Hydraulic double column press
KK Kletzer Hydraulische Doppelständerpresse 150 to Sonderausf

Name: KK Kletzer Hydraulische Doppelständerpresse 150 to Sonderausf
Brand: KK Kletzer
Price: 125000 EUR
Availability: InStock

EXW ONO plus VAT

€125,000

Condition

New

Location

Austria

Hydraulic double column press KK Kletzer Hydraulische Doppelständerpresse 150 to Sonderausf

KK Kletzer Hydraulische Doppelständerpresse 150 to Sonderausf

Show map

Machine data

Machine type:: Hydraulic double column press

Manufacturer:: KK Kletzer

Model:: Hydraulische Doppelständerpresse 150 to Sonderausf

Condition:: new

Price & Location

EXW ONO plus VAT

€125,000

Location:: A - Niederösterreich

Call

Details about the offer

Listing ID:: A10883651

Reference number:: K00000839

Update:: 17.01.2026

Description

stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000
Capacity: 1500kN. (150 ton - at 245 BAR)

Operating selection: Via key switch

Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active)

Automatic via two-hand operation at full speed (with active light sensor fuse)

Main cylinder: Ø 270mm.

Auxiliary cylinder: 2 pcs. Ø 70 x 50mm.

Motor: 15kw. - 1500d/min. (IE-3)

Pump: 45cc. - 65Lt./min. REXROTH - axial piston pump

Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec.

Clearance: 1300mm.

Table top: 1200 x 800 x 90mm. - with T - grooves

ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing

Installation height: 600mm. (max. distance between table & ram plate)

Stroke length: max. 400mm.

Table height: 850mm. (Floor to table top upper edge)

-----

Hydraulics: (Hydraulic accessories on top of the press)

Kontrol Block & Valves (REXROTH Proportional Valves)

Prefill valve (NG.125)

8 way guide

Hydraulic ram safety device

Mechanical ram safety device for TDC position
Blodpfxempfwds Af Eoc

Pressure adjustment via PLC.

Speed adjustment via PLC.

Pressure stop valve for 600 sec.

Air cooler

Automatic lubrication for guides

Auxiliary motor

Auxiliary pump

Control system:

Main control box (mounted on the side of the press frame)

Pivoting control panel

SIEMENS S7 - 1200

KTP. 9 SIEMENS screen (language selection DE.- ENG.)

Safety PLC. (SICK)
Light sensor for front & back of work area (SICK 750 + 150mm.)
Soft starter
Two hand operation (Movable)
SECOMEA Ethernet connection
Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT)
Workspace lighting (2-fold IP-66)
8 free ON & OFF outputs on the PLC. for external connections
-----

Protective railing around the hydraulics
Lateral ladder
-----

Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.)
Hydraulics & control diagrams
Parts lists
CE. Certificate
Standard :EN.16092/1/3

-----

Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg.

Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey.

-----

Seller

Registered since: 2015

430 listings online

Call

Send inquiry

Telephone & Fax

+43 2743 ... show

These listings may also fit your interest.

Listing

HYDRAULIC DOUBLE COLUMN PRESS CAMP 250 TN

Cestona

1,214 km

HYDRAULIC DOUBLE COLUMN PRESS
CAMP250 TN

€9,500

fixed price plus VAT

Call

Condition: used, HYDRAULIC DOUBLE COLUMN PRESS CAMP 250 tn Double column press Pressing power 250 tn Stroke of the piston 500 mm Table size 570 x 570 mm Distance from table to piston 600 mm Distance between uprights 570 mm Approach speed 95 mm/seg Workin speed 7.5 mm/seg Bsdpfegr Ur Rjx Af Ejlc Retraction speed 135 mm/ seg Engine power 30 cv

See details

Listing

Sankt Peter im Sulmtal

1,823 km

Edge banding machine
OTTUNIKANT 202

Call

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: Blsdpjfbr S Rjfx Af Ejc • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

See details

Listing

Crane chassis with electric wire rope hoist 3200 kg Stahl** AS 3016-16 2/1

Wiefelstede

1,085 km

Crane chassis with electric wire rope hoist 3200 kg
Stahl**AS 3016-16 2/1

Call

Condition: good (used), Year of construction: 1999, Indoor crane, crane, electric wire rope hoist, hand trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, trolley, girder undercarriage, overhead track undercarriage -Manufacturer: Steel, crane chassis with electric rope hoist -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Traction drive: FA-C 3728 133-1 Bjdpfx Afstlzdqe Eolc -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Number: 2 crane trolleys available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/piece

See details

Listing

Double-column hydraulic press, tool try-out press, spotting press, 4-column press, hydraulic press SMG HBP 200 - 2000 / 2000

Hessisch Lichtenau

1,244 km

Double-column hydraulic press, tool try-out press, spotting press, 4-column press, hydraulic press
SMGHBP 200 - 2000 / 2000

€39,000

fixed price plus VAT

Call

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC Bljdpfx Aodzp Tcef Ejc - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

See details

Listing

Ulft

999 km

Flame cutting machine
FicepTIPO G25LG

Call

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Year of construction: 2019 With this line, the input and output is the following length: Input: 8M Output: 8M If you want more pictures or information please contact us. Blodpfxju Dw I Ej Af Eoc

See details

Listing

Mindelheim

1,445 km

Double miter band saw
MIOTAL®S 270 DG

Call

Condition: new, Cutting range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° R: 230 mm square 45° R: 220 x 220 mm flat 45° R: 230 x 150 mm round 60° R: 140 mm square 60° R: 140 x 140 mm round 45° L: 200 mm Bedpjiqt Rlsfx Af Ejlc square 45° L: 175 x 175 mm flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double mitre saw with swivel saw arm from left -45° to right +60° - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration work - With 2 saw blade speeds for optimum adaptation to the workpiece - Hydraulic lowering cylinder - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - CE/IEC, German documentation and German service Scope of delivery: - BiMetal band saw blade 2925 x 27 x 0.9 mm - Band tension adjustable via pressure gauge - Carbide guides - Quick-clamping vice - Material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut - Underframe

See details

Listing

Production press Stenhof STENHOJ LPSP 100T

Wilfersdorf

1,831 km

Production press Stenhof
STENHOJLPSP 100T

€35,000

ONO plus VAT

Call

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Blodpfog Rn Efsx Af Ejc Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs.

See details

Listing

Demag System 500/900-3300 (2006) Demag System 500/900-3300

Trenčianske Stankovce

1,890 km

Demag System 500/900-3300 (2006)
DemagSystem 500/900-3300

Call

Condition: excellent (used), Year of construction: 2006, Clamping force: 500 t Screw diameter: 80 mm Platten dimensions: 1300 x 1200 mm Distance between tie bars V: 900 mm Distance between tie bars H: 900 mm Shot volume: 1779 cm3 Bedpfx Ajva H Amof Eelc Shot weight: 1620 g Injection pressure: 1855 bar Working hours: 46.511 Type: Horizontal Drive: Hydraulic

See details

Listing