Used other measuring & testing equipment for sale (160)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. Kodpfx Aoxqxt Ijnwjdn The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts Kjdpoyu Nabefx Anwjdn • Research / hobbyists The optical condition is good for its age.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Scratch testing device for characterizing the adhesion and scratch resistance of thin coatings and bulk materials The scratch testing method involves scoring the surface with a diamond tip under a constant or progressive load. During the scratch process, the specimen moves under the video system to examine the various types of damages caused by the tip and correlate them with the applied load. Kdedoytrufspfx Anwsn The images can be digitized and precisely mapped onto emission, acoustic, and load diagrams. This standard procedure enables the comparison of different coatings, substrates, coating thicknesses, surface preparations, and the scratch resistance of bulk materials. Features include an acoustic emission sensor, multi-pass scratch function (repeated scratching along the same track), friction force measurement, and the 2018 upgrade: new illumination system with analyzer, polarizer, 2 apertures and filters, plus high-resolution INFINITY 5X and 20X objectives, and lens holder with adjustment screws for easy tip/microscope calibration. Includes calibration set for table speed and applied load sensor.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The bidirectional constant current source is designed for battery cycling and can apply or measure voltages from 0 to 20 V and apply or measure currents up to 3 A. The constant current source can operate as a current source (positive current) or as a load (negative current). LAN and USB are available as interfaces. The device was supplied with various additional functions. The NGM-K103 Digital Trigger I/O option enables the connection of the device to external measuring devices, and the NGM-K104 DVM option enables the use of an independent digital voltmeter. With the NGM-K106 Battery Simulation option, the constant current source can simulate the currents and voltages of a battery. Bidirectional power supply, max. voltage 20 V, max. current 3 A, 60 W power, interfaces: LAN and USB, available options: NGM-K103 Digital Trigger I/O, NGM-K104 DVM option, NGM-K106 Battery Simulation Kodpfx Anoytrnfewjdn Includes power cable, USB cable.

Year of construction: 2012, condition: repair required (used), functionality: limited functionality, Fully automated test bench for testing fuel cell components Max. output 500 W (max. current: 100A, max. voltage: 35V) Gases can be temperature-controlled, humidified and pressurized; nitrogen purging available Anode: 0.04-2 Nl/min hydrogen, cathode: 0.1-5 Nl/min air or 0.02-1 Nl/min oxygen Includes power cable, proprietary Testwork® software from the manufacturer, measurement PC Kodpfx Asytr R Hjnwedn Central control unit (PLC) defective

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 100 kg, total width: 320 mm, total length: 640 mm, total height: 540 mm, Axioplan 2 Imaging, a universal all-in-one solution adaptable to any application. A flexible, future-oriented microscope system, controllable via computer or manually, capable of digital image capture and storage, and able to communicate with other systems – truly a digital microscope from A to Z. Eight filter positions with a full 25 mm field of view, easily accessible in a compact reflector turret: This means top performance without compromise and offers space for a wide range of filter combinations, Optovar modules, multi-channel fluorescence, and a DIC analyzer. Kdedpfxeytr Aco Anwjn Includes attachment for the AXIOPLAN photomicroscope.

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, - Compact tabletop model with user-friendly, parallel upward-opening door - Double-walled housing with blower cooling, low external surface temperature - Furnace insulation made of low thermal mass alumina material, allowing for rapid heating and cooling - High-quality heating elements made from molybdenum disilicide (MoSi2) Kedpfx Aeytr Ekjnwsdn - Low power requirements - Heating elements controlled via thyristors, ensuring extremely precise furnace control; wear-free and silent operation - High temperature accuracy inside the furnace chamber - Exhaust vent in the furnace ceiling Incl. PC: HP Compaq dx2300 Microtower Dx2300M/E2160/160hnd/1024L/4rf, Dual Core with Microsoft XP + DVD drive + 19" Philips monitor Model ID: 190B4CS/00 (Company: Bechtle, Heilbronn 26.09.2003 net €528 Inventory No. 5633) with Eurotherms iTools with Wizards pre-installed and on DVD, all necessary cables, keyboard, Logitech wireless mouse

