Used mounting technology for sale (154)

Condition: used, Year of construction: 2004, operating hours: 42,223 h, functionality: fully functional, machine/vehicle number: 264-L2038, input voltage: 400 V, Juki Corporation Pick-and-Place Machine, KE 2060 Model: KE2060 Condition: Used Technical Data: KE-2000 400V AC 50/60Hz 3kVA General Information: Flexible high-speed SMT pick-and-place machine / flexible chip mounter Year of manufacture: 2004 Iedpoycucqefx Aalohw Mfg. No.: 264-L2038 Operating hours: 42,223 Technical Specification: Applicable component height, base machine: 20mm (max.) Applicable board size: L size - 50 x 50mm (min) - 410 x 360mm (max) Applicable component size: Laser detection: 0603(0201) ~ 33.5 x 33.5mm Vision processing: 1.0 x 0.5mm ~ 74 x 74mm or 50 x 150mm Component placement speed: Chip: 12,500 CPH IC: 1,850 CPH Feeder inputs: max. 80 on 8mm T/F Laser head (;NLA) – left Laser/camera head (FMLA) – right BOC camera each on left and right PCB transport system Automatic nozzle change station 5 pcs. nozzle no. 500, 504 2 pcs. nozzle no. 505, 506, 507 1 nozzle no. 508 Touch panel display Portable control unit Feeder monitoring sensor Bad mark detection Signal tower with buzzer Accessories: Feeder cart Spare parts package Note on item condition: Cable break on the control unit side at the operator display

Condition: used, machine/vehicle number: SN: R050A-24E0011, I-PULSE F2 Feeder Isdpfjww Etwjx Aalshw F2-44mm___1 piece F2-32mm___2 pieces F2-24mm___4 pieces F2-16mm___5 pieces F2-12mm___6 pieces F2-84mm___39 pieces F2-82M_mm___6 pieces Feeder Stick____1 piece

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Nitrogen hood IR preheating Single soldering nozzle 3 solder frames Software, etc., manual Ihjdpfx Aaexzrflslew Tool, spare parts box New timing belt, new impeller for drive installed

Condition: excellent (used), Features: Large feeder capacity Simultaneous assembly of different products Modular machine concept allowing for easy upgrades Changeover with little to no downtime Specifications: Productivity Max placement speed/cycle time: 15,000 cph / 0.24 seconds Speed according to IPC9850: 12,600 CPH Changeover standstill time Ihodpjw Uqdzofx Aalsw

Condition: used, Year of construction: 1998, short loader Ijdpfx Ajvvuu Nealehw bar diameter 12-72 mm

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, load capacity per stand: 5 kg, working range: 400 mm, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar Ihsdpfx Ajxrgkwsalow • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: AAY366, overall weight: 900 kg, Equipment: type plate available, We are selling our EROWA as it is now surplus to requirements. It was previously connected to our DMG65H and functioned perfectly. The robot has been updated to the latest version of the software. Clamping devices can be included by agreement. The machine is currently in storage and has been disconnected by an Erowa technician. All manuals and documentation are available. Interface specification is available. Isdpfxexuh Ddj Aaljhw

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 400 mm working width Finger conveyor Lifting and lowering station Spray fluxer Ihsdpfov Ta Hlex Aalsw Dynamic preheating at the bottom Convection heating

Condition: good (used), 2 pieces available unit price !!! various accessories Ihsdpfjq I Sf Usx Aalow

Condition: excellent (used), functionality: fully functional, Göpel electronic GmbH Automatic Optical Inspection Unit AOI, OptiCon AdvancedLine X60 Model: OptiCon Type: AdvancedLineX60 Operating hours: 51,326 h (switch-on time from internal PLC) Year of manufacture: 2014 Technical specifications: Voltage: 230 V AC Frequency: 50/60 Hz Rated power: 800 VA Short-circuit breaking capacity: 15 kA Compressed air: 6 bar Laser class: 2 Protection class: IP20 Features: - 4M camera with T21 resolution and 42 x 42 mm field of view - Angled view - "Chameleon Colour" module Isdpfswlquiex Aalehw - Extended inspection area in the X direction to 670 mm - 2D barcode reader from below - Software version: 5.3

Condition: like new (used), Year of construction: 2007, operating hours: 300 h, functionality: fully functional, machine/vehicle number: PSW-L, Used in very good condition, only 300 operating hours, 3 pallets included, documentation included Ihjdju A Ddwspfx Aalow

