Used coordinate measuring machines for sale (363)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Cjdpfx Aexyungeqvjri Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer DEVICE NEEDS TO BE RECONDITIONED PRIOR TO COMMISSIONING. Complete with MSC20 Encoded Stage Controller RL532C50 Codpfxjym Dt Hj Aqvsri HPNIR Laser Source A-9803-0625 CCD 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Condition: used, Year of construction: 2016, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 661351, measuring range X-axis: 275 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 300 mm, total height: 294 mm, type of input current: AC, total width: 77 mm, overall weight: 1 kg, input voltage: 230 V, table length: 122 mm, repeat accuracy: 0.02 mm, year of last overhaul: 2026, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, 1 Careful owner, approx 500 hours of usage. Current Calibration certificate dated Nov 2026. Comes with the following: Codpe Ahy Hujfx Aqveri HP ZBook 15 G3 Workstation Laptop - High specification laptop PC for use with Creaform Scanners. Windows 7 Pro 64bit 15" Display UHD Screen Intel i7-6700HQ 64GB DDR4 RAM NVIDIA Graphics Quadro M2000M 4GB 256GB SSD M.2 NVMe (approx. 600hrs powered) 500GB HDD (approx. 600hrs powered) VX Elements software installed. VX Remote 10 Inch Tablet 3D Scanner External Battery Bank- 72wh Handyscan 3D Scanning Turntable with bag Positioning Targets - Magnetic - Pack of 750 in metal tin Positioning Targets - Adhesive - Pack of 500 - box of 34 units (17000!) Scraper for targets - 1 unit Extra Spare USB 3.0 Cable for HandySCAN700 - 4 meters AESUB blue scanning Spray - 1 can Rugged Custom built freight case for Scanner box (18mm structural Plywood)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, TECHNICAL DETAILS Measuring range: 1,200 mm Standard: ISO 10360-2 MPEp: 8 µm MPEE: 5 + L/40 µm Travel range X-axis: 1,200 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 1,200 mm Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,200 mm MACHINE DETAILS Input voltage: 220 V Type of current: Alternating current (AC) Arm weight: 10.2 kg Total weight incl. transport box: approx. 20 kg Transport box length: 850 mm Transport box width: 550 mm Transport box height: 350 mm Last calibration: 01/11/2022 Notebook Model: HP ZBook Workstation Processor: Intel Core i7 RAM: 16 GB Graphics card: NVIDIA Hard drive: SSD EQUIPMENT PolyWorks Metrology Suite 2025 IR10.2 PolyWorks Inspector Probing Transferable USB dongle license Absolute encoder technology Integrated digital camera Integrated work light Haptic feedback Ergonomic handle Zero-G balancing weight Mounting plate TESA TKJ Probe with 3 mm ruby ball Probe with 6 mm ruby ball Probe with 15 mm steel ball Certified test bar for 1,200 mm measuring range Test bar length: 305 mm Calibration sphere Magnetic anchor Original transport case Crodo Afhr Tspfx Aqvji Dust cover B89 certificate Factory calibration documents Calibration certificate Testing documents

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,000 kg, total height: 2,730 mm, total width: 1,470 mm, total length: 2,000 mm, overall weight: 2,100 kg, table width: 880 mm, table length: 1,720 mm, table load: 1,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, Manufacturer: Mitutoyo, Model: Crysta-Apex V7106 CNC CMM, First commissioning: 2022, Regularly serviced by Mitutoyo according to maintenance schedule, last service in 2025. Measuring range (x/y/z): 700 / 1,000 / 600 mm, Crsdj Ah Rtfspfx Aqvji Measuring table made of granite; Dimensions of measuring table: 880 x 1,720 mm Maximum workpiece height: 800 mm Maximum workpiece weight: 1,000 kg Automatic, swiveling measuring head PH10MQME Plus (CM) SCR 200; Equipment/Accessories: Measuring head TP 200 PI-200-3 interface for TP 200 measuring probe Joystick box M2 Calibration sphere, ceramic PH10MQP R2 system Software: Mitutoyo MCOSMOS-1 CNC V4 Interface: Mitutoyo Q-DAS OUTPUT for transferring measurement data to the Q-DAS quality management and statistics system, Dell PC tower and LCD monitor, Weight of main unit: approx. 2,100 kg.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, type plate available, Very good condition, original software including hardware key. Renishaw measuring probe. Direct sale to end-users only. Price includes loading at the seller's location: Csdpfx Aszw Rpnsqvjri W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, workpiece weight (max.): 227 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Travel range X-axis: 440 mm Travel range Y-axis: 500 mm Travel range Z-axis: 410 mm Max. workpiece weight: 227 kg Table height: 930 mm MACHINE DETAILS Last overhaul: 2025 Last calibration and maintenance: 09/09/2025 Calibration and measurement protocols: available Operating manual: available on CD Dimensions & Weight Dimensions (L x W x H): 1,030 x 1,160 x 2,320 mm Total weight: 293 kg Input voltage: 220 V Input current type: Alternating current (AC) Csdpfx Aj Afhtqoqvjri EQUIPMENT PC-DMIS Pro for Windows Version 4.2 MR4 Release Software, legally transferable Renishaw MH20i measuring head with TP-ES probe system EM1 extension module, length: 70 mm TP20 SF probe module with standard probing force TP20 EF probe module with high probing force Functional HP computer Additional Renishaw Brown & Sharpe TP-ES measuring head, functional Several probe extensions Various probe tips The scope of delivery also includes a TESA Star-i measuring head and a Renishaw MIP measuring head. The TESA Star-i measuring head is defective. The Renishaw MIP measuring head is likely defective. However, the machine itself is equipped with the fully functional and even higher-quality Renishaw MH20i with TP-ES probe system and is therefore immediately ready for use.

Condition: used, Year of construction: 1995, • Air bearing in all axes • CNC control for 3 axes WPC • Standard geometry and free-form surface (current version) • PC system (NEW) • 2 x 24 “monitor (NEW) • PH10M / TP200 touch probe • Reference ball • Controller table Cjdpfx Aqe Ah Rh Ujveri software: WMIQUARTIS Measuring range: 1000 x 2,000 x 1,000 [mm] Measurement uncertainty: Eo = 3.3 + L / 300 [μm] Max. Component weight: 600 [kg] CAD interfaces: VDA, IGES, STEP Optional: CATIA, Pro-E, SolidWorks Options: Further software modules, button changers, accessories and clamping systems available on request. Services: Installation • Commissioning and accuracy inspection • DAkkS calibration certificate as required • Individual training • Packaging / transport / insurance

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 2,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 800 mm, total height: 3,000 mm, total width: 1,800 mm, total length: 3,200 mm, overall weight: 4,800 kg, Equipment: documentation/manual, - with RENISHAW PH 10 M probe - including accessories such as measuring tips, test specimens, etc. - including computer, monitors, keyboard and mouse Please note: does not include workbench or office cabinet Collection: the collection has to take place on a fixed date to be confirmed between 13.01. and 14.01.2027. FCA D-71364 Winnenden - loading in truck Crsde Ahg Nfspfx Aqvsi

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 200101521101, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, year of last overhaul: 2026, Equipment: type plate available, For sale is a ZEISS CONTURA 7/10/6 coordinate measuring machine (CMM) with a ZEISS VAST XT gold scanning probe system and a C99 control panel. The machine is located in Velbert (North Rhine-Westphalia) and was last calibrated in February 2026. Manufacturer: Zeiss Model: SYS CONTURA 7/10/6 Part number: 623564.9010.000 Serial number: 200101521101 Year of manufacture: 01/2001 Automatic probe changer, 5 positions Measuring software: ZEISS CALYPSO 2021 Version 7.2.08 Last major maintenance including calibration: 02/2026 by Zeiss Condition: used / operational Machine type: Coordinate measuring machine Crsdpfx Ajz Duv Ajqvji AVAILABLE FROM WEEK 08/2027 The dismantling and transport are to be organized by the buyer. PLEASE NOTE THE TWO ATTACHED DOCUMENTS IN PDF FORMAT. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 201305503797, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,150 kg, total height: 2,800 mm, total width: 1,750 mm, total length: 2,300 mm, overall weight: 2,500 kg, Equipment: documentation/manual, - Special equipment: with ZEISS VAST XXT measuring head - Weight: CMM: 2,310 kg - Max. workpiece weight: 1,150 kg - Travel speed: Creep speed: SLOW FUNCTION: 0–5 mm/sec - Set-up mode: MAN mode 0–70 mm/sec Crods Ahg Nbjpfx Aqvoi - For further technical data, see the photographed documentation - With accessories and documentationIncluding computer, monitor and keyboard Collection: the pick up has to take place on a date to be confirmed between 13.01. and 14.01.2027. FCA-D 71364 Winnenden - loading on truck

Condition: used, Year of construction: 2005, Purchase your coordinate measuring machine from the largest specialist in CMMs, with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been inspected, tested, and guaranteed to be ready for operation from A to Z – quality you can rely on. General machine data: Machine type: CRYSTA-Apex C544 Manufacturer: Mitutoyo Measuring range: 500 x 400 x 400 mm Control system: Mitutoyo UC-200 Software: MCOSMOS-1 V4 Equipment & accessories: Cjdpo Ahqvqjfx Aqvori Measuring head: Renishaw PH6M with adapter PAA1 Probing system: Renishaw TP200 Quick-change rack SCR200: optional, at an extra cost Included in the scope of delivery: Coordinate measuring machine CRYSTA-Apex C544 Measuring head Renishaw PH6M with adapter PAA1 Probing head Renishaw TP200 Not included: Quick-change rack SCR200 (optional, at an extra cost) Condition: Used, inspected, and functional machine from KMT stock, located in Leonberg. Processing: Inspection by appointment. We handle disassembly and loading; transport upon request. About KMT: Kneissl-Messtechnik is a specialist in coordinate measuring machines with 30 years of experience – offering DAkkS calibration services and optional installation and training.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 800 kg, total height: 2,730 mm, type of input current: AC, total width: 1,470 mm, total length: 1,700 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, overall weight: 1,675 kg, input voltage: 220 V, table width: 860 mm, table length: 1,420 mm, travel speed (max.): 300 mm/min, feed length X-axis: 8 mm, feed length Y-axis: 8 mm, feed length Z-axis: 8 mm, table load: 800 kg, compressed air connection: 6 bar, year of last overhaul: 2023, ambient temperature (max.): 26 °C, ambient temperature (min.): 20 °C, temperature: 20 °C, maximum load weight: 1,675 kg, Equipment: documentation/manual, type plate available, Mitutoyo Crysta Apex S776 Year of manufacture: 2020 Includes clamping table/system High-end scanning probe head!!!!! 6-position probe changer Crsdpfx Ae Ahytzeqvji Cabinet Vise Camera for recording the clamping situation Includes PC and monitor Calibration: 01/2023 Excellent condition, very few operating hours!!! New price: €76,600 (gross) The machine must be completely dismantled, loaded, and transported by the buyer at their own expense and risk! For sale to companies only!

Condition: used, Year of construction: 2004, Mitutoyo CRYSTA-Apex C7106 – used CNC coordinate measuring machine with a gantry design, professionally inspected and fully functional. The proven C-series from Mitutoyo stands for measurement stability on a granite base – ideal for precise 3D measuring tasks in the metrology lab. Technical data: - Measuring range: 700 x 1000 x 600 mm - Control system: UC-200H - Software: MCOSMOS-1 V4 - Probe system: Renishaw PH10M Equipment & accessories: - Renishaw PH10M rotary/tilting head - Renishaw TP200 probe system - Renishaw HCU1 hand control unit - Mitutoyo calibration certificate 08/2026 (WK-2060334-26) Crjdpfx Aqjz Tffnevji Included in the scope of supply: - Coordinate measuring machine CRYSTA-Apex C7106 - Renishaw PH10M rotary/tilting head - Renishaw TP200 probe system - Renishaw HCU1 hand control unit - Computer system with MCOSMOS-1 V4 - Mitutoyo calibration certificate 08/2026 Not included in the scope of supply: - Automatic probe changer / probe changing rack Condition: used, inspected – fully functional. Year of manufacture: 2004. Procedure: Inspection by appointment. Disassembly and loading will be carried out by us, transport on request. Location: Leonberg, Germany. Kneissl Messtechnik GmbH – your specialist for coordinate measuring technology with an accredited DAkkS calibration service. Installation, training, and instruction are optional.

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 200 mm, total height: 850 mm, type of input current: AC, total width: 720 mm, total length: 950 mm, overall weight: 54 kg, input voltage: 230 V, table width: 500 mm, table length: 500 mm, ambient temperature (max.): 30 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, type plate available, KEYENCE VL-570 Optical 3D Coordinate Measuring Machine The VL-570, from Keyence’s VL-500 series, is a 3D measuring machine that measures various shapes from the stripe projection image of the object, which is captured with a black-and-white CMOS camera. The linear light from the light source (stripe projection light) is projected onto the object at an angle using the projection lens. Measurement types that can be performed with the VL-570: 3D measurement, plane measurement, profile measurement, 3D comparison measurement, profile comparison measurement. The basic unit consists of: Cjdpfez Ihkbsx Aqvori - VL-500 control unit - VL-550 500mm base - VL-570 measuring head - VL-H2P comparison measurement module - VL-C2 cover - OP-88145 calibration plate Technical data: Repeatability: 2µm Measuring accuracy: 10µm Standard measuring mode (4M mode): 4 million measuring points Fine measuring mode (16M mode): 16 million measuring points Rotation mechanism: 360° Tilt mechanism: 45° Measuring range: Ø500mm x H 200mm User manual and quick start guides are included. New price: €52,350 (net) Upon request, the 3D coordinate measuring machine can be delivered within a 200 km radius of our company headquarters. Delivery costs will be agreed upon separately.

Condition: excellent (used), Year of construction: 2018, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, overall weight: 8,000 kg, For sale on behalf of a customer is a ZEISS PRO T advance 16/15 3D coordinate measuring machine. The machine is currently fully operational and connected to the power supply. Technical data and features: - Year of manufacture: 2018 - Operating hours: approx. 13,000 - Control system: ZEISS C99N - Measuring range: X 3,200 × Y 1,600 × Z 1,500 mm - Rotary-swivel joint: ZEISS RDS-C6 - 3D measuring head: RST-P - Ceramic probe ball, identification C02258-d - RDS probe changing magazine - 36-piece RST probe kit Cedpfxez Rmkyo Aqvori - Measuring software: ZEISS Caligo - PC workstation: HP Z440 G3 with Intel Xeon E5-1620 v4, 32 GB RAM and NVIDIA Quadro K2200 - Measuring table: solid special cast iron table, flatness according to DIN 876/II - Last DAkkS calibration: 02/26

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 88229, total width: 1,450 mm, total length: 2,100 mm, overall weight: 3,800 kg, table width: 1,000 mm, table height: 850 mm, table length: 2,100 mm, Equipment: type plate available, Coordinate measuring machine: Zeiss MC 850, 08/12/06, UHING Year of manufacture: 08/1990 Serial number: 88229 Control system: C99 Dongle available: Yes Software: Calypso 7.6.4 Measuring head: VAST XT – Good condition – PC included – New software + license – Everything packed for transport with original Zeiss transport securing devices (value of transport securing devices approx. €5500) X-axis as a longitudinally movable portal, 850 mm Y-axis cross slide in the portal, 1,200 mm Z-axis as a measuring head quill (vertical), approx. 600 mm Through-passage between the portal, approx. 1,000/1080 mm Through-passage in height, approx. 750 mm Overall table size, approx. 1,000 x 2,100 mm Table height above the floor, approx. 850 mm Machine height, approx. 3,050 mm Weight, approx. 3,800 kg Crjdpsz T T T Tsfx Aqvei The machine was in use until recently. Free loading.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,000 mm, Equipment: type plate available, For sale: Used Wenzel WP-KL coordinate measuring machine, year of manufacture 2007, in excellent condition and immediately ready for operation. This machine is ideally suited for quality assurance, toolmaking, and precision metrology applications. General Condition The machine is in very good technical and optical condition, professionally overhauled and modernized in 2022. On-site inspection is possible by appointment. Technical Data - Model: Wenzel WP-KL - Year of manufacture: 2007 - Serial number: LH075440 - Machine height incl. extended damper: 3,485 mm (retracted: 3,470 mm) Measuring Range & Accuracy - Measuring range (X/Y/Z): 1200 × 2500 × 1000 mm - Accuracy (MPE E): 2.6 + (L/300) Equipment - CNC control: WPC, 3-axis - Probe system: Renishaw PH10M - Scanning probe: Renishaw SP25 with scanning kit 2 (probe stylus lengths 50–100 mm) - Probe changer rack: Renishaw FCR25 with 3 ports, empty Credpfox H Tqiox Aqvei PC System & Software - PC system with Windows 10 Professional - 2 × 24" TFT monitors - WM QUARTIS CNC geometry software – Version 2025 - WM QUARTIS CNC freeform surface applications – Version 2025 - WM QUARTIS CNC CAD import interface (STEP) – Version 2025 - USB user dongle with software license Accessories (included) - Small M3 stylus kit - Reference sphere - PC and controller trolley with integrated desk - Ergonomic hand control panel HT400 If interested or if you have any questions, feel free to contact us! Price: €85,000 net, negotiable for quick completion. All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, overall weight: 579 kg, year of last overhaul: 2024, Equipment: documentation/manual, lighting, type plate available, Mitutoyo QVT1-X404P1L-D 3D CNC Multisensor Measuring Machine Enhanced application possibilities through the combination of tactile and non-contact measurement. Powerful CNC-controlled system for intelligent, simple, and fully automatic measurements. Multiple image processing filter functions ensure reliable results. Crjdpfxs Afdr Aj Aqvsi Flexible switching of probe tip configurations with the MCR20 probe head changer. White LED transmitted light. White LED coaxial light. Programmable 4-quadrant LED ring light. Triangular pattern focusing for low-contrast surfaces. Programmable magnification changer with 1x, 2x, and 6x magnification. High-resolution CCD black and white camera. Resolution: 0.0001 mm "One-Click Tool" technology for optimal edge detection.

