Used other welding machines & cutting equipment for sale (179)

Year of construction: 2024, condition: excellent (used), functionality: fully functional, The rotator can also be hired (also as a trial hire) Maximum load: 25t per set, consisting of 1x drive unit and 1x travelling unit Workpiece diameter: 300 - 4,000 mm Rotation speed: 120 - 2,200 mm/min Wheel material: Polyurethane Control: Manual control bulb on 5m cable Further possible options are e.g: Foot pedal, steel roller material, additional idler units Blsdpowuyzksfx Abbsr

Condition: good (used), Duty cycle: 40 °C:60 % / 550 A : 100 % / 430 A Wire speed: 5 m/min - 25 m/min :19.685 ipm - 984.253 ipm Bledpfx Abjmv D Daebjr Coil loading ex works:1,0-1,2 mm UNI / steel Spool diameter: D200 / D300 Torch connection: Euro central connection Safety marking: CE mark / EAC mark Dimensions (L x W x H): 660 mm x 280 mm x 380 mm Weight:15.5 kg Standards: IEC 60974-1, -5, -10

Year of construction: 1988, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Blodswfg Ewepfx Abber

Year of construction: 2012, condition: good (used), 60t turning roll, roller bed with polyurethane wheels. turning speed: 60-1.200 mm/min workpiece diameter: 600-7.500 mm availible also for renting Blsdjfvhp Hepfx Abbor

Year of construction: 1999, condition: ready for operation (used), Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible. Blsdpfouui Ecox Abbjr

Year of construction: 2020, condition: like new (used), functionality: fully functional, Turntable / Positioner with hydraulic height adjustment max load 800 kg turning speed 0,07-1,6 rpm faceplate 650mm diameter Bedpfsfrlqcsx Abbslr lifting range with horizontal faceplate: 693-1351 mm

Year of construction: 2019, condition: ready for operation (used), A Peddinghaus cutting and notching system for mitre cutting and weld bevel preparation is available. The main component of the system is the CNC 5-axis notching machine Peddinghaus SACM-1250/A, year of manufacture: 2019. The system is suitable for small to medium-sized steel construction. Intended use: Standard notching, flange thinning, web openings and other common notching shapes. Documentation available. On-site inspection is possible. Bedpfxewgngls Abbjlr

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, welding rotator for max. load 1t polyurethane wheels 50,0 mm x 200mmØ workpiece diameter 20 - 800 mm speed-range 80 - 1.600 mm/min foot-pedal Bodpfxswuzc Ao Abbelr availible also for renting

Year of construction: 2018, condition: ready for operation (used), Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible. Bsdpfx Aou Izq Ssbbelr

Year of construction: 2023, condition: like new (used), functionality: fully functional, positioner for 6t load speed: 0,03-0,6 rpm motorized tilting Bljdpfxegl Ndmj Abbor faceplate diameter 1.600mm availible also for renting

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Bedpfjwmqwysx Abbjlr

Year of construction: 2024, condition: new, functionality: fully functional, maximum load weight: 1,200 kg, faceplate diameter: 650 mm, height adjustment type: hydraulic, welding current at 100% duty cycle: 300 A, The positioner can also be hired (also as a trial hire) Maximum load: 1.2 tonnes Rotation speed: infinitely variable approx. 0.07 - 1.6 rpm Face plate size: 650 mm diameter with T-slots Bsdpsrkmngjfx Abbolr Faceplate height (horizontal): 711-1,060 mm Hydraulically height-adjustable for more ergonomic working Control: wired manual control bulb and foot switch Subject to prior sale and hire

Condition: ready for operation (used), Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible. Bodpfx Absu N Hc Aobjlr

Year of construction: 2011, condition: good (used), 1 used, well-preserved welding rotators, tank turning rolls designed for a load of 300 tonnes, consisting of 1 driven unit 1 idler unit with the following technical data: Type : PR 3000 SB total load : 300t Load per unit : 150t Roller diameter/width : 850 x 250 mm; Roller material : steel Roller centre height : 778 mm from lower edge of machine frame Rotation speed : 65-1,230 mm/min continuously adjustable Support diameter : 1.000-9.000m electrics : switch cabinet permanently attached to the machine frame of the drive unit Control : wired remote control Supply voltage : 380/400 V, 3Ph, 50 Hz The system is also available for hire (trial hire) Bljdpfx Aofn Hmzebbor

Year of construction: 2006, condition: ready for operation (used), A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible. Bodpfsviv Dlex Abbslr

Year of construction: 2023, condition: new, functionality: fully functional, welding turntable, max. load 5t, speedrange 0,03 – 0,6 rpm Table diameter: 1.600mm Blsdsf Dx T Tspfx Abbjr

Year of construction: 2011, condition: ready for operation (used), A Prima Power CO2 laser cutting system is available. 1) Prima Power Platino 1530, year of manufacture: 2011, travel X/Y/Z: 3000mm/1500mm/150mm, rapid traverse: 100m/min, position accuracy: 0.03mm. 2) Prima Power CP 3000, year of manufacture: 2010, laser power: 3000W, power stability: +/- 2%, wavelength: 10.6µm, laser diameter: 19mm, dimensions X/Y/Z: approx. 900mm/3100mm/900mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Available from Q1 2025. Blsdpet Nhm Ijfx Abbjr

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, welding turntable for max load 20t faceplate diameter: 2.45 turning speed: 0,02-0,4rpm height: 690mm Availible also for renting Blodpfx Aem Dr S Njbbor

Condition: ready for operation (used), A PlymoVent welding fume extraction system is available. Compressed air tank volume: 11l, compressed air quality: class 6, operating pressure: 4bar-5bar, compressed air consumption per pulse: 40nl-50nl. Documentation available. On-site inspection is possible. Blsdevgfftepfx Abbsr

Year of construction: 2021, condition: new, functionality: fully functional, faceplate diameter: 800 mm, welding turntable, max. load 1,2t, speedrange 0,1 – 2,0 rpm Table diameter: 800mm Blsdpfx Abeqzia Isbor

Year of construction: 2015, condition: ready for operation (used), A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible. Bledpfx Asw Azu Ijbbor

Year of construction: 2017, condition: as good as new (ex-display), turning roll for 1t wheel dimensions 200x80mm turning speed 141-1430mm/min - foot pedal Bljdpfxsfrlp Ae Abber availible for renting

Condition: ready for operation (used), Year of construction: 2012, Laser power: 4000W (4kW), wavelength: 1030nm, beam quality (BPP): 8mm/mrad, beam diameter setting: 0.1µm, machine dimensions X/Y/Z: approx. 1000mm/1600mm/1600mm, weight: approx. 1000kg. Including 2x scanner optics (PFO) for the process cells, 3x fiber optic cables and spare parts. Documentation available. On-site inspection is possible. Bodpfjwwll Hex Abbjlr

Year of construction: 2006, condition: ready for operation (used), A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible. Bledpswqqwbsfx Abbjr

Year of construction: 2017, condition: ready for operation (used), Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Bedpfx Asvyiqgobbjlr