Year of construction: 2015, condition: used, machine/vehicle number: 2903, For sale is our BDTronic dispensing system including Knödel drying oven. The system is fully operational; however, one dispensing head occasionally presents some issues and will require maintenance in the near future. Ihsdpfow S Dfyox Aalsw The system is sold including the drying oven (Knödel paint dryer – dryer model) and transport system (see photos). Location: Zollner Satu Mare / Romania We are also offering: - Asys TRM 03 (year 2012) - Asys FPS (year 2010) - Siplace S 27 and Siplace F 5 HM (year 2006) - Exra X6 HSP (year 2008) for spare parts - Knödel Drying Oven (year 2015) - Nutek Coating Inverter (year 2014) - Rommel LAG WA 470 (year 2006) - Rommel LEG WA 470 (year 2006) - Autosplice placement machine AIS 5000 for 2 placement heads with QCHT principle (year 2001) - Laser marking system: Baasel Lasertech / SMM 65 (year 1998) - Viscom 7056 RS (year 2012) - Many other Rommel handling modules Please contact us— we will be happy to provide further information and photos of our equipment.

Condition: used, Good day, I am selling a used ASYS MPS 100. The unit is fully functional and was used in an SMT production line for both SMD and THT assemblies. If you are interested or have any questions, feel free to contact me. Isdpfx Aaoww Ewvslshw

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, empty load weight: 600 kg, bar diameter (max.): 120 mm, bar length: 1,600 mm, TECHNICAL DETAILS Bar length: 130 – 1,600 mm Bar diameter: 6 – 120 mm MACHINE DETAILS Ihjdpfx Aaexxlzzelew Machine weight: 600 kg Required space: 2.5 × 2.0 × 1.9 m

Condition: used, Year of construction: 2006, Operational unit. Head configuration: CP20/CP20/CP12 Flexible dual lane transport L->R Ihjdjyh Hdzjpfx Aaljw Available in Q1 2026

Year of construction: 2011, condition: used, Operational unit. Ihodpfxoyh Ha Nj Aalow Recently taken from the production!

Condition: used, A packaging machine is being sold. Ihedeur N Ncopfx Aalow The machine can pack goods in boxes or bags.

Year of construction: 2004, condition: good (used), functionality: fully functional, Selling 1 Juki FX-1 and 2 Juki FX-2 from current production. Please contact me if you have any questions. Iedpfx Aovk R H Rsalohw

Year of construction: 2016, condition: not inspected (used), Current hours on tube 3560 (20.000 total lifetime of the tube) PCB width max.: 450 mm x 400 mm Inline X ray + AOI Ihedpfxju E Icvj Aalsw Working condition to our best knowledge. Please note that machine will be sold without warranty and in as-is condition. We always recommend our customer to do a full OEM service prior to installation of the units to production to ensure the maximum efficiency of the machines!

Condition: not inspected (used), Year of construction: 2004, 3mm chain conveyor, central support, internal chiller, SMEMA Ask for additional information! Iodpsvpv Ecjfx Aalohw

Condition: used, Year of construction: 2022, Operational condition. 2 units available. Iedpfx Aowctn Hjaljhw Ask for additional information!

Condition: ready for operation (used), Year of construction: 2009, Parts magazine / conveyor belt Manufacturer: Cefla / Delle Vedove Loading magazine for profiles, parquet, and boards Belt width approx. 300 mm Part length approx. 1000 - 2500 mm Isdpjwxwx Iefx Aalshw Feed motor approx. 0.55 kW Dimensions approx. 2500 x 600 x 1500 mm (LxWxH) Weight approx. 250 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 3002014, empty load weight: 2,500 kg, maximum load weight: 2,500 kg, overall weight: 3,000 kg, Year of construction: 2014, Offer Top condition 11.11.2025 1. 1x Eco Compact 20, year of manufacture: 2014 2. 1x Quick-Point holder for the machine Ihsdpfxoxvyh Ds Aalow 3. 20 pcs. central clamps, 77 steel version, Art. No.: 46160 Complete ex works, free from third-party rights, €47,000 net

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 10089060/30042621, total length: 5,300 mm, total width: 2,100 mm, total height: 2,300 mm, year of last overhaul: 2024, The machine was last overhauled in 2024! TECHNICAL DETAILS Material loading area: 4,000 mm x 2,000 mm Ihedsyfv Exepfx Aaljw MACHINE DETAILS Dimensions (L x W x H): 5,300 x 2,100 x 2,300 mm EQUIPMENT Service and inspection history available from 2019

Year of construction: 2004, condition: used, functionality: fully functional, For sale here is the Rommel ME2-470 input station. The system is operational. Iodoxg E Ukopfx Aalohw