Condition: good (used), Year of construction: 2011, Maximum grinding diameter 290mm, maximum grinding length 800mm, grinding wheel size 290mm x 63mm bore. Control Fanuc 21i-TB, workhead speed 1,000rpm, spindle power 5Kw, table swivel +6/-3.5 degrees, workhead swivel angle 0-90 degrees. internal spindle motor 1.5kw. Fjlotudfdsquyupopg fitted with coolant.

Condition: good (used), Year of construction: 1990, operating hours: 8,587 h, machine/vehicle number: 6581/90-09, Drying system especially for sensitive workpieces with deep, small holes in which desiccants get stuck. Fpjlqsrntydouyupeg Stainless steel wire mesh belt, Belt length: 3765 mm Drying tunnel length: 2000 mm Belt width: 600 mm Passage height 250 mm Max. heating capacity: 22.5 kW (adjustable) Circulation rate up to: 3000 m³/h and up to 150 °C Dimensions: L3765 x D 1000 x H 1325 mm.

Year of construction: 2008, Condition: good (used), Müller SEL 2000 edge sanding machine. Used to grind 45 degree edges on workpieces. Fpolquyelzgnkoupeg

Condition: as good as new (ex-display), table length: 500 mm, table width: 300 mm, Flat grinding machine Ziersch Z35 - demonstration machine unused - Grinding area: 500mm x 350mm Dresser Permanent magnet Belt filter system with magnetic separator Fpolevvwf Djquyupeg

Year of construction: 1968, Condition: good (used), TECHNICAL DATA: X axis: 500 mm Y axis: 200 mm Z axis: 250 mm Table size: 200 x 600 mm Equipment features: incl. fixed magnetic plate, various grinding wheels. Good technical condition, without defects ready for immediate use. Lifting cylinders were resealed 08/2023 and scraped image set on the guides. The machine can be tested under power. There is another identical machine with the following equipment: Without magnetic plate, various grinding wheels, Diaform extractor, defects: - Spindle bearing grinding wheel 0.008mm play, stands out on the grinding pattern - Left safety catch missing Folquon Tpr Isyupepg

Condition: repair required (used), Year of construction: 1977, Functionality: not functional, Data : Tip width 600 mm Seat height 135 mm . - 3 additional flanges Fpelquyusv N A Drspsg - various new grinding wheels . Condition : The machine is not connected ! Scope of delivery according to enclosed pictures. For the machine : Condition unknown ! .

Condition: good (used), Year of construction: 1998, machine/vehicle number: 2183, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, workpiece weight (max.): 300 kg, total height: 3,250 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, table width: 380 mm, table length: 600 mm, table load: 300 kg, overall weight: 4,500 kg, travel distance W-axis: 450 mm, Object type: CNC jig grinding machine Manufacturer: HAUSER Type: S35-400 Year of manufacture: 1998 Machine number: 2183 Condition: Good condition, still in production Delivery conditions: Free on truck Availability: Immediately (by arrangement) Location: Baden-Württemberg Can be viewed under power: Yes Technical specifications: • Control system: GE Fanuc Series 16-M • Tool holder: EX 19 collets or E19 grinding arbors • Travels X- / Y- / W-axis: 500 / 300 / 450 mm • Feed rate X- & Y-axis: 0 – 2000 mm/min • Feed rate W-axis approx.: 900 mm/min • Table dimensions: 600 x 380 mm • Max. table load: 300 kg • Grinding spindle speed (infinitely variable): 9,000 – 60,000 rpm • Z stroke speed continuously variable 0.5 – 14,000 mm/min • Extinguishing system • Further technical data – see images Scope of delivery: • Grinding motor 60S (9,000 – 60,000 rpm) – see separate images • Extraction system • Coolant system • Dressing turbine Fslquyuswakqyjpopg • Existing manuals • The clamping devices shown in the images and the currently installed grinding motor are not included! Dimensions & Weights: • Installation dimensions L x W x H approx.: 4250 x 4000 x 3250 mm • Weight approx.: 4500 kg If you have any questions or would like to view the machine, please feel free to contact us. Additional information: The tool changer is out of order – according to the previous owner, it was never needed anyway! • We can offer transport to the destination upon request. ... • The offer price is net and excludes VAT. • The goods are sold without any warranty! • The goods are sold exclusively to businesses! • Technical data is subject to change. • Subject to prior sale.

