Used working platform semitrailers for sale (73)

Condition: new, maximum load weight: 36,245 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the specifications. Full equipment details available upon request. Loading Area: * Loading platform with hardwood floor and approx. 1,000 mm x 8° rear bevel * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of fold-out external lashing rings (LC 5,000 daN) * 2 pairs of fold-out external lashing rings (LC 10,000 daN) * Cutouts in the outer frame for securing straps (LC 2,000 daN) Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW air-suspended axles * Disc brakes (approx. 377 mm) * Raise/lower function (ET 120) * Axle tools Psdpfow Tpqqjx Ag Djgw Tyres: * Tyres 435/50 R 19.5 – brand at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit via standardised EBS interface as per ISO 11992. The tractor unit must be able to transmit and display this data for correct functionality. Brake System: * Wabco braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor Steel Construction: * High-strength fine-grain steel frame construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system compliant with EU regulations * Lighting: 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection panel with sockets: 24N, 24S & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal adhesion of the coating system * Complete vehicle chassis metallised with ZINACOR 850 (85% zinc / 15% aluminium) for best possible corrosion protection * Final painting with two coats of 2K topcoat, single colour, RAL 3002 Carmine Red according to RAL 841GL * Rear section metallised and painted RAL 9010 (Pure White) * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint not possible Including the following additional equipment: * Yellow-red air couplings on galvanised front connector strip * 4 wheel chocks with holder * 2-inch king pin * Loading platform with heavy-duty hardwood floor * 1 spare wheel carrier under the loading platform, right in driving direction * Galvanised folding supports under the rear loading platform bevel * 9 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * 1 galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Central beam with painted sand layer for anti-slip protection * 1 stainless steel toolbox (INOX), crosswise under the loading platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container locks in the loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container * 3 pairs of transverse stake pocket strips mounted in the platform, for plug-in stakes approx. 100 x 50 mm * Holder for up to 9 pairs of plug-in stakes, approx. 100 x 50 mm, bolted inside the front wall * 2 stainless steel (INOX) toolboxes under the loading platform left and right, approx. 600 x 350 x 600 mm * Holder for aluminium drive-on ramps, crosswise under the loading platform, behind the axles

Condition: used, maximum load weight: 34,240 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2022, next inspection (TÜV): 11/2025, loading space length: 13,650 mm, loading space width: 2,550 mm, total width: 2,550 mm, Year of construction: 2022, Equipment: ABS, 3-axle flatbed semi-trailer FLIEGL Type SDS 390 First registration: 11/2022 German registration, one owner Gross weight: 39,000 kg Unladen weight: 4,760 kg Fifth wheel load: 12,000 kg Platform length: 13,650 mm Coupling height: 1,150–1,200 mm Full-load landing gear, 2-speed Plastic toolbox: 650 x 520 x 670 mm 2x additional LED reversing lights Floor: 30 mm anti-slip plywood, forklift axle load up to 7,100 kg Reinforced front wall, 1,950 mm high, high-volume design Outer frame slightly sloped, new 'Load-Lock' version for lashing strap attachment SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE KNORR trailer EBS with RSS vehicle stability system Podpfxsxd I Uzj Ag Djgw Tires: 6 x 385/65 R 22.5, tread depth 90% RENTING is the new BUYING — Full-service rental available immediately with us.

Condition: used, maximum load weight: 24,590 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 06/2010, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 700 mm, total width: 2,550 mm, total height: 2,750 mm, Equipment: ABS, ABS, EBS, BPW EcoPlus axle(s), last axle steered, TRIDEC steering, disc brake system, air suspension with lifting and lowering device, lift axle, screen-printed floor, 6 x stake pocket rail(s) in the middle of the loading area, continuous lashing holes in the outer frame, 2x storage box, vehicle can be covered with advertising and/or labeled Pgodpfovnm Nisx Ag Djw Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 06/2008, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller platform semi-trailer | BPW axles with disc brakes | Year of manufacture: 2008 | Spare wheel holder | Pallet box | Toolbox | Tyres: 385/65 R22.5 | Subject to errors, input mistakes, and prior sale. Podpsxx Nlwofx Ag Degw

