Used Pantograph for sale (37)

Condition: like new (used), Year of construction: 2020, operating hours: 1,254 h, load capacity: 1,200 kg, lifting height: 3,350 mm, fuel type: electric, mast type: triplex, construction height: 1,740 mm, Manufacturer + model: TOYOTA SWE 120 XR * EX * Miretti 2G / Zone 1 * Mast: 3F3350 ID: 26101.5804 Category: Used Mast: 3F3350 Lowered height: 1740 mm Lifting height: 3350 mm Capacity: 1200 kg Year: 2020 Hours: 1254 hours Capacity: Complete NEW * 24v / 225ah * Year of manufacture 2026 Options: VERY unique COUNTERBALANCE stacker!! * EX * MIRETTI - E11399 System / Certificate = AR 17 ATEX 073 Gas group = IIB Type = Cat 2G (allowed in ZONE 1 and 2) Temperature class = T3 Equipped with: - Triplex FFL = Full Free Lift Podpfx Acoz E Sf Dj Aegt - Mast tilt - Pantograph - Side battery change system - With CANTILEVER adjustable forklift forks - Suitable for all types of pallets POWER STEERING

Condition: like new (used), Year of construction: 2018, operating hours: 183 h, load capacity: 1,200 kg, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,200 mm, Options: VERY unique CONTRA stacker!! Fully equipped! Features: FFL mast = Full Free Lift, side shift, mast tilt, pantograph, extra wide fork carriage; width = 1230 mm, blue spot & strobe light, lateral battery change system, with cantilever adjustable forklift forks, suitable for all types of pallets, power steering, complete and LIKE NEW! Pgsdpfx Aozuubisc Ast

Condition: like new (used), Year of construction: 1999, machine/vehicle number: P9970, functionality: fully functional, operating hours: 8,000 h, input voltage: 400 V, type of input current: three-phase, pivoting range: 360 °, rip fence adjustment: CNC-controlled, rotational speed (max.): 18,000 rpm, rotational speed (min.): 12,000 rpm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, ANDREONI PROGRESS 20 – Automatic, robotic engraving pantograph Year: 1999 CNC controlled! 20 workstations, 200 mm cutter spacing, pneumatic workpiece clamping. High-power spindles, 1.1 kW. The machine is in excellent condition due to moderate use. Pedpfx Acjzltxus Ajgt The manufacturer is still in operation and is located in Milan (Italy). Numerous tools included. Conveyor belt for chip removal.

Condition: good (used), VERTICAL PANTOGRAPH FOR ALUMINUM AND PVC MANUAL HANDLING WITH LEVERS Pgedjuh Da Hopfx Ac Aet NR. 2 WORKPIECE CLAMPING PISTONS DIME FOR COPYRIGHT

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; Pgsdeygxc Ajpfx Ac Aot - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Condition: used, Special pantograph for milling children's bed legs. Psdpfx Asy S Aclec Ajgt Foot-operated head movement, pneumatic piece movement.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 6,938 h, load capacity: 4,000 kg, lifting height: 4,000 mm, free lift: 550 mm, fuel type: diesel, mast type: simplex, construction height: 2,860 mm, fork carriage width: 1,300 mm, fork length: 1,150 mm, empty load weight: 7,000 kg, total length: 4,550 mm, drive type: Diesel, construction width: 2,170 mm, Side loader Load center: 700 Fork width: 125 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 27x10-12 Rear tire type: Pneumatic Rear tire size: 27x10-12 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in stock at our Hamburg and Gdansk locations. Visit our website – sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to purchase your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this HX40/14-13.5/40ST. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and custom construction of forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale. Pantograph: 1,350 mm Heater, full cab Pedpfx Ajz Ewdrsc Aogt

Condition: used, Year of construction: 2013, machine/vehicle number: 448582, overall weight: 991 kg, load capacity: 1,700 kg, Internationaler Transport möglich/ International delivery available Psdpfsxvv S Sex Ac Aegt Internationaler Transport möglich/ International delivery available

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels Pgodpezzz Rdefx Ac Aot - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 18,985 h, load capacity: 7,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,320 mm, drive type: Diesel, Side loader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Pgjdpfx Aezvtu Dec Ast Technical condition: good Description: Pantograph Heater, full cabin

