Used surface grinding horiz. 0-399mm grind. length for sale (37)

Condition: good (used), Year of construction: 1994, completely overhauled in 1994 Table length: 450 mm Table width: 180 mm Execution: Hydraulic Maximum distance between table and spindle center: 400 mm Longitudinal travel (X-axis): 550 mm Cross travel (Y-axis): 200 mm Automatic vertical feed Grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Grinding wheel speeds: from 2800 rpm Digital display Weight: 1,000 kg Nksdpfx Agsw R Tl Hsnsu

Condition: used, Jones & Shipman 540P Surface Grinder. Power Rise & Fall Super Condition. Digital Readout. 18 x 6” Magnetic Chuck. Machine has been previously rebuilt. 415V Supply. *For sale with Jet Machinery Ltd* Jet Machinery Stock Number: 79065 Machine Serial Number: CMT 1043 £4,500.00 + VAT Nsdpfxoyaqpze Agnoku Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: as good as new (ex-display), Year of construction: 2025, GT 25 – The OPTIMUM Premium NC Grinding Machine with Siemens Touchscreen. • Electromagnetic chuck for securing the workpiece, with automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle with premium precision bearings • Grinding wheel can be dressed directly on the machine with an integrated dressing device • Digital position display • Machine base made of stable, torsion-resistant cast iron for maximum rigidity and stability • Longitudinal, cross, and vertical axis guideways are backlash-free and self-centering, designed as V and flat guideways • Precision ball screws • Central lubrication for guideways and feed screws • All flat guides are finely scraped, guaranteeing maximum precision in all manual movements • Safety electronics with 24 V DC • Large, decoupled handwheels on all three axes • Hydraulic lines according to DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all standard steels • Swivel control panel makes operation significantly easier • Separate hydraulic unit with heat exchanger prevents vibrations and thermal loading • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption, providing substantial cost savings Technical Data: Dimensions and Weights Length approx. 2300 mm Width/Depth approx. 1600 mm Height approx. 1675 mm Weight approx. 1700 kg Electrical Data Total connected load: 3 kW Supply voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Surface Grinding Table Length: 254 mm Width: 508 mm Grinding Wheel(s) Outer diameter: 200 mm Width: 20 mm Bore: 31.75 mm Peripheral speed: 33 m/s Spindle Speed: 2850 rpm Radial runout accuracy: 0.005 mm X-Axis Feed speed: 5 – 25 m/min Packaging unit: 1 Scope of Delivery Unit: Piece Packing unit: 1 Digital position display Coolant system Balancing arbor Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetization function Features Nksdpfx Ajymdwfsgnsu Electromagnetic chuck Table splash guard enclosure Automatic demagnetization device Parallel dressing device 40 W coolant system LED work lamp Leveling feet

Condition: as good as new (ex-display), Year of construction: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen. • Electromagnetic clamping plate for securing the workpiece, featuring automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle equipped with premium precision bearings • The grinding wheel can be dressed directly on the machine using the dressing device • Digital position display • Machine base made from stable, torsion-resistant cast iron for maximum rigidity and stability Nkodpsymduqsfx Agnsu • Guideways for longitudinal, cross, and vertical movements are backlash-free and self-centering, designed as V and flat ways • Precision ball screw drives • Guideways and feed screws with centralized lubrication • All flat guides are hand-scraped, guaranteeing the highest precision for all manual movements • Safety electronics with 24 V DC voltage • Large, decoupled handwheels on all three axes • Hydraulic lines compliant with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all common steels • Swiveling control panel for greatly simplified operation • Separate hydraulic unit with heat exchanger to prevent vibrations and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption and provides substantial cost savings Dimensions and Weights Length approx. 3600 mm Width/Depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical Data Total connected load: 7.5 kW Supply voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping area length: 400 mm Clamping area width: 800 mm Grinding Wheel(s) Outer diameter: 350 mm Width: 40 mm Bore: 127 mm Peripheral speed: 27 m/s Spindle Speed: 1450 rpm Run-out accuracy: 0.005 mm X-Axis Feed rate: 5 – 25 m/min Standard Features • Digital position display • Coolant system • Balancing arbor • Grinding wheel, grit 46 • Diamond dresser • Operating tools • Manual oil pump • LED lamp • Electromagnetic clamping plate • Demagnetization function Equipment • Electromagnetic clamping plate • Table enclosure with splash guard • Demagnetization device • Parallel dressing device ✔ • Coolant system 125 W • Working light: LED lamp • Leveling feet ✔

