberg Stahl folder KD 78/4KLL - Glue unit - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Second cross fold to the left - Third cross fold (left) - Excluding noise hoods Delivery Heidelberg - Stream delivery

Year of construction: 2016, condition: used, Dürrer Rega 3 Year 2016 Hfsdpfx Aezlrkcjhnei Automatic machine to cut step indexes Suitable for hard- and softcover products! Equipped with: - Colour touch screen monitor - Two handling and outfeed stations - Transfer unit - Parallel edge-counting unit with control system - Cutting unit - Mobile work bench for the counting and cutting unit - Conveyor belt for paper waste disposal - Electrical cabinet Complete with: - Thumb cut block - 90 degree cut block - 1 x size tool Output: 100 – 1500 pieces/hour ( multiple use ) depending on thickness of product and operator etc. Book thickness: max 50 mm Max size: 350 x 350 mm Min size: 120 x 100 mm

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Web guide Web width 330 Hfedpfxeylpvde Ahnji In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg !! Available for immediate sale !!

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Hsdoydnxnjpfx Ahnofi Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: excellent (used), Year of construction: 2000, Ref:11106 . 2000 Polar LW 1000-4 Pile Lift. B1 size mobile lift with steel plate base. Features:- Easy reach control panel Hedpfx Ahoy Uybkenofi Hydraulic drive Automatic lifting/lowering mechanism for continuous working at a constant correct height High CE safety standard. Specification: Capacity, Max: 1000 kg Pallet size, Max: 80 x 120 cm Platform, Max: 80 x 127 cm Lift stroke, Max: 85 cm Electrical req. : 3pH, 400V, 50Hz Floor space : W144 x D130 cm (with pallet).

Condition: excellent (used), Year of construction: 2011, Ref: 11100 . 2011 Duplo DPB-500 EVA Perfect Binder Excellent condition! Only 40,000 books on the counter! Single clamp solo binder designed for the digital book-on-demand market with operation by one person. Hfjdpfx Asy Nzclohnji Features: • EVA spine glue unit • Programmable pre-melter • Computerised set-up with icon based touch-screen • Automatic setting of clamp book thickness and cover scoring • Double/Out of cover detector • Light beam score positioning • Milling & roughing unit with dust bag extraction • Internal vertical stacking tray delivery Specification: Book thickness: Min 1mm / Max 51mm + cover thickness Book size (spine × fore-edge): Max 360mm × 320mm Min 120 × 120mm Cover size: Max 360 × 696mm / Min 120 × 250mm Cover weight: 80-302gsm Cover Pile height: 70mm Mechanical speed: Max: 525 /hour

Condition: excellent (used), Year of construction: 2018, Ref:11117 . 2018 Muller Martini HK75Q Stitching Heads (pair) HK75Q quick setting stitching heads in good working condition (without bottom clincher). Specification: Min. center distance: 75 mm Min. wire length: 24 mm, Max. wire length: 32 mm Min. leg length: 6 mm, Hfjdst Dpqqepfx Ahnei Max. leg length: 9 mm Max. stitching thickness: 5 mm Also available: Ref:11116 . 2018 Muller Martini HK75Q Stitching Head (single) Ref:10679 . 2005 MULLER MARTINI HK45 NARROW (pair) Ref:10678 . 2002 MULLER MARTINI 0249 LOOP (pair) Ref:10677 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10676 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10675 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10674 . 2010 MULLER MARTINI 0249 LOOP (single)

Condition: excellent (used), Year of construction: 2017, Ref: 11039 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette AutoCollator Delivery Hsdpfxjxyxtto Ahnjfi High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: excellent (used), Year of construction: 2017, Ref: 11038 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: Hfjdpfx Ajxyxr Njhnsi 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: used, Year of construction: 2016, Ref:11045 . 2016 Dürselen PB 04 N Paper Drill Free standing 4 headed paper drill Equipped with: Four drilling heads with adjustable spacing. Pneumatic cooling and lubrication for drills. Automatic drilling cycle, foot pedal control. Waste directed to outer door Hodpfox Nfp Asx Ahnofi Drill table with adjustment, front and side margins. Table lock is automatically released. Technical data: Diameter of the drill: 2-10 mm, Stack height: 60 mm.