Year of construction: 2017, condition: used, functionality: fully functional, empty load weight: 1,180 kg, load capacity: 8,000 kg, construction width: 1,200 mm, Pantograph Podpsz Ewhdofx Ac Ajgt Load center: 600 Condition: Ready for use and fully functional Technical condition: very good Description: Fork carrier: 540 mm Fork carrier: 540 mm Fork carrier: 540 mm

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; Pgodpfoucl Dcex Ac Ast *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Condition: excellent (used), Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, trolley, monorail trolley, pantograph trolley, cable trolley -Manufacturer: Vahle, pantograph wagon -Type: SWN 4/40 HS -Item No.: Dimensions: see photos -Number: 5x pantograph cars available - Price: per piece -Dimensions: 200/55/H130 mm -Weight: 0.5 kg/pc. Pgodozht Dijpfx Ac Aot

Condition: excellent (used), Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, trolley, monorail trolley, pantograph trolley, cable trolley -Manufacturer: Stemmann, pantograph car -Type: K70/KSL 25A 500V Psdpfjzhug Ssx Ac Aegt -Item No.: Dimensions: see photos -Quantity: 1x pantograph car available -Dimensions: 150/50/H130 mm -Weight: 0.3 kg

Condition: like new (used), mileage: 5,324 km, fuel type: diesel, STANDARD EQUIPMENT 4 ground support plates Aluminium basket: dimensions 1400 x 700 x 1100 mm Automatic closure of the aerial part Command from the basket for acoustic warning Engine start/stop command from the basket C o n s o l f o r b a s t a n d f o r g o u t o f f o r c h a s Electric hour meter Cross control of open/closed stabilizers Automatic disengagement of power take-off Multi-axial device for visual control of the frame stabilization (bubble) Hydraulic system with differentiated filtering with high efficiency filters on both the delivery and return lines Manual emergency pump 230V electrical socket in the basket; Hydraulic basket rotation 90° + 90° Turret rotation 700° SAFETY DEVICES AS STANDARD Intelligent anti-collision arms - cabin Seat belt attachments on the basket Manual controls for emergency lowering Remote control, from the basket, of starting or stopping the engine and the vehicle horn. I n t e r b l o c c o s t a b i l i z a t o r i / a b r e a s Magnetic rotating flasher for the vehicle cabin SOCAGE SRL Via della Chimica 23, 41012 - Carpi Modena (Italy) P.Iva: 00370270365 3 4 Magnetic rotating lamp on the cabin Ladder for climbing onto the basket "Intelligent" cabin anti-collision sensor (without bypass activation) Frame flatness sensor (electronic inclinometer) Aerial part centering warning light Automatic stabilization from frame controls and from the basket Cataphoresis treatment with powder coating Flanged block valves Painting of the arms and pantograph transmissions: white RAL Pedswbg Htjpfx Ac Aegt 9016 Frame painting: black RAL 9005 Painting heads and cylinders: blue RAL 5015 Socage warranty: aerial part 12 months Truck warranty: manufacturer's Hand pump for emergency descent Thermal protections on the electrical system Emergency stop buttons Flanged block valves on all cylinders Maximum pressure valves on the hydraulic system

Condition: good (used), machine/vehicle number: 16526, pattern table size: 320 x 440 mm working table size: 200 x 300 mm working area longitudinal: 250 mm working area cross: 220 mm spindle turning speed range: 1460 - 8550 rpm Pedpfxjdlkwge Ac Ajgt milling proportion: bei 1 : 1 ca. 105 x 165 mm spindle drive: 0,86 kW space needed: 1000 x 900 x 1320 mm weight: 360 kg

Condition: used, Year of construction: 2000, 2000 SAOM T55 CNC pantograph used, not tested, as seen and liked. Pgjdpox Ttxgjfx Ac Ajt Working dimensions of full bench: cm. 250 x 130 Working dimensions of bars: Cm. 250 x 130

