3
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine
-Inside: Ø 32 mm
-Outer: Ø 200 mm
-Width: 25 mm
-Number: 2x discs available
Etahvdn
-Price: per piece
-Weight: 1.6 kg
9
grinding wheel diameter 0 mm
power requirement 0 kW
following grinding spindles available:
2 Fortuna SA 100 x 340.20 R, Nr. 126 334, 1.600 U/min - à 700 Eur
2 Fortuna SA 85 x 272.2 R, Nr. 100 588, 2.500 U/min - à 700 Eur
1 Fortuna FAVS 100 R, 250.250, 12.000 U/min - à 700 Eur
1 Fortuna SA 90 x 418.24R, 2.800 U/min - à 700 Eur
1 Fortuna SJ 60 x 355 R, 18.000 U/min - 500 Eur
1 SKF 1033293-1 (ex Hoefler) - à 1200 Eur
Bdxkypp3
1 SKF 1033293-2 (ex Hoefler) - à 1200 Eur
1 SKF 1040329 (ex Hoefler) -...
5
base plate: 210x110 mm
weight of the machine approx.: 60 kg
space requirements of the machine approx.: 0,7x0,52x0,5 m
copy device for grinding machines for grinding wheel forming ( profile device)
details:
- adjustment travel upper table longitudinal=60mm (manual)
- transverse travel = 20mm
- under frame=approx. 60mm ( lockable)
- template table size 310x150mm
Yqbzw0
perfect used condition
4
.
C38kvrnag
used machine underframe / substructure
Width x depth x height approx. 1.13 x 0.89 x 0.79 m
Vertical square tubes, 80 x 80 mm
Formerly used as a base for an eroding machine
Payload estimated max. 1 to
.
.....
5
Recordings for wheels:
11 x grinding wheel width 104 mm
4 x wheel width 62 mm
small diameter of the cone 50 mm
Mb9xb
the cone in large diameter 65 mm
Length 80 mm
Outer diameter of the Flunsch280 mm
Inner diameter of the Flunsch 203 mm
2
dimensions of the machine ca. 0,380 x 0,200 x 0,134 m
weight of the machine ca. 0,024 t
power requirement kW
baseplate-clamping range 110 x 70 mm
workpiece sizes max. 56 x 70 x 25 mm
profile depth max. 15 mm
angular adjustment 0-2 °
Electrik 24 Volt
23tjpn
Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of
a grinding machine for grinding pieces with angle.
Machine dealer with own stock of 2500 m².
3
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine
Zdd8eyksw
-Inside: Ø 51 mm
-Outer: Ø 250 mm
-Width: 40 mm
-Number: 1x discs available
-Price: per piece
-Weight: 3.7 kg
1
For wheels with:
-Bore 127 mm
-Width max. 100 mm
Phrayjryl
Misc. available
MARCELS MASCHINEN AG
2
Length: 1250 mm
Width: 1250 mm
table diameter: 1250 mm
weight of the machine ca.: ca.3,5 t
space requirements of the machine approx.: L:1,7 x B:1,5 x H:0,5 m
MAGNETIC - ROUND- TABLE
- It has been mounted on the lower case of a discus grinding machine.
S8vwdvxjr
- It can be equipped wit a manual or an NC control against extra chrages.
- Height of magnet plate= 200mm
2
.
3 pieces of used flanges come from a JUNG , HF 50 RD
Scope according to pictures !
( 3 flanges , discs without credit )
.
.....
Bzjrergt0m
4
Grinding spindle
Make FAG
Dimensions of the conical pin of the recording:
Diameter 80-61 lg 100 mm intake Cone
Diameter min. 68 lg. 70 mm
Diameter Max 80 lg. 70 mm
min. 61 lg. 100 mm
Max. 80 lg. 100 mm
Length 500 mm
Diameter 200 mm
Weight 100 kg
DX9UK3MUZNK
3fmzx37pd
2
2 Reishauer grinding screw profilers type SPA 05/SKS, 50Hz, 0,15 KW, 380 V-2690 rpm. M1=Mz= 12 MM +- 115 MM x sin +- 4724" +- 4.5276 "x sin.
(1x with holder for overturning diamond)
for profiling of grinding worms with corresponding diamond dressing rolls for generating grinding of gears. For various older Reishauer machine types.
On the mounted plate you can read:
Landert Motors
And Reishauer Made in Switzerland
Sale only in countries of the EU
Bzlhcc8shk
3
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine
-Inside: Ø 32 mm
Yqunhc
-Outer: Ø 170 mm
-Width: 32 mm
-Number: 1x discs available
-Price: per piece
-Weight: 1.4 kg
6
Table size 350x150mm
Height 80mm
Swivelling range 0-45°
MARCELS MASCHINEN CH
Coqmdb9
2
used, refurbished, 24V-magnetic chucks (flat and sinetable)
with and w/o water-cooling
in dimensions
- 400 x 150 mm
- 500 x 200 mm
- 600 x 250 mm
Uhhg3s7x
new wire and plug
subject to prior sale
2
.electromagnet 500 x 300 mm.from an ELB , type SW 5 VAI.....
