Year of construction: 2023, condition: as good as new (ex-display), - Demonstration machine in mint condition- - 180° swivel head for rounding and deburring - Ergonomic working - Uniform rounding - Processing of small parts possible - anti-slip mat Iodeflvc Hopfx Aacetn

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS125, total width: 870 mm, total height: 950 mm, overall weight: 185 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 150 mm, workpiece length (max.): 150 mm, ZCVS 125 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 125 liter volume * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator Itjdpfx Aeh Agr Hoacon MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5011 & RAL 7036 *Epoxy paint is used to ensure long life of the paint

Condition: new, Machine for grinding, deburring, rounding and polishing, manual, mobile use with vacuum system, alternatively also with magnetic system, starter kit and 1 brush Itedpfxet Dpxbo Aacsn CE-certified, designed with double emergency stop circuit and reset system Weight 445 kg Dimensions 1435x1100x1510mm high Working height 950 mm Work surface 1280x780 mm Minimum workpiece dimensions 20x20mm Maximum workpiece height 120 mm Maximum width of workpiece: unlimited length, with maximum width 780 mm Maximum workbench load 100 kg Operation: Double manual operation Number of work stations 1 Quick holder for brush M14x2 left-hand thread M14x2 right-hand thread for abrasives Brush design Disk brush Ø150mm with quick-change system Various brush variants possible, depending on material, we will be happy to advise you. Bia2Qk2S2I Brush power 0.75kW frequency-controlled motors Brush motor speed 150 - 1500 r.p.m. Workbench Carpet / Special friction design Vacuum system fixation in the workbench (standard) Vacuum system kW 2.2 kW Also available with additional magnets as an option (available from stock) Electrical values Voltage V 400 V (3L+N+PE) Frequency Hz 50 Hz Current A 10 A Power kW 6 kW Plug-in device CEE 400 V / 16 A (5-pole)

Condition: excellent (used), Year of construction: 2005, Metal sander COSTA MOD. MA CCC 1150 Year of construction 2005 CE. Complete with nr. 3 abrasive belts. Iodpfjv Uqb Ajx Aacetn Sheet metal passage: mm 1150. Power: 40 kw. Working machine.

Condition: good (used), Year of construction: 1991, Shaker with triangular special stones Itedpjn I Rqcsfx Aacon

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: SN044264, Our SMD 3 series sanding and deburring machines score with flexibility and efficiency, even when deburring small parts. The SMD 3 P-Edition systems have been specially designed for thick sheet metal processing and deliver impressive performance in edge rounding up to a 2 mm radius thanks to maximum tool contact with the components. The upstream mechanical removal of slag from plasma and oxy-fuel cut parts is effective and reduces tool costs. Cool grinding also means that no heat is introduced into the workpieces. Machine from demonstration center Technical data SMD 345 DREE Passage width: 1350 mm Machinable material thickness: 1.0 -120 mm Load capacity: 500 kg/lfm Voltage: 400 V / 50 Hz Mains form: 3 + PE / 3 + PEN Isdpfsu Tgt Tjx Aacstn Rated current: 68.1 A Rated power: 30.0 kW Protection class: IP 42 Infinitely variable feed: 0.3 - 8.0 m/min Weight approx. 6000 kg Dimensions (W/D/H) approx.: 2170/3800/2260

Condition: excellent (used), Year of construction: 2010, operating hours: 10 h, functionality: fully functional, machine/vehicle number: G2372-13, working width: 900 mm, working height: 1,190 mm, grinding belt length: 1,900 mm, grinding belt width: 930 mm, The machine has been used little and has only 10 operating hours! TECHNICAL DATA Area of application: Grinding, removing, and calibrating workpieces Working width: 900 mm Grinding belt dimensions: 930 × 1,900 mm Table opening: 1 – 125 mm Raised table opening: up to 250 mm Constant working height: 1,190 mm Speed and feed rate Speed of units: 11 and 22 m/s Frequency-controlled feed rate: 4 – 11 m/min MACHINE DETAILS Machine weight: 2,100 kg Iedpfx Aaswa Ubcscstn Grinding equipment Grinding belt units: 2 Motor: Two-speed motor Contact roller height adjustment: Handwheel for adjusting pressure or belt thickness Height adjustment display: Electronic digital display of the feed table height in mm Motor for contact roller unit: for Finish Sanding Voltage: 400 V Phases: 3 Frequency: 50 Hz Total Current: 62 A Power: 31.68 kW EQUIPMENT - 2 sanding belts - Rubber-coated steel rollers - Dust extraction

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. * Control panel and dosing pump included. - The dosing pump automatically adds the chemical to the tank * Working hours timer Ijdpfx Aaow Hb Tfscjtn * PLC panel programmable on request * PU or INOX plate * Replaceable valve for wastewater drainage. * Inner tank features channels and cavities to ensure a non-stick wall.

Condition: new, Year of construction: 2023, functionality: fully functional, - 1 set of cleaning tools included with the machine Ijdpfx Aewpulaoacotn - 3-phase power supply - 5-pin electrical plug - Includes transport and storage trolley The support bar cleaner from BMZ ensures a longer service life of the support bars through multiple cleaning. It cleans quickly and easily, without the need to remove the bars for cleaning. This saves valuable time! Cleaning a complete pallet in the standard size of 1500 x 3000 mm takes about 30 minutes. With laser cutting machines with a pallet changer, users can even clean the bars while cutting. The BMZ Pro Cleaner removes slag from even heavily used bars and automatically adjusts to different slag thicknesses up to 25 mm. It is also suitable for stubborn stainless steel slag. Regular cleaning increases process reliability and the quality of the produced parts.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, For sale is a used AMADA model BR-610W deburring / wide-belt grinding machine, manufactured in Japan in 1998. The machine is in good technical condition and is designed for precise deburring and grinding of sheet metal. Technical Data (based on nameplates and technical parameters): ● Manufacturer: AMADA, Kanagawa Japan ● Model: BR-610W ● Year of Manufacture: 1998 ● Serial Number: 61200070 ● Working Table Width: 610 mm ● Wheel Motor Power: 5.5 kW ● Conveyor Drive Motor Power: 0.4 kW ● Conveyor Up Down Motor Power: 0.1 kW ● Oscillation Motor Power: 0.4 kW ● Coolant Pump Motor Power: 0.25 kW ● Spindle Drive Power (from technical parameters file): 16 kW ● Voltage: 230/400/460 V, 3 Phase ● Frequency: 50/60 Hz ● Total Motor Power: 18.98 / 28.65 / 19.84 / 27.41 (various power configurations for different voltages) ● Transformer: ○ TR1: STK0.28, Phase 1, Capacity 0.3 KVA ○ TR2: STK1.4, Phase 1, Capacity 1.2 KVA ○ Total Transformer Capacity: 1.5 KVA ● Machine Height: 1574 mm ● Machine Length: 2050 mm Ijdpjwrzvdjfx Aacstn ● Machine Width: 1317 mm ● Net Machine Weight (from nameplate): 1200 kg ● Machine Weight (from technical parameters file): 1.2 t

Condition: like new (used), Year of construction: 2019, 2 sanding units with inverter predisposition for 3rd unit Iedpjwqrtqofx Aacotn Suction table Working width 950 mm

Condition: excellent (used), functionality: fully functional, Enhanced finishing solution for metal 3D printed components EXTRUDE HONE technology opens the door to a very economical, fast, controllable, flexible, and environmentally friendly process for enhanced surface finishing of metal 3D-printed parts. We have a used machine in stock for immediate delivery. This machine has only been used briefly and is in excellent condition. Iodpfev Awrwox Aacjtn FEATURES and BENEFITS + Efficiency in enhanced surface finishing. Material removal rate (μm/min) faster than other methods on the market; e. g. up to 3 times faster than electro-polishing. + Tooling out of the printer. Tooling and fixtures are built at a reasonable cost since they are 3D-printed. + Highest flexibility. We provide a complete & optimized cathode and fixture design for your components within two working days. + Multiple material master packages Specific parameter files per alloy family. + EXTRUDE HONE Connect From CAD to part, remotely: loading of parameters, upgrading material packages, software, and maintenance. + Make it easy. The all-new and simple operating concept limits the data input to 4 simple parameters – parameters everybody understands.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1503, working width: 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 100 mm, workpiece length (max.): 4,000 mm, TECHNICAL DETAILS Working width: 1,000 mm Brushes: Fladder, grit 100 Maximum workpiece width: 800 mm Maximum workpiece height: 100 mm Maximum workpiece length: 4,000 mm MACHINE DETAILS Voltage: 3 × 400 V Frequency: 50 Hz Current: 50 A Protection class: IP54 EQUIPMENT - Vacuum carpet - Vacuum pump - Additional brush set, grit 100 Itjdpfx Aaswa T Saecon

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. Itjdsl Sm N Tspfx Aacsn The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: new, Year of construction: 2023, total length: 13,000 mm, total width: 8,000 mm, total height: 17,000 mm, workpiece weight (max.): 500 kg, overall weight: 600 kg, BMZ Manual Deburring Machine BMZ M1 Thanks to its vacuum table, the BMZ M1 allows for simultaneous deburring of multiple parts by hand. Two different brushes can be installed on the system, and changing the brushes is very quick and easy. Because the brush is positioned parallel to the table, it enables more even grinding. The system's motor weight is balanced, making it ergonomic for the operator. With the BMZ M1, you achieve maximum quality at a minimal cost. Application Areas Edge Rounding Deburring Slag Removal Oxide Layer Removal Itsdpfx Ajrp Dp Njacon Polishing

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, working width: 2,000 mm, sheet thickness aluminum (max.): 20 mm, Salvagini B3 Maximum bending length: 2000 mmMaximum force of the material to be bent depends on the length of the bend and the tools used, according to the calculation table for the bending press. Itedpjup T Ttefx Aacsn

Condition: used, Year of construction: 2008, working width: 800 mm, Grinding machines TimeSavers are designed for surface processing of parts up to 800 mm wide. Product fixation - vacuum. The machine is equipped with 2 stations: abrasive belt / brush. The equipment is suitable for grinding, edge rounding, oxidation and slag removal, final grinding. Technical specification: Model: Timesavers 41 series 900 WRD Year: 2008 Max. part width: 900 mm Max. part height: 80 mm Min. part height: 15 mm Speed: 1 - 10 m / min (adjustable) Iedpfjvyhttex Aacjtn CNC controller: adjustable speed, part dimensions, grinding pressure and more. Other: heater, can work in cold conditions If you have more questions, we will be happy to answer.

Condition: new, Year of construction: 2025, functionality: fully functional, MODEL KD-BR Minimum size of part 50mm Function Deburring , chamfering Electronic component schneide Bearing NSK Ijdevx Tllopfx Aacjtn Max working width 450mm 800mm 1000mm 1300mm 1600mm Max thickness 80mm transferred speed 1~10m/min power of lift motor 0.37kw/2 power of propeller motor 7.5kw/1 brush roll motor power 2.2kw/2 transferred motor power 1.5kw/1 Total power 26.64kw Diameter of brush roll 300mm NO. of brush roll 4 / 6 / 8 Machine size 2350*1450*2200mm Weight 2600kg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,980 h, functionality: fully functional, working width: 1,300 mm, Wet deburring machine Iedpfx Aasvfpvyjcstn TECHNICAL DETAILS Working width: 1,300 mm Working height: 900 / 1,000 mm Sanding belt length: 2,620 - 3,250 mm Number of units: 2 (sanding belt + vertical brushes (XVS)) Pre-treatment: Drying + air pressure Mist extraction: available Control system: PLC VISION

Condition: new, Year of construction: 2025, * 60 lt Capacity * 2,2 kW High performance three phase current drive motor. Itsdpfjh Nnbcjx Aacen * Adjustable speed control up to 200 rpm. * Control panel and dosing pump included. - The dosage pump automaticly puts the chemical to the bowl * Working hours timer * PU or INOX plate * Changeable valve for the wastewater decharging. * Inner bowl has canals and gaps for ensuring non stick wall.

Condition: new, functionality: fully functional, working width: 1,300 mm, warranty duration: 12 months, workpiece width (max.): 1,300 mm, RWT deburring machine possible configuration Ijdoudal Depfx Aacotn Four-station machine: 1. deburring with contact roller grinding belt 2. cup brush for oxide layer or slag removal 3. cup brush for edge rounding 3. finish sanding via contact roller The BSM series machines can be equipped with the following work units: Sanding unit with sanding belt (R) - removes burrs that protrude above the surface of the material, removes scale and corrosion from the surface Planetary disk brush unit (D) - rounds the edges, creates radii and removes the oxide layer on the sides after laser cutting. Rotary unit (A) with finned brushes - deburring and edge rounding without foil removal, surface uniformity. Brush unit made of abrasive fleece (B) - pre-cleans and polishes surface material These deburring machines are used for the following tasks: deburring parts after laser cutting - deburring edges, removing oxide and finishing the surface Deburring of parts after plasma cutting - slag removal, rust removal, removal of material overflows, edge rounding and surface finishing. Deburring of parts after punching - removal of sharp edges, edge rounding and final surface finishing. Deburring of parts after water jet cutting - deburring and rounding of edges, removal of marks after water jet cutting and final surface treatment. Deburring of stainless steel parts covered with foil - deburring and edge rounding without foil removal. Main advantages of the machine: Modular system - we design the machine exactly to your requirements High-quality and uniform deburring of all edges of the product Processing of very small workpieces with the magnetic or vacuum table Very easy operation of the machine thanks to the Schneider Electric touchscreen Grinding, deburring and finishing with one machine Very quick change of tools and rigid machine frame In view of the large number of possible machine configurations, we recommend a personal consultation and free grinding samples at our premises, which we use to assess our customers' requirements and then propose the most suitable machine configuration for the production in question.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2316-01, working width: 600 mm, Type 41 Series 600 WRD Working width 600 mm Ideal machine for deburring and finishing of metal products Equipped with grinding belt and disc/brush aggregate Ijdpfxor Nbpbs Aacotn

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) Itsdpjh I N Udofx Aacen * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer * Special construction of control panel(EU Standarts) included

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25-1361, total length: 775 mm, total width: 550 mm, total height: 775 mm, overall weight: 100 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 0.34 kW (0.46 HP), power: 0.35 kW (0.48 HP), workpiece length (max.): 525 mm, Equipment: CE marking, emergency stop, ZTV 50 Trough type vibratory machine * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. (Italian OLI Brand – 0,34 kW) * Changeable valve for the wastewater decharging * Control panel(EU Standarts) included Isdpfx Aswb Hhdjacetn * Main swicth and emergency stop switch. * Timer and working hours timer * CE safety standard * Dosing pump included. * The machine has noise isolation lid and metal machine cabinet - The cover is controlled by hand manually - The sound isolation cover provides significant noise reduction when the finishing process is in play. - It also curbs water or finishing compounds spillage from the vibratory finishing machine.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: Itsdpfx Ajrkmv Soacsn *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.