Condition: used, maximum load weight: 33,900 kg, overall weight: 39,000 kg, first registration: 09/2005, total width: 2,550 mm, total height: 2,770 mm, Equipment: ABS, Air brake, drum brake, BPW axles, wooden floor, used vehicle Vehicle no. 3244, air brake ALB/ABV, 3x tool box, side underrun protection left + right, unladen weight: 5,100 kg, gross weight: 39,000 kg, BPW axles with drum brakes, Alcoa aluminium rims, tyre size: 385/55R 22.5, wooden cargo floor, container mounts, stake pockets, cargo area dimensions LxW: 13,520 x 2,550 mm. For enquiries please... Subject to errors and prior sale. Podpfx Aexxwdhjg Degw

Condition: new, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, total height: 1,300 mm, Equipment: ABS, NEW VEHICLE Kässbohrer extendable platform SPA X3 Delivery time: approx. 4 months after order placement! # Fifth wheel load: 18,000 kg # Saddle height: 1,150 mm # Extendable by 3,500 mm Axles / Braking system: # BPW axles with 22.5" disc brakes # 3rd axle is a self-steering trailing axle # 1st axle is a lift axle # WABCO braking system 4S/3M # 6 branded tires 385/65/22.5" on steel rims # Jost landing legs 24t # Electrical connections: 2 x 7-pin and 1 x 15-pin # 24V Aspöck lighting system # 2 plastic wheel chocks Equipment: # Non-removable sliding table, 300 mm long # 30 mm hardwood floor # Oversize equipment (4x galvanized oversize panels with LEDs + 1x rotating beacon) # Stainless steel toolbox 1,000 mm x 500 mm x 500 mm, mounted on the right in the direction of travel # 6x2 retractable container locks # Stake holders mounted under the chassis + 18 stakes 100 mm x 50 mm # 6 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 lashing rings 13.4t, 8 x 2 lashing rings 8t, 108 lashing points on the outer frame, each rated at 2t # Front wall 1,500 mm high with Code XL certificate! # Chassis KTL-coated and painted RAL 3020 traffic red Pgodpjrvf Dkjfx Ag Djw # Front wall RAL 3020 traffic red ----Subject to errors, modifications, and prior sale! Location: KTH-Trailer GmbH in Goch

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including vehicles available for immediate delivery and short-term notice, on our website. Extract from the equipment list. Complete specification available upon request. Cargo Area: * Cargo area with approx. 30 mm thick hardwood floor * 8 pairs of lashing rings foldable outwards (LC 10,000 daN) Landing Gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 385/65 R 22.5 * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck takes place via the standardised EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display these data. Axles and Suspension: * BPW axles, technical capacity per axle 10,000 kg * 1st and 3rd axles hydro-mechanically steered, mounted on turntable, 2nd axle fixed * Air suspension with lift/lower valve * Axle tool Brake System: * Wabco brake system in accordance with EU regulations with EBS-E (4S3M) without interconnecting lines to the tractor unit Electrical System: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin ISO sockets * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned with shot blasting machine after welding * Second blasting with corundum for optimum coating adhesion * Final painting with 2 coats of 2K topcoat, single colour in RAL 3002 Carmine Red according to RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver * Paint system tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch kingpin * One galvanised steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanised front connection rail * 4 wheel chocks with holder on the front wall * Storage for approx. 1,000 mm stake pockets in the central beam at the rear * At the gooseneck and rear panel, left and right, one bracket each for warning signs incl. socket * Yellow reflector tape according to EU regulations on the side and rear of the trailer * 10 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the platform * European reflector boards (Red-Yellow) at the rear of the trailer * One holder for a rotating beacon at the rear of the trailer * One mudflap at the rear of the trailer * Manual and description on USB stick * 80 km/h speed stickers at the rear and on both sides * Electro-hydraulic power unit * 1 shunting coupling bolted with reinforcement to the end traverse * Axle load gauge to determine axle load including load diagram * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard * Remote steering from front and rear via cable remote control with push buttons, with axle alignment control (without installation in the tractor unit) * 7 pairs of galvanised plug-in stanchions approx. 100 x 50 mm, approx. 1,000 mm high * 4 pairs of stake pocket rails, mounted transversely in the platform for plug-in stanchions approx. 100 x 50 mm Psdpfoxl Nf Rox Ag Dogw * Spiral cable

