Used other metal presses for sale (151)

Condition: used, TECHNICAL DETAILS - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] SUPPLY - Supply voltage : 3x400 [VAC] - Frequency : 50 [Hz] - Rated current : 5.5 [A] - Installed power : 2 [kW] FLOOR SPACE - Floor dimensions : 1200 x 1200 [mm] Fjdjuhai Ropfx Ab Aegg - Machine height : 2200 [mm] - Machine weight : 550 [kg] MACHINE HOURS - Working hours : 1070 [h]

Condition: used, TECHNICAL DETAILS - Cutting strength : 1700 [daN] - Max. slide travel : 75 [mm] - Max. approach speed : 315 [mm/s] Fgsdpfeuhai Dex Ab Asg - Slide stopping time : 50 [ms] LOWER EXTRACTOR - Diameter : 16 [mm] SUPPLY - Supply voltage : 3x400 [VAC] - Frequency : 50 [Hz] - Rated current : 5.5 [A] - Installed power : 2 [kW] FLOOR SPACE - Floor dimensions : 1300 x 1100 [mm] - Machine height : 1900 [mm] - Machine weight : 575 [kg] MACHINE HOURS - Working hours : 669 [h]

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Fgedowndnuepfx Ab Ajg Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: good (used), Year of construction: 1973, functionality: fully functional, overall weight: 4,500 kg, total length: 2,000 mm, total width: 1,500 mm, total height: 3,000 mm, power: 30 kW (40.79 HP), Overhaul in 2007 Fgjdpfx Aou Rn S Ijb Ajg Filling height 140 mm Strokes per minute 8.0 - 25.0 Top punch stroke 175 mm Upper punch adjustment 115 mm Top ram pre-spring 20 mm Total connected load 9 KW

Condition: good (used), Year of construction: 1971, functionality: fully functional, pressing force: 30 t, total length: 2,000 mm, total width: 1,500 mm, total height: 3,000 mm, overall weight: 4,500 kg, Overhaul 2005 Filling height 140 mm Strokes per minute 7.5 - 21.5 Top punch stroke 175 mm Top ram adjustment 115 mm Top ram pre-spring 20 mm Total connected load 15 KW Fjdpfju Rn Hxex Ab Aegg

Condition: used, TECHNICAL DETAILS - Force : 5 [kN] - Working stroke : 35 [mm] - Spindle height : 400 [mm] Fgsdpfx Asuhalleb Asg - Slide bore diameter : ø 10H7 [mm] - Angle : 95 [°] - Max. tool weight : 15/30 [N] - Table dimension : 110 x 80 [mm]

Year of construction: 1977, condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Fsdpfet Nhmhex Ab Ajgg

Year of construction: 1994, condition: ready for operation (used), Connected load: 12kW, length: 1770mm, width: 1250mm, height: 3700mm, weight: 13.2t, operational hours counter: 39,671h, with documentation, an inspection is possible. Fgodpfx Ajnxk I Rob Aeg

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Fgsdpfx Abjlmmwro Aog

Year of construction: 1993, condition: ready for operation (used), Max. working length: 2600mm, max. pressing force: 700kN, stroke: 8-60mm, connected load: 8kW, weight: 4.5t, with documentation. Fgodpfx Aopcgy Asb Aog

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Fodpfx Abeyq R D Hs Asgg

Condition: used, TECHNICAL DETAILS - See photos Fjdpfeuhaknox Ab Asgg

Condition: used, TECHNICAL DETAILS Fgedpfx Asuhakheb Aog - See photos

Condition: used, TECHNICAL DETAILS - As per photos Fsdeuhalfjpfx Ab Asgg

Year of construction: 1991, condition: ready for operation (used), A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible. Fjdew A R Spjpfx Ab Asgg

Condition: ready for operation (used), An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible. Fgedpowr Dwwofx Ab Aeg

Year of construction: 1998, condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Fgsdpfx Abowhp Nds Aeg

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Fodpfxsyzzh Es Ab Aogg Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: good (used), Year of construction: 1964, table height: 800 mm, Flanging and dishing machine GRAAF - HVP 300 Die height 1400 mm Ram size    400 mm Hydro pack 1800 x 1800 x 1200 capacity Kg: 300 Distance between column:1700mm Table Length: 1500mm Table Width: 1500mm Table Height: 800mm Ram stroke: 900mm Approche speed: 4000mm/min. Working speed: 3000mm/min. Return speed: 4000mm/min. Length: 2500mm Width: 1500mm Height: 3840mm Weight: 15000kg Fedpfxjwq Rugj Ab Ajgg

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Fjdpfx Absi Dx Sbs Ajgg

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Max. part diameter : 30 [mm] - Max. part thickness : 2 [mm] - Shocks per minute : 150 - Distance between mounts : 230 [mm] Fsdpfjuhag Aex Ab Aogg - Distance between table and slide : 148 [mm] - Table diameter : 220 [mm]

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] Fsdpfx Asuhahaeb Asgg - Max. part diameter : 30 [mm] - Max. part thickness : 2 [mm] - Shocks per minute : 150 - Distance between mounts : 230 [mm] - Distance between table and slide : 148 [mm] - Table diameter : 220 [mm]

Condition: used, TECHNICAL DETAILS Same as on photos Fodpfxsuhaiqo Ab Asgg

Condition: used, TECHNICAL DETAILS Fgjdpouhaiwsfx Ab Asg Same as on photos

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] Fsdpfx Absuhag Nj Aogg - Max. part diameter : 30 [mm] - Max. thickness : 2 [mm] - Shocks per minute : 150 [H/min] - Distance between mounts : 230 [mm] - Distance between table and slide : 148 [mm] - Table diameter : 220 [mm]