D2ivx87
4
Headstock
P22l97
Spindle passage 38 mm
Collet Chuck opening width 38 mm
Dimensions: L. 650 x B. 350 x H. 450 mm
1
Available On Stock
Bdkaltpnkb
2
Wire brush round, round grinding brush, braid round brush, grinding wheel, cup wheel
-Inside: Ø 25 mm
Hvlrteh
-Outer: Ø 300 mm
-Width: 25 mm
-Number: 5x discs available
-Price: per piece
-Weight: 2.5 kg
8
Item condition: Used from stock
Signs of wear: No signs of wear
Manufacturer: Gamfior
Warranty in months: 12
Bzfmwuwsoa
Frequency: 600 Hz
Power: 8,5 kw
Voltage: 350 V
Current: 23 A
Flange diameter: 81 mm
Inner Ø: 16 mm
Outside Ø: 150 mm
Length: 276 mm (without plug)
Speed (max): 36000 1/min
Weight: 28.76 kg
Storage location: Rosenfeld
Storage location P8C3
We can deliver all spare parts for JUNG JF- und HF-series.
z.B. grinding flanges, switches, bellows, refurbished grinding and transvers spindles, hydraulic pistons etc.
Bqef2dlt22
Also equipment like magnetic chucks (new oder refurbished), dressers,
filtrtion units, lubrication pumps etc.
Also used parts which are discontinued by the manufacturer.
Please inquire wih the exact part name.
2
.
Dresser for disc width , universal use
.
Scope according to pictures !
( including 1 piece dressing diamond )
.
Scaling at the adjusting screw : 1/100 mm
Bzip2wnogx
.
2
Workpiece holders for grinding
Nt2ux
diameter 22 mm length 200 mm
diameter 27 mm length 250 mm
diameter 32 mm length 300 mm
in a wooden box
Weight 8,5 kg
6
Grinding workstation
consisting of:
- Extraction table 1000 x 700 x 500 mm
- vice jaw width 150 mm
- working light
Bwzobikjgb
- suction and filter unit ATH 103
used, in good condition
3
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine
-Inside: Ø 51 mm
-Outer: Ø 200 mm
-Width: 41 mm
Piz0s3df
-Number: 1x discs available
-Price: per piece
-Weight: 2.1 kg
4
Magnetic plate: 110 x 75 mm.
Angle adjustment: 0 to 2 degrees.
Operating voltage: 24 Volt.
Dimension: 500 x 200 x 125 mm high.
In original JUNG wooden case, with tools and
and operating instructions.
Weight: approx. 25 kg.
The part can be visited after arrangement and is immediately available. Shipping possible by arrangement.
Please also note my other advertisements
Bwy0l0w9eb
1
Plate length: 450 mm
Plate width: 175 mm
with narrow cross pole pitch: 9 mm
Height including plate carrier: 125 mm
elec. Connection: DC 24 V
Bflal0mbjm
Current consumption: 2.56 A
5
Length: 380 mm
Width: 200 mm
Bzhlu9r3nh
Height: 134 mm
.
Permanent magnet clamping plate
Clamping range: 110 x 70 mm
6
33 Schleifdorne various sizes
from different manufacturers, for example, Fritz Werner, and stock and co.
Gr.:
14-15 - 16-2 x 17-2 x 18 - 2 x 20-21.5 - 22-24 - 2 x 25-26 - 27-28 - 3 x 30-32 - 34-2 x 35-2 x 36 - 38-40 - 42-45 - 60-65
Ptesay
2
Solenoid No.3 13420
Technical data:
Magnetic clamping chuck 600 x 200 mm
Performance 1.4 A
Magnetic height 85 mm
Voltage 110 V
with
Bdt37nniih
-Connection cable with on / off switch
used, in good condition
2
Wire brush round, round grinding brush, braid round brush, grinding wheel, cup wheel
Gutzqg
-Inside: Ø 32 mm
-Outer: Ø 200 mm
-Width: 25 mm
-Number: 3x discs available
-Price: per piece
-Weight: 1 kg
5
Szlifierka Hauser 3SMO
Długość stołu roboczego 600 mm
Szerokość stołu roboczego 320 mm
Maksymalna odległość między stołem a wrzecionem 500 mm
Maksymalna średnica rektyfikowanego otworu 220 mm
Moc napędu wrzeciona 6 kW
Cosfu2p
Maksymalna prędkość obrotowa wrzeciona 50 000 1 / min
Wysokość maszyny 3000 mm
Długość maszyny 3000 mm
Szerokość maszyny 3000 mm
Masa maszyny 2 t
2
Abdreharm RA 1, Abrichtbereich:
aushoehlend 0,5 - 32 mm (104 - 162 mm)
umfassend 0,5 - 22 mm
Abdreharm RA 2, Abrichtbereich:
aushoehlend 154 - 210 mm
umfassend 10 - 65 mm
I83ulmyv
Abdreharm RA 3, Abrichtbereich:
aushoehlend 22 - 70 mm (66 - 120 mm)
6
.
used
1 x radius dresser , make JUNG
1 x radius dresser, make unknown, adjustable
Scope according to pictures !