Condition: good (used), Grinding wheel max. 300 x 40 x 76 mm left fine + right coarse grain Motor 1.5 kW Speed 1500 rpm Dimensions: W 460 x H 960 mm (grinding shaft) Felquyusvq Icispopg Stand not original Total weight approx. 140 kg Connection cable with CEE 16 A plug

Condition: good (used), Year of construction: 1977, Functionality: fully functional, grinding length: 550 mm, grinding width: 250 mm, ELB SWN 6 Compact surface grinding machine, built in 1977, overhauled in 1997 by Geibel+Hotz Homberg/Ohm. Ready for operation, still under power during production. Fjlquyevk Utheupopg

Condition: ready for operation (used), Functionality: fully functional, grinding width: 240 mm, type of input current: three-phase, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Main cutting edges up to 25° Fpslquyusufcnqopeg Motor 1, 1 kW

Condition: good (used), Year of construction: 1969, Saw blade grinding machine, tool grinding machine, grinding machine, circular saw blade sharpening machine, saw blade sharpening machine Fpslorgtfcjquyupeg -Manufacturer: Loroch, saw blade sharpening machine type SW with dust extraction -Saw blade diameter: approx. 50 to max. 470 mm -Whetstone: Ø 150 x 1.5 x 30 mm -Individual components: see photos -Dimensions: grinder 630/430/H1080 mm / suction H700 mm -Total weight: 141 kg

Condition: new, Year of construction: 2025, Functionality: fully functional, total width: 2,650 mm, total length: 4,640 mm, total height: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, overall weight: 1,200 kg, input voltage: 400 V, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, grinding width: 950 mm, grinding belt speed: 25 mm/s, grinding belt length: 9,000 mm, extraction connection diameter: 180 mm, power: 5.5 kW (7.48 HP), grinding belt width: 150 mm, height adjustment type: electric, grinding length: 2,500 mm, motor speed: 1,435 rpm, input frequency: 50 Hz, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts Folsv S Sr Rjquyupopg - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housing in "light gray" The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: good (used), Year of construction: 1994, Functionality: unexamined, machine/vehicle number: 3516, grinding length: 600 mm, grinding width: 230 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 230 mm, workpiece weight (max.): 100 kg, feed rate X-axis: 24 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, grinding wheel diameter: 300 mm, table length: 600 mm, table load: 100 kg, table width: 200 mm, grinding wheel width: 32 mm, spindle speed (max.): 3,300 rpm, spindle speed (min.): 800 rpm, overall weight: 3,500 kg, grinding spindle motor power: 9,500 W, Equipment: documentation/manual, rotational speed infinitely variable, Object type: Surface grinding machine Manufacturer: JUNG Type: JC 500 CNC-A Year of manufacture: 1994 Machine number: 3516 Condition: Good condition Delivery conditions: Free on truck Availability: Immediately (upon request) Location: Magdeburg Technical specifications: • Control system: Siemens Sinumerik • Table clamping area: 600 x 200 mm • Grinding path (X-axis): 600 mm • Grinding path (Z-axis): 230 mm • Grinding path (Y-axis): 400 mm • Maximum table load approx.: 100 kg Fpolquyujwalcwopjg • Grinding wheel dimensions (outer diameter x width x inner diameter): 300 x 32 x 76.2 mm • Table feed (X-axis): 1-24 m/min • Table feed (Z-axis): 2000 mm/min • Grinding head height adjustment (Y-axis): 2000 mm/min • Grinding spindle drive, continuously variable: 800 – 3300 rpm – max. power 9.5 kW Scope of delivery: • Manuals included • Magnetic clamping plate • Dressing device with included accessories • Coolant system • Extraction system Dimensions & Weights: • Installation dimensions L x W x H approx.: 4000 x 2500 x 2100 • Weight approx.: 3500 kg If you have any questions or would like to arrange a viewing, please feel free to contact us. Additional information: The machine was recently dismantled; it was fully functional until recently in operation at a renowned tool manufacturer. • Upon request, we can offer transport to the destination. • The quoted price is net and excludes VAT. • The goods are sold without any warranty! • The goods are sold exclusively to businesses! • Technical data is subject to change without notice. • Subject to prior sale.

