Used surface grinding machines for sale (29)

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 450 mm, number of axes: 3, This 3-axis OKAMOTO Grind-X ACC-450 DX was manufactured in 1996. It features a grinding range of approximately 450 x 150 mm and a maximum grinding height of 300 mm. The machine includes a hydraulic table drive and an electromagnetic clamping plate for enhanced precision. If you are looking to get high-quality surface grinding capabilities, consider the OKAMOTO Grind-X ACC-450 DX machine we have for sale. Contact us for further details. Dcodpfs Ah Sggjx Aqvsp - Table Dimensions: approx. 450 x 150 mm with T-slots - Max. Table Load Capacity: approx. 120 kg - Max. Grinding Height: approx. 300 mm (table surface to spindle center) - Machine Weight: approx. 1,500 kg - Drive Mechanism: Hydraulic table longitudinal drive - Operation / Controls: Compact control console with axis jog, cycle, and downfeed functions - Machining Capability: Surface / precision grinding (wet grinding capable) - Included Fixtures: Electromagnetic clamping plate on table, grinding wheel flange, wet grinding device with filter paper band unit - Excluded Items: Grinding wheel (delivered without wheel) - Conformity: CE marked

Year of construction: 2021, condition: ready for operation (used), travel distance X-axis: 1,350 mm, travel distance Y-axis: 560 mm, overall weight: 6,100 kg, total width: 2,200 mm, total height: 2,600 mm, spindle motor power: 7,500 W, product length (max.): 4,600 mm, spindle speed (max.): 1,500 rpm, table length: 1,200 mm, table load: 1,880 kg, table width: 500 mm, number of axes: 3, This 3-axis Proth PSGC-50120AHR surface grinding machine was manufactured in 2021. It features a table size of 500 x 1,200 mm and a maximum travel of 560 x 1,350 mm. The machine has a continuous table load capacity of 1,200 kg and includes a digital readout system retrofitted in 2022. If you are looking to get high-quality grinding capabilities, consider the Proth PSGC-50120AHR machine we have for sale. Contact us for further details. Dodpfxo Aa Ay Uj Aqvjcp - Max. Distance Spindle Center to Table: 700 mm- Table Load Capacity (Continuous): 1,200 kg- Table Load Capacity (Non-continuous): 1,880 kg- Weight of Electromagnetic Plate: 315 kg- Installation Height Table to Bottom Edge of Grinding Wheel: 522 mm- Hydraulic Longitudinal Feed: 1 - 25 m/min- Step Cross Feed: 0.1 - 15 mm/stroke- Continuous Stepless Cross Feed: 50 - 1,500 mm/min- Handwheel Rotation Cross: 5 mm/rev (Graduation: 0.02 mm)- Handwheel Rotation Vertical: 0.25 mm/rev (Graduation: 0.002 mm)- Automatic Vertical Feed: AD 1- Spindle Speed: 1,500 RPM (Infinitely variable)- Spindle Motor: 7.5 kW (400V, 4P, 15A, 50Hz)- Cross Feed Motor: 0.37 kW / 0.7 kW (220V, 6P, 2.1A, 50Hz)- Rapid Feed Motor: 0.75 kW (110V, 6P, 6.1A, 50Hz)- Hydraulic Pump Motor: 3.7 kW- Transformer Tr1: 825 VA- Transformer Tr2: 2,000 VA- Drive Power (Antriebsleistung): 400V, 3P, 34.05A, 50Hz- Coolant System: Coolant device with paper filter and magnetic separator (Capacity: 100 liters)- Mist & Dust Extraction System: Model PSGC-50120AHR, Tank Capacity: 100 l, Output: 50-60 l/min, Motor: 0.55 kW, 400V, 1.8A, 50Hz, Weight: 120 kg- Digital Readout (DRO): 2-Axis Digital Readout (SINO SDS6-2V, SN: 7201723C0032, Scale: KA-300 1µm - 670 mm) retrofitted in 05/2022- Grinding Wheel Dimensions: 400 x 50 x 127 mm / 355 x 50 x 127 mm (Included KINIK 405 x 50 x 127 mm 32A 46 J 9 V, 33 M/S)- Number of Axes: 3 Axes (X, Y, Z movements with 2-Axis DRO on Y)- Optional Equipment & Features: Parallel dresser (head mounted), Table dressers, Balancing arbor, Balancing scale, Electric handwheel, LED lighting, Alignment feet, 6x Grinding wheel flanges total, Complete hydraulic and electrical system- Travel dimensions: 4.1W x 2.7D x 2.96H m)- Optional spare grinding wheels (including ZISCHE and KINIK brands) and various wheel flanges in stock/storage rack

