Used Taps for sale (1,004)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: SN 018-0212, travel distance X-axis: 4,000 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 2,200 rpm, controller model: Penta-Tec, TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 580 mm Travel range Z-axis: 700 mm Speed range of drilling head: 140–2,200 rpm Drilling diameter: 3–32 mm Tapping range: M4–M24 Drive power of drilling head: 7.5 kW Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 6 m/min Positioning tolerance X-axis: ±0.1 mm Positioning tolerance Y-axis: 0.06 mm Positioning tolerance Z-axis: 0.06 mm Distance from top of table to bottom of tool holder: 700 mm Fpodpfxs Ah Eupj Aikjp Tool holder: SK 40 Tool changer: 10 tool positions T-slots: M12 MACHINE DETAILS Control system Control model: Penta-Tec Touchscreen: 18 inches Handheld unit: RCS01 Clamping system Manufacturer: Polund – Pro-Clamp Systems Number of clamping points: 8 Rated apparent power: 12 kVA Total weight: 6,000 kg EQUIPMENT Servomotors for X, Y, and Z axes Touchscreen control Automatic tool changer Automatic tool length measurement Handheld unit RCS01 Software extension for pendulum operation DXF software package Hydraulic draw-in clamping system with universal control Light curtain on the front Articulated belt chip conveyor

Condition: excellent (used), Year of construction: 2012, Soco Case / Carton / Box Taper Fully Stainless Steel Top and Bottom Tape Heads (removable) Mobile on lockable castors Manual side drive adjustment Manual top head adjustment Tape sizes 28mm to 48mm In excellent condition Fpodow Rr Dhepfx Aikop

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Fjdpfx Aoziu Hzjikjpp Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: used, Year of construction: 2002, functionality: fully functional, Tapping Machine HAGEN & GOEBEL type HG-6 Year of construction: 2002 Spindle travel: 50 mm External spindle cone: B12 Fpsdpfxsz Nxxys Aikjp Rotation: from 355 to 1800 RPM Rotation right / left Throat depth: 120 mm BILZ Quick Attach Voltage: 380 V Width: 400 mm Depth: 600 mm Total height: 800 mm Weight: approx 100 kg

Condition: new, Year of construction: 2022, FOR SALE – 1,091 NEW ANORD MARDIX DATABAR TAP-OFF UNITS We are offering a large stock of 1,091 brand-new Anord Mardix DATABAR tap-off units, designed for power distribution in data centers and other critical electrical installations. All units are new and unused. Some are supplied in their original cardboard boxes, while others are stored without individual packaging. Technical Specifications: * Manufacturer: Anord Mardix * Product: DATABAR Tap-Off Unit * Application: Data Center Power Distribution * Voltage: 415 V * Frequency: 50 Hz * Outlet configuration: 2 × 32 A, three-phase * Circuit breakers: ABB S203M C32 * Industrial sockets: MENNEKES * Busbar configuration: 5PA – L1, N, L2, E, L3 * Standard: BS EN 61439-6 * Protection rating: IP2X * Manufacturing date: December 2022 * Condition: New / Unused * Total quantity available: 1,091 units Stock Information: The complete stock is available from our warehouse in Rotterdam, the Netherlands. Units are available for individual orders, smaller batches, quantities of 100 pieces, or the complete lot of 1,091 pieces. Suitable for companies involved in data center infrastructure, electrical installations, power distribution systems, maintenance, and industrial equipment trading. Fede Agxdqjpfx Aikjpp Price: On Request Please contact us with your required quantity for a quotation. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Surplus stock – sold as is, where is, without warranty, claims, or returns.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, VOLUMEC Electric Tapping Machine Model: JT3750M EVO2 – Made in Italy Configured as follows: Balanced 3-arm jointed system made from special aluminum Adjustable angle head for tapping threads in any position Includes alignment magnet Fpsdpfsyia Txex Aiksp Brushless technology electric motor, 220 V Simple speed adjustment via potentiometer Quick-change holder, size 3 Table mounting column Technical documentation CE-compliant version Technical data: Tapping capacity in steel: M8 – M36 Speed: 10 – 150 rpm Max. working radius: 1,900 mm Holder: Size 3 Weight: 25 kg Including the following special accessories: VOLUMEC automatic lubrication system VOLUMEC touchscreen control VASTC Subject to errors and prior sale!