Year of construction: 2023, condition: good (used), functionality: unexamined, machine/vehicle number: SRV54341, Ladies and Gentlemen, We are selling the Hitachi FT230 XRF analyzer described and photographed here. Excerpt from the manufacturer: Kodpsuwkr Djfx Anwjdn Each individual element of the FT200 series has been developed to drastically reduce the analysis time. Automated focusing reduces sample loading time Intelligent recognition with the Find My Part™ function automatically sets up the complete measurement routine Sample view is displayed over a large part of the screen for excellent visibility Self-diagnostics confirm the condition and stability of the device Seamless integration with other software and easy data export Intuitive and easy to use thanks to a new user interface Powerful: simultaneous measurement of up to four layers and substrates Designed for demanding production or laboratory environments Complies with ASTM B568 and DIN ISO 3497 standards Supports you in meeting the specifications for ENIG (IPC-4552B), ENEPIG (IPC-4556), Immersion Sn (IPC-4554) and Immersion Ag (IPC-4553A) Further information: Detector: Silicon Drift Detector (SDD) Element range: Al (13) - U (92) Stage travel: 250 x 200 mm Motorized Z-axis movement: 205 mm Maximum sample size: 500 x 400 x 150 mm Laser focus: Standard Coating thickness analysis: possible RoHS screening: possible Further information and images of the machine are available on request. Disclaimer The machines offered are sold "as is" and "without warranty". Any express or implied warranties, including, but not limited to, warranties of merchantability or fitness for a particular purpose, are hereby expressly disclaimed. Seller assumes no responsibility for the operability, reliability or accuracy of the machine. It is the buyer's responsibility to thoroughly inspect the machine prior to purchase and ensure that it meets his requirements. Any descriptions or specifications of the machine are for information purposes only and may contain inaccuracies or errors. The seller shall not be liable for any such inaccuracies or errors and assumes no obligation to update or correct such information. Buyer agrees that Seller shall not be liable for any damages or losses arising directly or indirectly from the purchase, use or inability to use the machine, including, but not limited to, lost profits, business interruption or consequential damages. Any repairs or modifications to the machine after purchase are the sole responsibility of the buyer. Seller shall not be liable for damages caused by improper repairs or modifications. By purchasing the machine, the buyer expressly agrees to the terms of this disclaimer and waives any claims against the seller in connection with the purchase or use of the machine.

Year of construction: 2008, condition: good (used), functionality: fully functional, Scanworks V5 laser scanner with interface to Hexagon Cimcore/Romer measuring arms. We used to operate it with a Romer V7 measuring arm and no longer need it. Kdsdpfx Aewfgpconwon Scanworks V5.7 64-bit point cloud acquisition software is included. Complete package with controller, laser, calibration sphere, cables, certificates, and software. Ideal as a replacement for existing systems to ensure reliability.

Condition: good (used), functionality: fully functional, Explosion-proof voltmeter from Amptec, type 620EXV. Ksdezfxq Aspfx Anwjdn Unit with Peli case including charger and test cable (without test cable, €1,500).

Condition: used, Suitable for measuring all types of milling and drilling tools, profiles, punching tools, drive and cardan shafts, profile rollers, etc. Accessories: Measuring table adjustment with digital display Screen diameter: 500 mm Enlargement: 50 and 100 times Swivel range of the upper table: +/- 2 mm Connected load approx.: 230 V / 50 Hz Dimensions W x D x H approx.: 1200 x 700 x 1800 mm Weight approx.: 400 kg Kdsdpfx Answnnwgowjn colour: Light grey

Year of construction: 2021, condition: ready for operation (used), An automatic Lorenz filter test station for the automatic testing of filter media, half masks, canister filters, and medical face masks is available. Standards: EN143/EN149/EN14683/ISO16900-3 and more, module components: flow meter/photometer upstream and downstream of the test specimen/aerosol generator/suction and extraction unit, aerosols: paraffin oil/Emery oil/DOP/DEHS, volume flow range: 8L-300L/min, min. separation efficiency measuring range: 0.0001%, min. breathing resistance measuring range: 5Pa-1000Pa, max. filter air velocity: 10.2cm/s, max. test area: 237.8cm³. The device has been used little and would not need to be serviced. Documentation available. An on-site inspection is possible. The image is an example. Kdodpfx Anjy Tx Slowon

Condition: excellent (used), functionality: fully functional, We offer this solid granite plate for sale as a surface plate or for similar purposes. Transportation can be arranged or handled for an additional fee. Self-collection is possible at any time. Kdedpfoymmckox Anwjn

Condition: excellent (used), For sale: professional MAGNAFLUX UVM3059 UV-A radiation intensity meter – used for NDT inspections (non-destructive testing, penetrant testing, fluorescent inspection, etc.). The device is in very good technical and visual condition, ready for immediate use. • Model: UVM3059 • Manufacturer: MAGNAFLUX GmbH • Power supply: 9 V • Measurement range: 0.5 – 99.9 W/m² • Serial number: 381 • Calibration date: 14/08/2023 • Next inspection due: 2024 • Set includes: original transport case, foam protection, sensor, documentation on the housing The device is fully functional, the display works correctly, and the sensor responds properly to UV-A radiation. Ready for use in laboratory, workshop, production, or quality control. Kjdpoxlub Dofx Anwodn

