Used hydraulic presses double column / four column presses for sale (200)

Condition: good (used), Year of construction: 1994, functionality: fully functional, operating hours: 25,000 h, pressing force: 400 t, table width: 1,250 mm, table length: 1,240 mm, table height: 1,125 mm, oil tank capacity: 3,400 l, total width: 3,500 mm, total height: 4,600 mm, installation height: 600 mm, Further images and technical data can be provided by email upon request. Sale is ex-location without warranty and return. Dismantling and collection must be carried out by the buyer. The press is standing at ground level without a base. We deliver the press media-free. The digital hours counter is no longer accurate. The manual counter shows approximately 25,000 hours. Dcodpfx Aovb D Trjixok

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Dcedogta Rcepfx Aixjk Automatic via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) Dcedempfwdepfx Aixek ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: new, column width: 2000 x 1000retracting speed: 150weight approx.: 35.000stroke: 800total power requirements: 30daylight: 1000rapid traverse: 120pressure: 500: 2500 x 1500working speed: 12messurements (LxWxH): 2500x2700x5400 Dedpfx Aed Aca Aoixsck

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 700 t, stroke length: 1,500 mm, overall weight: 50,000 kg, Equipment: documentation/manual, Press used for composites, until now it worked in Belgium. Dodswtbc Topfx Aixeck In July 2015 the press underwent a thorough modernization, the year of production of the device is 1990, however the modernization was very extensive. The press was used very little, it worked in a research institute. Due to the power cut, I could not check the mileage, but the device looks like new, there are no signs of wear of the working elements. The press is currently in Poland, 63-300 Pleszew, Poland. Pressure 700T. Dimensions of the upper foot 180x240. Foot stroke approx. 150cm. The press was used to develop the famous carbon space frame AUDI R8, it worked in a research and development institute near Brussels. Sometimes this device was also used for commercial production. The press looks practically like new. I have full modernization and technical documentation. The device was dismantled by me, in the sale price I add free assembly at the customer's, I will restore the device to the condition it was in before I dismantled the press. The buyer must provide a large forklift (approx. 44T), compressed air, and accommodation for 3 people for 14 days. I offer and pay for a team to assemble the device on site throughout Europe. It is very likely that the device will have to be configured for operation at the new buyer's, this task can be performed for an additional fee by a company from the Netherlands, which carried out a thorough modernization of the device in 2015, the estimated cost of such an operation depends on the buyer's requirements. The transport costs will be very attractive, because I have a friendly company that has very attractive delivery terms for me. The weight of the entire device is approximately 50T.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 63500 € 1200.15 € 70 to 500 mm 900x700 mm 600 mm 25 mm/s 6 mm/s 4 kW 1140 mm 940 mm 2350 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies Dodpoynnfpjfx Aixock € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 164500 € 3109.05 € 260 to 500 mm 1400x1000 mm 600 mm 75 mm/s 5 mm/s 60 mm/s 22 kW 2800 mm 1650 mm 2750 mm Dcedpfx Aisynm I Noxsk 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 123000 € 2324.7 € 170 to 500 mm 1200x700 mm 600 mm 110 mm/s 7 mm/s 70 mm/s Dcsdpfx Ajynm I Aeixjk 19 kW 2700 mm 1600 mm 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 78000 € 1474.2 € 85 to 500 mm Dsdpfoynm Ivex Aixsck 900x600 mm 600 mm 105 mm/s 7 mm/s 58 mm/s 7.5 kW 2250 mm 1150 mm 2400 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 71300 € 1347.57 € 60 to 500 mm 800x500 mm 600 mm 120 mm/s 8 mm/s 58 mm/s Dcsdpfx Aeynm Ipjixek 5.5 kW 1100 mm 1100 mm 2350 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 65000 € 1228.5 € 35 to 500 mm 800x500 mm 600 mm 125 mm/s 9 mm/s 68 mm/s 4 kW 1100 mm 1100 mm 2300 mm 4-pillar guide Dedpfsynm Iijx Aixock table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 103500 € 1956.15 € 150 to 500 mm 1250x1000 mm 600 mm 23 mm/s 4 mm/s 5.5 kW 1520 mm 1270 mm 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: Djdpfxjynm Ice Aixsck • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 74800 € 1413.72 € 100 to 500 mm 1000x800 mm 600 mm 26 mm/s 5 mm/s 4 kW Dsdpfjynm H Sox Aixeck 1260 mm 1060 mm 2400 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 104000 € 1965.6 € 125 to 500 mm 1200x700 mm 600 mm 115 mm/s 7 mm/s 70 mm/s Dsdpjwiqxpefx Aixeck 15 kW 2550 mm 1500 mm 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment

Condition: new, neu Dsdpfx Aowiq Aboixock ca. 4 Monate ab Auftragse Italien 132500 € 2504.25 € 200 to 500 mm 1250x1000 mm 600 mm 25 mm/s 3,5 mm/s 7.5 kW 1550 mm 1300 mm 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: new, neu ca. 4 Monate ab Auftragse Italien 172500 € 3260.25 € 300 to 500 mm 1250x1000 mm 600 mm 22 mm/s 2 mm/s 7.5 kW 1750 mm 1500 mm 2800 mm 4-pillar guide Dodpfx Aiewir Acjxock ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: like new (used), Year of construction: 2008, machine/vehicle number: 461/08, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 400 t, stroke length: 250 mm, operating speed: 320 mm/s, reverse speed: 280 mm/s, table width: 450 mm, table length: 450 mm, table height: 320 mm, ram plate width: 450 mm, ram plate length: 450 mm, distance table to ram: 450 mm, clearance between the columns: 540 mm, oil tank capacity: 400 l, total length: 1,370 mm, total width: 1,470 mm, total height: 2,900 mm, overall weight: 8,700 kg, The hydraulic press is as new. It has 5000 operating hours and has worked at minimal pressures with a maximum of 50 tons. It was regularly serviced by the manufacturer Energo. It is very precise with a pressing depth of 0.01 mm, and offers simultaneous program execution in multiple steps, where you can set the depth, pressure, and pressing speed. It is connected to the power supply and ready to operate. Dcodpfx Aiey E N U Usxsk

Condition: used, Year of construction: 2014, The portal-type hydraulic press is designed for bending or straightening, as well as for processing finished welded components, and for disassembling mining machinery and other equipment. It is used in mechanical, production, and repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of manufacture: 2014 Technical specifications: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of gate cylinder 1: 2 x 300 mm Diameter of gate cylinder 2: 2 x 250 mm Force of gate cylinders 1: 2 x 1768 kN Force of gate cylinders 2: 2 x 1228 kN Maximum clearance: 1240 mm Stroke of working cylinders: 600-660 mm Gate travel: 1420 mm Equipment: Djdpfx Aijhktq Aoxsck - two gates - table - four working cylinders - gate movement cylinder - working cylinder movement cylinder - power unit with T-100/30 pump (year 2006, overhauled in 2011) Technical condition: used, requires inspection.

Year of construction: 1990, condition: reconditioned (used), Hydraulic press - has 4 independent stroke / cylinders. Deep drawing process. Manufacturing of oil and fuel filters cans. Djdogcvfnopfx Aixjck The range of details is: Sheet thickness: 0.4-0.6 mm Material type - black or galvanized steel Can diameter: 68mm - 96mm Can length: 50mm - 180mm The entire control was replaced, including cabling, drivers, monitor, etc.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 6538, functionality: fully functional, operating hours: 20,242 h, pressing force: 163 t, stroke length: 500 mm, retraction force: 22 t, overall weight: 25,000 kg, actuation type: hydraulic, TECHNICAL DETAILS Ram Pressing force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Device Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling-Filter Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Stop Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Dcodpfx Aiexgt Tzoxek Tool breakage monitoring system Note: The seller strongly recommends a prior inspection of the machine, as the press cannot be removed from the hall in its assembled condition. If required, the seller can possibly arrange a specialized company for relocating the machine.

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Infeed motors: 2.6kW Dcsdpfx Astmugcsixok Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

Condition: ready for operation (used), functionality: fully functional, table width: 1,800 mm, table length: 2,700 mm, Complete hydraulic press in good working condition, with 12 plates with dimensions of 2700/1800 mm Dcedpsxzgpljfx Aixjk

Condition: excellent (used), functionality: fully functional, pressing force: 2,000 t, stroke length: 250 mm, table width: 1,000 mm, table length: 800 mm, 2000 tons hydraulic press 4-columns Table 800x1000 mm Stroke 250 mm Dcedpfjy Sz Rhjx Aixsk

Condition: excellent (used), table width: 700 mm, table length: 1,000 mm, LAUFFER PRESSES hydraulic press model VA 400 Dcjdpfx Aisy Szwnjxsk Capacity 400 tons Table 700x1000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe Dsdpfjy Uiyvjx Aixjck The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.