Condition: used, maximum load weight: 29,440 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2012, next inspection (TÜV): 05/2026, loading space length: 13,500 mm, loading space width: 2,450 mm, total width: 2,550 mm, Year of construction: 2012, Equipment: ABS, KRONE SD FLATBED BPW WINCHES----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST ----VEHICLE EQUIPMENT ----VEHICLE DATA * TRAILER: FLATBED * AXLES: 3-AXLE * AXLE MANUFACTURER: BPW * SUSPENSION: FULL AIR SUSPENSION * BRAKES: DISC BRAKES ----EQUIPMENT Pgjdsxtr Uqepfx Ag Dew * TOOLBOX: 2X * STORAGE FOR STAKES: AVAILABLE * WINCHES: 12X (6 PER SIDE) ----TYRES * TYRES: 385/55 R22.5 (ALL) ----DIMENSIONS * LOADING LENGTH: 13.5 M * LOADING WIDTH: 2.45 M * FRONT HEIGHT: APPROX. 2.6 M ----* EXPORT SALES ONLY WITH DEPOSIT (MIN. 500€ - 2,000€) * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2,000€ ----EXPORT DECLARATION CUSTOMS EXW IN 10 MINS (AUTHORISED EXPORTER) 5 DAY, 15 DAY, 30 DAY PLATES AND 15 DAY AUSTRIAN PLATES EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID A deposit of at least €500.00 / €1,000.00 will be charged for sales to EU & third countries Changes, errors and prior sale excepted! You can find more vehicles on our website Sales are made exclusively according to our terms & conditions – see homepage Important notice – Important information: Despite careful verification of all details in our offer, errors can occur. Some of these may be due to transmission errors from the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for contract initiation. The details provided here are without guarantee and do not represent guaranteed characteristics.

Condition: used, maximum load weight: 33,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2014, next inspection (TÜV): 02/2026, loading space length: 13,620 mm, loading space width: 2,445 mm, loading space height: 1,200 mm, total width: 2,550 mm, total height: 2,318 mm, Equipment: ABS, Platform structure, container locks for 2x 20?, 1x 30?, 1x 40 foot containers, screen-printed floor, continuous lashing holes in the outer frame, 10 stake pockets on each side, 10 stake pockets in the middle of the loading area, stake depot under the chassis, extendable warning signs, support winch(s), mount for rotating beacon at the rear / and middle left, x storage box, EBS, ABS, BPW Eco Plus axle(s), disc brake system, air suspension with lifting and lowering device, lift axle, vehicle can be covered with advertising and/or labeled Pjdpfx Agexmqk Re Djgw Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, Year of construction: 2017, Technical details: Lifting height: 1200 mm lifting capacity in kg: 230 kg weight of the machine ca.: 0,48 t dimensions L x W x H: 2,8 x 1,0 x 2,0 m Column lift, sectional steel construction, welded, movable. Podpfxeu Nk Ays Ag Degw -hydraulically operated -lifting category 3 -2 pieces lifting tines 1650 x 100 x 60mm, with rubber band support; locking clamp with screw clamp -floor height min./max.: 900/1020mm chassis with handrail, 2x2 wheels, 2x of them swiveling and with brake *

Condition: used, empty load weight: 6,560 kg, maximum load weight: 26,920 kg, overall weight: 33,500 kg, axle configuration: 3 axles, first registration: 05/2012, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller flatbed trailer | BPW axles with disc brakes | Year of manufacture: 2012 | Spare wheel holder | Toolbox | Tyres: 385/65 R22.5 | Subject to errors and prior sale. Podpsxtdq Refx Ag Dogw

Condition: used, maximum load weight: 10,540 kg, overall weight: 18,000 kg, axle configuration: 1 axle, first registration: 05/2009, next inspection (TÜV): 01/2025, loading space length: 11,000 mm, loading space width: 2,500 mm, Year of construction: 2009, Equipment: ABS, * Subject to error and prior sale * Viewing only by appointment * Last price inquiries will not be answered * WhatsApp inquiries will not be answered * No videos will be made Psdpfxowb Rwis Ag Dogw

Condition: used, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 06/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment. Complete equipment list available upon request. Loading Platform: * Gooseneck, approx. 4,100 mm long, with central beam * Loading platform in double-extendable design, approx. 9,400 mm long, with pneumatically operated locking mechanism * A fixed intermediate table, approx. 200 mm wide, is welded to the central beam * Supply lines are routed protected inside the extendable beams and automatically adapt to the respective loading platform length (exception: supply to the first locking mechanism) * For tractor units: 4 x 2 and 6 x 2 Axles and Suspension: * BPW axles and suspension, all axles hydro-mechanically force-steered, mounted on turntables * Technical air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF twin tyres * Brand of our choice. Load index 143/141J (144/144F) Psdow E A Egjpfx Ag Dogw Braking System: * WABCO EBS-E braking system according to EU regulations Metallisation: * Complete HRM metallisation (High Resistance Metallisation) * Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%) Painting: * 6-coat final treatment: Entire steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of adhesion primer. Final topcoat: 2 coats of 2-component acrylic paint, single colour, followed by cavity sealing with special wax * Trailer colour: RAL 3002 Carmine Red * Wheel rim colour: Silver grey * Lamp bracket colour: RAL 9010 Pure White Included Accessories: * Steel front wall, approx. 1,600 mm high, certified version according to EN12642:2016 XL. Max. load capacity: 20,000 daN * 4 pairs of recessed lashing rings in the gooseneck outer frame: the front 3 pairs fitted horizontally (LC 10,000 daN), rear pair fold-out to the outside (LC 10,000 daN) * 4 pairs of stake pockets set into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted at the rear in the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 2-inch kingpin * 4 wheel chocks with holders in front of the front wall * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B, static test bearing capacity approx. 50,000 kg * On gooseneck and loading platform, wooden flooring approx. 32 mm thick, framed in aluminium omega profiles * Large cross-section extension tube with a locking point every approx. 500 mm * Small cross-section extension tube with a locking point every approx. 1,000 mm, providing a locking interval of approx. 500 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the loading platform, fold-out to the outside: one pair before the last axle and one pair at the end crossmember of the trailer (LC 10,000 daN each), all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets set into the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 3 transverse stake pocket rails mounted in the loading platform floor for plug-in stakes approx. 100 x 50 mm * 1 spare wheel carrier under the loading area on the right-hand side (direction of travel) * 1 lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading area on the left (direction of travel) * Access ladder mounted on the right (direction of travel) * Last axle with air bellows venting activated by operating the parking brake * 3 kW electr

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment features. Full equipment list available upon request. Pgedowvzg Rjpfx Ag Dsw - Gooseneck, approx. 4,100 mm in length with central beam - Load platform with double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with raise and lower valve - Twin tires 235/75 R 17.5 3PMSF - WABCO braking system, EBS-E - 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connections on the tractor unit - 4 pairs of stake pockets integrated in the outer frame of the gooseneck, suitable for insertable stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets integrated in the outer frame of the loading area, suitable for insertable stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left-hand side in direction of travel - Remote steering control from front and rear using cable remote with push buttons, with axle tracking control, without installation in the tractor unit - 2 axle load gauges mounted on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse rows of stake pockets mounted in the floor of the loading area for insertable stakes approx. 100 x 50 mm - 1 transverse row of stake pockets mounted in the floor of the gooseneck for insertable stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox, mounted under the loading area - WADER container pockets in the loading area for transporting: 2x 20' containers or 1x 40' container - Central automatic lubrication system with 2 pumps, BEKAMAX brand - Complete HRM Metalization (High Resistance Metallisation)

Condition: used, maximum load weight: 37,535 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer Pjdpfx Agoxgk U No Dogw * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 38,080 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specifications available upon request. Loading Platform: * Extending loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden floor framed in omega profiles * 7 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Equipped with disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lift and lower valve * Axle tools Pgodpfxoxf Sifo Ag Dew Tyres: * Tyres: 385/65 R 22.5 Braking System: * Braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor Warning Signs: * Mountings on the gooseneck and rear panel left and right for warning signs, including socket Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin, connection according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel structure made of high-strength fine-grained steels * Steel grades S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class, durable corrosion protection for the standard grit-blasted welded frame, guaranteed by a two-component zinc dust primer * High-quality, single-colour two-component topcoat in RAL 3002 carmine red * Rims in silver, add-on parts as per manufacturer's choice * Rear section metallized and painted in RAL 9010 pure white Included Accessories: * 2-inch kingpin * 4 wheel chocks with brackets on the front wall * Remote steering, front and rear, cable-operated by push buttons, with single-track control of the axles (without installation in the tractor) * Manual and description on USB stick * Electro-hydraulic unit * Galvanized connection strip at front, yellow-red air couplings * Yellow reflective tape according to EU regulations on the sides, extension and rear of the trailer * European reflective panels (red-yellow) on the rear of the trailer * One mud flap at the rear of the trailer * Mounting for rotating beacon at the rear of the trailer * 10 pairs of pocket sockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform * 1 spare wheel holder under the platform on the right-hand side * Speed stickers 80 km/h on the rear and on both sides * Load manometer for determining axle loads including load chart * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the platform for: 1 x 20' container, 2 x 20' container or 1 x 40' container; an additional locking point is provided in the extension for a 45' container * 4 pairs of transverse stanchion strip pockets for plug-in stanchions approx. 100 x 50 mm * Storage for plug-in stanchions on the inside of the front wall * Access ladder installed on both left and right side in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the loading platform at the front left in the direction of travel * One add

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Complete specifications available upon request. Chassis: * Frame construction made of welded longitudinal beams and inserted cross beams * Underrun bar width approx. 700 mm * Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams * Maximum crossmember spacing 400 mm (for longitudinally laid floor) * 3.5-inch king pin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside * Technical saddle load 26,500 kg Landing Gear: * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension system with 10 t load capacity each Psdpfx Aswx Dctjg Djgw * Lifting and lowering device with 1 rotary slide valve Knorr/Wabco * Bracket for lifting and lowering device, bolted design Brakes: * Smartboard/TIM/Infocenter on bracket for lifting and lowering, in addition to the lift/lower valve * Without battery (operable only with towing vehicle) * Bracket for lights and brakes at the front of the underrun bar, total height approx. 700 mm * Basic version of tire pressure monitoring, connected to the EBS CAN bus system * With dual-release valve for brake and spring actuator * Test nipple for brake cylinder pressure at the front right brake cylinder * 1 coupling head each red and yellow * Lifting and lowering device mounted at the rear left (in the direction of travel) * EBS brake system by Wabco * EBS diagnostics via CAN bus (EBS plug), no external diagnostic cable provided! Tyres: * 8 x 445/65 R 22.5 - brand of our choice * Hub centering Lubrication: * Grease nipple strips on bogies and at the front of the steering system * No central lubrication Body: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of the front wall (facing rearwards), switch on lift/lower bracket * Heavy-duty front wall for platform * Side contour marking in yellow, rear in yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: * 2x LED work lights mounted in the lamp plate, switched via reverse gear * 2x LED work lights, switched via reverse gear, 1 each side near landing gear * 2x LED reversing lights, 1 per side in front of 1st axle * Lighting/wiring system brand of our choice * License plate illumination * The towing vehicle must provide sufficient power for the selected lighting (esp. reverse light) * Front position lights, lower, white, 1 each right and left (LED) * 24 Volt lighting system with large multifunctional lamp * Side marker lights (LED) flashing * 1 x 15-pin and 2 x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane departure lights (LED) Floor: * Hardwood floor approx. 28 mm, alternately with galvanized omega steel profiles Paint/Coating (no metallic colors): * Chassis painted in RAL 3002 flame red * Front wall (steel construction) painted in RAL 3002 flame red * Axle hubs in chassis color * Axles and landing gear in black * Wheels in aluminum/silver, similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted in RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates welded into the outer frame per side. Lashing load max. 3,000 daN * 12 per side

