1
Air Tapping Machine /Pneumatic tapping machine
For Tap M3-M16
Speed (rpm) 400
23cwtzrg2
Work Range Rmax 950 mm Rmin 100 mm
Weight 24 kG
Standard Accessories
- Pneumatic tapping Spindle
- Stretch arm
- Slanted arm
- Table mounting column
- Air unit
- Choose any six safety clutch tapping adapters
Skinpack machine, packaging machine, thermoforming machine, vacuum forming machine
B9jorw097r
-Manufacturer: Illig, skin pack machine type SK 74c
-Foil width: 540 mm
-Roller conveyors: each 1000 x 560 mm
-Work table: dimensions see photos
-total Motor output: 1.9 kW
-total Heating power: 8.9 kW
-Dimension: 3070/1710/H2520 mm 838 kg
-Accessories: incl. 8 foil rolls O290 x 540 mm 276 kg
-Transport dimension: 1710/1070/H2520 mm / 1200/800/H700 mm
-Total weight: 1114 kg
7
Air pillow packaging machine Air Space 9000
The machine creates air-inflated fillings from the foil sleeve.
230V power supply
Ca9bgyzwo9
Weight about 100 kg.
7
Rapid Air coiling machine.
Model: R56AP.
Serial no.: 71589.
Coiler outer diameter: 920 mm.
Coil inner diameter variable: 120-500mm.
Spare control box.
More coilers on stock: Soprem, ALO Teknik, Kohler, Bruderer, Rapid Air. As well servo feeders and used flash butt welding machines Ideal BAS 100, Ideal BAS 050, Ideal BAS 120...
Buw2roxszj
7
Speedypacker machine in fair condition, but in need of nozzle cleaning before use, due to stand-still for 6 months. Parts & tools required for this are included.
Enfoprz
Lots of extra spare nozzle units, tools, spare parts & cleaning equipment are included.
The machine has been in daily use until 2021, everything works, including electronics, motors, feed, bag seam welding, heat tubes & pump motors.
Before it can be taken in use again, standard maintenance of the nozzle unit must be performed,...
Discover more used machines
5
Thread cutter, tapping machine, tapping machine
-Manufacturer: Fein, tapping machine type ASg 648
-Rated consumption: 500 watts
-Max. Cutting capacity: M10
-Connection: 220 volts
-Dimensions: 500/240/H80 mm
-Weight: 4.4 kg
Mxbvek
Table threading machine
M1 - M10
Height adjustment via toothed rack and hand crank,
motor 0,22+032 kW
motor rpm 1420/ 2770
spindle Upm 480 - 580
Weight 100 kg
Tapping chuck with key
Under table
Connection cable with 16 A CEE plug
Bkwy9ex
4
Table drilling and thread-cutting machine FLOTT type TBZ 15 GL
Fabr. No. 32177027 built in 1986
Drilling 15 mm
Spindle retainer MK2
Throat depth 195 mm
Pinolhub 80 mm
Table size 275 x 200 mm
Column diameter 70 mm
Spindle speed 80-4500 RPM 18 steps
Motor power 0,55 + 0.75 kW
Power supply 380 v, 50 Hz
Bc9u38yiz2
-6 levels of belt from the motor and 2 levels of belts to the drill spindle 2 engine speeds
-3 piece guide cartridges 0.7 - 0.8 and 28 G available
-Drilling head height adjustment via cran...
7
thread dia. M20 - M52 mm
38 / 136 U/min.
Bqu9yqli
working area 320 - 1500 mm
engine output 1,3 kW
weight 42 kg
11
Tapping, threading tapper Drilling machine
Manufacturer: WMW, Heckert
Type: Mikromat
Adjustable height:: 450mm
Table: 470x580mm
Drilling-depth: 80mm
Spindelspeed: 630 rpm
Qgp82
5
serial number 1374
Qgepl
ja
ja
5
Thread cutter, tapping machine, tapping machine
-Manufacturer: Fein, tapping machine type ASsld 636
-Rated consumption: 180 watts
-Max. Cutting capacity: M6
-Speed: 450 rpm
-Connection: 220 volts
Fn8n27h
-Dimensions: 400/100/H80 mm
-Weight: 3kg
Tapping of M3 - M16
Drilling D 3-30 mm
Recording MK3
-Feed
Speed control (belt put around by hand)
-Speed: from 100 to 1120 RPM
Weight 280 kg
3xygcll0b
High current 16A
-Dimensions: approx. 1900x800x600mm
-Tischmasse about 400x550mm
12
High quality Airpad machine from a renowned European manufacturer. Suitable for the production of individually defined air-filled protective and filling elements made of PA and PE film. Low cost, as there is no need to use prefabricated films. No compressed air connection necessary.
-Different programs can be loaded.
-Use of half-tubular film with width 210 mm.
Gyvgko
-Selectable cushion lengths from 110 to 220 mm.