Condition: good (used), Year of construction: 1963, Functionality: fully functional, machine/vehicle number: 2885, Automatic grinding wheel infeed, automatic cross adjustment, Table longitudinal movement hydraulically or manually, Wet grinding device, Fpslqerk Rcgouyupjg electromagnetic clamping plate, accessories Sanding length: 500 mm sanding width: 200 mm Max. workpiece height: 250 mm speed 2800 rpm Clamping surface: 600 x 200 mm Total power requirement: 3.7 kW Machine weight approx.: 1.6 t Operating instructions with circuit diagrams Machine can be demonstrated

Year of construction: 1988, Condition: good (used), Cover SOE graver-grinder with projection gauge . Accessories : collets , various grinding wheels. Good working condition. Fjlquysg Nw R Neupopg

Condition: used, Dear Sir or Madam ! Below we offer without engagement: Make : Hartex Designation : Cylindrical grinding machine Type : RH 1020 Technical data : Fpslquyjbabg Eoupjg Tip height 165 mm Grinding length 1020 mm Power 5,7 kW Weight 3,3 to. (further technical data on request) Please let us know if you are still interested in purchasing such a machine. If you are looking for other objects, or if you yourself intend to sell, we also ask for your non-binding information. If you are interested, we would like to hear from you. With kind regards, signed. Andree

Condition: good (used), Made in Germany - min. bore: 6 mm - max. bore: 50 mm - max. grinding length: 80 mm - max. clamping diameter: 235 mm - distance spindle / table center: 145 mm Felqoda A Eisuyupepg - spindle speed: 640 und 1000 rpm - swivel angle from spindle to one side: 10° - max. table speed, hydraulic adjustable:: 12 m/min. - max. distance spindle / grinding device: 550 mm - power consumption: ca. 8 kW - weight: 2000 kg

Year of construction: 1989, Condition: good (used), Cover SOE graver-grinder with projection gauge . Accessories : collets , various grinding wheels. Good working condition. Felqog Tmdmsuyupjpg

Year of construction: 1987, Condition: good (used), 1 used steel grinding machine, make Solid, type DSCD Folqeglf Hbjuyupepg

Condition: new, Year of construction: 2025, with suction automatic sanding belt centering tool-free sanding belt change sanding belt 2000 x 150 mm surface sanding range 500 mm belt speed 15/30 m/s weight 120 kg Felockk Rioquyupjpg motor pole-switchable 2.2/3.75 kW suction motor 0.37 kW machine dimensions 950 x 430 x 1050 mm scope of delivery: incl. sanding belt grain 60 dust bag 1 year guarantee delivery: free of charge including packaging (Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 1964, Condition: good (used), Cover SOE graver grinder with projection gauge . Accessories : collets , div.grinding wheels. Good working condition. Fslquyusi Hlhnepjpg

Condition: good (used), Year of construction: 1970, Magnetic surface: 1250 x 400 mm Fpslqusvt A Hhoyupog Grinding area: 1250 x 500 mm Dimensions LxWxH: 3700 x 1600 x 2500 mm Machine weight: approx. 4500 kg

Condition: good (used), Year of construction: 1988, Lid SOE graver-grinding machine year 1988 . Accessories : Collets , Good working condition. Fjlquysuqv Naeupspg

Condition: new, Year of construction: 2025, - belt length: 2000 mm - belt width: 75 mm - surface grinding area: 600 mm - belt speed: 15/30 m/s - colour: RAL 9007 - belt motor: 400 V 3,0/3,75 kW - suction capacity: ca. 630 m³/h Felqusbb R N Ijyupepg - suction motor: 0,37 kW - dimensions LxWxH: 1100 x 550 x 1035 mm - weight: 105 kg

Condition: good (used), Magnetic table 455 x 170 mm digital display Fpjlquyujtu Il Tjpog water tank Honing device Wet sanding device