Used multi blade saws for sale (188)

Condition: ready for operation (used), Track width (mm): 250 Godpfx Aettr D Rjayekf Max. cutting height (mm): 100 Motor power (kW): 17

Condition: excellent (used), Year of construction: 2002, power: 37.3 kW (50.71 HP), Selling a multi-blade circular saw with two shafts. Gedpfewmxi Rjx Aayokf

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008 / 576, cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, power: 15 kW (20.39 HP), warranty duration: 6 months, NEVA warranty includes plug & play equipment: - material guiding per choice: channels, center guide, side guide - 2 frames, 2 sets of saw blades and 2 sets of spacers - assembly frame and accessories - torque wrench, set of tools, etc. Gjdpfsxtm Rajx Aayskf - complete revison of machine before leaves our factory The ORBIT Plus Thin Cutting Frame Saw was developed for cutting solid wood blocks into gluable slats with a minimum of saw kerf waste. Thin Cutting Frame Saw ORBIT utilizes a unique up/down method of movement for cutting veneer slats. Unlike conventional frame saws that move up and down in a lineal motion, the ORBIT Thin Cutting Frame Saw uses a patented swing-out motion at the bottom of the saw stroke. Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. This unique movement of Thin Cutting Frame Saw ORBIT has several distinct advantages over the frame movements on older, conventional frame saws. With a conventional frame saw, a great deal of heat is generated by sawdust that is captured/packed into and around the saw blade teeth. This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This fact is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. Because the ORBIT saw frame moves out of the cut during the upstroke, wood chips and sawdust fall clear from the saw blades. The result is less heat build up on the saw blade, longer saw blade life, dust free slats, the ability to use a thinner kerf saw blade and first of all increased production capacity of the ORBIT frame saw.

Condition: good (used), Year of construction: 2016, I sell the multirip saw of slovenian production MEBOR VR900. Cutting height under the blade 160mm / possibility of adjustment Width of cut on the feed wheel max. 900mm. 1 pc. moving head with laser adjustment. Diameter of main saw blade 300 - 500mm. Gsdexxgy Sepfx Aayjkf Motor 55 KW. Total weight approx. 4000kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: used, Edger saw with output conveyor Manufacturer: Larmet Year: 2014 Edge banding machine: Length: 193 cm Width: 85 cm Height: 220 cm Motor power: 18.5 kW Gkodpfoxyh U Hjx Aayjf Board separating conveyor: Length: 615 cm Width: 68 cm Height: 190 cm Roll length: 40 cm Motor power: 1.5 kW

Condition: good (used), Year of construction: 2010, RAIMANN Econorip 310 multi-saw - German production - CE marking - Quickfix disc sliding system - year of production 2010 TECHNICAL PARAMETERS: - cutting height 110 mm - cutting width 340 mm - engine power 22 kW - adjustable feed on the inverter - electric shaft height adjustment - electric adjustment of the pressure height - spindle in the Quickfix system (the possibility of changing the dimensions without the need for tools) - track diameter max 350 mm - spindle diameter 65 mm - sleeve diameter 80 mm Gsdpsh Tm Aljfx Aayokf - four upper pressure rollers - four rows of anti-jet pawls - boot for short elements - max width of the element 700mm - minimum element length 300 mm - central lubrication - diameter of the stub pipe 250 mm - ruler Machine dimensions: 190x185x165 cm weight 1800 kg

Condition: good (used), functionality: fully functional, Multiblade Foiler WD FR8 with centering device 2x floating saws maximum saw blade distance 550 mm maximum cutting height 165 mm maximum clearance: width 880 mm x height 180 mm central lubrication system hydraulic roller lifting system Gkedsqwgy Nepfx Aayef feed speed continuously adjustable in the range of 0-250 m/min centering conveyor at the entrance to the machine full hudraulics strong solid body robust line not afraid of challenges

Condition: good (used), cutting height (max.): 200 mm, chain width: 400 mm, input voltage: 380 V, height adjustment type: electric, rotational speed (max.): 3,400 rpm, power: 37 kW (50.31 HP), MAX cutting depth: 200 mm Chain width: 400 mm Gsdpstvpfmefx Aayskf MAX distance between exterior blades: 380 mm Blades diameter (min/max): 250 / 350 mm Adjustable feeding speed (inverter): 5 – 30 mt/min MIN workpieces lenght: 1000 mm Blade holder diameter: 70 mm Spindle shaft speed: 3.400 RPM Main motors power: 2 x 37 kW

Condition: not inspected (used), functionality: unexamined, MULTIPLE CIRCULAR SAW PAUL K 34G/1500 OCCASION TECHNICAL FEATURES: - DRAGGING SYSTEM RUBBERIZED ROLLERS. - USEFUL DRAG WIDTH OF 1.500 MM. - MAIN ENGINE POWER 37 KW (50 Cv) - ELECTRONIC VARIATOR REDUCER MOTOR OF DRAGGING 3 HP AND Gksdpfjuryrnsx Aayjf 2-48 M/MIN - MAXIMUM SAW DIAMETER 300 MM - CUTTING HEIGHT MAX 100 MM

Condition: good (used), Year of construction: 2019, Rear-loading panel saw with panel turntable Gkedpfx Aajv Aiaasyof

Condition: used, Multisaw Length: 270 cm Gkjdpfjxygbrjx Aaysf Width: 150 cm Height: 160 cm Motor power: 22 kW

Condition: used, Year of construction: 2001, machine/vehicle number: AB145642, MULTIRIP SAW SCM MOD. M3 – CE RULES - Year of manufacture: 2001 - Serial number: AB145642 - Power supply voltage: 400 V / 50 Hz - Motor power: 18.5 kW - Blade rotation speed: 4,200 rpm - Maximum blade pack width: 300 mm Gjdewr Elpjpfx Aayjkf - Conveyor belt width: 300 mm - Maximum blade diameter: 350 mm - Minimum blade diameter: 200 mm - Minimum workpiece length: 390 mm - Blade bore diameter (shaft): 70 mm - Keyway dimensions on blade shaft: 20 x 5 mm - Distance from machine base to first right blade: 200 mm - Conveyor feed speed: continuously adjustable from 6 to 48 m/min - Conveyor type: with direct-joint spheroidal cast iron pads - Conveyor guide rails: low-friction, one with prismatic profile for perfect straightness - Conveyor lubrication: automatic - Clutch: present on feed speed variator - Working table height from floor: 750 mm - Working table dimensions: 1,530 x 950 mm - Dust extraction port for blades: Ø 200 mm - Dust extraction port for conveyor: Ø 120 mm - Air volume extracted (at 25 m/sec): 3,850 m³/h - Programmable fence: with turret stops, pneumatic positioning via foot pedal - Laser reference: for cutting line - Base frame: made of single-block cast iron

Condition: excellent (used), Year of construction: 1988, MEM Cobra 2MT Multisaw 2 movable couplers hydraulically floating saws 2 motors 30kw cutting height 100mm cutting width 900mm 2 hydraulic pumps 15kW and 7.5kW electronic control 4 line lasers High efficiency Gkodemv H Dqepfx Aayjf weight about 8000 kg

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Cutting height under the blade 120mm / possibility of adjustment Gsdemk E D Iepfx Aayskf Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: good (used), Raimann multi-blade circular saw, in good condition, available immediately If you are interested, we will also be happy to inform you about other machines in our company. Godpfxstukd Ne Aayekf You are welcome to view the machine at our premises by prior appointment.

Condition: used, SCM M3 double edger, in good condition, 300 mm cutting width, 100 mm cutting height Godpfoxlnpnox Aayokf

Year of construction: 1993, condition: used, - working width (mm): 2200 - engine power (kW): 22 - top rollers: with PU rings - bottom rollers: knurled Gksdpon I Twyofx Aayef - Saw shaft: included

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, cutting height (max.): 80 mm, overall weight: 1,500 kg, saw blade diameter: 280 mm, input voltage: 400 V, Powerful lamella saw from Swedish production. Equipped with a 30 kW motor. Additional saw blades and spacer rings are included in the scope of delivery. Very good condition, beam width 200 mm. Transport across Europe can be organized at a good price. Gjdpfx Aexg N Emoayjkf

Year of construction: 1976, condition: good (used), - cutting height 120 mm - cutting width 500 mm - engine power 30 kW - material width max 730 mm Gjdpfsn D A I Esx Aayjkf - four types of feed speed - spindle diameter 55 mm - sleeve diameter 90 mm - three lower pulling rollers - two upper pulling rollers - shaft support

Condition: good (used), Year of construction: 2012, I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012. Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table 9,20m Gedpfxeppwx Es Aayskf 5 pcs. kickers on left outfeed table Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm feed rate 5-30 m/min. sawing motor 37 KW (also more KW possible) feed motor 2,2 kW max. saw blade insert at 145 mm 6 saw shaft diameter 70 mm weight 3.200 kg Special equipment Electrical height adjustment of the infeed rollers Laser with adjustment device Gkjdpfxsu I Dmo Aayjf Driven roller gear Electronic braking device

Condition: excellent (used), track width: 360mm shaft width: 350mm max disc diameter: 350mm disc bore diameter: 80mm max cutting height: 120mm electric lifting of the saw shaft electric lifting of the body Gjdpsu Evqnofx Aayskf smooth regulation of feed speed feed motor: 2,5kW main motor: 45kW

Year of construction: 1984, condition: excellent (used), • Year 1984 • 2x55kW main engines Gkjdpfx Aslrxfqjayof • Max saw blade diameter 300 mm • Max cutting height 200 mm • Track width 350 mm • Shaft length 430 mm • Shaft diameter 60 mm • Inverter feed

Condition: good (used), Year of construction: 1994, The feed hydraulic pump is missing. Otherwise, the machine is operational. Gkedpoxn Ukkofx Aayof

Condition: good (used), Year of construction: 1989, GABBIANI SA/350 Multirip Saw Track width: 300 mm Shaft width: 300 mm Max cutting height: 120 mm Max blade diameter: 350 mm Blade bore diameter: 70 mm From above: 2 rows of pawls + Smooth pressure shaft, sliding + Pressure roller + Shaft with saw blades + 2 smooth, sliding pressure shafts + From below: Guide + Pawls + Track (chain feed) + 2 feed speeds + Main motor approx. 35 kW Gedpfxjxn Szmo Aayokf Feed motor 1.3 kW Central lubrication + Table size (L/W): 2000x710 mm Dimensions (L/W/H): 2400x1350x1350 mm Weight: 1360 kg