Year of construction: 2012, condition: used, functionality: fully functional, OKAMOTO - ACC 64CA- Dcsdszxri Sepfx Aqvjp 10 X: 800 mm, Y: 440 mm, Z: 522 mm

Year of construction: 2023, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, overall weight: 5,500 kg, total width: 2,840 mm, total height: 2,700 mm, product length (max.): 5,440 mm, table length: 1,000 mm, table width: 500 mm, number of axes: 3, This 3-axis KNUTH HFS 50100 F NC was manufactured in 2023. It features a magnetic table measuring 1000 mm x 500 mm and a powerful total power of 14 kW. The machine includes a coolant system with a paper belt filter and magnetic separator, along with essential accessories such as grinding wheel flanges and precision vises. If you are looking to get high-quality surface grinding capabilities, consider the KNUTH HFS 50100 F NC machine we have for sale. Contact us for further details. Dcsdpfxez D Tb Re Aqvsp - Control: Siemens Smart Line Touch- Magnetic table: 1000 mm x 500 mm- Total Power: 14 kW- Voltage: 400 V- Frequency: 50/60 Hz- Grinding wheel size: D350 x 40 mm- Coolant System: Coolant system with paper belt filter and magnetic separator- Included Accessories: 2x grinding wheel flanges, grinding wheel dresser, balancing stand with balancing shaft, 1x Röhm precision vise (PL-120S), 2x Röhm precision vise (PL-70S), hydraulic oil (approx. 80 L in canister)- Documentation: Complete machine documentation and service reports available

Year of construction: 2022, operating hours: 1,861 h, condition: excellent (used), functionality: fully functional, For sale is a Rösler wheel processing system, type FBA 24/2 Turbo. This system was specifically developed for the needs of professional wheel processing and, thanks to two laterally arranged unbalance motors, enables flawless results with short processing times. The stepless speed control and adjustable motor position allow the system to be flexibly adapted to almost any processing task. The compact wheel processing system is ideal for pre-grinding, fine-grinding, and polishing of standard and custom wheels up to 24 inches. Thanks to easy operation and quick abrasive change, wheels can be polished to a mirror finish in just a few hours – for a high-quality mirror finish in an elegant metallic look, both for used and new wheels. The pneumatic loading and unloading system makes loading and unloading the wheels very easy and quick. In addition to wheels, other components can also be processed here. The working container is equipped with a flexible clamping device for different wheel types and is lined with a high-quality wear-resistant lining made of polyurethane elastomer (Rösler HD 90). The specially ribbed, stress-relieved, annealed welded construction ensures a long service life and smooth, robust operation even in continuous operation. Application areas: High-gloss polishing of wheels of all types (automotive and motorcycle) up to 24 inches Aluminum, cast, and forged wheels Polishing of other engine components Refurbishing of components, e.g., from the classic car sector or the aerospace, defense, etc. industries Technical specifications: Manufacturer: Rösler Oberflächentechnik GmbH Type: FBA 24/2 Turbo wheel processing system Working container: Inner diameter 700 mm, container depth 550 mm Wear-resistant lining: high-quality polyurethane elastomer, Rösler HD 90 Design: durable, specially ribbed welded construction, stress-relieved, annealed Motors: 2 special unbalance motors designed for continuous operation Speed: 3,000 rpm, steplessly adjustable via frequency converter Automatic reversing of direction of rotation Djdpfxozw A Rwo Aqvjcp Various programs can be stored in the Siemens PLC control system, thus achieving reproducible results. An automatic program sequence guarantees a low error rate for the operator. We have a total of over 80 vibratory finishing systems in stock; please contact us for all your vibratory finishing needs.

