Used paint finishing systems for sale (97)

Year of construction: 1987, condition: used, machine/vehicle number: 29990, Volume flow: 300 cm³ Gksdpebnpc Ujfx Aaysf Overpressure: 231 bar Max. volume flow at 25 DH/min: 7.5 l/min Inlet overpressure or required air pressure: 7 bar Air consumption: 9,7 l/DH Weight: 100 kg Space requirement: 1250 x 750 x 1400 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Double-sided component painting line fully automatic Working width of the line 1300 mm The line consists of the following devices: - Vacuum feeder - automatic feeder before painting - GIARDINA Dualtech 416 automatic paint machine - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - material turntable - automatic painting machine RICHFRUITS - 2 x 12m hot air drying tunnel Gkodpfstut Dxox Aayjf - UV dryer - 3 lamps - Vacuum feeder Machine in working order, connected in very good condition.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: Gksdpfewzl Hxsx Aayef After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Gkjdpfewmm U Uex Aaysf

Condition: excellent (used), Manufacturer: Graco Type: B05A - 232434 Max. temperature: 50 °C Max. air: 0.7 Mpa, 7 bar, 100 PSi Max. liquid: 16 MPa, 160 bar, 2300 PSi Gksdpfx Aaetq Sa Noyof Weight: 20kg

Condition: not inspected (used), Paint booth, manufacturer: Walther Pilot Gedpfow U R Dzex Aayjkf

Condition: excellent (used), functionality: fully functional, BMB Coating System for Printed Circuit Boards, Model TUA-200 / 2 in EXCELLENT condition. Purchased: 2023 (as-new condition) and only in operation for 6 months. Version: Professional Version (excellent feature set) - High speed coating up to 4x faster - 3 coating processes in one unit - Suitable for components up to 1200x570 mm - Permanent viscosity/temperature control - Full traceability (depending on version) - Tool recognition and parameterization - Maximum protection by encapsulating components with coating - (Digital job-documentation system, currently under review) - Large paint tank capacity for tall components Gkodpsv I Tb Eofx Aayef - Paint consumption calculation - Innovative, robust, and proven technology With the BMB Traceability and PDM System (equipment subject to clarification), you can track at any point which component was produced, when, where, by whom, and how. All requirements regarding ISO/TS 16949 are fulfilled. When setting up a tool, the PDM system automatically recognizes all necessary parameters for coating. Work instructions, videos, technical data sheets, processing notes, etc. – everything at your fingertips! 19″ swivel smart touch panel Viscosity control Tool monitoring: automatic recognition and adjustment Electrically height-adjustable machine Coating processes: - Dip Coating (DipCoat) - Selective Contact Coating (SCC®) - Selective Transfer Coating (STC®) The system can be shipped by freight carrier upon request. #8300

Condition: new, Year of construction: 2025, total length: 19,100 mm, total width: 6,600 mm, total height: 5,000 mm, inner dimension height: 4,000 mm, inner dimension length: 18,000 mm, inner dimension width: 6,000 mm, We offer the production of foldable, "accordion-style" spray booths in any dimensions and specifications defined by the client. Example projects can be seen in the photos. Gjdpfxjvphfzo Aayjkf As a manufacturer, we handle the design, production, installation, and warranty service of spray booths. Our offer includes a wide range of spray booths – we encourage you to check out our other listings. Feel free to contact us!

Condition: new, Year of construction: 2025, functionality: fully functional, space requirement width: 3,200 mm, space requirement length: 1,200 mm, space requirement height: 2,100 mm, overall weight: 170 kg, total width: 3,200 mm, total length: 1,700 mm, inner dimension width: 1,500 mm, HEAVY DUTY Drying Trolley / Cantilever Trolley – Designed for the Toughest Demands Key Facts at a Glance: 1. Ball bearing sliding rail for width adjustment from 1.70 to 3.00 m span 2. Space-saving, nestable design 3. High intermediate clearance of 135 mm for easy loading even at fast work cycles 4. Upright square tube support for a minimal contact area 5. Generous usable depth of 1,000 mm 6. High load capacity of 1,000 kg 7. Premium-quality casters for effortless movement, even when loaded Genuine high quality – made in Denmark. The trolleys are generally available directly from stock. To reduce shipping costs for our customers, we deliver the trolleys pre-assembled (see picture). Final setup is very quick and easy. Gksdpfx Aaefiuhvsyof Do you have any questions? Contact us – we are happy to assist!

Condition: used, Paint casting machine, paint casting machine, paint casting station -Paint casting machine -Manufacturer: Burkle -Max. Casting width: 1290 mm -Adjustable casting gap: via handwheel with display -hydraulic: height adjustable -without: paint pump Gkodpfx Ajc R Iyaoayef -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: good (used), Year of construction: 2012, Sigel coating machine Prima V6 Nordson incl pump coating machine incl filter pump S16 Gjdpfx Aajn Rym Noyokf used condition, from running operation, overhaul by experts recommended (contact can be arranged)

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Godpfx Aev Ed Uksayskf Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: used, Year of construction: 1996, functionality: fully functional, Hymmen PFC ProFiCoater 1300 mm Year: 1996 Gsdpfjvy Ec Eex Aayokf TYPE PTC/1400 1300 mm wide / S-RCL-002

Condition: good (used), Painting booth with suction device and cabinet Article: Spray booth with extraction unit and cabinet Dimensions spray booth: 72 cm wide, 60 cm deep and 80 cm high Cabinet dimensions: 72 cm wide, 109 cm deep and 100 cm high Number of drawers: 6 Colours: green and black Condition: used  Gjdog I Dhgspfx Aayekf Complete factory locker, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, inner dimension height: 1,950 mm, inner dimension width: 1,850 mm, No. 3230 Complete paint shop Wagner Rafi / Wildcat / Finish 104 B Ex Used Complete spray room equipment Spray wall Rafi mobile 1850 x 1950 mm width x height 2 drying trolleys 1 spray gun Wagner Wildcat / IceBreaker motor / pump type 18 - 40 1 Wagner Finish 104 B Ex sprayer Sale by customer order, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Gksdpfx Aown Tvusayjf Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, Coating roller machine, roller application machine -Transfer in current condition as seen -Manufacturer: Giardina -Max. Width: 1260 mm -Casting gap: adjustable -with: 3x brush units Gsdpjc Uv Ncefx Aayskf -Connection power: 11 kW -Dimensions: 4600/2360/H1600 mm -Weight: approx. 4000 kg

Condition: used, Powder Coating Plant - Automatic The plant moves with conveyor system. The material to be powder coated is hung on the line, the system automatically follows the steps below and powder coats the material after cleaning it. Godpjv Npa Hjfx Aayskf The best project suitable for the existing facility is made. Special design is made according to the customer's product and needs.

Condition: used, Rack trolleys, paint drying trolleys, shelf transport trolleys, transport trolleys, shelf trolleys, support arm trolleys Godpfx Aer Ngp Asayokf -Trolley: Paint drying trolley, heavy-duty version with 15 levels -Total length: 1660 mm -Total depth: 700 mm -Total height: 2040 mm -Number: 1x transport trolley available -Weight: 93 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Powder Coating Plant With Conveyor Our experienced team prepares powder coating plant in special design and special sizes for each project. Please contact us for detailed information Gksdpfx Aajv Nv Dfsyjf - Conveyor system - A conveyor system is a common piece of mechanical handling equipment that moves materials from one location to another. Conveyors are especially useful in applications involving the transport of heavy or bulky materials. Conveyor systems allow quick and efficient transport for a wide variety of materials, which make them very popular in the material handling and packaging industries. They also have popular consumer applications, as they are often found in supermarkets and airports, constituting the final leg of item/ bag delivery to customers. Many kinds of conveying systems are available and are used according to the various needs of different industries. There are chain conveyors (floor and overhead) as well. Chain conveyors consist of enclosed tracks, I-Beam, towline, power & free, and hand pushed trolleys

Condition: used, Paint pouring machine, paint pouring machine, paint pouring station, paint pump, emulsion pump, dosing pump Gkodsfv H Aispfx Aaysf -Gearbox: Stöber Type R27-0000-110-4 -Speed: 800 - 1820 rpm -Engine: HEW type EEXF-S/4 -Power: 1.1 kW -Dimensions: 300/400/H935mm -Weight: 43kg

Condition: good (used), Rack trolleys, paint drying trolleys, compartment transport trolleys, transport trolleys, shelf trolleys, support arm trolleys -Trolley: Paint drying trolley heavy duty with 16 levels -Total length: 1200 mm -Total depth: 700 mm -Total height: 2000 mm Gksdpfx Aetr R Dbsayof -Number: 10x transport trolleys available -Price: per piece -Weight: 60 kg

Condition: used, Rack trolleys, paint drying trolleys, shelf transport trolleys, transport trolleys, shelf trolleys, support arm trolleys Gkedpfotr R Dfex Aayef -Trolley: Paint drying trolley, heavy-duty version with 11 levels -Total length: 1200 mm -Total depth: 580 mm -Total height: 1955 mm -Weight: 56 kg

Condition: used, Rack trolleys, paint drying trolleys, compartment trolleys, transport trolleys, shelf trolleys Gkodob Hw D Ropfx Aaysf -Total length: 1190 mm -Total depth: 720 mm -Total height: 1800 mm -Weight: 66 kg

Condition: used, Lacquer roller machine, roller application machine, powder coating plant -Powder coating system: used for slats/blinds production -Pneumatic components: Manufacturer Festo -Geared motor: WEG 0.25 kW -Dimensions: 3400/850/H1935 mm Godpfegal Anjx Aayokf -Weight: 746 kg

Year of construction: 2000, condition: used, Trolley, paint drying trolley -Total length: 1400 mm -Total depth: 960 mm Gedpfx Aob A Hcmjayskf -Total height: 2000 mm -Compartment height: 28 mm -Payload: max. 15 kg -Number: 2x cars available -Price: per piece -Weight: 127 kg/piece