Condition: as good as new (ex-display), Year of construction: 2025, GT 30 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Sanding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3200 mm Width/depth approx. 2200 mm Height approx. 2100 mm Weight approx. 3000 kg Electrical data Total connected load 6.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 300 mm Clamping surface width 600 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Scope of delivery Nksdpfx Aeymdtyegnju Unit of measure: piece Packaging unit: 1 Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Automatic demagnetizing device Parallel dressing device ✔ Coolant device 125 W Work light LED lamp Alignment feet ✔

Condition: good (used), Year of construction: 1981, functionality: fully functional, grinding length: 500 mm, feed length Y-axis: 200 mm, grinding height: 300 mm, spindle speed (max.): 3,700 rpm, overall weight: 1,600 kg, input voltage: 400 V, space requirement length: 2,090 mm, space requirement width: 1,320 mm, Surface grinding machine with automatic feed Nksdpeynk Duefx Agnou

Condition: good (used), Year of construction: 1981, functionality: fully functional, grinding length: 500 mm, feed length Y-axis: 200 mm, grinding height: 412 mm, type of input current: AC, spindle speed (max.): 3,700 rpm, overall weight: 1,600 kg, grinding spindle speed: 3,700 rpm, power: 7 kW (9.52 HP), input voltage: 400 V, disc diameter: 225 mm, space requirement length: 2,090 mm, space requirement width: 1,320 mm, High precision grinding machine wth automatic feed Nsdsynk A Dspfx Agnsku

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding wheel diameter: 200 mm, disc diameter: 200 mm, We are offering this well-maintained Tecno Wasino Meister G3 surface grinding machine, year of manufacture 2004. Grinding wheel diameter: 200 mm Additional spindle – see picture If you have any questions or need more information, please feel free to send us a message or give us a call. Nkodpfoylv Uasx Agnsu

Condition: ready for operation (used), Hand-lever Surface Grinding Machine - HAAS UHS FL - Grinding length: 350 mm - Grinding width: approx. 180 mm - Grinding height: 250 mm - Grinding movement via hand lever - Swiveling range (horizontal): 360 degrees Nkjdpjyk Dq Tofx Agnju - Tilting range (vertical): +- 15-20 degrees - General angle adjustment - Spindle speed: 2500 / 5600 rpm - Drive power: 1.1 kW Dimensions: LxWxH 1.2x1x1.7 meters / Weight 700 kg Subject to errors and input mistakes

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 340 mm, grinding width: 170 mm, total height: 730 mm, total length: 930 mm, total width: 780 mm, The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum removal rate: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Nksdpfoxb Uq Dsx Agnsu Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm T-slot of worktable: 1–12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Lateral feed handwheel increment: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine structure. The grinding head operates smoothly. Compact design and low noise emissions. A working enclosure is available separately. The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately. PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

Condition: used, Year of construction: 1973, grinding length 600 mm Nkodpoyfwx Tsfx Agnsu grinding width 250 mm workpiece height 500 mm table surface area 600 x 200 mm dimensions of grinding wheel 220 mm table height over floor 1000 mm grinding spindle speed 1400 / 2800 U/min total power requirement 2,0 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,4 x 1,2 x 1,9 m

Year of construction: 1960, condition: used, Surface grinder with magnet 250 x 135 400 Volt power 1,8 kw Nkedpfsiuz Tgsx Agneu

Condition: used, Year of construction: 1979, Surface grinding machine ABA FFK, No. 791144, year of manufacture 1979, weight 740 kg, clamping surface 150 x 350 mm, working area 350 x 300 x 150 mm Nkodpfx Agsyhqr Senju

Condition: good (used), Year of construction: 1984, Machine is in good working codition. Nedpfoxvikuox Agnsku

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, total height: 1,800 mm, total length: 2,250 mm, total width: 1,400 mm, feed rate X-axis: 25 m/min, grinding wheel diameter: 205 mm, table length: 500 mm, type of input current: three-phase, table width: 250 mm, grinding wheel width: 19 mm, spindle speed (max.): 2,900 rpm, overall weight: 1,350 kg, grinding spindle motor power: 1,500 W, rotational speed (max.): 2,900 rpm, grinding spindle speed: 2,900 rpm, power: 1.5 kW (2.04 HP), grinding wheel speed: 2,900 rpm, input voltage: 400 V, disc diameter: 205 mm, Metallkraft FSM 2550 Surface Grinder Nksdpfx Agov Iq Shenou Machine Type: Surface Grinder with NC Controlled Vertical Feed Year: 2018 Control: NC Control Condition: Very Good Includes NC Controlled Vertical Feed Table Enclosure Guard Electro-Magnetic Chuck Wheel Dresser Coolant Equipment Halogen Light DRO Auto-Lube Technical Specifications Grinding Wheel Diameter: 180 to 205mm Grinding Wheel Width: 19 to 13mm Grinding Wheel Bore: 31.75mm Spindle Speed: 2900rpm Table Dimensions: 500 x 250mm X Axis Travel Speed: 5-25m/min Drive Motor Power: 1.5kW Electrical Connection: 400V/3Phase/50Hz Machine Dimensions: 2250x1400x1800mm Machine Weight: 1350kg

Condition: new, The HFS 3063 F Advance is a remarkable addition to the Conventional Surface Grinders category, designed for optimal performance within the Grinding Machines product group. This KNUTH machine exemplifies robust engineering with a cast-iron frame that offers superior rigidity and exceptional machining quality. It features precision guideways lubricated via a central system, ensuring reliability during operation. With an extensive standard equipment package, including a magnetic clamping plate with a built-in demagnetizing function and a Siemens PLC control system with a user-friendly touchscreen, the HFS 3063 F Advance enhances operational efficiency. Moreover, its electronically controlled hand-wheel allows for accurate spindle movement. Customers seeking a solution that bridges conventional grinding and CNC automation will find that this machine meets their needs seamlessly. Whether you're considering installation or the right accessories, speaking with our team can provide clarity on how this model can elevate your operations. Request a quote for the HFS 3063 F Advance today to benefit from advanced surface grinding technology. Nkjdpfx Agowub Tuensu

Condition: as good as new (ex-display), Year of construction: 2024, High-quality spindle with precision tapered roller bearings Hardened and ground table guideways Turcite-B coated counter guides for high wear resistance and low friction Integrated grinding wheel removal device Machine base made of sturdy, torsion-resistant cast iron for maximum rigidity and stability Backlash-free V-flat guide in the Z-axis and flat guides in the X- and Y-axis Trapezoidal threaded spindle in the Y-axis Manual central lubrication All flat guides are finely scraped, guaranteeing high precision of all manual movements LED lamp Safety electrics with 24 V DC voltage Sanding accuracy: 0.005 mm Grit 46 corundum grinding wheel for all common steels included as standard Two-channel safety electrics Nedpew Eay Ijfx Agneku EMC filter class Significant energy savings thanks to IE3 motor Coolant system with external coolant tank Dimensions and weights Length approx. 1970 mm Width/depth approx. 1300 mm Height approx. 1700 mm Weight approx. 850 kg Electrical data Power drive motor 1.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 200 mm Clamping surface width 500 mm Grinding wheel(s) Outer diameter 200 mm Width 20 mm Bore 31.75 mm Peripheral speed 33 m/s Spindle Speed 2850 min¯¹ Concentricity 0.005 mm X-axis Feed speed Manual

Condition: ready for operation (used), Year of construction: 2005, grinding length: 400 mm, grinding width: 200 mm, capacity 400x200MM, manual table, magnetic chuck, external electrical cabinet Nkodpfxjxc Ivco Agnju

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, grinding wheel diameter: 150 mm, jaw width: 70 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to company closure. Submitting a bid commits you to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Magnet dimensions: 500 x 200 mm Grinding wheel diameter: 150 mm Jaw width: 70 mm Nkedpfx Agsxqb D Aeneu MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,500 x 1,600 mm Weight: 700 kg EQUIPMENT Matching workbench with sine magnetic chuck Various grinding wheels Precision vise