Condition: good (used), Year of construction: 2007, Ref:11104 . 2007 Kolbus KM473 Ratiobinder Line 8,000 p/h EVA perfect binding line with gauzing. Equipped with: 18 station ZU 804 gatherer with over track feeding including 2 x hand feed AS 800 reject station for over or incomplete books Downstream delivery belt Ratiobinder KM473 - 24 clamps with ‘Co-pilot’ touch-screen monitors Milling/brushing, equalizing milling & brushing units Interchangeable gluing system comprising; Kolbus LH370 EVA hotmelt pre-melters EVA hot-melt spine glue EVA hot-melt disc side glue Gauzing unit Pile cover feeder with scoring 2 x Cover nipping/pressing stations Flat TS.Z conveyor system to (2010) Kolbus HD143.P pile trimmer with ‘Co-Pilot’ pre-setting Specification: Hodpfx Ahoy T Ii Hjnjfi Book size, Max: 383 x 320 mm Max: 460 x 190 mm Min: 105 x 100 mm Book thickness : 3 -- 70 mm Mechanical speed, Max: 8,000 cycles/hr.

Condition: excellent (used), Year of construction: 2006, Ref:11110. 2006 Muller Martini ‘Bolero B8’ Perfect Binder 8,000 p/h perfect binding line. Comprising: 12 x 3693/24" top loading feeders Solema ‘Fastbook’ Book block feeder Muller Martini “ASAC” calliper control Muller Martini “ASIR III” signature recognition Reject system with downstream delivery M.M. Automatic motorised make-ready with “Commander” Control System. Book transfer section with main drive motor Muller Martini Bolero 3028/24" with 21 clamps Spine preparation units with cutting/milling, equalising notching Interchangeable glue system comprising; Hedpfxezb Rfxe Ahnsfi PUR spine glue pre-melter PUR spine gluing tank on universal base 2 x EVA hot-melt pre-melt tank EVA hotmelt spine & side glue tanks Inclined stream cover feeder with 6 line score 2 x cover nipping stations Lay-down delivery unit to; Flat & spiral conveyor system to; (2007) Kolbus HD 153.P trimmer to; Rima RS-3313S compensating stacker Specification: B8/24” Binder book sizes, Max: 510 x 320 mm Min: 140 x 100 mm Clamp opening, : 2 -- 80 mm Final book thickness : 3 -- 60 mm Mechanical speed, Max: 8,000 cycles/hr.

Condition: excellent (used), Year of construction: 2009, operating hours: 19,000 h, Ref:11108 . 2009 Muller Martini ‘Acoro A5’ Perfect Binding Line Excellent condition line with only 19,000 hours worked! Comprising: 16 x 1571/21" top loading feeders + hand feed station ASAC thickness control ASIR III signature recognition & 3715 reject unit M.M. 3642 automatic book block feeder M.M. 'Commander' automatic make-ready Muller Martini 3026-20 ‘Acoro A5’ with 20 x Combi-clamps Measuring table for automatic make-ready Hfedpfxszaa Rbe Ahnei ICS C80 & 30 EVA pre-melt tanks EVA spine gluing tank EVA Hot-melt side gluing tank Gauzing station Pile/rotary cover feeder 2 x nipping stations Lay-down delivery unit to; Two tier 180 degree flat conveyor system to; M.M. 3671 ‘Merit S’ three knife trimmer Including accessories, tools & manuals. N.B. Compressed air required – NOT included. Specification: A5/21” Binder book sizes, Max: 430 x 320 mm Min: 140 x 100 mm Book thickness, : 3 -- 60 mm Clamp opening, Max: 82 mm Open cover width, : 203 - 642 mm Mechanical speed, Max: 5,000 cycles/hr.