Fabric cutting machine

Lectra FX POSTPrint

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Nedpfx Ajr Nfvmoc Ijld Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter Nodpsm E I D Hjfx Ac Isld weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Type HZPU 8000-3000/2100-S1 Year 1995 Nlodpon Awd Refx Ac Ijd Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SF100s.01.26, screw diameter: 200 mm, total length: 3,200 mm, total height: 2,200 mm, overall weight: 400 kg, heating capacity: 10 kW (13.60 HP), pressure: 2 bar, type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, warranty duration: 24 months, Machine for cheese streching, dozing, mozarella and other. Njdpfx Acet I Dxwj Ijld

Year of construction: 2009, condition: used, Mepac heavy duty vertical bagging machine for bulk productions. Njdpfoxt Ib Hox Ac Isld

Year of construction: 2023, condition: new, ! Machine offer for customers in Lithuania / Latvia / Estonia. The LVD PHOENIX laser is fiber laser cutting machine which combines high dynamics with flexibility for cutting thick material. PHOENIX is available in different sizes: 3m x 1,5 m, 4m x 2 m and 6m x 2m. Power source varies from 4kW to 20 kW. As standard machine is equipped with automatic shuttle tables, cutting head, adaptive collimation unit (until 12kW), capacitive height sensing, automatic nozzle cleaning, automatic sheet referencing, automatic cutting gas selection (oxygen, nitrogen and compressed air), chiller and fume extraction, SIEMENS control unit. The PHONEX laser cutting machines are compatible with huge range of automatization solutions such as loading / unloading and sheet storage (up to 6 meters), nozzles changer. Shuttle table All PHOENIX lasers come with automatic shuttle tables. The height of the table is 930 mm. The speed of table change depends on laser size: for 3015 – 35 sec., for 4020 -39 sec. and for 6020 – 48 sec. Tables on PHOENIX 4020 and 6020 models are split into 2m x 1m modules for easy replacement. Nlsdpfx Asiy N Npsc Iod Cutting head Laser source power on PHOENIX laser cutting machines varies from 4 to 20 KW (available: 4kW, 6kW, 10kW, 12kW, 20kW). The cutting head for 4 – 12 kW lasers could be equipped with 150 or 200 mm focusing lens, for powerful 20kW lasers – 250 mm focusing lens are used. Frame The PHOENIX 3015 model has a welded steel mono frame construction. This allows high accelerations without losing the accuracy. Due to the high frame rigidity, no special foundations are requested. The frame of PHOENIX 4020 and 6020 exists out of 4 parts. One rigid left and right frame that are connected with two bolted beams.

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above Nledpfxsg Rn Efs Ac Ied 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs.

Condition: good (used), Year of construction: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 - year 2005 - Useful cutting width 180 cm. - translating - new inverter device - in good condition. Nledpjrtnccjfx Ac Iod

Condition: new, functionality: fully functional, Year of construction: 2026, AT SERIES Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. Sheet&tube laser cutting machines A-T Series Function Enhancement Sheet&tube laser cutting machines A-T Series Expert High Speed Cutting Database Fast air cutting efficiency increases by 37% when cutting carbon steel. Sheet&tube laser cutting machines A-T Series Active Anti-collision Function Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Sheet&tube laser cutting machines A-T Series Bodor Lightning The lightning-quick piercing process combined perfectly with BodorGenius completes the whole piercing just during the laser cutter head moves down on Z-axis. Sheet&tube laser cutting machines A-T Series No Quiver when Cutting Thin Sheet The cutting process works even at the edge of thin sheets, and ensures no chatter marks. Sheet&tube laser cutting machines A-T Series Angle Steel and Channel Steel Cutting Angle steel and channel steel cutting are standard with no need fior additional installation. Sheet&tube laser cutting machines A-T Series Four-side Edge Searching, Higher Precision Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Mechanical Configuration Sheet&tube laser cutting machines A-T Series Stretching Aluminum Crossbeam Ultra-high-pressure stretching process and lightweight design; Rigidity increases by 60% ; Weight goes down by 20%; Laser cutter running speed increases by 50% Sheet&tube laser cutting machines A-T Series Modular Table The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Sheet&tube laser cutting machines A-T Series Penumatic Chuck Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Software BODORTHINKER BodorThinker BodorThinker is a high-end intelligent control system for a CNC laser cutter, featuring reliable stability, convenient installation and adjustment, safe production, multiple functionality, and robust performance. With BodorThinker, your laser cutting solutions can be modular, customized, automated and information-based. Design Nlsdpehtyutefx Ac Isd Industrial Design Award Winner "Oscar in Design", two of the top three world industrial design awards Remote Control A mango shape and convenient magnetic securing help you control with just one hand.

Condition: new, Year of construction: 2026, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Nlodpfx Aowd Emkec Isd Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Software NULINK The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Backrest EGS EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Tools: upper clamping, lower and bending beams The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person.