Condition: used, Year of construction: 2012, workpiece . workpiece diameter 15 -70 mm swing diameter max. 150 mm clamping length max. 500 mm Swing over bezel area 70 mm dimension 150 x 300 mm max. turning speeds 250 min/-1 longitudinal adjustment manuell über Kettenrad Fixed tip MK 4 (Junker D75 mm) clamping capacity ü. Hydraulik einstellbar travel -z axis max. 1000 mm feed z - Achse (CNC gesteuert) dimension D 205 x 450 mm flange diameter D 190 mm standards association D 127 mm drive 30 kW speed control mit Frequenz- Umformer max. turning speeds 4400 min/-1 type Borazon (CBN) o. Diamant mm diameter 450 mm bore D 127 mm peripheral speed max. 90 m/sec type GR-3520-NR mm diameter range D 20 - D 35 mm dimension D 80 x 250 mm flange D 100 standards association D 75 drive 1,8 kW Nedpfxjx H Andj Agnoku max. turning speeds 24000 min/-1 weight of the machine ca. 7,0 t In our opinion, the machine is in good condition and can be inspected under power by appointment. There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 6190, grinding wheel diameter: 150 mm, table length: 720 mm, table width: 200 mm, overall weight: 2,000 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obligates you to collect the machine on schedule between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 720 x 200 mm Grinding wheel diameter: 150 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Nedexqg E Sspfx Agneku Rated current: 15 A Control voltage: 220 V Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 1,700 mm Weight: 2,000 kg EQUIPMENT Magnetic chuck (450 x 200 mm) RSF three-axis digital readout BRAILLON magnetizing and demagnetizing station JUNG adjustable magnetic chuck (120 x 90 mm)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6360.16.65, Country of manufacture: Switzerland Voltage: 380/400/50/3 Net weight: 1350 kg Customs tariff number: 8460.1920 Dimensions: 200/120/160 cm TECHNICAL SPECIFICATIONS Maximum saddle travel: 530 x 220 mm Maximum grinding surface: 520 x 230 mm Table clamping surface: 600 x 200 mm Table speeds Longitudinal, standard operation: 0-25 m/min With slow feed: 5/10 mm - 8 m/min Cross feed: 0-6 m/min Vertical travel by hand: 330 mm Nodpfx Agew Ucxqjnsku Rapid travel by motor: 290 mm Rapid feed rate: 460 mm/min Max. distance between table and spindle axis: 412 mm Vertical feed movement Handwheel, 1 division: 0.01 mm Micrometric device, 1 division: 0.001 mm Automatic: 0.001-0.099 mm With pulse button: 0.001 mm Cross feed movement Handwheel, 1 division: 0.01 mm Micrometric device: 0.001 mm Grinding wheel Diameter x width x bore: 225x25x50/51 mm Standard RPM: 2700 rpm With variable speed drive: 3700-1300 rpm All technical data are provided without guarantee and are subject to possible errors or omissions.

Condition: used, Year of construction: 2004, grinding length: 300 mm, grinding width: 150 mm, total height: 1,700 mm, total length: 1,400 mm, total width: 1,000 mm, grinding wheel diameter: 200 mm, table length: 400 mm, table width: 150 mm, spindle speed (min.): 2,800 rpm, grinding spindle speed: 2,800 rpm, power: 1.5 kW (2.04 HP), disc diameter: 200 mm, Surface grinding machine, SIEMENS Simatic OP17 control, magnetic chuck 300x125 mm, grinding wheel dresser, coolant system, various grinding wheels Njdpfx Ajxx Th Aognjku

Condition: used, Year of construction: 1976, grinding length: 350 mm, grinding width: 150 mm, total height: 2,150 mm, total length: 1,200 mm, total width: 1,100 mm, grinding wheel diameter: 175 mm, table length: 400 mm, table width: 150 mm, spindle speed (min.): 2,800 rpm, grinding spindle motor power: 750 W, power: 0.75 kW (1.02 HP), Surface grinding machine, SONY digital readout, manual and automatic feed, manual magnetic chuck 350x150 mm, grinding wheel dresser, coolant system Nksdpfx Agexq Abionou

Condition: good (used), Year of construction: 1980, grinding length: 400 mm, grinding width: 150 mm, Jumag surface grinding machine (Jung) JM 400 Year of construction: 1980 Sanding length: 400 mm Sanding width: 150 mm Clamping area: 400 x 150 mm Nsdpfotmtnasx Agnjku GR. Distance to table grinding spindle. 400 mm Grinding wheels: 200x 16 x 50.8 mm Table longitudinal feed hydr. variable Table cross feed manual/automatic. Grinding head electrically and manually height-adjustable electric quick adjustment 300 mm/min Sanding spindle motor: 1.5 KW - 2850 rpm Connection: 380V 50Hz 14A Weight: approx. 1000 kg Space requirement: approx. 2200 x 1500 x 1700 mm