Used Horizontal machining centers with shuttle table (wood) for sale (223)

Condition: excellent (used), Year of construction: 1995, CNC machine in good condition due to limited use. Previously used for door production but can be used for any purpose. Double table, can be loaded from the left and right. 4-axis x 5000 mm y 1350 mm z 450 mm a 190° Main spindle SK 40, 8 kW, water-cooled Todpfx Aoig T Epskied Up to 17,000 rpm Chain magazine with 24 positions.

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Todpfxjixxwme Akiod Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Tjdpfx Akjrz Irrsiod Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: excellent (used), Year of construction: 2013, Technical design: Console table 3050 x 1200 mm with 6 consoles that can be manually moved, each console with 2 vacuum suction cups and one pneumatic excavation rail. Dot laser positioning aid, vacuum pump. Control system: CNC XILOG Plus. Main spindle: 8.5 kW (12 HP) HSK 63F with C-axis, 1500 – 24,000 rpm. Tool changer: rotary tool magazine, 12 positions. 1 adapter unit with pivoting saw. Drilling head with: 12 vertical spindles, 4 + 2 horizontal spindles, nut saw. Bumper safety system. Tjdpokqyizefx Akied The tools, HSK tool holders, drills, etc., shown in the images are not included in the scope of delivery!

Condition: used, Year of construction: 2014, Maximized productivity with two heads and two autoloaders. The exclusive design of hopperfeeders (Pade patent) allow the manual loading of the pieces without any barrier in front of the operator. The piece-holder magazine can be easily “parked” to the side to allow the manual loading of the pieces. Pneumatic clamps with locking from bottom to top that can be easily positioned on the TANDEM pods in order to quickly change the configuration from manual to automatic loading. Main features: - Working heads with the possibility of choosing between 1, 2 and 4 spindles - 2 working tables with pods, vacuum table or combined with customizable dimensions - Possibility to add single or multiple clamping systems and CNC lathe - Automatic workpiece loaders with magazine - E-LAB programming system, automatic trajectories manager Tjdpfexw Ty Nsx Akisd Main functions: - Mortising - Drilling - Milling - Cutting - Tenoning

Condition: used, Year of construction: 2007, - Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm - CE safety devices - 8 ATS plate holders - L = 1525 mm - 24 sliding rails - Automatic positioning of 8 plate holders and sliding rails (EPS X-Y) - Conveyor belt for removing chips and scrap - Pneumatic locking system, divided into 2 working areas in X - 8 rear reference stops with a stroke of 115 mm - 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm) Todpfxjzux Nwo Akisd - 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm) - 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - Sensor for detecting lowered stops. - Pneumatic system for lifting rod holders. - 6 lifting rod holders for easy loading - H = 74 mm modules. - Vacuum system for a 250 m3/h pump - 250 m3/h rotary vane vacuum pump for standard vacuum system Composition C3-A1 - Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit. - Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position. Composition C3-P2 - Additional Z-slide for rear work units, controlled by an independent Z-axis - 16 vertical and 4 horizontal drilling spindles in the Y direction - Chain-type tool changer with 22 positions at 180 mm center distance - Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer - RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle - Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head. - Automatic lubrication system - Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions. Note: - Additional overhauled 5-axis main spindle - 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.

Condition: used, Year of construction: 2006, functionality: fully functional, TECHNICAL DETAILS Components ADVANTAGE C transverse loader: automatic ROTATING DEVICE (flipper): available BIESSE FTT: with 4 heads, drilling and milling, automatic tool change BIESSE FHT: 2 WORKING UNITS horizontal drilling and dowel insertion WANDRES: brush cleaning from top ADVANTAGE SC transverse unloader: automatic Plate dimensions Plate length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Plate width: 140 - 800 mm Plate thickness: 12 - 60 mm Tsdpfx Aoy Ui Rnskijd Drilling units Drill heads FTT 800: 2 machining centres with 4 boring units - 5 working tables Vertical spindles (X-direction): 14 independent per head Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Revolver cartridges: 2 Positions per cassette: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B. Milling spindles Electro spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Electro spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Lateral positioning units Workstations: 2 for parallel processing of identical or mirror-inverted panels left positioning element: fixed for lateral reference Right positioning element: movable in X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X Length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross feed, single drive Unloading system: 1 belt conveyor with cross feed, single drive Additional: Cleaning fan in the unloading area Drill heads FHT (horizontal): machining centres with 2 working units (1 LH unit / 1 RH unit) - 3 working tables. HORIZONTAL BORING UNITS with 24 independent spindles to be installed onto 2 operating units HORIZONTAL INSERTING UNITS WITH 5+5 GLUE INJECTORS AND 8 mm. DIAMETER DOWEL INSERTERS TOOL-HOLDER ADAPTOR for the quick change spindles of the boring units. GLUE INJECTION AND DOWEL INSERTING UNIT for 8 mm. dia. dowels to be added to the standard ones. The unit is prearranged for the insertion of 8 mm. diameter and 25-35 mm. long dowels.* The 8 mm. diam. dowel inserting units are required. NOTE: Dowel inserting unit was never used and not tested. Not possible to be tested ADVANTAGE C 3200 TRASV. 1 POS - loading ADVANTAGE SC 3200 TRASV. 1 POS - unloading Security features Standards: CE compliant Safety equipment: Extensive protective enclosures

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Todpsh Txlcofx Akisd Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: good (used), Year of construction: 1997, functionality: fully functional, CNC machining center Biesse Rover 20 Year of construction 1997 Manufacturer Biesse Italy S/N 64851 Tjdotpuu Depfx Akisd Working area 2.893 x 950 mm 6 traverses with 12 vacuum cups Milling spindle with ISO 30 tool holder 3.6 kW, drilling unit: 10 vertical drills 6 horizontal drills Grooving saw, 6-fold tool changer. NC410 control unit Color screen Total power consumption 10 Kw 400 V , 50 Hz with safety fence ( not on the pictures ) 3 step mats with Becker vacuum pump, 3,0 Kw CE marked 1900 kg

Condition: used, Year of construction: 2008, - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - Main spindle 7.5 Kw / 11kw - Vertical drilling unit - Horizontal drilling unit - Dado cutter - Tool changer for 18 positions CNC machining center Manufacturer: IMA Type: Bima 300 Year of manufacture: 2008 Technical data Tedpfx Akszux Tisisd - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - 1x Main spindle 7.5 Kw / 11kw (S1 / S6) HSK F63 1500 - 18000 rpm - Horizontal drilling unit - Vertical drilling unit - Dado cutter - 2x Vacuum pump, each 90 m³/h - Safety mats - IMA Wop software + office license

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Tjdjydf Ndspfx Akiod Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum tool capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Stock location: Röllbach

Condition: used, machine/vehicle number: 008166, X axis working area: 4250 mm Y axis working area: 1250 mm Working Table: Pod and Rail Tjdpjyy U S Isfx Akisd Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 25 Total number of tool changer positions: 14

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Tjdpfxow A Ruqe Akijd Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit

Condition: used, Year of construction: 2007, The SHARP double-table machining center with 6 or more interpolated axes has an extremely rigid gantry frame and is particularly suitable for the production of elements for chairs, furniture, tables, beds, shells, stair components and musical instruments. • 4 motors of 9.6 kW each • Possibility of machining elements up to 145 cm wide and 200 cm long • Technically efficient machine with PITAGORA simulator and anti-collision program, AlpaCAM software and OSAI control • Year 2007, machine no. 445 Todpsxxh Haefx Akisd • Dimensions that are needed in the hall to set it (building dimensions) - width 3.7 m (from the operator's side) x length (depth) x 4.9 m • Equipped with: a) 4 higher tables for attaching elements / beams b) 4 lower tables for attaching elements / beams c) vacuum pump d) bars with a length of 113 cm for vacuum / for mounting pressure / positioning cylinders - 4 items

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Manufacturer: BACCI Model: EVO JET Type of machine: CNC Machining Center Year of manufacture: 2013 The EVOLUTION JET is an extremely flexible machining center, both in terms of adjustable dimensions and the number of worktables, onto which devices for manual, semi-automatic, or fully automatic loading and unloading can be installed. Ideal for simultaneous processing of all components required for assembling chairs or furniture on a single machine. Technical data: Fully digital NC axes: 12 Linearly interpolated axes: 3 + 3 or more Rotary interpolated axes: 2 + 2 Longitudinal axis (X): 3,400 mm or more Tsdpfsxw Nv Hsx Akisd Transverse axis (Y): 1,300 mm Head transverse axis (Y): 1,000 mm Vertical axis (Z): 750 mm A-axis: unlimited C-axis: +/- 180° 5-axis spindle CNC self-adjusting worktables Special material clamping system Rack gripper OSAI machine control Electrical cabinet cooling Independent Z-axes: 2 Number of milling spindles: 4 Maximum spindle speed (rpm): 24,000 Cantilever design 2 tables Belt feed loading External transport: roller conveyor Enclosed cabin CE marking

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Tedpovctlgjfx Akiod Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,280 mm, travel distance Z-axis: 250 mm, number of spindles: 16, TECHNICAL DETAILS Working area X-axis: 3,300 mm Working area Y-axis: 1,280 mm Working area Z-axis: 250 mm Travel X-axis: 4,000 mm Travel Y-axis: 1,670 mm Travel Z-axis: 500 mm Number of horizontal drilling spindles: 4 pcs. Number of vertical drilling spindles: 12 pcs. MACHINE DETAILS Voltage: 400 V Current consumption: 40 A Power: 18 kW Number of transport packages: 2 EQUIPMENT Tsdpfx Asyux I Uekisd Documentation CE marking HSK-F63 tool clamping system Drilling tool Saw unit