-A certain number of cushions per chain can be defined.
-A number of chains to be...
7
thread dia. M6 - M30 mm
58 - 205 U/min.
working area 320 - 1500 mm
Bqvjjv9j
engine output 0,85 kW
weight 36 kg
8
Format: A5 to A3
Cboqx93jnx
Equipment / Additional information:
1x Horizon tower MC-80a (8 stations)
M.No . 040043
1xHorizon MC-80 Air Pump
M.No .: 040043
6
Tapping capacity, min.: M 2
max. in steel up to 600 N/mm2
v = 8-12 m/min.:
metric thread M 8
metric fine thread M 12 x 1
Whitworth thread 5/16"
Whitworth pipe thread R 1/8"
max. in grey cast iron up to 220 HB
v= 10-15 m/min.
metric thread M 10
metric fine thread M 14 x 1
Whitworth thread 3/8"
Whitworth pipe thread R 3/8"
max. in brass or light metal
v = 25-30 m/min.
metric thread M 12
metric fine thread M 14 x l,5
Whitworth thread 1/2"
Whitworth pipe thread R 1/2"
Installed power kw 0,55
Chuck c...
8
Thread cutter, tapping machine, tapping machine
-Manufacturer: Fein, tapping machine type ASg 636
-Rated consumption: 280 watts
-Max. Cutting capacity: M8
-Speed: 450 rpm
-Connection: 220 volts
-Number: 2x tapping machine available
I3chmob
-Price per piece
-Dimensions: 330/150/H80 mm
-Weight: 2.3 kg
3
thread dia.:12 mm
threading length:60 mm
throat:95 mm
spindle turning speed range:1420 U/min
total power requirement:1,25 kW
weight of the machine ca.:47 kg
Gxkuj98fe
dimensions of the machine ca.:0,28 x 0,23 x 0,97 m
1
techn. data:
Thread cutting capacity
M6 in steel
Bz3hg903zg
M8 in cast iron
M10 in aluminium
Equipment:
Documentation
5
thread dia. M5 - M16 mm
250 U/min.
48 Nm
air pressure 6 - 8 bar
working area 150 - 1900 mm
The pneumatically driven D-JSC tapping machine has, among other things, one
Air motor with quick chuck and a stable and flexible
Labor arm.
The mounting arm can be attached directly to the work table using the mounting
flange
and is ready to work immediately. This means fast changeover times
guaranteed.
Hvm7vjh
It is possible to simply tap the tap to the desired hole
to be attached without having t...
6
working pressure: 6 bar
Ewbgcox
workpiece height max.: ohne Tisch: 350 mm
workpiece height max.: mit Tisch: ca.150 mm
foil width: ca.800 mm
cycle time: 32 sec
control: Siemens S5
voltage: 220 AC V / Hz
total power requirement: 119 kVA
weight of the machine ca.: ca. 9,5 t
space requirements of the machine approx.: L:11,0xB:6,0xH:4,8 m
THERMO FORMING MACHINE for vacuum forming and laminating of interior panelling in vehicle construction with films and textiles.
Additionally to this Machine a Lamin...
7
ETM arms are competitively priced electric tapping arms, equipped with Touch Screen, PLC control and variable speed control, available in M12 - M16 - M24 - M36
Electric tapping machine equipped with:
Touchscreen
PLC control
Variable speed control
Advantages:
Electric, more energy efficient than pneumatic machines
Very powerful servomotor
Produces significantly less noise than pneumatic machines
Easy to adjust pitch, depth and speed via touch screen
Can be used in horizontal and vertical position...
Tapping machine, drill press, drill press, tapping machine
-Manufacturer: Infratirea Oradea, threading machine type MFIV 8
-Clamping table: 450 x 355 mm
-Spindle mount: B16
- Projection: 200 mm
Gpac9hymy
-Speeds: from 180 to 1400 rpm
-Travel: 220 mm
-Spindle stroke: 50 mm
-Electric motor: 0.6 kW
-Number: 2x machine available
-Price per piece
-Dimensions: 870/680/H1835 mm
-Weight: 446 kg/pc
2
thread dia.:12 mm
threading length:40 mm
throat:160 mm
:200 mm
turning speeds:450 - 2200 U/min
Y7j2uttsk
total power requirement:0,37/ 0,3 kW
weight of the machine ca.:76 kg
dimensions of the machine ca.:0,60 x 0,28 x 0,70 m
5
Drilling capacity: 70 mm;
Tthn0sy
Spindle speed of rpm =: 35 rpm;
Spindle speed up to rpm =: 1238 rpm; Drilling depth: 300 mm;
Discharge: 630 mm; Table size L: 1040 mm; Table size B: 600
mm; Coolant pump: yes; electrical connection: 400 V;
Dimension L: 1200 mm; Dimension B: 1800 mm; Dimension H:
3400 mm;
7
thread dia. M3 - M16 mm
max. 187 U/min.
working area 180 - 1000 mm
engine output 0,7 kW
Bqvs02tk
weight 22 kg
- Offer number: 1/86
- Manufacturer: FILL TECK
- Type: FTK 400
- serial number: 00205
- up to 8m³ air cushion material per hour
- with separate and rollable material rewinder
- for film width of 420 mm
- operating voltage: 230V, 50 Hz
- operating air pressure: 7 bar
Ixcwkya3o
- dimensions L x W x H in mm: - machine 1250 x 1050 x 1500
- rewinder 700 x 660 x 1200
- weight approx.: machine 380 kg + reel 70 kg
- optical condition according to photos
- used
- functional, see videos:
Notes:
The g...
8
CNC linear boring and threading machine make IXION type PC 1-6000 BT 30 ST/GSE
year of construction 12/1999 for machining of long parts Masch. No. 240028
Technical data:
Continuous drilling capacity 30 mm
normal drilling capacity 35 mm
Tapping capacity up to M 30
spindle mounting MK 3
Spindle speed infinitely variable 160 - 2800 rpm.
throat 280 mm
drilling depth 150 mm
distance spindle to table 220-600 mm
rapid traverse 6 m/min
column diameter 120 mm
retraction accuracy +- 0,1 mm
table surface 3...
15
Drill, column drill, column drill, column drill, tapping machine, box column drill, tapping machine
-Manufacturer: IXION, tapping machine tapping machine type BT 15 GLV
-Equipment: with lead cartridge
-Motor: 0.65kW
-Speeds: 320 - 1600 rpm
-Table size: 285 x 220 mm, travel 240 mm
-Spindle mount: MK2
-Spindle stroke: 70 mm
- Projection: 200 mm
B8rawcdh8b
-Columns O: 75 mm
-Dimensions: 680/440/H1460 mm
-Weight: 133 kg
7
thread dia. M3 - M8 mm
Bh73yrsbzl
3
Thread cutter, tapping machine, tapping machine
Qliz3oq0i
-Integrated reversing gear: with fast reverse
-Nominal consumption: 230 watts
-Max. Cutting capacity: M6
-Connection: 230 volts
-Weight: 2.5 kg
7
thread dia. 12 mm
375 U/min.
working area 180 - 1000 mm
engine output 0,7 kW
Bh73y2dhnm
4
Thread cutter, tapping machine, tapping machine
Qlizs7lgh
-Integrated reversing gear: with fast reverse
-Nominal consumption: 280 watts
-Max. Cutting capacity: M8
-Connection: 230 volts
-Weight: 2.5 kg
9
thread dia. 12 mm
375 U/min.
working area 180 - 2000 mm
Benvszbbhl
engine output 0,7 kW
weight 28 kg
4
Taps, tapping machine, tapping machine
-Version: Integrated reversing gear with quick return
-Nominal: 280 watts
-max cutting performance: M8
Ckfqkzkm
-Connection: 230 volts
-Weight: 2.5 kg
5
thread dia. M6 - M22 mm
Hvwo07i
60/200 U/min.
105 Nm
air pressure 6 - 8 bar
working area 400 - 2000 mm
4
Thread cutter, tapping machine, tapping machine
-Integrated reversing gear: with fast reverse
-Nominal consumption: 230 watts
-Max. Cutting capacity: M6
Qlizjmfsg
-Connection: 230 volts
-Weight: 2.5 kg
5
thread dia. M10 - M33 mm
35/115 U/min.
0n3c3krj
320 Nm
air pressure 6 - 8 bar
working area 400 - 2000 mm
3
Thread cutter, tapping machine, tapping machine
-Integrated reversing gear: with fast reverse
-pneumatic: driven
Y2pxddhh
-Max. Cutting capacity: M6
-Weight: 3.5 kg
5
thread dia. M3 - M12 mm
400 U/min.
28 Nm
air pressure 6 - 8 bar
working area 150 - 1900 mm
weight of the machine ca. 12 kg
Pneumatic Tapping Machines for M3 - M12 thread, angle adjustable.
6 pcs. Keyless chuck with clutch.
optional:
Working table with T-slots: 750x600x650mm 990x700x800mm or.
Magnetic base.
Available up to max. M16, M22 and M33.
Ju92lq
4
Thread cutter, tapping machine, tapping machine
Wjyghqbk9
-Integrated reversing gear with fast reverse
-Nominal consumption: 230 watts
-Max. Cutting capacity: M6
-Connection: 230 volts
-Weight: 2.3 kg
10
thread dia. 16 mm
Jvlt7q
4 - 200 U/min.
working area max. 1000 mm
engine output 0,6 kW
weight 29 kg
4
Thread cutter, tapping machine, tapping machine
Noayn
-Nominal consumption: 280 watts
-Max. Cutting capacity: M8
-Connection: 220 volts
-Dimensions: 290/200/H60 mm
-Weight: 2.1 kg