Condition: excellent (used), Professional Fluke DS703 FC diagnostic videoscope for visual inspection of hard-to-reach areas, maintenance, service, and energy sector applications. The FC (Fluke Connect) version enables wireless transmission of images and data. Kdodpfx Anoyc Ru Aswjn Key features: • Large, clear high-resolution LCD screen • Adjustable LED probe lighting – provides clear images in dark spaces • Fluke Connect (FC) – save, share, and archive inspection results • Intuitive operation, robust industrial-grade housing • Image/video recording functions (for inspection and reporting purposes) Set (as shown in the photos): • Fluke DS703 FC main unit • Inspection probe • Original Fluke case / carrying case • Cables / accessories as visible in the photos • Manuals / software media (if shown) Condition: • Very good (complete, well-maintained equipment) • Fully functional and ready for operation • Offered exactly as configured in the photos Applications: • Maintenance (mechanical, electrical, energy sector) • Manufacturing industry, automotive • Inspection of machinery, installations, ducts, enclosures • Technical service and diagnostics

Condition: used, Professional granite surface plate – renowned quality by Mitutoyo / Planolith (Made in Germany). Ideal for use in quality control, tool shops, and metrology. ⸻ Specifications: • Plate dimensions: approx. 1200 x 800 mm • Thickness: approx. 170 mm • Weight: approx. 460 kg • Accuracy class: DIN 876/0 (high precision) • Permissible deviation: 0.009 mm • Actual deviation: 0.00273 mm • Manufacturer: Planolith GmbH / Mitutoyo • Country of manufacture: Germany • Includes: solid steel stand ⸻ Advantages: Very high measurement accuracy Stable construction – heavy granite dampens vibrations Ideal for measurements, marking out, and component inspection Professional equipment Ready for use ⸻ Kjdpfjyw Ubqox Anwedn Condition: Used item – shows normal signs of wear (scratches visible on the surface), but is fully functional and maintains its specification parameters.

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service Kdodpfx Asywcr Donwjn ⸻ CONDITION used visually in good condition

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Kedpfjywcrwjx Anwodn Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Ksdsxl Rgiopfx Anwedn

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Ksdpfx Ajxl Rf Sjnwjdn

Condition: used, Leakage tester/ventilation duct leakage tester Make Airflow UK Kjdpfxecxb Hao Anwedn Type LM 1 Serial number 125674 4 meter hose 230 Volt Documents available

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Ksdpfx Asy Sl Uqsnwjdn Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Kdjdpfx Ansytr Swowon Dismantling by buyer.

Year of construction: 1990, condition: good (used), Offer 26136 Technical data: (non-binding) Kdjdpfxsy Nldge Anwsn - Test panel for wall mounting with various testing devices - Required space: W 600 x H 750 x D 300 mm - Weight: 40 kg

Condition: used, Designation: Vibration Test System Manufacturer: Data Physics Model: LE-1216-3VH Force Rating: Sine (5 - 2000 Hz) Random (20 - 2000 Hz) 12000 lbf (53.4 kN) vector 12000 lbf (53.4 kN) rms Frequency Range Full Force Reduced Force Level 5 to 3000 Hz 2500 to 3000 Hz Maximum Displacement (Peak-Peak): Rated Stroke Limit Shock/Bump Continuous or Random Electrical Overtravel Limit Between Mechanical Stops 3.0 in (76 mm) 2.5 in (63.5 mm) 3.1 in (79 mm) 3.2 in (81 mm) Maximum Velocity 71 in/s (1.8 m/s) Ksdpfx Ansy Rqiwswedn Maximum Acceleration Sine 100 g vector, 5 to 2500 Hz Random 50 g rms, 20 to 2000 Hz Fundamental Resonance Frequency (Bare Table) 2050 Hz (nom.) Body Suspension Natural Frequency — Thrust Axis: - Vertical: 2 Hz - Horizontal: Below 2 Hz Blower Power (Full Load): 20 Hp, 20 kW; 230/460 V, 3-phase, 60 Hz Alternate Power: 20 Hp, 20 kW; 208/400 V, 3-phase, 50 Hz Air Pressure: Air Spring: - Vertical: 90-100 psig (621-690 kPa) - Horizontal: 2-5 psig (14-34 kPa) Field Specifications: - Rated Current (dc): 64 A - Maximum Voltage (dc): 240 V - Field Resistance at 20°C: 3.2 ohm Stray Flux Density with degauss coil: < 14 gauss at 12 in (304 mm) above table Field Protection: - Rated degauss coil current: 2.6 A (Nominal) - Maximum degauss coil voltage: 120 V Weight: 1216-3VH: 8000 lbs (3636 kg) Power Amplifier Model: DSA10-80 Item condition: Used item as shown in pictures Armature newly rewound Slip table / 40 mm grid M8 760 x 760 Armature bolt circles 8" / 16" M10 Please contact us if you have any questions. Shipping: The quoted shipping costs apply to deliveries within Germany. Worldwide shipping (please inquire for shipping costs outside of Germany). Sale only to commercial customers, without warranty or guarantee. Deviations from technical data and errors in the description of the items may occur and are subject to change.