Condition: good (used), Year of construction: 2006, I sell the 3-axis CNC working centre Biesse Rover A 3.30 with beam table, year 2006. Configuration: 3-axis main spindle HSD Tool magazine 14 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 3130x1250mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Uniclamp System included Total power 17kW Biesse Works software controller with full instructions. Pump Becker 110 m3/h. 2,4KW. Tedpfx Ajzmnzmjkisd Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Tsdpfx Akozux Tpoiod Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA1/017825, functionality: fully functional, travel distance X-axis: 5,200 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 160 mm, number of axes: 5, number of slots in tool magazine: 12, TECHNICAL DETAILS Number of controlled axes, milling spindle: 5 Tool holder: HSK-F63 Type of milling table: Cross table Tool changer positions: 12 Working area, X-axis: 5,200 mm Working area, Y-axis: 1,550 mm Working area, Z-axis: 160 mm MACHINE DETAILS System/Software: SCM Maestro Vacuum pump Manufacturer: Becker Type: VTLF 2.250/0-791 Year of manufacture: 2014 Main motor power: 5.5 kW Capacity: 244 m³/h Negative pressure: 200 mbar Tjdpfszuwt Ujx Akiod Overall length: 9,000 mm Overall width: 5,000 mm Overall height: 3,100 mm EQUIPMENT Vacuum pump Becker VTLF 2.250/0-791 Manual control CNC documentation on USB stick Safety light curtain Safety fence CE certificate Documentation

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: AA2-002032, functionality: fully functional, operating hours: 9,974 h, overall weight: 7,450 kg, feed length X-axis: 5,020 mm, feed length Y-axis: 1,680 mm, feed length Z-axis: 250 mm, TECHNICAL DETAILS X-axis travel: 5,020 mm Y-axis travel: 1,680 mm Z-axis travel: 250 mm Number of axes: 5 Software: SCM XILOG MAESTRO Tjdpfx Asy Akgajkied Control systems: SCM PRISMA K, SCM TTS System, SCM TecPad, MORBIDELLI TV Matic, SCM PRO-SPACE, SCM RAPID 12, SCM RAPID 24 Tool changer: 36 positions Drilling units: 24 x vertical MACHINE DETAILS Machine dimensions (LxWxH): 2,400 x 8,000 x 2,400 mm Total weight: 7,450 kg EQUIPMENT - Vacuum pump with 250 m³/h capacity - Liquid-cooled milling spindle

Condition: used, machine/vehicle number: 008205, X axis working area: 4250 mm Y axis working area: 1320 mm Working Table: Pod and Rail Tjdpex A Th Rsfx Akiod Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 22

Condition: used, Year of construction: 1998, WEEKE BP 150/K Manufacturer: WEEKE Type: BP 150/K Year of construction: 1998 Machine type: CNC machining center / Point-to-point cantilever machine Working area X approx. 3,645 mm* Working area Y approx. 1,250 mm* Working area Z approx. 250 mm* 1 main spindle power: 10 kW Main spindle speed max. 24,000 rpm Tsdpfx Akszvbhroisd Tool holder: HSK-F63 Tool changer: 8-position 4th axis 30 vertical drilling spindles 6 horizontal drilling spindles Table system: Console table Number of consoles: 8 Vacuum pump Safety device Control system: HOMAG HOMATIC 2000 / HOMATIC 2000 IPC* Software: HOMAG woodWOP 4.5 4th axis: C-axis / NC-controlled auxiliary axis*

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,380 mm, travel distance Z-axis: 250 mm, controller model: Xilog Maestro, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Working Area X-Axis: 3,680 mm Working Area Y-Axis: 1,380 mm Working Area Z-Axis: 250 mm Spindle Speed: 24,000 rpm Number of Working Zones: 2 Number of Adjustable Bars: 6, 1,300 mm Number of Pneumatic Bakelite Bars: 4 Number of Adjustable Suction Cups: 3 Front Tool Changer System: 10 positions Rear Tool Changer System: 16 positions Todpfxoydmbne Akijd F 12L Vertical Drilling Head Spindles: 8 F 12L Horizontal Drilling Head Spindles X-Axis: 2 F 12L Horizontal Drilling Head Spindles Y-Axis: 2 MACHINE DETAILS Electrospindle: 12 kW, HSK 63F Vacuum Pump: 250 m³ Control System: Xilog Maestro EQUIPMENT Tecpad Mobile Console Bar Worktable Laser Line for Virtual Zero Positioning on Y-Axis Prisma KS 5-Axis Vertical Electrospindle Tool Group Blades for Groove Cutting Pro-Speed Safety System Front Guard and Safety System Automatic Lubrication System

Condition: used, Technical data - 2 tandem worktables, each with 6 pneumatic clamping devices - Travel range, X-axis: 3,550 mm - Travel range, Y-axis: 1,800 mm - Travel range, Z-axis: 750 mm - Continuously swiveling A-axis - Swivel range, C-axis: 370° - Rapid traverse speed, X-axis: 100 m/min - Rapid traverse speed, Y/Z-axis: 60 m/min - 2 + 2 tool positions with collet chucks - Tool holder standard: EN 430E / DIN 6499 - Cylindrical tool holder - Collet chuck size: ER32, tool diameter 1-20 mm - Spindle speed: 2,000-18,000 min⁻¹ - 2 electric motor spindles, each with 7.5 kW power - Operating pressure, compressed air: 6 bar - Compressed air consumption: 300 Nl/min Tjdpfxszutrme Akied