Year of construction: 2015, operating hours: 9,200 h, condition: ready for operation (used), travel distance X-axis: 765 mm, overall weight: 1,960 kg, total height: 1,900 mm, product length (max.): 1,850 mm, table width: 1,920 mm, number of axes: 3, This 3-axis KNUTH HFS 30638 C surface grinding machine was manufactured in 2015. It has a weight of 1,960 kg and has operated for approximately 9,200 hours. If you are looking to get high-quality grinding capabilities, consider the KNUTH HFS 30638 C machine we have for sale. Contact us for further details. Dcsdszzzxhepfx Aqvjp - Total Power: 6.8 kW- Voltage: 400 V- Frequency: 50 / 60 Hz- Centralized Lubrication Unit: ISHAW YET-A2/A2P2, 2 L capacity- Hydraulic System Pressure: 1270 Psi- Included Components: Machine leveling feet/mounts (5 units visible), Electrical diagrams/manual- Compliance: CE-marked

Year of construction: 2019, condition: ready for operation (used), travel distance X-axis: 1,500 mm, number of axes: 2, Surface grinding machine manufactured in 2019. This ACRA ASG-2460HSR features a table working surface of 600 × 1,500 mm and a machine weight of 7,500 kg. It includes hydraulic longitudinal table feed and automatic cross feed for enhanced efficiency. If you are looking to get high-quality surface grinding capabilities, consider the ACRA ASG-2460HSR machine we have for sale. Contact us for further details. - Table Size / Working Surface: 600 × 1,500 mm - Elevation: Rapid electric elevation for lifting and lowering the grinding head - Auto Downfeed Control: AD5 automatic downfeed / feed control included - Wheel Dressing Unit: NC wheel dressing device with automatic compensation - Magnetic Chuck: Electromagnetic / permanent magnetic clamping table 600 × 1,500 mm with demagnetizing unit - Coolant System: Coolant system equipped with paper/cartridge filter and settling/decantation tank - Spindle: High-precision grinding spindle - Wheel Mounting: Intermediate clamping flange / hub for grinding wheel - Lighting: Halogen work light - Machine Base: Heavy-duty cast iron construction for vibration dampening and structural rigidity - Motor Power: 7.5 kW- Voltage: 380 V - Power Supply: 3-phase - CE Marked: Yes - Machine Length: approx. 4,800 mm - Machine Width: approx. 2,450 mm - Machine Height: approx. 2,040 mm - Total Weight: 7,500 kg Dodpfo Ahx R Sjx Aqvecp

Year of construction: 2016, condition: ready for operation (used), travel distance X-axis: 500 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 3,500 rpm, table load: 200 kg, number of axes: 2, Surface grinding machine manufactured in 2016. This OKAMOTO ACC 52 SA features a grinding length of 500 mm and a grinding width of 200 mm, with a maximum table load of 200 kg. The hydraulic table feed rate reaches up to 27 m/min, and the spindle speed can go up to 3,500 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 52 SA machine we have for sale. Contact us for further details. * Grinding length: 500 mm* Grinding width: 200 mm* Maximum grinding height (table to spindle center): 350–397 mm* Magnetic chuck: 500 x 200 mm* Table load capacity: 200 kg* Hydraulic table feed: up to 27 m/min* Grinding spindle motor power: 1.5 kW* Standard grinding wheel: 225 x 19 x 50.8 mm Dodpfxozwpt Ee Aqvscp Optional Accessories available