Condition: used, maximum load weight: 32,340 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2024, next inspection (TÜV): 07/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Chassis * Welded construction made from high-grade steel profiles with punched-through crossmembers, designed for high point loads Coupling Device * 2-inch kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * Compliant with EU regulations Landing Legs * 2 x 12 t landing legs with compensating foot and single-sided operation (right side in direction of travel) Axles * 3 x 9 t air suspension axle assembly * Disc brakes * Manufacturer: Gigant Brake System * Dual-circuit compressed air brake system compliant with EU regulations with EBS and RSS * Automatic load-dependent control * Spring-actuated cylinders for parking brake * Reversed polarity-safe coupling heads, permanently mounted on the front crossmember (no connecting line to tractor unit) * Manufacturer: Wabco Tyres * 6 units, 385/65 R22.5 160J on steel rims 11.75 x 22.5 ET 120 Mudguards * Compliant with EU regulations * PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier * 1 double basket incl. mounting material for one spare wheel with ET 120 Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * External frame with drilled holes every approx. 500 mm for tension belts Front Wall * Reinforced steel construction, fixed * Inside lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the external frame Lighting System * Compliant with EU regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights front (white) * LED outline lights at rear * Number plate lights * 1 x 15-pin and 2 x 7-pin plug connections on the front crossmember Paintwork * Chassis and front wall blast-cleaned, primed, and painted in a single color * Chassis: RAL 3002 carmine red * SSV: anodized aluminum * Underrun protection: white (RAL 9010) * Add-on parts: galvanized/KTL black * Rims: silver Pgodswbb Ufjpfx Ag Dew Additional Equipment * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stake pockets in the external frame, evenly distributed * 4 rows of stake pockets across the load floor * 20 pieces of stakes, galvanized tube 80/50, total length approx. 1,000 mm * Inside the front wall, a magazine for 20 plug-in stakes * 5 x 25 side and rear boards made of anodized aluminum hollow profiles, approx. 600 mm high, folding and removable * Removable Kinnegrip stakes * Sliding rails under the chassis left and right for side boards and stakes * Work light on lamp bracket (activated via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: used, maximum load weight: 32,610 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 11/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete selection of vehicles with immediately and short-term available units on our website. Sample from the equipment list. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with through-profile cross members, designed for high point loads. Coupling Device: * 2-inch king pin Underrun Protection: * Bolted version, compliant with EC regulations Side Impact Protection: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right hand side (FR) Axles: * 3 x 9 t air suspension axle assemblies * Disc brakes * Brand: Gigant Brake System: * Dual-line compressed air brake system compliant with EC regulations, equipped with EBS and RSS, automatic load-dependent control * Spring brake cylinders as parking brake * Foolproof coupling heads permanently mounted on front crossmember, without connection line to tractor unit Pgodpfxjwyhy Ee Ag Djw * Brand: Wabco Tyres: * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier: * 1 piece double basket with mounting hardware for one spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * Drill holes for tie-down straps approximately every 500 mm on the outer frame Front Wall: * Reinforced steel construction, fixed * Interior lined with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set in outer frame Lighting System: * EC compliant, 24 Volt, with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate lights * 1x 15-pin and 2x 7-pin plug connectors on front crossmember Paintwork: * Chassis and front wall sand-blasted, primed and painted in single color * Chassis: RAL 3002 carmine red * SSV: aluminium anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Wheels: silver Including Special Accessories: * First axle liftable with fully automatic, load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets crosswise to loading area * 20 stakes made of galvanized pipe 80/50, total length approx. 1,000 mm * Storage magazine for 20 plug-in stakes on inner front wall * Twistlocks for 1 x 40’ and 2 x 20’ containers, flush-mounted at the rear * Twistlocks for 1 x 20’ container in middle position * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. The following is an extract from the specification. Complete specification available on request. Chassis: Podpfx Aewx Dcasg Degw - Welded construction made of high-quality steel profiles with through-go crossmembers, designed for high point loads - Outer frame made of UNP steel Coupling equipment / fifth-wheel load: - 2-inch kingpin - Technically permissible fifth-wheel load: 26,500 kg Underrun protection: - According to EU regulations, bolted design Side impact protection: - According to EU regulations Landing legs: - Landing legs with single-side operation, support load approx. 66 t / lifting capacity approx. 24 t Axles: - 5 x 10 t air suspension axle units, make: SAF, with drum brakes approx. 400 x 200 mm - ABS - Wheel attachment, center-bored, 10-hole, offset ET 0 - Total air suspension stroke: approx. 200 mm, lift approx. 140 mm, lowering approx. 60 mm; control via rotary valve with detent function Steering: - 1 axle with leading steering, 2nd axle rigid, 3rd, 4th, and 5th axle with mechanical forced steering (Tridec) - Greasing points are routed centrally to the outside Axle lift: - First and second axle automatically liftable, with additional cut-off at the chassis Brake system: - Two-line pneumatic brake system according to EU regulations with EBS and RSS, automatic load-dependent control, make: Wabco 4S/3M - Spring-actuated cylinders as parking brake - Interlocked coupling heads mounted securely on the front crossmember, no connecting line to the towing vehicle - Aluminum air tank Tyres: - 10 x 445/65 R22.5 164J on rim 11.75 x 22.5 ET 0 – brand of our choice TPMS: - Tire pressure monitoring system - TPMS according to ECE R141, with data transmission to towing vehicle Fenders: - According to EU regulations: 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axle each front and rear with 1/4 PVC fender - Rear fender with mud flaps Load securing: - 5 pairs of folding lashing rings, evenly distributed (pulling force approx. 14 t) - 11 pairs of hook plates welded into the outer frame (pulling force approx. 3 t) - 10 pairs of lashing rings in the side outer frame, evenly distributed (pulling force approx. 8 t) Stake pockets: - 10 pairs of stake pockets set into the outer frame - 6 pairs of stake pockets set into the floor (at the outer longitudinal beam) Removable stakes: - 16 pieces galvanized plug-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stake magazine: - One magazine per side in front of the front wall, each for 8 plug-in stakes approx. 80/80 mm Front wall: - Bolted corner stakes filled with aluminum hollow profiles, inside with a steel collision plate across the entire width and height Floor: - Approx. 28 mm Z hardwood flooring, let into the outer frame, flush-mounted Lighting system: - According to EU regulations, 24 V with multi-chamber lamps - LED side marker lamps - LED position lamps white front - LED outline marker lamps rear - License plate lamps - 1x15 and 2x7-pin plug connections on the front crossmember Equipment: - Wheel chocks with double holder - Warning sign in accordance with ECE 70 - Work spotlight on lamp mounting (activated via reverse gear) - Holder for rotating beacon at the rear (incl. rotating beacon) - 1 piece climbing ladder mounted rigidly on each side left and right, incl. removable climbing aid - Smart Board - Sticker indicating vehicle swing-out - Sticker indicating load cen

