Condition: used, 000012956, Anite 9000 Mobile test accelerator Rev2.3, SN:TB03076, Option:CAT3 Cob Et Djq S S A Aj Stjgt Model: 12956 Condition: Used

Condition: used, RS Simulators Ceb Et D Sjv Rcbaotogt Water-cooled temperature test chamber New generation rod program controller (SE-702 with touch panel and data logger for measurement recording) Filter dryer, refrigeration oil, and refrigerant (R23/3.25 kg and R452a/12 kg) new upon delivery, including a leak test, oil strainers, and sight glasses replaced The chamber is supplied with an RMS substructure, a frame for holding the test sample, and a separate control panel (Pure RMS housing, NO shaker included!) The special feature: the RMS substructure can be extended like a shaker using a pallet truck. This facilitates a possible test setup outside the cabinet. Measurement lines can also be routed to the outside via a duct in the base plate of the RMS substructure. The system includes a compressed air dryer, also known as a dew protection device, which prevents condensation during the heating phase (commonly found in electronics tests) Application) Test chamber dimensions: Height approx. 1000mm / Width approx. 1400mm / Depth approx. 900mm Temperature range: -70°C to +180°C Current consumption: approx. 100 A Total power: approx. 50 kVA Cooling and heating capacity: 10 K/min Since the chambers are overhauled and converted, the delivery time from the date of purchase is approx. 8-10 weeks!! Type: TS1000/70-10K For your safety, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a test run monitored by calibrated equipment. Condition: Used Scope of delivery: (Temperature chamber TS1000/70-10K, without test chamber contents, without shaker) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2017, Condition: used, Manufacturer: Binder Cgsb Ejv If Uwst D Stjt Model: KBF 720 Year : 2017 Type : Climatic chamber with constant conditions Maximum temperature: 70°C Humidity control using a humidity sensor and steam humidification Power: 3.10 kW Maximum pressure: 15 bars Volume: 720 litres Interior dimensions: D 60 x W 100 x H 120 cm Exterior dimensions: D 95 x W 130 x H 195 cm VWR inspection: 04/2023

Condition: like new (used), Portable truck weighing scale Cgjb Et Dsmfqkhe Stst Portable mounted on a chassis, bolted and removable. Capacity 60 MT Length 14 M

Condition: used, Year of construction: 2017, Absolutely as good as new Cgsb Etjvvxvdo D Stst Consists of 1 measuring case 12-20mm Consists of 1 measuring case 20-50mm Consists of 1 measuring case 50-100mm

Year of construction: 1999, Condition: not inspected (used), For sale is a built-in salt spray chamber/corrosion test chamber from Weiss Technik, type: SC/KWT 450 The system must be cleaned and serviced before use. The system can be inspected on site, shipping is possible. Manufacturer Weiss Technik B2misngk99 Type: SC/KWT 450 Cobswbai Uj Et D Stegt Test chamber capacity: 480 l Max. load: 100 kg Brine storage tank: 180 l Corrosion tests: Salt spray test: Room temp. up to +50 °C Babumc3umw Condensation water test: Room temp. up to +45 °C Voltage: AC 230V Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014

Condition: used, 000012956, Anite 9000 Mobile test accelerator Rev2.3, SN:TB13111, Option:CAT3 Model: 12956 Cgeb Eoq S Su Uot D Stet Condition: Used

Condition: reconditioned (used), Year of construction: 2011, Functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 16 kg, warranty duration: 3 months, total height: 1,500 mm, type of input current: AC, total width: 800 mm, total length: 850 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 150 mm, overall weight: 77 kg, input voltage: 230 V, year of last overhaul: 2023, ambient temperature (max.): 30 °C, Equipment: documentation/manual, type plate available, CNC-controlled measuring machine for automatic, optical-tactile Csb Ejq T R Rhot D Stogt measurements with camera and 3D with probe. Interchangeable bench and 2 SF modules are included. PC-DMIS CAD V13 with Step/Dxf programming possible.

Condition: good (used), Functionality: fully functional, For sale here is a digital hardness tester from Wilson in good condition! See pictures Manufacturer: Wilson Hardness Model: B-523-T / Series-500 Rockwell hardness tester with digital display 3 - For vertical height approx. 178 mm Ceb Et Dewa Ufhs Stsgt T- For Twin Tester (29.4 + 98.1 N preload) (147/294/441/588/981/1441 N main load) With operating instructions and accessories as shown (various test tables etc.) The device was in use until the end and is fully functional! Shipping costs by forwarding agent: approx. 90€ You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale ex location 42855 Remscheid, free loaded. Errors in technical data excepted.

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: SNM9209871E, Offering 6 Bronkhorst EL-FLOW FLOW-BUS mass flow meters for sale for €2,200 each. Csbswd I Eio Et D Stsgt See nameplates for details and request.

Condition: excellent (used), Heraeus Vötsch Type: VCS 7018-5 Climatic Test Chamber with Humidity Control, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Characteristics for Temperature Tests: Temperature Range: -70°C to +180°C Temperature Range: ± 0.1 to ± 0.5 K Spatial Range: ± 0.5 to ± 2.0 K Temperature Gradient: 1 to 4 K Temperature Rate of Change according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Characteristic values for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature deviation over space: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3% RH F. Dew point range -3 to +94 °C Electrical connection: Nominal voltage: 3/N/PE AC 400V±10% 50Hz Nominal power: 10 kW Nominal current: 21 A Fuse protection: 32 A slow-blow, provided by the customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Cgeb Etov N Hc Eo D Stjt Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2009, Condition: good (used), Computed Tomography Scanner Manufacturer: Wenzel Type: exaCT M150 HE Year of Manufacture: 2009 General Overhaul 2017 Cjb Etskzhwde D Stjgt Operating Hours: 200 New Tube New Detector Areas of Application: Measurement and testing of small to medium-sized components. The exaCT M is particularly suitable for non-destructive testing (NDT) of plastics, light metals, composites, and multi-materials. 020425ä

Condition: used, 000012956, Anite 9000 Mobile test accelerator Rev2.3, SN:TB13217, Option:CAT3 Cgob Et Dsq S Sr Is Stet Model: 12956 Condition: Used

Condition: refurbished (used), Repair and replacement service for all Heidenhain measuring systems: LS 803, LS 903, LS 303, LS 403, LS 501, LS 503, LS 603, LS 703, LS 106, LS 186, LS 706 LB 325, LB 326, LB 301, LB 381, LB 382 Cgjb Et Doq Sahnj Stot LC 481, LC 483, LC 485, LC 181, LC 183, LC 185 Many measuring systems are also available as exchanges and immediately available. Please inquire about your type.

Condition: excellent (used), Functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Cob Eovz U Erot D Stogt Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Year of construction: 2012, Condition: ready for operation (used), Functionality: fully functional, Feutron climate chamber Type: 3703/13 Hum: 70% Year of construction 2012 See more information in the attachments Cgob Et Djvwm Nuo Stjt Door is damaged (paint damage)

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, overall weight: 7 kg, Equipment: documentation/manual, ATOS 3D scanner consisting of: - Stereo system with 2 cameras - 8 million pps (points per scan) - Two-shell cast housing with encapsulated electronics and external cooling - Removable front panel for easy lens changes - Fast warm-up time - LED illumination - Laser pointer for distance adjustment - Weight approx. 7 kg - Dimensions approx. 310 mm x 220 mm x 150 mm - 10 m cable - Carrying case Measurement fields: - 200 x 140 m² - 70 x 50 mm² GOM probe including probe tip and calibration board: - GOM probe PM 1.5 (point mark size 1.5 mm, M2 thread) Image processing computer 7820 - Workstation: - 64-bit Intel Xeon 2 x 3.0 GHz 12-core CPU - 128 GB RAM - NVIDIA Quadro OpenGL graphics card - 24" TFT monitor - 1 TB SSD hard drive - External USB system backup hard drive for incremental backups - Image processing card - I/O: LAN, USB 2.0 / 3.0 - Windows 10 (64-bit) operating system Motorization kit for ATOS: - Automatic turntable on the rotation and tilt unit - Plate diameters: 300 mm and 200 mm with threaded holes - 5 kg maximum load - Tilt axis: Tiltable up to +/- 115° - 360° rotation axis - Maximum rotation unit speed: 60°/s - Maximum tilt unit speed: 30°/s Cob Etjwaywcs D Stjgt - Motorized vertical axis for sensor positioning - Maximum vertical axis speed: 30 mm/s - Emergency stop switch - 3-axis control unit in 19" format - Stable Table with 750 mm x 750 mm perforated plate - Joystick control - ATOS software control - Motion replay function in the software for recurring measurement and calibration processes ATOS Professional Software/Zeiss Inspect 2025 Inspect Optical 3D License - Setup and calibration - Measurement data acquisition and project management - Polygon mesh processing - Element construction - Alignment - Inspection - Stage management with timeline - Digital assembly - Report module - Process automation with GOM Parametik - Live software module Reference frames: - 50 mm x 50 mm; 0.4 mm uncoded white single-point markers - 150 mm x 90 mm; 0.8 mm uncoded white single-point markers

Condition: good (used), Year of construction: 2018, Functionality: fully functional, type of input current: AC, input voltage: 230 V, measuring range X-axis: 300 mm, measuring range Y-axis: 230 mm, measuring range Z-axis: 440 mm, ATOS Core Technology: ATOS Core 300 Sensor Cgob Eov Uacpot D Stst Camera technology "engineered by GOM" 2 x 5 megapixels Fabric light projection with triple scan and blue light technology Studio tripod kit with accessories High-performance laptop with Windows 10 and GOM Atos Professional software version 2017 Everything included, so you can get started right away

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, Functionality: fully functional, machine/vehicle number: CC5741150004, year of last overhaul: 2025, warranty duration: 12 months, The PROFITEST PRIME AC makes your investment decision easy. Because with the accessories perfectly tailored to your requirements, electrical systems according to DIN VDE 0100-600, machines and systems according to VDE 0113-1, low-voltage switchgear assemblies according to VDE 0660-600-1, PV systems according to VDE 0126-23 and e-charging stations according to VDE 0122-1 can be tested in accordance with the standards. Cgsb Etev Hw S Ss D Stet This device has been used twice. It has been calibrated up to date (see attached photo) and checked by the manufacturer.

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: 20-00220, Werth, Scope Check FB/D2400/500/350, 3D CNC coordinator measuring machine complete with Werth CPU console, monitors and keyboard, serial number: 20-00220, year of manufacture: 2020 Csb Eswcla Uot D Stsgt

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: V0191030017, This offer includes a lightly used KEYENCE VHX-950F digital microscope in very good condition. Year of manufacture: 2019 Items for sale: - 1x Keyence VHX-950F - 1x VH-Z20R zoom lens (RZx 20-x200) - 1x VH-S30B motorized stage - 1x VHX 95F - 1x VHX-6020 camera unit - 3x software CDs (VHX-H3M / VHX 6000 950F / VHX-700F) - 1x user manual + simple operating instructions - 2x lens cases with accessories Csb Etswfqbvs D Stsgt The device is in perfect working order and can be viewed and tested in our offices. Please arrange an appointment. Packaging and shipping available upon request. For any questions, please contact us. Feel free to contact us by email or phone. Provider: CMA Engineering GmbH 80686 Munich

Year of construction: 2023, Condition: good (used), Functionality: unexamined, machine/vehicle number: SRV54341, Ladies and Gentlemen, We are selling the Hitachi FT230 XRF analyzer described and photographed here. Excerpt from the manufacturer: Each individual element of the FT200 series has been developed to drastically reduce the analysis time. Automated focusing reduces sample loading time Intelligent recognition with the Find My Part™ function automatically sets up the complete measurement routine Sample view is displayed over a large part of the screen for excellent visibility Self-diagnostics confirm the condition and stability of the device Seamless integration with other software and easy data export Intuitive and easy to use thanks to a new user interface Powerful: simultaneous measurement of up to four layers and substrates Designed for demanding production or laboratory environments Complies with ASTM B568 and DIN ISO 3497 standards Supports you in meeting the specifications for ENIG (IPC-4552B), ENEPIG (IPC-4556), Immersion Sn (IPC-4554) and Immersion Ag (IPC-4553A) Further information: Detector: Silicon Drift Detector (SDD) Element range: Al (13) - U (92) Stage travel: 250 x 200 mm Motorized Z-axis movement: 205 mm Maximum sample size: 500 x 400 x 150 mm Laser focus: Standard Coating thickness analysis: possible RoHS screening: possible Further information and images of the machine are available on request. Cjb Et Deuwkr Dj Stogt Disclaimer The machines offered are sold "as is" and "without warranty". Any express or implied warranties, including, but not limited to, warranties of merchantability or fitness for a particular purpose, are hereby expressly disclaimed. Seller assumes no responsibility for the operability, reliability or accuracy of the machine. It is the buyer's responsibility to thoroughly inspect the machine prior to purchase and ensure that it meets his requirements. Any descriptions or specifications of the machine are for information purposes only and may contain inaccuracies or errors. The seller shall not be liable for any such inaccuracies or errors and assumes no obligation to update or correct such information. Buyer agrees that Seller shall not be liable for any damages or losses arising directly or indirectly from the purchase, use or inability to use the machine, including, but not limited to, lost profits, business interruption or consequential damages. Any repairs or modifications to the machine after purchase are the sole responsibility of the buyer. Seller shall not be liable for damages caused by improper repairs or modifications. By purchasing the machine, the buyer expressly agrees to the terms of this disclaimer and waives any claims against the seller in connection with the purchase or use of the machine.

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, Make Accretech Profilometer Type: SURFCOM NEX 001 Surface and contour measurement in a single instrument Rapid measurement of different workpieces even with temperature fluctuations Measurement of surface finish and contour – sensors can be combined as required Rapid preparation and measurement thanks to the fastest drive in its class and a wide range of hybrid sensors Cgeb Et Djv T Rrfe Stst The only measuring instrument with linear motor drive that performs measurements that are almost vibration-free and can be used at 20 ± 5 °C Rapid drive for shorter cycle times Innovative column and feed unit with linear drive ensure significantly higher traversing speed

Condition: as good as new (ex-display), Year of construction: 2016, In the client's order: Measuring range: (X; Y; Z) 300 x 300 x 200 mm Measurement uncertainty: MPE_E = (1.9 + L / 250) μm Software: Calypso 5.8 Highlights • Tactile scanning sensor VAST XXT: low probing forces, smallest Tastkugel- diameter, many measuring points by means of Scanning for shape testing • Lens ZEISS Discovery: large, directory-free field of view • white light sensor. Allows the measurement to be smaller and more sensitive Non-contact workpiece surfaces Optically and tactilely, ZEISS O-INSPECT offers premium sensors for top performance. Fully in 3D, without compromise in the software. The software ZEISS CALYPSO not only provides results in a simple way, it also makes it easier to identify and communicate causes of errors. • Reference software ZEISS CALYPSO: Live image and result in a view 3D CAD capability, fits • integrated pallet receiving system with Interface to the automatic temperature measurement Cgsb Et Djdyqtqs Stot ### Symbol image is the property of the manufacturer ###

Year of construction: 2023, Condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature • Embedding time adjustable up to 60 minutes • automatic cooling cycle • no compressed air required Cgeb Etocwamxs D Stot • 12 month warranty Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)