Year of construction: 2006, condition: ready for operation (used), travel distance X-axis: 860 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: FANUC, controller model: Series 0i-Mate, overall weight: 3,000 kg, total width: 2,000 mm, total height: 2,100 mm, spindle motor power: 3,700 W, product length (max.): 2,800 mm, table load: 400 kg, number of axes: 3, This 3-axis GER SC 80-40 surface grinding machine was manufactured in 2006. It features a maximum grinding capacity of 800 × 450 mm and an X-axis travel of 860 mm. The machine is equipped with a FANUC Series 0i-Mate CNC control and a powerful 3.7 kW grinding wheel motor. If you are looking to get high-quality grinding capabilities, consider the GER SC 80-40 machine we have for sale. Contact us for further details. • Type of drive: Longitudinal drive: Hydraulic; Cross and Vertical drives: Servo Motors • Closure: 4-SidedTable • Outer length: 800 mm • Outer width: 400 mm Dcode Afhprspfx Aqvsp • Magnetic table: Yes • Max distance between vertical spindle and table: 625 mm • Maximum Grinding Capacity: 800 × 450 mm • Maximum Grinding Height: 340 mm • Automatic Vertical Feed: Yes • Grinding Wheel Dimensions: Ø300 × 50 × Ø76.2 mm • Automatic Wheel Dressing: Yes • Coolant Filtration System: Decanting Filter

Year of construction: 2015, operating hours: 2,286 h, condition: ready for operation (used), travel distance X-axis: 780 mm, travel distance Y-axis: 450 mm, controller manufacturer: FANUC, controller model: Series 32i-MODEL B, overall weight: 5,000 kg, spindle motor power: 7,500 W, table length: 700 mm, table width: 400 mm, number of axes: 3, This 3-axis AMADA Techster 84 surface grinding machine was manufactured in 2015. It features an X-axis travel of approximately 780 mm and a Y-axis travel of approximately 450 mm. The machine is equipped with a powerful 7.5 kW spindle motor and a magnetic chuck size of 700 × 400 mm. If you are looking to get high-quality grinding capabilities, consider the AMADA Techster 84 machine we have for sale. Contact us for further details. • Control: FANUC Series 32i-Model B • Power Supply: 200 V • Power Supply Type: 3-Phase • Frequency: 50 Hz • Power Consumption: 23 kVA • Full Load Current: 50 A • Spindle Motor: 7.5 kW (Reinforced) • Grinding Wheel Dimensions: Ø 355 × 38–50 × 127 mm • Distance from Spindle Center to Table: Approx. 500 mm • Magnetic Chuck Size: 700 × 400 mm • Magnetic Chuck Pole Pitch: 4 mm • LED Working Area Lighting • Oil-Cooled Grinding Spindle • Compressor Air-Cooled Spindle Cooling • Temperature Control Accuracy: Approx. ±0.1 K • Automatic Touch Probe • Highskip Feed / High Speed Skip • Ethernet (LAN) Interface • Extended Memory Control Module • FANUC Macro B Djdpfszk I Afjx Aqvecp • Programmable Timer for Automatic Start/Stop and Warm-Up • CE Declaration of Conformity • Band Filter System 450 (E3.1) • Coolant Tank Capacity: Approx. 450 L • Filter Fineness: Approx. 20 µm • Emulsion Mist Extraction System 1100 • IFMC Oil Mist Separator • Machine Demonstration Possible • Grinding Spindle Hours: Approx. 2,286 h • General overhaul including geometric overhaul. The machine has only operated for approximately 504 hours since the overhaul Additional Equipment • WinWop Programming Software for Windows • CGS (Complete Grinding Solutions) CAM Software • Profile Dressing Unit with TPA 100 R • Pre-Dressing Unit VPA 100 R with Motorized Diamond Wheel • Table-Mounted Straight Dresser • Diamond Dressing Arbor R100-40-0.15 CVD • Regrinding Package for Diamond Wheel (Techster 84–104) • 100 mm Diamond Wheel for Pre-Dressing Unit • 700 mm Stop Bar with Prism • MPM Automatic Wheel Balancing System • Grinding Wheel Flange for Techster 64/84 (Ø 355 mm) • Modified Grinding Wheel Guard • Operating Tool Kit (Keys and Extraction Arbor)

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 3,000 mm, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis WMW-Heckert SZ10-10-03 surface grinding machine was manufactured in 1989. It features a grinding length of 3,000 mm and a working width of 1,250 mm, with a maximum workpiece weight of 9,450 kg. The machine includes a clamping table surface of 3,230 x 1,000 mm and a permissible table load of 3,150 kg/m. If you are looking to get high-quality grinding capabilities, consider the WMW-Heckert SZ10-10-03 machine we have for sale. Contact us for further details. Dsdpfx Aqj Agvq Ajvjcp - Grinding / Working Length: 3,000 mm - Grinding / Working Width: 1,250 mm - Grinding / Working Height: 1,000 mm - Clearance Width Between Columns: 1,410 mm - Clearance Width Between Covers: 1,310 mm - Clearance Height: Max. 1,120 mm - Table Height Above Workshop Floor: Approx. 785 mm - Clamping Table Surface: 3,230 x 1,000 mm - T-Slots (per TGL 3045): 8 slots; Width 22H12 mm; Spacing 125 mm - Permissible Table Load: 3,150 kg/m (evenly distributed) - Maximum Workpiece Weight: 9,450 kg - Table Speed: Infinitely variable 2 – 50 m/min - Crossbeam Traverse Speed: 560 mm/min - Overall Machine Dimensions (L x W x H): Approx. 10,700 x 7,395 x 4,710 mm - Total Machine Weight: 39.3 t (nameplate) / approx. 50,000 kg (technical data sheet) - Main Power Supply: 3N~ / 50 Hz, 380 V - Control Voltage: 110 V - Auxiliary Voltage: 24 V - Connected Load: 126 kW - Machine Rated Current: 190 A - Mains Supply Fuse: 224 A slow-blow - Grinding Supports: Surface grinding support and swiveling grinding support - Control / Interface: Swiveling control pendant equipped with a Siemens SIMATIC OP3 panel and analog controls/dials

Year of construction: 2001, condition: ready for operation (used), travel distance X-axis: 2,150 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 500 mm, controller manufacturer: FAGOR, overall weight: 12,000 kg, total width: 7,770 mm, spindle motor power: 15,000 W, product length (max.): 3,130 mm, table load: 1,500 kg, number of axes: 3, This 3-axis GER SE 200-75 was manufactured in 2001. It features a maximum grinding dimension of 2000 × 800 mm and an impressive X-axis travel of 2150 mm. The machine is equipped with FAGOR servo motors and a powerful 15 kW grinding wheel motor. If you are looking to get high-quality grinding capabilities, consider the GER SE 200-75 surface grinding machine we have for sale. Contact us for further details. • Automatic cycles: Cycle-Based Programming • Type of drive: Servo Motors • Closure: Full EnclosureTable • Outer length: 2000 mm • Outer width: 750 mm • Max distance between vertical spindle and table: 700 mmExtra Information • Maximum Grinding Dimensions: 2000 × 800 mm • Maximum Grinding Height: 450 mm • Grinding Wheel Dimensions: Ø400 × 75 × Ø127 mm • Automatic Wheel Balancer • Grinding Wheel Speed Control: Variable Speed Drive • Hydraulic Table-Mounted Wheel Dresser: Yes Dcodpfx Aqs Afhxmovsp • Automatic Vertical Feed: Yes • Automatic Wheel Dressing with Compensation: Yes • Coolant Filtration System: Decanting Filter

Year of construction: 1994, condition: ready for operation (used), travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 407, number of axes: 3, This MIKRON BTM 2000 surface grinding machine was manufactured in 1994. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 800 mm, and Z-axis travel of 1,000 mm. The machine has a maximum table load of 3,500 kg and a spindle speed of up to 4,000 rpm. If you are looking to get high-quality surface grinding capabilities, consider the MIKRON BTM 2000 machine we have for sale. Contact us for further details. - Not fully functional; error message "Grober Positionierfehler" (Gross positioning error);- Electronic Handwheel: Heidenhain HR 330 - Maximum Table Load: 3,500 kg - Rapid Traverse (X/Y/Z): 15 m/min each - Milling Head: Manual universal milling head - Spindle Speed: Up to 4,000 rpm (min⁻¹) - Tool Taper / Holder: ISO 40 according to DIN 2080 - Linear Measuring System: Direct Heidenhain LS 106 C linear scales in X, Y, and Z - Drive Technology: Siemens SIMODRIVE 611 - Working Area Enclosure: Sliding doors and strip curtain / lamellar splash guard - Cooling / Auxiliary: Separate cooling unit / aggregate - Maintenance History: Y/Z-slides overhauled by a specialized company approx. six years ago Dods Agvq Hjpfx Aqvocp

Condition: as good as new (ex-display), functionality: fully functional, Demonstration unit. Dcedpfx Ajzwv E Ujqvjp

Year of construction: 2006, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC Panel PC, overall weight: 2,100 kg, total width: 1,650 mm, total height: 2,050 mm, product length (max.): 1,200 mm, number of axes: 1, Surface grinding machine manufactured in 2006. This STAEHLI DLM 450 features a lapping wheel diameter of 450 mm and a maximum lapping wheel speed of 110 rpm. It has a robust machine weight of 2100 kg and dimensions of 1200 × 1650 × 2050 mm. If you are looking to get high-quality lapping capabilities, consider the STAEHLI DLM 450 machine we have for sale. Contact us for further details regarding this machine. Dcjdpfx Aqozyp Arovep - Voltage / Frequency: 400 V / 50 Hz- Max. Current: 50 A- Power Consumption: 26 kW- Wiring Diagram No.: S-2816- Machine Weight: 2100 kg (Nameplate) / Net weight 1900 kg- Dimensions: 1200 × 1650 × 2050 mm- Lapping Wheel Diameter: Ø 450 mm- Lapping Wheel Speed: 0–110 rpm- Max. Lapping Wheel Drive Power: 2 kW- Max. Load on Upper Lapping Wheel: 20 daN- Internal Drive Speed: 0–115 rpm- Max. Internal Drive Power: 0.5 kW- Lapping Wheel Drive Motors (DC Motor): Armature Voltage 260 V, Field Voltage 340 V, Speed 3110 rpm, Power 2 kW, Forced Ventilation 220 V (50/60 Hz)- Internal Drive Motor: Continuously variable DC Motor, Armature Voltage 260 V, Field Voltage 340 V, Speed 3110 rpm, Power 0.5 kW, Forced Ventilation 220 V (50/60 Hz)- Vertical Motion Motor: Stepper motor, 50 steps/sec, Torque 1100 Nm- Ring Gear Adjustment: AC brake motor (2 positions), 380 V / 50 Hz, Speed 700–1400 rpm, Power 0.25/0.37 kW, DC Brake 24 V (16 Nm)- Power Converter: Input 380 V / 50 Hz, Armature Voltage 270 V, Field Voltage 340 V- Worm Gear Ratios: Internal drive i = 1 : 30, Lower system i = 1 : 15.5, Upper system i = 1 : 15.5- Operating Compressed Air Pressure: 6–7 bar- Lapping Fluid Pump: 380 V / 50 Hz, Speed 2600 rpm, Flow rate 57 l/min, Protection class IP 44- Control and Measuring Device: Measuring range ±3 to ±11,000 mm (Millitron manual reference)- Inductive Sensor: Measuring range ±2 mm- Setpoint Adjustment Device: 4-digit display- Control Panel / System: Siemens SIMATIC Panel PC- Control System Processor: Intel Celeron M processor 1.50 GHz- System Memory: 1562624 KB (Ext. Memory), 640 KB (System Memory), 384 KB (Shadow Ram), 1024 KB (Cache Ram)- Hard Disk Storage: 40021 MB (Hard Disk 2)- BIOS / System Date: PhoenixBIOS, BIOS Date Operating System: Microsoft Windows XP Professional / Microsoft Windows Recovery Console

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 700 mm, travel distance Y-axis: 475 mm, travel distance Z-axis: 370 mm, overall weight: 3,800 kg, total width: 1,900 mm, total height: 2,710 mm, spindle motor power: 5,700 W, product length (max.): 2,750 mm, spindle speed (max.): 2,900 rpm, table load: 600 kg, number of axes: 3, This 3-axis ELB Schliff Perfket 6 SPS-NK was manufactured in 2004. It features a grinding range of 600 mm in length, 400 mm in width, and 475 mm in height. The machine has a maximum table load capacity of 600 kg and a longitudinal stroke of 700 mm. If you are looking to get high-quality surface grinding capabilities, consider the ELB Schliff Perfket 6 SPS-NK machine we have for sale. Contact us for further details. • Operating voltage: 3 × 400 V • Frequency: 50 Hz • Total power supply: 11 kW • Max. fuse protection: 25 A • Control voltage: 24 V DC • Grinding range: • X (length): 600 mm • Z (width): 400 mm • Y (height): 475 mm • Longitudinal axis X: • Table speed: 2–30 m/min • Vertical axis Y: • Max. feed speed: 300 m/min • Min. infeed: 0,001 mm • Cross axis Z: • Max. feed speed: 2000 mm/min • Min. infeed: 0,001 mm • Grinding spindle: • Taper: 36 mm • Drive power: 4,3–5,7 kW • Speed range: 1440/2900 rpm • Grinding wheel dimensions: • Diameter (D): 300 mm • Width (T): 50 mm Dcedpfx Aez Dvmpjqvsp • Bore (H): 76.2 mm

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 550 mm, overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, number of axes: 2, This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information. Machine Benefits Technical Machine Benefits • Suitable for heavy-duty operations. Extra Information Dcedpfx Aqoyz Scgovjp The machine is currently not under power Dimensions Machine Depth 6400 mm

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Djdjyw Rhmepfx Aqvocp Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, STRUERS Automatic Metallographic Grinding and Polishing Machine Automatic Grinding and Polishing System Struers Xmatic U NEW / unused With ultrasonic cleaning and accessories For sale is a new, unused Struers Xmatic U for fully automatic metallographic sample preparation. Automatic grinding, polishing, cleaning and drying of material samples for metallography and quality assurance. Technical data: Manufacturer: Struers Type: Xmatic U Article number: Type of equipment: Automatic grinding and polishing system Design: With ultrasonic cleaning Power connection: 3 × 380–480 V / 50–60 Hz Equipment and functions: Automated grinding and polishing processes Automatic sample holder handling Cleaning and drying processes Ultrasonic cleaning Programmable preparation sequences Reproducible sample preparation Dimensions and weight: Footprint according to manufacturer: approx. 2,430 × 750 mm (W × D) Total weight according to weighing: 1,300 kg Machine height: not confirmed Transport dimensions: on request Scope of delivery according to parts list and original photos: 1 × Struers Xmatic U – Art.-No. × RFID stainless steel sample holder Ø 160 mm 6 × Ø 25–40 mm – Art.-No. × special leveling unit for 160 mm holder Art.-No. DE sets of disposable tray inserts – Art.-No. 49900077 Filter bag for MD station – Art.-No. 49900085 1 × lapping diamond – Art.-No. × dressing stones – Art.-No. 40800241 1 × collection tray 2,600 × 950 × 50 mm Material thickness 3 mm – DE-730300 1 × Service kit Xmatic – Art.-No. 16892999 Additionally documented in original photos: 75-liter container – Art.-No. Notes on the scope of delivery: The circulation pump with changeover valve for the MD station (Art.-No. is not included in the documented scope of delivery. Check the scope of the cooling system and connection components before commissioning. Condition: NEW / unused Not assembled or put into operation Main unit stored in a wooden crate Accessories packed separately Assembly and commissioning are not part of this offer and must be organized by the buyer. Original purchase price (net): 148,000 € Total weight according to weighing: 1,300 kg Shipping by forwarding agent possible by arrangement. Dcjdpfoz Tqt Rsx Aqvep Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2002, condition: ready for operation (used), controller manufacturer: FANUC, Surface grinding machine manufactured in 2002. This Jones & Shipman Format 5-200 includes Mitutoyo PH 350 projector and features a table size of 600 x 200 mm and includes a comprehensive set of accessories, including 42 new discs of various widths and 19 diamond dressers. The machine is in very good condition, having been operated primarily by the same operator. If you are looking to get high-quality surface grinding capabilities, consider the Jones & Shipman Format 5-200 machine we have for sale. Contact us for further details. • Offered in a set with Mitutoyo PH 350, including a complete set of accessories • Outer length: 600 mm • Outer width: 200 mm • Including accessories: 42 pcs of new discs • New discs widths and quantities: 3 mm - 6 pcs, 4 mm - 1 pc, 6 mm - 11 pcs, 8 mm - 9 pcs, 10 mm - 3 pcs, 13 mm - 9 pcs, 16 mm - 2 pcs, 20 mm - 1 pc Djdpszr Ncijfx Aqvocp • Used discs mounted on a carrier - different roughnesses - 10 pcs • Diamond dressers: newly sharpened angle and radius - 19 pcs, suitable for repair - 7 pcs, 4 pcs on the machine • 5x disc drive • 1x balancer • Very good condition • Only one owner • Operated by the same operator 90% of the time

Condition: good (used), machine/vehicle number: 64 DX, Okamoto 64 DX surface grinder. Dcjdpfx Ajzkwudoqvep

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250108, total height: 2,200 mm, overall weight: 700 kg, total length: 1,700 mm, total width: 1,300 mm, type of input current: three-phase, workpiece weight (max.): 75 kg, tank capacity: 120 l, usable tank capacity: 60 l, input voltage: 400 V, rotational speed (min.): 50 rpm, rotational speed (max.): 180 rpm, power: 4 kW (5.44 HP), input current: 16 A, warranty duration: 12 months, Equipment: rotational speed infinitely variable, The Turbo-Line 120 “S” model has a stainless steel ejection box mounted directly on the deburring machine. When the bowl lowers, the chips fall through a grid while the parts to be deburred remain on top. This Turbo-Line machine includes a 120-litre drum with vertical, straight sides and a separate base that rotates at an adjustable speed, normally between 115 and 135 rpm, but adjustable from 50 to 180 rpm. During operation, the grinding bodies inside the bowl create a uniform, spiral movement reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and the base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. The 120 liter work bowl can process up to 50-60 liters of product per batch, depending on the shape and size of the parts. The deburring parameters such as time and speed are individually controlled via a manual touch screen. The addition of water and compound is done via a manually adjustable ball valve, which is included in the delivery. The finished products are discharged by tilting the bowl, a process controlled via the touch screen. The emptying speed is also adjustable via the frequency converter on the touch screen. Dcodpfjvvu Snsx Aqvjp

Condition: good (used), 1 x table grinding machine Sigg Polyfinish D 2 for small parts with 10 chambers. Accessories: 8 x plastic containers, 4 of which come complete with lid and holder. Further details to follow. The machine can be viewed under power. Dcjdpfsvpikxsx Aqvsp

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 1,200 mm, number of axes: 3, This 3-axis Reform Surface Grinder was manufactured in 1989. It features a working area of 1,200 mm x 500 mm, ensuring ample space for various grinding tasks. The machine is in very good condition and fully functional. If you are looking to get high-quality surface grinding capabilities, consider the Reform Surface Grinder we have for sale. Contact us for further details. - Manufacturer: Reform- Working Area: 1,200mm x 500mm- Year of Manufacture: 1989- Condition: Very good / Fully functional Dsdpfx Ajzb Eraoqvscp

Year of construction: 1990, condition: excellent (used), O F F E R Dsdexzuuvepfx Aqvjcp Subject to prior sale and errors excepted, we can offer you, without obligation, the following ex-stock: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Model: T Year of manufacture: 1990 _____ Grinding carriage center height: approx. 200 mm Grinding wheel Ø x bore: 200 x 30 mm Grinding wheel speed: approx. rpm Grinding wheel drive power: approx. kW Workpiece headstock center height: 160 mm Workpiece headstock longitudinal adjustment: approx. 100 mm Workpiece headstock transverse adjustment: approx. 200 mm Workpiece headstock swiveling either side: approx. 2 x 30° Collet chuck capacity: 0.5 – 20 mm Weight: approx. 500 kg Accessories / Special equipment: • Workpiece headstock swiveling for pointing and deburring • Collet chuck with approx. 10 different collets • Plexiglass safety guard for grinding wheel • Compact, free-standing on sturdy base • Optional cross-slide feed unit Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further tool grinding machines available from stock – please enquire!