Used textile cutting machines for sale (52)

Condition: excellent (used), industrial automated cutter Powered by Gemini in very good condition. 2pcs on stock . Godpfx Aopxnyysfkobn

Condition: ready for operation (used), Year of construction: 1988, A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible. Gbedpfx Asu Afzwefkon

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Gsdjxmkcmopfx Afksbn

Condition: ready for operation (used), Year of construction: 2023, Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available. Gbjdpfxjwbuzfj Afkjn

Condition: excellent (used), type of input current: three-phase, input voltage: 400 V, We are offering this very well-maintained bullmer Premiumcut ELC CV textile cutting machine, year of manufacture unknown. Machine number: 1804 0128 Rated voltage: 400 V Frequency: 50,60 Hz Number of phases: 3 Ph / N / PE Connected load: 3.5 + 7.5 kW Mains protection: 50 A Control voltage: 24 V DC Circuit diagram number: 0911-40-ELC-30 If you have any questions or require further information, please feel free to send us a message or call us. Gbjdpfxeyc Ehko Afkon

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: C3030, type of input current: three-phase, total width: 1,900 mm, total length: 4,200 mm, input voltage: 400 V, input current: 50 A, feed length X-axis: 1,700 mm, feed length Y-axis: 1,700 mm, feed length Z-axis: 300 mm, working width: 1,700 mm, total height: 850 mm, repeat accuracy: 0.1 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 1 m/min, cutting width (max.): 1,700 mm, cutting height (max.): 80 mm, compressed air connection: 6 bar, Complete Textile Cutting & Spreading Equipment Line – KURIS, ZSK & MAYER – Automatic Cutter, Spreading Machines, Presses Professional textile production equipment available for sale, including automatic cutting systems, spreading machines, embroidery equipment, industrial presses, and accessories. All machines were used in industrial garment production and are available for inspection. Also available more than 200 sewing,ironing machines (Juki, Durkop Adler, Veit) Contact for more info. Location: Ruse, Bulgaria Delivery terms: EXW (Incoterms 2020) All prices are net prices (excluding VAT, dismantling, loading, and transport). Cutting Equipment 1 × KURIS C3030 Automatic Cutter KURIS automatic CNC textile cutting system. Like new condtion always serviced with original parts installed October 2019 Main Specifications Working width: 1700 mm Cutting height: up to 80 mm Automatic servo cutting system Vacuum table Industrial CNC control Suitable for textile and technical fabrics Set Price: EUR 45,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table Gbedpfxsy Tp Sij Afksn KURIS automatic servo cutter KURIS band knife machine Set Price: EUR 9,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 8,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Spreading Tables: 1 × 10-meter spreading table Price: EUR 500 1 × 8-meter spreading table Price: EUR 500 Plaid Fabric Cutting Table with Awl Special table for precise plaid/check fabric alignment and cutting. Price: EUR 2,500 Embroidery Equipment 1 × ZSK 10-Head Embroidery Machine Industrial multi-head embroidery machine by ZSK. Price: EUR 5,000 Pressing Equipment 1 × MAYER RPS-M 1000 Press Mayer industrial pressing machine. Price: EUR 8,000 1 × MAYER AHV-BM 1370 Press Price: EUR 4,000 1 × MAYER APM-1150 Press Price:EUR 4,000 Additional Information feel free to contact me (Viber,Whatsapp) Machines can be inspected under power Professional dismantling available upon agreement Loading assistance available Transport can be arranged separately Suitable for garment factories, textile manufacturers, upholstery production, and industrial textile processing All prices are net prices (excluding VAT, dismantling, loading, and transport) Contact: G. Jordanov Location: Ruse,Bulgaria

Condition: like new (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, type of input current: AC, total width: 3,000 mm, total length: 4,500 mm, input voltage: 380 V, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 150 mm, working width: 2,000 mm, total height: 3,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 3,000 mm, compressed air connection: 3 bar, High-Precision CNC Cutting Machine for Carbon Fiber Prepreg & Composite Materials Professional CNC cutting plotter designed for precision cutting of carbon prepreg, fiberglass, technical textiles, foams, leather, PVC, and other advanced composite materials. Ideal for aerospace, automotive, marine, motorsport, and composite manufacturing applications. The machine delivers extremely accurate and repeatable cuts while significantly reducing material waste and production time compared to manual cutting. Equipped with vacuum table technology for secure material fixation and clean, stable processing of delicate prepreg materials. Suitable for both prototyping and serial production. Key advantages: • High cutting precision and repeatability • Excellent for carbon fiber prepreg cutting • Fast and efficient production workflow • Clean edge quality without fraying or burning • Reduced material waste • Vacuum working table for stable material holding • Industrial CNC control system • Vacuum pump included • Suitable for complex geometries and nested parts • Reliable operation for composite manufacturing environments Applications: • Carbon fiber prepreg cutting • Fiberglass and aramid fabrics • Composite part production • Automotive and motorsport components • Marine composite manufacturing Godjy Tvatopfx Afkjbn • Aerospace applications • Technical textile cutting • Prototype and serial production The machine is in very good working condition and can be tested on-site. Vacuum pump is included in the sale. For additional information, technical details, videos, or pricing, please contact us.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: Parmel_042025PA, type of input current: three-phase, total width: 2,510 mm, total length: 5,770 mm, input voltage: 400 V, feed length X-axis: 2,500 mm, working width: 1,600 mm, repeat accuracy: 0.01 mm, feed rate Y-axis: 1,500 m/min, cutting width (max.): 1,600 mm, cutting height (max.): 50 mm, Single Ply Cutter – Fabric & Textile Cutting Machine Our single ply cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: Gsdpfx Aow N Rz Aofkjbn • Maximum cutting precision for samples, prototypes, and series production • Flexibility for different materials and formats • Efficiency thanks to short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model SC 1625 • Single-ply cutting up to 25 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double toolhead, needle punch kit, and plotting pen holder • Tool package: ERT, EOT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • JWCS CAD/CAM Control Software • Vacuum pump • Air compressor • Passive roll feeder for non-elastic fabric • Parmel Cutting Software • 12-month warranty We provide installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: new, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: Parmel_042025PA, type of input current: three-phase, total width: 2,510 mm, total length: 5,770 mm, input voltage: 400 V, feed length X-axis: 2,500 mm, working width: 1,600 mm, total height: 50 mm, repeat accuracy: 0.01 mm, cutting width (max.): 1,600 mm, cutting height (max.): 50 mm, compressed air connection: 4 bar, Single Ply Cutter – Fabric & Textile Cutting Machine Our single ply cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: • Maximum cutting precision for samples, prototypes, and series production • Flexibility for different materials and formats • Efficiency thanks to short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model SC 1625 • Single-ply cutting up to 25 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double toolhead, needle punch kit, and plotting pen holder • Tool package: ERT, EOT, VPT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • JWCS CAD/CAM Control Software • Vacuum pump • Air compressor • Passive roll feeder for non-elastic fabric • Parmel Cutting Software • 12-month warranty Godpfjyh R Htjx Afkjbn We provide installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 12C2221, TECHNICAL DETAILS Width of the worktable: 3,380 mm Gbedpoxlcguefx Afkjn Note: The digital nesting tableau is not included.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 636, type of input current: three-phase, total width: 1,800 mm, input voltage: 400 V, input current: 10 A, lifting height: 2,000 mm, load capacity: 250 kg, 31 C – Gerber LS-250-LU Automatic Fabric Loading System – Industrial Spreading Line Unit Description For sale is a Gerber automatic fabric loading system (Model 250 LU), designed for seamless integration into industrial fabric spreading and cutting lines. This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly improving workflow and reducing manual labor in high-volume production environments. The system has been operated as part of a complete and synchronized production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This setup allows a continuous workflow from roll loading to spreading and cutting, minimizing downtime and maximizing throughput. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video in working condition taken 5.3.2026. Includes • Gerber automatic fabric loading unit • Motorized lifting and roller feed system • Adjustable frame structure • Integrated control panel and switches • Heavy-duty steel frame with wheels Technical Details • Manufacturer: Gerber Technology • Model: LS-250-LU (Loading Unit) • Year: 2004 • Serial number: 636 • Type: Automatic fabric roll loading system • Lifting capacity: up to 250 kg • Machine weight: approx. 300 kg • Voltage: 3 × 380 V • Frequency: 50 Hz • Current: approx. 10 A System Functionality • Automated lifting and positioning of fabric rolls • Precise alignment with spreading machines • Smooth and controlled feeding into spreading systems • Mobile design allows flexible positioning between lines Production Advantages • Eliminates manual lifting of heavy fabric rolls • Improves operator safety and ergonomics • Reduces downtime during roll changes • Enables continuous, high-efficiency production flow • Ensures consistent material alignment for spreading Integration • Designed for use with Gerber spreading systems (e.g. SY 101) • Fully compatible with automated cutting lines (e.g. Lectra Vector systems) • Suitable for synchronized production environments Condition Used industrial condition Recently serviced on 27.02.2026 Operational prior to factory shutdown Gbodpfx Afjy Av H Seken Typical signs of industrial use Inspection recommended prior to purchase Sold as-is, where-is, without warranty Typical Applications • Fabric spreading lines • Textile production workflows • Cutting room automation • High-volume garment manufacturing Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional handling recommended due to size and weight

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Advantages Gbedey Avqdopfx Afken • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications Gedpjy Avg Ejfx Afksbn • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Gbodpfoy Au Hqsx Afksn Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism Gbsdpfx Aoy Au Alsfken • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. Gbodpfey Alcisx Afkon The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 75080154.1/TKT 2, type of input current: three-phase, input voltage: 400 V, input current: 40 A, 30 C – FINN-CONVEY V307 Conveyor 3-Level Table System – Modular Cutting Room Conveyor Description For sale is a FINN-CONVEY V307 conveyor 3-level table system designed for textile cutting room operations. This system functions as a modular conveyor-based table solution for material handling and fabric movement within production. It enables efficient workflow between spreading, buffering, inspection, and cutting stages. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). This integration significantly reduces manual handling and downtime, especially during fabric roll changes and feeding operations. The video material also shows a GERBER XLS-125-180-L Spreader (unit 32 C), which was used in the same production line. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Includes • FINN-CONVEY V307 conveyor table system • Multi-level conveyor structure (3 levels) • Integrated belt transport system • Drive motors and transmission units • Sensor components for positioning and control • Electrical control cabinet Technical Details • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor table system • Application: Fabric handling and transport in cutting rooms • Configuration: Multi-level modular system • Levels: 3-level buffer structure • Power: Industrial 3-phase system Key Advantages • Full integration with automated cutting systems (Lectra line ready) • Reduced manual labor in fabric feeding and handling • Continuous material flow for optimized cutting efficiency • Modular system adaptable to different production layouts • Industrial-grade mechanical construction for long service life Production Efficiency The 3-level buffer structure allows continuous operation of the cutting machine by maintaining a constant material supply. This reduces idle time and enables • Higher throughput in cutting operations • Efficient batch handling • Improved workflow synchronization across production stages Build Quality Finn-Convey systems are known for their robust mechanical construction, designed for long-term industrial use. With proper maintenance, these systems are built to operate reliably for decades. Condition Used industrial condition Fully functional prior to shutdown Gbodpoy Akpzefx Afkon Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Cutting room conveyor systems • Fabric transport and handling • Workflow optimization in garment production • Textile production lines Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: refurbished (used), Year of construction: 2012, We offer this refurbished Gerber GTXL fabric cutting machine, year of manufacture 2012. Manufacturer: Gerber Model: GTXL Year of manufacture: 2012 Condition: refurbished Category: 583 Type ID: 1492 Machine type: fabric cutting machine If you have any questions or require further information, please feel free to send us a message or call us. Gjdpjymgwhjfx Afkebn

Condition: used, Year of construction: 2018, operating hours: 15,471 h, functionality: fully functional, machine/vehicle number: KOMBO SDC+ 3.2, type of input current: three-phase, total width: 3,180 mm, total length: 2,030 mm, input voltage: 400 V, input current: 32 A, feed length X-axis: 3,180 mm, feed length Y-axis: 2,030 mm, feed length Z-axis: 2,030 mm, working width: 3,180 mm, cutting width (max.): 3,180 mm, compressed air connection: 8 bar, Equipment: CE marking, We offer this used fabric cutting machine, Elitron KOMBO SDC +, year of manufacture 2018. Model: KOMBO SDC + Serial number: 30516857 G Year of manufacture: 2018 Electrical power: 20 kW Electrical voltage: 400 V Current: 32 A Frequency: 50 Hz Phases: 2 Pneumatic pressure: 8/10 bar Weight: 4000 kg The machine is designed for precise cutting and creasing operations, suitable for rigid materials, and includes a 3 kW spindle. It is equipped with both pneumatic and electric oscillating blades, enhancing versatility for various cutting applications. Gjdpfxjylikhj Afkebn The cutting area measures approximately 2030 mm in length and 3180 mm in width, with a total weight of 4000 kg, indicating a robust and stable structure. Elitron’s proprietary software supports machine operation, enabling efficient workflow and control. This equipment is ideal for companies requiring reliable large-format cutting capability. Its configuration and features make it suitable for various industrial applications. Please note that no details are provided regarding maintenance history or warranty. All documentation (manuals, electrical diagram in PDF, manual in PDF) supplied at the time of purchase is included. The machine is presented in a clean and well-maintained industrial environment, currently in operation. You are welcome to inspect the machine in operation and carry out cutting tests at our facility. Dismantling and transport are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total width: 1,800 mm, total length: 5,000 mm, 1x CNC CUTTER CT-163MB V2 Effective working width 1650 mm Cutting window length 4500 mm Dsbig Eqasywzkxeaekk Total length about 6000 mm Design: stationary cutting machine, with linear guidance in the X and Y direction for high mass acceleration Brushless torque servo motors OMRON. Operating system Windows 7 Ultimate Gbodpjywzkxefx Afkjn 1 Laying machine Manual feeding of the laying wagon Inc. Edge control and automation. Cutting machine Supply via servo motor control assembly is carried out on the CNC cutter

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 4C0524, Lector Vectra 500 2004. No.: 4C0524 Reliable, very good machine! width: 180 cm length: 210 cm Gbedjw Am S Sopfx Afkjn CNC cutting machine

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 712537, LECTRA VT-FA-FX -72 CNC TEXTILE CUTTING MACHINE Year of manufacture: 2007 Height: 2.5 cm Width: 170 cm Window length: 185 cm With continuous feed. CNC control In well-maintained condition Gjdpfowzxx Usx Afkebn Video available upon request. With PostPrint printhead

Condition: used, Year of construction: 2007, functionality: fully functional, Lectra FX CNC cutting machine width: 170 cm length: 185 cm discharge conveyor: 200 cm CNC control Godpfjwzxz Njx Afkjbn

Condition: excellent (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, machine/vehicle number: TK3S25211612122, The machine is new, but it is code-locked by the manufacturer. The software does not function. 2500 x 2100 mm. Gbodpsx Exk Ssfx Afkjn

Condition: good (used), Good condition. Warranty & Delivery Component: complete delivery car The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 6-month warranty and a 5-year post-warranty. Worldwide Delivery We always have more than 1000 machines in stock so that each customer can choose from several options. 
With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses! Gjdelmnzqopfx Afkjbn