Condition: excellent (used), functionality: unexamined, Equipment: documentation/manual, For sale is a comprehensive KEYENCE VL series optical 3D coordinate measuring system, including accessories, original packaging, and documentation. The scope of delivery, as visible in the photos, includes: * KEYENCE VL-750 * KEYENCE VL-770 * KEYENCE VL-700 * KEYENCE VL-A3D Crsdpfs Agu Iajx Aqvei * KEYENCE VL-C35 * KEYENCE OP-88145 * Calibration/reference plate in a transport case * Rotary table / measuring fixture * Cover or enclosure * Cables and other accessories * Original KEYENCE boxes and packaging materials * Operating manuals and documentation * License documents for VL-H3G GD&T Measurement Software * License documents for VL-H3R CAD Conversion Software * Other accessories as shown in the pictures The devices and components are in used condition. The exact scope of delivery can be determined from the pictures.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 94681, travel distance X-axis: 700 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, ZEISS PRISMO 5 3D coordinate measuring machine with VAST probing system For sale is a used ZEISS PRISMO 5 3D coordinate measuring machine, serial number 94681. The machine is equipped with a ZEISS-VAST probing system and a comprehensive multi-probe changer. A machine-side ZEISS control console is also included. Cjdpezwvk Refx Aqvori Additionally available is a cabinet with probes, which is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe inventory can be provided upon request. Machine data Manufacturer: ZEISS Model: PRISMO 5 Serial number: 94681 Probing system: ZEISS VAST Equipment: Multi-probe changer Condition: used ZEISS service and inspection marking The machine has a marking from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to an inspection according to DIN EN ISO 10360. Documented specifications: MPE(E0): 2.70 + L/250 P: 2.00 RONt: 4.40 Type: PRISMO 5 Serial number: 94681 Calibration date: 02/2025 The values stated are reproduced according to the ZEISS marking on the machine. ZEISS CALYPSO 5.8 is visible on the existing control PC. The exact scope of the license or the transferability of an existing software license is not part of this information and can be checked separately if desired. Optionally available In addition, there is the possibility of purchasing a separate cabinet with a comprehensive inventory of ZEISS probes and accessories. This cabinet is not included in the machine price and can be offered separately if desired. Condition and inspection The machine is in used condition. An inspection is possible after prior arrangement. The exact scope of delivery can be agreed upon or checked based on the available components if there is concrete interest. Errors, changes and prior sale are subject to change. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: used, Year of construction: 2010, functionality: limited functionality, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, total height: 1,680 mm, type of input current: AC, total width: 740 mm, input voltage: 230 V, table length: 750 mm, Equipment: type plate available, Machines works fluently apart from sprocket- which blokes and reqiures fixing. Credpjz Ditvofx Aqvsi

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 151255, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. Crjdpfx Aqoz Ebzbsvei The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: excellent (used), functionality: unexamined, Equipment: documentation/manual, type plate available, For sale is a comprehensively equipped KEYENCE VL series optical 3D coordinate measuring system for non-contact, three-dimensional acquisition and precise measurement of components. The system offered consists of several original KEYENCE system components and is offered as a complete package including extensive accessories, a calibration board, software data carriers, and original documentation. Existing KEYENCE system components: KEYENCE VL-770 KEYENCE VL-750 KEYENCE VL-700 KEYENCE OP-88145 – VL Series Calibration Board including the corresponding transport case Further scope of delivery and accessories: Light/shielding hood Original KEYENCE calibration board with transport case Software data carrier for the KEYENCE VL-700 Series Application Connection and cabling Extensive original documentation and technical documentation Software and license documentation Documentation for additional KEYENCE software modules, including: VL-H3R – CAD Conversion Software VL-H3G – GD&T Measurement Software Further accessories as shown in the images Functional demonstration The KEYENCE measuring system was switched on, and the corresponding KEYENCE VL-700 series application was started for demonstration purposes. The corresponding photos show the switched-on system and the running software interface. Important note: The notebook visible in some of the pictures is used solely for demonstrating the KEYENCE software and the measuring system. The notebook is explicitly NOT part of the offer and is NOT included in the scope of delivery. No binding statement can be made regarding the current calibration status and a complete metrological inspection of the system. Condition The offered KEYENCE 3D coordinate measuring system is in used, overall visually good condition. Signs of wear and tear due to age and use may be present. The exact condition and the complete scope of delivery can be seen in the attached pictures. Credpfx Aqe Agnf Asvji Inspection and collection Due to the size, weight, and sensitivity of the measuring system, collection is preferred.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 156521, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale. Cjdpozwwkxefx Aqvsri