Condition: new, maximum load weight: 32,340 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire inventory of vehicles, including those available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Chassis: * Welded construction using high-quality steel profiles with punched-through cross-members, designed for high point loads Coupling device: * 2-inch kingpin Landing gear: * 2 x 12 t landing legs with compensating foot and single-side operation on the right front side Axles: * 3 x 9 t air suspension axle units Pgedpowx Db Aefx Ag Dsw * Disc brakes * SAF brand, with disc brake approx. 430 x 45 mm * ABS * Centrally positioned wheel mounting, 10-hole with ET 120 * Total pneumatic suspension lift approx. 200 mm, of which approx. 140 mm raising and 60 mm lowering, controlled via rotary lever valve with detent Brake system: * Dual-circuit air pressure braking system according to EC standards with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Mistake-proofed coupling heads permanently mounted to the front cross member, with no connecting line to the towing vehicle Tyres: * 6 units, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice Mudguards: * According to EC, PVC mudguards in front of and behind the axle unit Spare wheel holder: * 1 double basket incl. mounting kit for one spare wheel with ET 120 Load securing: * 9 pairs of folding lashing rings, evenly distributed, pulling force approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, pulling force approx. 2.5 t * Outer frame with holes for tension straps approx. every 500 mm Front wall: * Reinforced steel construction, fixed * Interior lining approx. 9 mm birch plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed into outer frame Lighting system: * EC compliant, 24 volts with multi-chamber lights * LED side marker lights * LED position lights white at front * LED outline lights at rear * Number plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross member Equipment: * ECE 70 warning board * Bracket for rotating beacon (without beacon) Paintwork: * Chassis and front wall sandblasted, primed and painted in single color * Chassis: RAL 3002 (carmine red) * Sideboards: Anodized * Sideboard stanchions: RAL 3002 (carmine red) * SSV: Aluminum anodized * Hubs: KTL coated * Rear underrun guard: white (RAL 9010) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic load-dependent lift control * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets across the loading deck * 20 stanchions made of galvanized tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions mounted inside front wall * Sideboards: 5 x 25er sideboards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion rails for sideboards and stanchions left and right under the chassis * Container locks for 1 x 40' and 2 x 20' containers at rear flush, container locks for 1 x 20' container in center position * Work light on lamp bracket * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm * Air suspension Safety: ABS * EBS * Disc brakes Extras: Rental possible

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: Pgedpfjxttc Asx Ag Dow * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush Pedpfx Aeugqvfeg Dsgw * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment Pjdpfx Agew U H Sbs Dsgw * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: new, maximum load weight: 36,370 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our full vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from the equipment. Full equipment details available on request. Load area: - Load area made of hardwood floor with rear chamfer, approx. 1,000 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cut-outs in the outer frame of the load area for hooking in tie-down straps (LC 2,000 daN) Landing legs: - JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles, air-suspended, with disc brakes (approx. 377 mm), with lift/lower function (ET 120) - Axle tools Tyres: - Tyres 435/50 R 19.5 TPMS: - TPMS tyre pressure monitoring system according to ECE R 141 Data transfer to the truck is via the standardised EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data. Brake system: - Wabco braking system compliant with EU regulations, with EBS-E (2S2M) and without connection lines to the tractor unit Pgjdpfxjxq I Dve Ag Dsw Steel structure: - Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical system in accordance with EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted after welding with blast wheel machine - Second blast treatment with corundum for optimum coating adhesion - HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) for best corrosion protection - Final painting with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red according to RAL system 841GL - Rear section metallised and painted in RAL 9010 (Pure White) - Paint build-up tested in salt spray test in accordance with ISO 9227-NSS - Sealing of cavities with special wax - Metallic paintwork not possible Including the following additional equipment: - Yellow-red air couplings on the galvanised front connection strip - 4 wheel chocks with holder - 2-inch kingpin - Yellow reflector tape on the sides and rear of the trailer according to EU regulations - European reflector plates (red-yellow) on the rear of the trailer - Load area with heavy-duty hardwood floor - 1 spare wheel holder under the loading platform on the right side in the direction of travel - Galvanised drop-down supports under the chamfer of the loading area - 9 pairs of stanchion pockets for insertable stanchions, approx. 100 x 50 mm, in the outer frame of the loading area - One holder for a rotating beacon on the rear of the trailer - On the gooseneck and on the left and right rear panel, each with a bracket for warning signs including socket - One galvanised holder transversely under the loading area (approx. 2,400 x 640 x 165 mm) - One galvanised steel front wall (EN12642-XL), approx. 1,600 mm high - A layer of paint with sand on the central beam as anti-slip protection - 6 pairs of WADER container sockets fitted in the loading area, for 1x 20' container, 2x 20' containers or 1x 40' container - 3 pairs of transverse stanchion pocket rails moun