Stylus grinding machine

DECKEL SOE

Condition: ready for operation (used), Deckel SOE Cutter Grinder Maximum grinding length: 90 mm Maximum grindable angle: 180° Maximum grindable radius: 10 mm Coarse traverse: 100 mm Fine adjustment: 15 mm Swiveling range of the indexing head carrier: 90° Coarse adjustment of indexing slide: 40 mm Fine adjustment of indexing slide: 12 mm Height from center of tube guide to center of grinding spindle: 140 mm Wheel size: 100 x 50 x 20 mm You are welcome to arrange a viewing. A proper invoice will be issued. For foreign customers, a net invoice can also be provided. A valid VAT identification number is required. Bdsdpfjxyv Axox Akqsd Subject to prior sale. Should you have any questions, please feel free to contact us by phone. The telephone number can be found at the very bottom of the item page in the imprint/legal information of the seller. Visit our shop and take a look at our other offers as well. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. The installation and electrical connection of the machine/device must be carried out or inspected by a qualified professional. Technical data deviations and errors in the description may occur and are subject to change. Shipping is carried out exclusively to commercial customers – private consumers can only collect in person.

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Bdedpfsbx Eliex Akqsd Table size: AT-F 205 x 345 mm Space required: 1070 x 650 x 1180 mm Drive motor: 500 V (with 380 V, 1/3 power loss), accordingly 0.6 kW

Condition: ready for operation (used), Deckel SOE Graver Grinder Largest collet bore: 17.5 mm Largest grinding length: 90 mm Largest grindable angle: 180° Largest grindable radius: 10 mm Coarse adjustment: 100 mm Fine adjustment: 15 mm Dividing head support pivoting: 90° Coarse adjustment of dividing head slide: 40 mm Fine adjustment of dividing head slide: 12 mm Height from pipe guide center to grinding spindle center: 140 mm Wheel size: 100 x 50 x 20 mm Accessories: Optics Collets You are welcome to come by for a viewing. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. If you have any questions, please feel free to contact us by phone. The phone number is located at the very bottom of the item page in the seller's imprint/legal information. Bjdpov T T Ivofx Akqjdd Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. The assembly and electrical connection of the machine/device must be carried out or checked by a trained specialist. Deviations from technical specifications and errors in the description of the item may occur and are reserved. Shipping is only available to businesses - for private consumers, only pickup is possible.

Condition: ready for operation (used), Cover SOE graver grinding machine Largest bore of the collet 17.5 mm Largest grinding length 90 mm Largest grinding angle 180° Largest sandable radius 10 mm Coarse displacement 100 mm Fine adjustment 15 mm Pivoting of the dividing head support 90° Coarse adjustment of dividing head slide 40 mm Fine adjustment of dividing head slide 12 mm Height from center of tube guide to center of grinding spindle 140 mm Wheel size: 100 x 50 x 20 mm Accessories: Rail for twist drill Optics Collets Grinding wheels You are welcome to visit us for an inspection. We can also arrange a cost-effective forwarding agent for you. Bdodpjq U R Tzsfx Akqod organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: new, Year of construction: 2020,

Condition: used, Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Maxi bore of clamps: 17,5 mm Maxi sharpenable radius: 10 mm Maxi lateral displacement: 10 mm Angle adjustment: 45° Bdsdpozg Hc Asfx Akqod Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Depth: 600 mm Total height: 1300 mm Weight: approx 150 kg

Condition: used, 1 used engraving cutter grinder Manufacturer: Deckel Model: SOE with optics Year of manufacture: 1988 Technical specifications: Motor speed: 2800 rpm Grinding spindle speed: 4500 rpm Drive power: 0.55 kW / 380 Volt Weight approx. 200 kg Accessories and equipment: Collets Optical system Bjdpfx Ajyl Iipskqsdd Machine base / pedestal Tools

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Bjdpoynky Aefx Akqsdd Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: good (used), Year of construction: 1988, Lid SOE graver-grinding machine year 1988 . Accessories : Collets , Good working condition. Bsdpfxjuqv Nae Akqedd

Condition: used, turning speed range - grinding spindle 4500 U/min max diameter of the vice bore 17,5 mm max. radius to grind max. 10 mm max. lateral adjust. of milling cutter 10 max. longitudinal adjust. of milling cutter 40 max. angle for relief grinding 45 Grad weight of the machine ca. 125 kg Operating instructions available including collet set, grinding wheel flange wrench and the following special accessories: - Aluminium oxide grinding wheel - 3 diamond grinding wheels, different versions - 1 additional grinding wheel holder with diamond grinding wheel - Dressing diamond - Grinding dust cover Bsdowlvrgspfx Akqodd

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are selling this lathe. It is connected and can be tested under power. The machine comes with accessories. Turning diameter: 2,000 mm. Turning length: 10,000 mm. Maximum workpiece weight: 60,000 kg. Machining diameter: 2,000 mm. A video of the machine can be sent via WhatsApp. Bedpjxwmbmjfx Akqedd

Condition: used, Year of construction: 1978, clamping diameter max. 17,5 mm grinding spindle speed 4500 U/min relief angle max. 45 ° total power requirement 0,55 kW Bsdpfx Akjtqqpysqjdd weight of the machine ca. 120 kg dimensions of machine L x W x H 0,54 x 0,47 x 1,31 m

Condition: excellent (used), Special accessories for DECKEL SO + SOE tool grinding machines: - 1 milling cutter special holder in very good condition o for grinding shank milling cutters with a diameter of 16 – 25 mm and with a Morse taper socket MK 1, MK 2 + MK 3 o Milling cutters with a shank diameter of 25 mm can be directly inserted o Through-hole max. 25 mm Price: €950.00 net - New collets for milling cutter special holder: - 1 set of collets for milling cutter special holder, inner diameter Ø 16, 18 and 20 mm, price: €129.00/piece net - 1 set of collets for milling cutter special holder, inner square □ 8, 10 + 12 mm, price: €145.00/piece net - 1 set of Morse taper sockets MK 1, MK 2 + MK 3, price: €245.00/piece - New cup grinding wheel Ø 80 mm, price: €40.00/piece net - 1 brand new knurled nut for clamping collets with a saw thread S 20 x 2, price: €99.00 + €12.80 shipping net All of the above prices are net prices plus statutory VAT. Siegfried Volz Werkzeugmaschinen Bdodpfxectyh Us Akqod Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1955, condition: used, Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg Bdedpfx Asd Enr Iskqsd

Condition: reconditioned (used), Year of construction: 1984, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1984 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 84-5532 with guarantee Accessories: - Machine stand - Microscope with support - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Bdodpfxsqctp Ss Akqod Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate - Used, as seen -