Condition: used, Year of construction: 2011, functionality: fully functional, power: 56 kW (76.14 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total height: 1,800 mm, total length: 4,800 mm, total width: 2,150 mm, Equipment: documentation/manual, Artiglio carriage with a Artiglio headrig for sale. Carriage is equipped with 3 Independent knees, positioning done by servo motors. Program for cutting and manual dimension setup done through a touch display for ease of use. Carriage forward and reverse movement controlled by pedals, carriage is driven by an on board hydro motor. Turning, clamping and manual knee positioning done with joysticks. Cables and hydraulic hoses are ran to carriage through a pantograph. Schematics and user manuals in digital and printed format. Carriage and headrig have been removed, cleaned Pgjdpfx Acsy Anp Eo Ajt and some restoration work done after removal. Condition wise everything is fully functional just visual wear. Currently packed, stored in a warehouse and ready for shipping. Carriage: Model - NIBBIO 1000 Length - 4.8 m Width - 2.15 m Height - 1.8 m Longitudinal speed - 0-130 m/min Maximum side opening - 1000 mm Upper jaw opening - 800 mm Distance between wheels - 1260 mm Tow rope type - S10AR Towing rope diameter - 14 mm Overall length of towing ropes - 41 m Central tank capacity. Hydraulics - 120 l Longitudinal drive - 20 HP ONBOARD HYDROSTATIC Year - 2011 Headrig: Model - ST/I 130 Main motor power - 56 Kw Total weight - 4750 kg Flywheel diameter - 1300 mm Year - 2011

Condition: excellent (used), Pantograph with 2 controlled axes, ideal for machining aluminum, PVC, and steel profiles up to 2 mm, with the option to process stainless steel (optional). The work cycle is managed through intuitive software that guides the operator with simple instructions on the touchscreen display. The USB connection allows for easy linking to a PC. The four-sided rotating worktable ensures very high precision by using shorter tools, thus avoiding through machining and the resulting issues of vibration and noise. It is equipped with a quick tool change system with ISO 30 taper. A retractable, pneumatically operated guard protects the operator during machining. Pgodpjzz Szgjfx Ac Ast

Condition: good (used), Pantograph Milling / Engraving Machine Stock number: 3098 Manufacturer: Scripta Machine number: Type / Model: SR 300 Travel range x-y-z: mm Pgsdpfsy H Hhbox Ac Aet Pattern table / working table: 600 x 400 // 600 x 250 mm Speed range: 700 to 18,000 rpm, stepless Transmission: 1 : 1.33 to 1 : 10 Accessories/equipment: Font sets; others (see pictures) Power requirement: kW Condition: good Weight: 0.7 t

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Pjdpfougpwnsx Ac Ajgt Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, functionality: fully functional, machine/vehicle number: TKL51216737, Year of construction: 2021, operating hours: 535 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 2,903 mm, fork carriage width: 1,300 mm, fork length: 1,800 mm, empty load weight: 2,445 kg, drive type: Diesel, construction width: 2,280 mm, Truck-mounted forklift Chassis number: TKL51216737 Load center: 600 mm Fork width: 125 mm Fork thickness: 40 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Pneumatic Front tire size: 23x8.5-12 Rear tire type: Pneumatic Rear tire size: 27x10-12 Description: The unit has been visually and technically refurbished. Maintenance including drive and engine oil replaced. UVV inspection renewed. Pgjdpfx Acjy H S H No Ajt Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, road approval (STVZO), CE certificate, safety light, interior mirror, exterior mirror, beacon, pantograph, 3-wheel design, seat,

Condition: used, functionality: fully functional, machine/vehicle number: 09173442, Year of construction: 2017, operating hours: 887 h, load capacity: 2,500 kg, lifting height: 2,800 mm, fuel type: diesel, mast type: duplex, fork length: 1,800 mm, empty load weight: 2,100 kg, drive type: Diesel, Truck-mounted forklift Chassis number: 09173442 Load center: 600 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good Front tires type: Pneumatic Front tires size: 23x8.5-12 Podpfx Aexwft Ijc Aegt Front tires condition: 60 - 80% Rear tires type: Pneumatic Rear tires size: 27x10-12 Rear tires condition: 80 - 100% Description: Machine has been visually and technically reconditioned. Maintenance including replacement of drive & engine oil carried out. UVV inspection renewed. Side shifter, hydraulic scissor reach, third valve, rear work light, front work light, roof cover, CE certificate, exterior mirror, rotating beacon, pantograph.

Condition: excellent (used), Year of construction: 2006, CNC WORKING LINE FOR DOOR FRAMES, comprising: 1 HORIZONTAL LOADING TRANSFER MOTORIZED, model 0190 T.C Loading buffer with horizontal transversal belts and motorized rollers with variable speed control. 1 gasket insertion unit on a horizontal groove, consisting of: - 2 motorized gasket roll holders - 1 pressure roller insertion unit - 1 cutting unit positioned near the end of the profile 1 cutting/drilling machine for finished cuts, model 01TFRD SPECIAL, referencing the upper workpiece. Suitable for cutting, drilling, milling, and hinge (anuba) insertion on door jambs. MACHINE CONFIGURATION: Worktable constructed of a solid steel frame, with a fixed left section and a movable right section. Electronically controlled positioning system, supporting a total of 6 machining units: 2 on the right, 2 on the left, and 2 on the upper bridge. 1 CENTRAL MOTORIZED SHUTTLE with CNC control for milling the ends of jambs. 1 HORIZONTAL RADIAL CUTTING STATION, 0-45°, quick tilting with selector, featuring 2 groups (one per side). Each side with its own motor, including a timed entry system to prevent double cutting positions. Cutting motor power: 5 HP – 3000 rpm – inverter-controlled. Cutting blade bore: 30 mm. Saw blade diameter: 370 mm. Adjustable extraction hoods and safety guards. 1 HORIZONTAL HEAD DRILLING STATION 0-45°, fast vertical tilt with selector, with 2 groups (right and left). 2 HP motor, 3000 rpm. 7-spindle drilling head with 32 mm pitch. Individually selectable spindles. Groups travel on linear guides for increased speed and drilling accuracy, with longitudinal and vertical adjustment capability. 1 UPPER VERTICAL ROUTING (PANTOGRAPHING) STATION, on a transverse bridge, with 1 motor for counterplate slotting, 2 HP, 12,000/18,000 rpm. Vertical, horizontal, and depth (x-y-z axis) movements are CNC-controlled, utilizing precision linear guides and recirculating ball carriages. Equipped with tool holder collet. Psdsygcmfepfx Ac Ajgt 1 HORIZONTAL ANUBA DRILLING STATION, with 1 CNC-positioned motorized unit moving in conjunction with the router. Includes a drilling unit, custom Anuba inserting unit, and custom Anuba feeder with approx. 35 piece capacity (depending on Anuba diameter). 1 LINE CONTROL COMPUTER Capable of importing data (CSV or ASCII) via MMC (Memory Card). Note: The imported data will be used for automatic positioning and execution of processing steps as per the job list. Workpiece dimensions: Minimum length: 580 mm (45° internal for frame) Maximum length: 3000 mm (45° external for frame) Minimum thickness: 30 mm Maximum thickness: 60 mm Minimum width: 75 mm Maximum width: 300 mm

Condition: good (used), Code: 0409 Brand: THEOREMA Model: BR 3000 SPECIAL - CE Standard CNC boring and pantograph working centre with 3 controlled axis for furniture, kitchens, bathroom furniture, panels, doors and miscellaneous - CE standard Technical data: Minimum overall dimensions Useful length X axis mm 3000 Useful length Y axis mm 1300 X axis speed mt/min 24 Y axis speed mt/min 24 Z axis stroke mm 65 Max panel thickness mm 65 Boring unit with n° 18 spindles - Right-left drill chuck diameter mm 10 - Rpm 4000 Pantograph with pneumatic tool release - Motor Hp 7,5 - Rpm 0/18000 - Inverter for spindle Kw 5,5 Nesting worktable Suction cups mm 150 x 150 Pgodpsuwdnxsfx Ac Aet Rapid panel positioning Optimisation of the drilling path Specularity of drilling and milling cycles Interpolation on three X-Y-Z axis Vacuum pump cubic metres 100 Compressed air atm 6 Overall dimensions: mm 4400 x 1700 x 2400 h Weight kg 1200 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED