Used Paint Mist Extraction for sale (8,157)

Condition: new, Year of construction: 2025, AL-KO Colour Jet 1 Paint Mist Extraction System Paint mist extraction system, ready for operation, with a 1 m² filter area including a pre-filter and a fine filter. Connection diameter: 300 mm, motor: 1.5 kW (suitable for installation in Zone 22 according to ATEX), switch: 1-stage, plus a 5 m cable with plug and throttle valve. Compact, space-saving steel sheet construction. Chassis with wheels. Indirect extraction near the floor. Completely pre-assembled. With connection cable and phase reversal device. Adjustable side panels. Optimized spray mist extraction through a patented front panel hood. Long filter life. High-performance fans with low noise levels. Psdpobumr Ssfx Agxegp Filter wall with special mats. Exhaust nozzle with integrated throttle valve. Motor power: 1.5 kW Speed: 1400 rpm Nominal volume flow: 4600 m³/h Pressure: 500 Pa Dimensions (W*H*D): 1025*1437*1214 mm (W = 2000 mm with side panels) Filter area: 1 m² Weight: 175 kg

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Pjdpfxevvizkj Agxsgp Storage location: Garbsen

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops Pedpewv T R Ujfx Agxogp - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Pgsdpfxewydgzs Agxjp

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Pgodpeu T Hrpjfx Agxop Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: Pedpezlktpofx Agxjgp in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2433380060, overall weight: 176 kg, nominal power: 0.75 kW (1.02 HP), rotational speed (max.): 950 rpm, protection type (IP code): IP54, The devices in the COLOUR JET series are optimally designed for extracting paint mist and solvents at wet painting workstations. The front guide plate ensures that the mist is captured from below and at the side inlets, as solvents from paints settle and collect near the floor. At the same time, the guide plate enables uniform air distribution over the filter and protects the filter medium from direct exposure. Paint pigments are separated by the large-area replaceable filter, and the cleaned exhaust air is then discharged to the outside via a pipe or hose. Pgjdpozkgwnofx Agxop Dimensions (W x D x H) in mm: 1,012 x 1,405 x 943

Condition: excellent (used), Servatechnik extraction Pgedpfx Agsx Nbnnjxjp

Condition: excellent (used), AZZURRA CS4B Spray Booth Wall Length: 4000 mm 2x cardboard filters Pint Stop filters Pedpoyh E Hnsfx Agxsgp Filtration capacity ~ 15,000 m3/h Motor power: 4.0 kW CE marking

Condition: like new (used), Year of construction: 2011, functionality: fully functional, volume flow: 230,000 m³/h, nominal power (apparent): 22 kVA, For sale: filter for removing haze from paint. Fine dust filter. Pgodpezhbqqefx Agxjp

Condition: excellent (used), functionality: fully functional, Olimpia SE3BSTD spray booth wall Length: 3000 mm 2x cardboard filter Pint stop filters Filtration capacity: approx. 11,000 m3/h Motor power: 2.2 kW Pjdpfxsy Rmyxo Agxogp CE mark Dimensions: 335x150x238 cm (H)

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Pgodoy Dpfwjpfx Agxsp Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Condition: very good

Condition: ready for operation (used), working width 4 meters fan motor power 4 kW set includes cardboard filter and paint stop filter Italian made electrical panel emergency stop button (STOP) filtration capacity 15,000 m3/h Podsy Nikkspfx Agxjgp year of production 2022 CE marking

Condition: new, Year of construction: 2025, functionality: fully functional, Fenice Plain Spray Booth Wall Brand new Available options: Plain-2000mm net price 17,800 PLN Filtration capacity 8,000 m3/h Pjdpfxoxz Ache Agxjgp Motor power 1.5 kW Plain-3000mm net price 21,500 PLN Filtration capacity 11,000 m3/h Motor power 2.2 kW Plain-4000mm net price 25,800 PLN Filtration capacity 15,000 m3/h Motor power 4.0 kW Plain-5000mm net price 34,000 PLN Filtration capacity 16,500 m3/h Motor power 5.5 kW Plain-6000mm net price 38,000 PLN Filtration capacity 22,000 m3/h Motor power 2.2 kW + 2.2 kW Custom sizes available on request

Condition: used, With bottom extraction attachment Pedpfeyxm Ekjx Agxjgp Extraction surface (W x H): 2400 x 1600 mm Airflow: 7000 m³/h Height: 2600 mm Depth: 800 mm Complete air supply system included (Wolf KG100 type) With drip tray Comes with control system

Condition: new, Year of construction: 2024, Surfaces (mm):1600 x 1600 Pedpsuyh R Aefx Agxjgp Air performance (m3/h): 5000 Suction pipe diameter (mm): 350 Height (mm): 2600 Depth (mm): 600/800

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Pgsdpfxszp Ihls Agxjp Technical data and information subject to change and error. Prior sale reserved!

Condition: good (used), Motor: 1.5 kW Quantity: 2 units Pgsdpfxjhc Sype Agxjp Price/unit

Condition: used, Industrial Extraction Fan, SARA UC 2 SD Serie II Industrial Oil Mist and Emulsion Mist Extraction Unit, Used Machine Overall Dimensions Width: 740 mm Depth: 550 mm Height: 720 mm Manufacturer / Distributor H. Sartorius Nachf. GmbH & Co. (Germany) Psdpfezgiaksx Agxsgp Model SARA UC 2 SD Serie II Technical Specifications Year of Manufacture: 2002 Serial Number: 02-6-338 Power Supply: 3~ 400 V AC / 50 Hz (Three-phase) Rated Current: 1.9 A Power Output: 0.9 kW Motor Speed: 2750 RPM Airflow Capacity: 1000–2000 m³/h

Condition: used, Oil Mist Extractor, Emulsion Mist Collector, LOSMA AS.7 Oil Mist / Emulsion Mist Separation Unit – Aspirofilter (2000), Used Machine Manufacturer LOSMA S.r.l. (Curno, Bergamo, Italy) Pgsdpfxjzdgawe Agxop Model AS.7 Overall Dimensions Width: 540 mm Depth: 580 mm Height: 610 mm Technical Specifications Year of Manufacture: 2000 Type: Oil Mist and Emulsion Mist Extraction Unit Series: Aspirofilter Condition: Used machine. Manufactured in 2000. Filter replacement required. Suitable for industrial oil mist and coolant mist filtration applications.

Condition: good (used), Painting booth with suction device and cabinet Article: Spray booth with extraction unit and cabinet Dimensions spray booth: 72 cm wide, 60 cm deep and 80 cm high Cabinet dimensions: 72 cm wide, 109 cm deep and 100 cm high Number of drawers: 6 Colours: green and black Condition: used  Complete factory locker, Pgsdpfx Ajg I Dhgjgxsp large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2007, condition: good (used), machine/vehicle number: 164883, OFFER 17015 Technical data: - BIA-certified welding fume extraction unit Pgsdpjhw Ev Ssfx Agxjp - Articulated extraction arm 3000 mm - Airflow rate approx. 1000 m³/h - Max. static pressure 2700 Pa - Filter area approx. m² - Filter control indicator for filter replacement - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108016, Offer 05394 Technical data: - BIA-tested welding fume extractor - Articulated extraction arm 3000 mm - Air flow rate approx. 1000 m³/h - Max. static pressure 2700 pa - Filter area approx. m² - Filter control light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Required space approx. W 700 x H min. 1800 x D 950 mm Psdpjwqdycefx Agxsgp - Weight approx. 250 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels Pedpfx Agsu Aafdoxogp - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Pgsdpfxsw Hw Dge Agxep