Fabric cutting machine

Lectra Vector 5000

Condition: good (used), Year of construction: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 - year 2005 - Useful cutting width 180 cm. - translating - new inverter device - in good condition. Lsdpfxjrtnccj Apmshi

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: Lhjdjtvau Aepfx Apmsi The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: new, Year of construction: 2025, Dürkopp Adler 867-190142-M – New – Direct Drive – Direct from Stock – €6,000 excl. VAT For sale: brand new Dürkopp Adler 867-190142-M, available immediately from stock. ✔ New / unused ✔ Equipped with M-TYPE direct drive motor – quiet, powerful, and energy-efficient ✔ Triple transport (lower, upper, and needle feed) for perfect material guidance ✔ Ideal for leather, upholstery, automotive interiors, and heavy materials ✔ Reliable top-quality German engineering from Dürkopp Adler ✔ Ready for immediate use in workshops or production Special price for quick sale: €6,000 excl. VAT First come, first served – available immediately Serious interest? Send a message to arrange a viewing or delivery. Quick buyers can expect fast handling and priority service. For more information or to arrange a viewing, feel free to send a message. Keywords: industrial sewing machine for sale industrial sewing machine wholesale sewing machine supplier professional sewing machines industrial sewing machine Lhedperni Snofx Apmei used industrial sewing machine sewing machines for businesses

Condition: used, Pellet press Lhedpfx Ajy E Rrbjpmoi Manufacturer: CPM Model: 7930-4 Year: 2019 Complete with feed mixers

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Lodpfx Aer Nfvmepmshi Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Lsdpfx Apowp E E Dsmehi Söderhamn 447 infeed 240-12 chipper canters Block tilt and infeed 240-12 chipper canter Euromill profiles Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: new, Year of construction: 2025, machine/vehicle number: 712520122, FRUMECAR ECA 3000 fully mobile concrete plant Lhjdjhd Na Uspfx Apmji Condition: NEW Capacity: 120 m³/h Mixer: Sicoma MAO Mixer size: 3 m³ Cement silos: 2 x 55 tons Guarantee: 1 year from startup More machines and mixing plants on our website Further information: Intended use: Construction industry Usable material: Concrete Overall condition: very good Technical condition: very good Visual condition: very good

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm Lsdowwtw Depfx Apmohi 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter Lhjdpfxem E I D Hs Apmoi machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SF100s.01.26, screw diameter: 200 mm, total length: 3,200 mm, total height: 2,200 mm, overall weight: 400 kg, heating capacity: 10 kW (13.60 HP), pressure: 2 bar, type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, warranty duration: 24 months, Machine for cheese streching, dozing, mozarella and other. Lhsdpfet I Dxwsx Apmei