Condition: excellent (used), Soco Automatic Case Sealer / Box Taper Model T55 Fsdpfx Aehvr Afeikepp For random size boxes Top and bottom tape heads Adjustable height legs Complete with infeed and out feed gravity roller conveyors In excellent condition Delivery / Shipping can be arranged if you require this service

Condition: ready for operation (used), Year of construction: 2012, Wiemers AT 12 II Air Tapping Pneumatic Tapping Arm Thread Cutter Year of manufacture: 2012 Operating pressure: 6 – 7 bar Air consumption: approx. 750 l/min Thread size: M3 – M12 Description has been adopted as provided. You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID is supplied. Subject to prior sale. Visit our shop to see our full range of offers. Fpodpjymkrvofx Aikep All company names and trademarks mentioned are the property of their respective owners and are used only for identification and product description purposes. Please note that deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: excellent (used), Soco Case Sealer / Box Taper In excellent condition Top and bottom tape heads Manual side drives adjustment Fodpfx Aijzzl N Rjkspp Manual top head adjustment Three phase power Mobile on lockable castors

Condition: used, functionality: fully functional, Used TAPER TAP MACHINE, FAMUP (SERRMAC) MDR16. TAPER TAP MACHINE, SERRMAC WITH PEDESTAL COOLING SYSTEM AND TANK, USED. Fedpfxezht Izs Aikopp

Condition: good (used), overall weight: 70 kg, For sale is a comprehensive range of used threading chucks, tapping chucks, and associated tool holders from the accessories stock of a TOS WH 80 bench drill. Equipment: Threading and tapping chucks Various interchangeable holders and adapters Different clamping and holding ranges Fedpfs Ah Ri Sjx Aikjpp Extensive accessories as shown in the photos Used condition with age-related signs of wear The tools come from our company’s machine inventory. Preferably sold as a complete package. Inspection and assessment are possible by appointment.

Condition: excellent (used), Cutting range: M3-M10 in steel M3-M16 in cast iron M3-M18 in light metal and brass Spindle speeds: 120-240-180-360-300-600 rpm Includes 1 new tap chuck Fsdpoz Hk Ruofx Aikspp Everything works smoothly and well.

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS Fsdotnh Aljpfx Aikepp SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: good (used), functionality: fully functional, 1 x Drilling and threading machine WMW Heckert Mikromat Well-maintained machine with complete accessories + coolant pump Technical data: Spindle speeds: 90 - 710 rpm Fedpfxozzz E Io Aikepp (7 steps) Thread sizes: M6 - M30 Pitches: 1.0 - 3.5 mm The machine can be inspected while powered on.

Condition: used, Bench-top drilling and threading machine IXION, type BT 15 GL Machine no. Year of manufacture approx. 1975 Drilling capacity 15 mm Spindle mount Taper mount B 16 Fodpfx Ae Ah Ikcjikspp Threading range from M 2.5 to M10 Overhang 200 mm Quill stroke 90 mm Table size 285 x 220 mm Column diameter Ø 75 mm Spindle speed 320 - 1600 rpm, 4 steps Motor power 0.55 kW Mains connection 380 volts, 50 Hz - Spindle speed controlled via 4 V-belt steps - Equipped with FAHRION GH 10 threading chuck - With lead screw guide for thread pitch; operation without the lead screw guide is also possible - Height adjustment of the drilling head via hand crank - Column extends downwards from the table top for drilling head height adjustment Space requirement L x W x H 650 x 420 x 900 mm Weight 86 kg Good condition

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality Fpjdpfx Aijgq N Ezskep

Condition: good (used), - Pneumatic Motor GAMOR - Reinforced parallelogram structure made of hard aluminum - Table mounting column - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900 mm – min: 200 mm - Working air pressure: max 7 bar – 840 l/min - Weight: 18 kg The welding table is not included in the sale (as shown in the pictures), only the machine, which can be mounted again on a table or similar base. Transport and loading can be organized Europe-wide upon request and at additional cost. Prices plus VAT. Inspection possible by appointment. Contact us – our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Fpedpfs Ahqyxox Aikop Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please reach us via the contact form.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, ## 2021 Star SB-20R Type G – 20 mm CNC Sliding Head Lathe 7 axis | Twin spindles | Driven tooling | Guide-bush / non-guide-bush operation | FMB magazine bar feeder Available from Swiss CNC, this 2021 Star SB-20R Type G CNC sliding head lathe combines 20 mm bar capacity, twin-spindle machining and a versatile tooling platform for precision component production. Equipped with FANUC CNC control, it offers turning, milling, drilling, tapping and back-working capability within a compact machine layout. The 10,000 rpm main spindle and 9,000 rpm sub-spindle both feature C-axis control, supporting accurately positioned machining operations on the front and rear of the component. The fully independent sub-spindle allows front- and back-working operations to overlap where the component and programme permit, helping reduce cycle times and minimise additional handling. ### Guide-bush and non-guide-bush flexibility A key feature of the SB-20R Type G is its ability to switch between guide-bush and non-guide-bush operation. Guide-bush mode supports the material close to the cutting point, making it particularly suited to slender components and longer turned features. For shorter components, non-guide-bush operation can reduce bar remnant length and improve material utilisation. This flexibility allows manufacturers to adapt the machine to different component geometries and production requirements. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SB-20R Type G | | Year of manufacture | 2021 | | Maximum machining diameter | 20 mm | | Controlled axes | Seven: X1, Y1, Z1, C1, X2, Z2 and C2 | | Maximum headstock stroke — guide-bush mode | 205 mm | | Headstock stroke — non-guide-bush mode | Up to 2.5 × bar diameter, maximum 50 mm | | Main spindle speed | Up to 10,000 rpm | Fpedpez U Acmjfx Aikjp | Sub-spindle speed | Up to 9,000 rpm | | Sub-spindle chucking capacity | 20 mm | | Spindle positioning | C-axis control on both spindles | | CNC control | FANUC CNC | | Rapid traverse | Up to 35 m/min | ### Tooling capability - Gang-type turning-tool arrangement, with six 12 mm or seven 10 mm square turning-tool positions, depending on the fitted tool block. - Four front-working sleeve positions for end-working operations. - Cross-drilling and milling capability, with modular cartridge tooling configurations available for different machining requirements. - Four-position back-working station, supporting static or driven tooling according to configuration. - Independent sub-spindle movement for component transfer and rear machining. ### Included equipment - FMB Turbo 2-20 automatic magazine bar feeder for 3.2 m bar stock. - Filtermist FX mist extraction system. - LNS MH500 Turbo swarf conveyor. - FireTrace fire suppression system. - Selection of tooling and workholding. The supplied bar feeder, extraction and swarf-handling equipment provide a practical package for manufacturers looking to add automated 20 mm bar-machining capacity. ### Machine hours and availability Power-on and cutting hours to be confirmed. 2021 machines available in the UK, offered individually. Price on application, plus VAT. Delivery, installation and training available. Contact Swiss CNC for pricing, machine videos, inspection arrangements and further information.

Condition: excellent (used), Year of construction: 1982, TOYOSK 01B-T fixed spindle 12-spindle drilling machine Year of manufacture: 1982 Speed ​​(3 stages): 440 / 700 / 990 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs Tool holder type: spring/clamp chucks Fsdpfx Aiewh S E Uokopp Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: excellent (used), Year of construction: 1984, TOYOSK 01C550T Fixed Spindle Pitch 48 Spindle Tapping Machine Fjdpfxewifdge Aikopp Year of Manufacture: 1984 Speed ​​(3 stages): 450 / 700 / 1100 rpm Speed ​​Change: Mechanical (stepped stages) Spindles: 48pcs Tool Holder Type: Spring/Clamp Chucks Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Fpedpfx Aijwmnhpekop Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm Fedpfx Aijrt Unwskopp - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Condition: used, Year of construction: 2015, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 210054, tank capacity: 225 l, usable tank capacity: 200 l, total length: 800 mm, total width: 1,600 mm, total height: 1,020 mm, inner diameter: 1,498 mm, overall weight: 315 kg, wall material: stainless steel, wall thickness: 10 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 50 mm, manhole location: front, reception height: 250 mm, discharge height: 250 mm, operating temperature: 300 °C, operating pressure: 20 bar, input voltage: 230 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, The Firex Easybratt 200L Gas Variant (BM1G200I) is a heavy-duty industrial tilting bratt pan engineered for bulk cooking, braising, shallow frying, and boiling. While marketed in the 200-liter chassis tier, its precise volumetric breakdown consists of a 225-liter total geometric capacity with a 170-to-200-liter usable working capacity. The comprehensive breakdown of dimensions, weight, and utilities sourced from the manufacturer's technical specifications includes: 📐 Physical Dimensions & Cooking Vessel Overall Width: 1600 mm Fedpfx Aioz Ad Stekepp Overall Depth: 900 mm Overall Unit Height: 1020 mm (with lid closed) Vessel Internal Width: 1498 mm Vessel Internal Depth: 564 mm Vessel Internal Height: 250 mm Cooking Surface Area: 84 dm² 🏋️ Weight & Construction Details: Net Weight: 315 kg. Pan Base Thickness: 10 mm to 15 mm high-thickness compound steel for balanced heat distribution. Chassis & Tank Material: High-grade AISI 304 stainless steel throughout. Tilting Mechanism: This is a motorized model; the suffix is BM1G200I. Lid: Double-skinned, counterbalanced lid with spring loading to reduce heat loss and enable hands-free opening. 🔥 Gas & Burner Specifications: Total Gas Power: 40 kW. Burner Type: High-efficiency stainless steel multi-tube gas burners. Gas Connection Size: 1/2" inlet. Thermostatic Control: Micro-adjustable range between 45°C and 300°C Safety Features: Automated pilot valve safety shut-off; when the tank is tilted/lifted, burners drop down to a pilot-only mode and automatically re-ignite when lowered back into place. 🚰 Water & Electrical Supply Requirements Water Connection Size: 1/2" cold water inlet Water Supply Pressure: 50 to 300 kPa Water System: Integrated swivel water fill tap built into the top surface for automated pot filling and seamless cleaning. Electrical Feed: Requires a basic 230V / 1-phase supply solely to power the easy-light electronic ignition and internal control array.

Condition: excellent (used), functionality: fully functional, 1 x Thread-drilling machine Steinel BT 6.52 Fedpfx Aezk Iyqeikspp with coolant system + small vise Technical specifications: Max. thread size: M 6 (further technical specifications see photos) The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 1987, TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Speed ​​change: Mechanical (stepped stages) Fedpfx Aiewifd Hokopp Spindles: 12pcs For precision mechanics, small holes / threads. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)