( without dressing diamond )
.
each with scale and adjustable stops
Cveix82re
.
The sale takes place individually !
.
.....
2
Grinding wheel
Make aluminium oxide
B9xzbcym
Type: 220 x 32 x 51
11
Dressing spindle type DRESS 72-37 for dressing grinding wheels to be profiled, incl. motor connection cable and spindle carrier. According to the manufacturer highest precision and smooth running during the dressing process.
HF spindle Dress 72 - 37
spindle housing 72 mm
Speed up to 16.000 min-1 (clockwise/anticlockwise rotation)
Power S1 100% 0,5 kW from 11.500 min-1
Power S6 40% 0.8 kW from 11,500 min-1
Ytkdwo
Motor type Asynchronous, 3 phases
Number of poles 4 poles
Voltage 230 Volt
Current S...
2
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine
-Inside: Ø 32 mm
Zdd2fmskm
-Outer: Ø 200 mm
-Width: 6 mm
-Number: 9x discs available
-Price: per piece
-Weight: 0.4 kg
10
Ball screw
Make: Walter
Spindle number: 1513.108 - 4.32.583.690
Id. number: 203844-533
Spindle diameter shaft: 25 mm
Thread: 31 mm
Pitch: 3 mm
Pjyoz
Total length: 690 mm
Thread length: 580 mm
Thread diameter front: 24 mm
Internal thread: 8 mm
Spindle nut flange mounting diameter: 47 mm
External flange diameter: 77 mm
length spindle nut: 70 mm
Rear shoulder diameter: 15 mm
Length of shoulder: 10 mm
Condition: unused
Application: for CNC tool grinding machine Walter Heli 35 or similar.
1
Grinding head KSK 128:
Head diameter: 128 mm
Head height without shank: 86 mm
Slide adjustment: 45 mm
Delivery per crank revolution: 0.2 mm
-Delivery: 0.001 mm
maximum speed in the recorded work spindle: 500 rpm
Spindle use USF 90/L:
editable bore-Ø: 1-40 mm
Max grinding depth depending on the bore: 7-30 mm
Speed at 4.0 bar: 82000 RPM
Dify3f2s
Rpm at 5.5 bar: 90000 UPM
maximum radial runout: 0.002 mm
Noise: 71 dBA
6
.
used angle adjustable dresser , with dressing stroke
was built on a JUNG, type HF 50 RD
Scope according to pictures !
( including dressing diamond )
Bzgg2p3ify
Angle adjustable after large scaling
45° grid
Manual dressing path via hand lever approx. 35 mm
.
.....
3
Three-jaw Chuck
Mount MT 3
Diameter 130 mm
Bdof7r7xog
with indoor and outdoor baking
6
Refurbished grinding spindle I, No. 5.500.06.009.02, with mounting Ø 10, for KAPP profile grinding machine VAS 432
Bhx3fxhohe
Designed for a wheel width of approx. 10 mm
2
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine
-Inside: Ø 127 mm
-Outside: Ø 400 mm
-Width: 50 mm
-Number: 1x discs available
-Price: per piece
Zdd0izboj
-Weight: 11 kg
1
The coolant filtration equipment was procured for a clear wet grinding in grain 80 – 400.
The filtration equipment should separate the oil from the swarf.
Output product range: Cleaned oil
Yearly production capacity: Volume flow: 1000 l/min
Brief technical specification of the main parts:
Supply pressure: 4 bar
Electrical total connected load: 60 kW
Noise emission: max 70 dB(A)
Chamber volume: 10 m³
Max. removable passage volume: 3 m³
Coolant viscosity: 2-5 cSt
Suzumc
1
Abrasive belts for Belt Sanders with band size 150 x 2000 mm
Grain 80, 44 pieces
Grain 60, 35 pieces
Grain 36, 12 PCs
V8qfw
Prices on request!
2
.
By9tx388rm
3 pieces of used flanges come from a JUNG , HF 50 RD
Scope according to pictures !
( 3 flanges , discs without credit )
.
.....
3
Nr. 3851:
div. (gebr.) Segment - Schleifsteine
Ca. Abmessungen in mm:
14 x 120/75/38
12 x 120/90/38
11 x 120/98/38
14 x 120/115/38
H2ldful
5 x 120/130/38
1
Various slime discs for Weinig Rondamat 960, 936,935,934
K8kklipp
3
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine
-Inside: Ø 51 mm
-Outer: Ø 200 mm
-Width: 32 mm
-Number: 2x discs available
-Price: per piece
2qafpm
-Weight: 2.1 kg
8