Used manipulators for sale (38)

Condition: ready for operation (used), A DMG Automation robot automation cell is available. Interior dimensions X/Y: approx. 700mm/1050mm, max. workpiece weight: 10kg, max. workpiece dimensions X/Y: 150mm/120mm, positioning accuracy: +/-0.1mm, robot axes: 6, robot controller: Kuka KR C 2. Documentation available. On-site inspection is possible. Ledpfxjwixzxe Adtehb

Condition: ready for operation (used), Year of construction: 2008, A stacker and destacker cutter for the PCB industry is available. 1) Stacker for slotted cassettes Kuttler SUE 50, year of construction: 2008, running direction: right-left, operating hours (plate counter): 2.8 million, weight: approx. 800 kg. 2) Single stacker for slotted cassettes Kuttler RLE 160, year of manufacture: 2004, with conveyor belt CO 800, year of manufacture: 2008, running direction: right-left, operating hours (plate counter): 5.4 million. The system is missing cylinders and brackets for automatic format adjustment. Documentation available. On-site inspection is possible. Lhodpjv Daggofx Adtjb

Condition: ready for operation (used), Year of construction: 2000, A total of three conveyor belts (transport modules) are available for the PCB industry. 1) Three-segment conveyor belt with buffer module Asys FPS 30, year of manufacture: 1996. 2) Transport module Rommel SM 600 T. 3) Transport module Rommel BM 500 S, year of manufacture: 2000. Documentation available. On-site inspection is possible. Ljdswzlfuepfx Adtjhb

Condition: ready for operation (used), Year of construction: 2018, A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Lhodpfxswhfnpo Adtob

Condition: ready for operation (used), Year of construction: 2019, A conveyor belt is available for buffering and transferring PCBs between processing systems. Transport height: 870mm-970mm, max. transport width: 460mm, min. PCB dimensions X/Y: 70mm/50mm, max. PCB dimensions X/Y: 460mm/460mm, PCB thickness: 0.5mm-4.5mm, max. PCB weight: 3kg. Machine dimensions X/Y/Z: approx. 1590mm/800mm/925mm, weight: approx. 170kg. Documentation available. On-site inspection is possible. Ljdpfxewwvvvs Adtohb

Condition: good (used), Year of construction: 2009, Stäubli t TX90 L with Controller CS8C. (2009) Lhsdpsv Hdk Ijfx Adtjb Number of axis: 6 Payload: 5 kg

Condition: as good as new (ex-display), Year of construction: 2022, Alfa Star pickers available in 3 versions: P 450V, P 650V, P 850WV Lsdpfjqwyi Dex Adtohb Available immediately from stock in Poland Year of production - 2022 P450V Injection molding machine short-circuit force range -30-60 tons - €1799 Vertical stroke [mm] -450 Transverse stroke [mm] -120 Rotation angle [°] -60-90 Pickup time [s] -1.3 Max. load capacity [kg[ -2 Dry cycle time [s] -4.0 Air consumption (NI/cycle) -11 P650V Injection molding machine short-circuit force range -50-160 tons -1985 euro Vertical stroke [mm] -650 Transverse stroke [mm] -120 Rotation angle [°] -60-90 Pickup time [s] -1.7 Max. lifting capacity [kg] -2 Dry cycle time [s]-4.5 Air consumption (NI/cycle) -14 P850WV Injection molding machine short-circuit force range-160-300 tons -2495 euros Vertical stroke [mm]-850 Transverse stroke [mm] -200 Rotation angle [°] -60-90 Pickup time [s] -1.9 Max. load capacity [kg] -2 Dry cycle time [s] -5.8 Air consumption (NI/cycle) -14 More than 30 units available off-the-shelf, all with CE. We have access to spare parts and service. Offer for users and distributors

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Ljdpfxjurlcrj Adtshb Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns Lodpfsfy T Arjx Adtehb The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. Lhsdpfxofz Dmme Adteb The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Lhodpfx Adjfz Dqmetob Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Lodpfjv Rpx Sox Adtehb Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Condition: excellent (used), Year of construction: 2019, 2-axis positioner - BEAR RT series Robot - Kawasaki BA006L from the year 2019 Power source - Fronius TPS 400i from the year 2019 Robot and positioner in very good technical and visual condition - as shown in the photos. In continuous operation. Lhjdpfx Adsmu Agpotsb

Condition: used, Year of construction: 2017, Manufacturer: Manut LM Model : MAN Lhsdpfx Adsx R A Nveteb Year: 2017 Body type : Vacuum Tube Manipulator Application : Handling of bags and boxes Maximum load : 30 kg Classification: ATEX Vacuum pump : Becker SV 8 400/2 Dimensions : see photo drawing.

Condition: used, Vacuum lifting and transport system. Handling equipment for easy transport of boxes, crates, bags, packs, bundles, … without effort. Gripping tool with 4 suction cups. Maximum weight: 35 kg Vacuum pump with insulating box. Jib crane Liftop brand. Lsdex R Alqspfx Adtohb Height : 300 cm Maximum lift diameter: 400 cm

Condition: excellent (used), Year of construction: 2014, Vacuum unit for e.g. manipulator, Dalmec - used - : Price (net), ex location: only €995 Manufacturer: dalmec Type: vacuum lifter Ljdpfevzli Isx Adtjhb Year of manufacture: 2014 Code: 85.16.0991 Load capacity: 7kg. Operating pressure: 0.60Mpa With this unit, plastic stacking boxes with external dimensions (LxWxH): 1,190 x 610 x 420mm filled with cable harnesses were lifted (see photos below) Condition: very good Available: immediately Location: Emden, later warehouse Frankenberg / Saxony

Condition: used, Year of construction: 2000, 2 Schmalz vacuum lifters, year of manufacture 2000 The lifting devices were stored in working condition but are no longer needed. The smaller unit has a lifting capacity of 500 kg, the larger one 2,000 kg. The price is per unit. Only the vacuum lifters are being offered, not the other items visible in the photos (such as tires, pallets, trolleys, metal buckets, etc.). Collection in Bremen. _____ Our terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the images provided. The technology and wear of the items offered are consistent with their age. Lhedpoxxv Eqsfx Adtsb Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: excellent (used), Year of construction: 2005, Industrial manipulators (2 units) Mounting: ceiling-mounted Ceiling guide length: approx. 15 meters Number of axes: 4 Load capacity: Manipulator 1: 30 kg Lhodjwvi Upepfx Adtob Manipulator 2: 35 kg Gripper: pneumatic part gripper (for each manipulator) Year of manufacture: 2005

Condition: used, functionality: fully functional, Available stock: 30 units. The item is sold individually. The price per unit is €6,000.00. Lhedjx Sw N Topfx Adteb

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 1750851, load capacity: 100 kg, Dalmec manipulator with vacuum generator and column. Dismantled from an unused production line, in perfect condition. Tested, fully functional, practically new. Working range: 2,530 mm Lhjdexxbczjpfx Adtjb Vertical lift: min. 950 mm, max. 1,850 mm (lower edge of flange) Load capacity: max. 100 kg Manipulator weight: 450 kg + column

Condition: good (used), overall weight: 280 kg, FANUC positioner. manufactured in 2012. tested and serviced. Lsdswzk Syopfx Adtjhb collection only

Condition: new, Year of construction: 2026, Vacuum lifter for glass GLASS SYSTEM DS600C Device dedicated for window production and narrow glazing Lifter features • Equipped with suction pad covers. • Individual adjustment of each suction pad on the Y-axis • Manual control – vacuum suction/release • Smooth manual rotation around its own axis by 45 degrees • Smooth adjustment from vertical to horizontal position • Easy suction pad configuration without tools Ljdpfexqfwyex Adtohb • Power supply: 230V • Own weight: approx. 80 kg • Lifting capacity: 200 kg • 3 suction pads Ø 250 • CE certified

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DS550 CA, overall weight: 50 kg, load capacity: 400 kg, VACUUM LIFTER PANEL SYSTEM DS550 CA Compact vacuum device for sandwich panels, ideal for wall installation. Its construction allows it to fit even in the trunk of a passenger car. The lifter is additionally equipped with a rotator, enabling 360° rotation of the panel. Available with radio control, manual operation, and a single-circuit version. Weight of the device: 50 kg Lifting capacity: 400 kg Control - radio/manual Power supply - external battery (DeWalt - one included, with charger) Lsdpfx Ajwutibodtshb Battery charge indicator: Yes Mounting position: vertical/horizontal Vertical wall mounting: Yes Number of suction pads: 1 Material length: 1-8 m

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 600, overall weight: 60 kg, warranty duration: 12 months, GLASS SYSTEM DS600 MINI VACUUM LIFTER For facade installation, glass window assembly, and glass transportation. Device size optimized for operation between façades and scaffolding. Technical specifications Lifting capacity: Maximum lifting capacity: 350 kg Control system: Radio remote control (remote range up to 200 m) Lodpfewzafpox Adtohb Battery charge indicator: Yes Power supply: Battery-powered, up to 12 hours of operation Construction: Number of suction cups: 4 Number of circuits: 1 Number of arms: — Device weight: 60 kg Movement capabilities: Vertical/horizontal rotation: No Rotation around own axis: No Option to use rotation actuator: No Supported material dimensions: Minimum: 0.8 x 0.8 m Maximum: 2.5 x 2.5 m Ability to lift HST glazing: No Compatibility: For use with cranes and HDS (truck-mounted cranes) Flexible device configuration – can be tailored to individual customer needs

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Ledpfx Adou H R Iwotohb Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition