Year of construction: 2005, operating hours: 51,230 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: C130 86/357, The machine is currently being completely overhauled. All mechanical wear parts and repair parts are being replaced. The complete electronics will be brought up to date. Available from Q2 2025, the price is approx. 50% of a new machine Secure this unique opportunity. Contact us, we can also integrate your specific requirements. Technical data C130 Output: max 120 cartons Pitch: 5" Carton: max.100x85x150mm No. of Blister max.10 Blister stack height: max. 80mm Crob E H Systpazij Rjb Type of closure: tuck-in Code Reader:LEATUS 6012 with Scanner 2 Flap Discharge Conveyor GuK: Leaflet Folder

Condition: refurbished (used), Dear Sir or Madam, we have decided to sell our CoBall mill MSM-50, built in 1983. In 2022, the following was renewed: • All parts powder-coated • All bearings, seals replaced (original Fryma Kuruma parts) Crob E H Syjvvhl Ue Rob • New stator (original Fryma Kuruma) • VEM three-phase motor in Ex tc IIIC T125°C Dc Type: IE3-W43R 225 M4 Ex II 3D TPM VL WE HW 45 kW, 1475 rpm, 400V, Dr., 50 Hz, IP 55, Iso F • Zirconia grinding balls (ATM-Ceram 2.2 mm) Since the restoration, only around 4 tons of nougat cream have been produced with it. However, it turned out that another machine was more suitable for our application (viscosity too high). We also add a second, rarely used stator and a tested, functioning Danfoss frequency converter 45kW. The control is easy to implement with the Danfoss frequency converter.

Condition: used, Tank capacity (litres) 100 Motorized pumps Cjbjvpfhyj E H Sy Rorb Up to 2 external each tank Dosing capacity Max. 50 cc/sec. per pump Remote technical support

Year of construction: 1987, Condition: excellent (used), 1 piece chemical standard centrifugal pump with very few operating hours. Pump is suitable for acid condensate and aggressive acids. Also suitable for salt water! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Delivery volume: 250m³/h Head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of construction: 1987 Pump speed of 1480 rpm is also possible! Delivery rate approx. at 1480 rpm (information without guarantee) Delivery rate: 430m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and piping in stainless steel are also available Ceb Esh S Nz Se H Sy Rjrb The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: good (used), Functionality: fully functional, filter area: 0.836 m², overall weight: 274 kg, The Contherm scraped surface heat exchanger is an ideal solution for processing viscous, heat-sensitive, sticky or particulate products, used in industries such as food, chemical, pharmaceutical and cosmetics. This equipment is designed for a wide range of processes, including heating, cooling, pasteurization, sterilization, crystallization and phase change. Made of stainless steel AISI 316L. The Contherm is mounted vertically and is equipped with a rotor driven by an electric motor, with scraper blades ensuring uniform heat transfer. Tangential inlets and outlets allow smoother handling of the product, preserving its integrity. Additionally, the equipment is easy to maintain, as the rotor and blades can be lowered for inspection. It is highly efficient, capable of working with different heat transfer media such as steam, water or liquid refrigerants. Ideal for optimizing processes with complex products, the Contherm offers reliable performance and adaptability to different applications. Characteristics: Cob E H Souz Uymjy Rerb Model: 6x9 Heat exchange surface: 0,836 m2 Weight: 274 Kg 16 units available that are part of a complete rice pudding manufacturing line

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,000 h, Functionality: fully functional, total width: 4,000 mm, total length: 4,000 mm, total height: 4,000 mm, empty load weight: 1,500 kg, compressed air connection: 6 bar, Crushed styrofoam from the shredder (a part of the machine) or styrofoam in pellet form as raw material is transported to the silo above the machine. From the silo, the styrofoam passes through a section of the machine where it is sprayed with an additive and then dosed into bags for packaging. Csbsv A Squs E H Sy Rerb The additive tank contains agitators and heaters, and the additive is pumped from it up to the sprayers in the upper part of the machine. The machine, in addition to automatic and manual dosing options, also features a liter counter for additive consumption and a counter for filled bags.

Year of construction: 2018, operating hours: 200 h, Condition: like new (used), Functionality: fully functional, Very modern and flexible cartoner. Output max. 120 FS/min. Ceb E H Syot Iu H So Rorb Carton size [A x W x H] min. 30 x 15 x 65 mm max.180 x 105 x 250 mm The machine can be adapted to your requirements if necessary

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: PT 200 HL – D3000, SUBJECT OF CHARGE AND TECHNICAL DESCRIPTION: 1 pc Pressure tank 200 hl (PT 200 HL) - D3000 Upright, cylindrical container with arched bottom and lid (28011), resting on legs. Material 1.4301 Diameter 3000 mm Height of the cylindrical part 2150 mm, Unisolated, no duplicate 20710 L total volume operating pressure 3 bar Design regulation EN13445/68/EU Internal surface ground 2B, internal butt and corner welds ground Ra 0.8, butt welds bordered 50 mm wide Ceb E H Sou D Hu Isy Rorb The outer surface is pickled and passivated, the outer butt welds are ground to Ra0.8, bordered in a width of 50 mm Equipment of the tank according to the technical documentation Safety valve Vacuum valve CIP washing head DN32 Status sign Sampling cock DN8 Manhole Thermometer well Hanging eye 3 pcs Tubular leg, 4 pcs Bottom inlet/outlet DN32 terminated with flap DN32 sanitation inlet Documentation: 1 x in Czech language, pressure vessel passport Offer price for 1/piece.....15.999,- Euro + VAT Offer price for 2/piece.....29.999,- Euro + VAT

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Crob E Hshg Niqj Sy Rjb Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank

Year of construction: 2015, Condition: excellent (used), Functionality: fully functional, total height: 480 mm, base plate length: 1,020 mm, floor slab width: 450 mm, 2 pieces Horizontal, cross-split volute casing pump in process design, with radial impeller, single-entry, single-stage, Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with sealing water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! Operating parameters are specified on the type plate. Not the actual flow rate at the best point !!!! I have stored 2 characteristic curves as a photo. Photo 11: Best point Photo 12: Operating parameters from last application Flow rate: 6.9 m³/h Delivery head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data operating point for last application approx. Flow rate: 2.2 m³/h Crjbofyn Rps E H Sy Reb Delivery head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Volute casing: Noridur 1.4593 Housing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency. IE 2 Voltage: 400/ 690 Volt Speed: 2950 rpm The material 1.4593 Noridur is very well suited for: - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Year of construction: 2018, Condition: excellent (used), Functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. Cebevubape E H Sy Rsrb The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: excellent (used), loading space length: 318 mm, loading space width: 67 mm, loading space height: 57 mm, Supply air system Rox Lufttechnik HYD 0100 HKB Used goods, good condition, see pictures length 318 cm width 67 cm height 57 cm 800 m³/h Volume flow 3 kW Heating capacity 4.4 kW Cooling capacity Cooling and heating coil included 8 units in stock. Crsbotwz Ats E H Sy Rjb Negotiated price: € 800,-- net per unit ex stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: reconditioned (used), Year of construction: 2011, operating hours: 480 h, Functionality: fully functional, The C 2504 continuous motion cartoner is designed for the high-performance packaging of blisters. Automatic adjustment of all components that secure the packaging process. Gentle blister handling due to minimum drop height. Ideal guidance of the folding carton on the folding carton magazine. Convenient, functional and password-protected touchscreen user interface. Short changeover times when changing formats thanks to stored format data. Adjustment to blister width, stack height, folding carton dimensions and folding carton closure at the touch of a button. Operation of the entire machine including code reader, printer, integrated scales and camera via a central operating system. Ergonomic, GMP-compliant safety gate concept with fully opening swing doors Easy access to all functional assemblies thanks to folding carton magazine that can be moved up to 1.6 m in height Crsb E H Syor Dd Emj Rob Leaflet folder can be swung up or pulled out for servicing. Domino printing system included

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Tank diameter: 2250mm Creb E H Syjhg Nk Dj Rob heatable/coolable double jacket Enamelled tank

Year of construction: 2010, Condition: excellent (used), Functionality: fully functional, overall weight: 925 kg, drive type: Elektro, base plate length: 1,620 mm, floor slab width: 650 mm, product height (max.): 790 mm, rotational speed (max.): 1,465 rpm, 2 pieces Horizontal, cross-split volute casing pump in process design, with radial impeller, single-flow, single-stage, !!! Attention Data in the nameplate is the required operating point in the last application, it is not the best point of the pump !!! Manufacturer: KSB Model: CPKN-C3.1 100-400 Crsbjfyn Rhs E H Sy Rsb Year of manufacture: 2010 Last pumped medium: + water / 0.01%SO2/pH=2 + clean water Chemically and mechanically non-aggressive to materials Best flow rate: 120m³/h Delivery head best point: 52 meters (5.2 bar) Efficiency Best point: 67 % Flow rate operating point: 89.5m³/h Head at operating point: 55 meters (5.5 bar) Efficiency operating point: 63.5 % Pump speed: 1465 rpm Shaft seal: Double-acting GLRD Manufacturer: Burgmann Type: CARTEX-DN2/53-EX Material code: Q1Q1KMQ1/G1+BQ1VMG Operating mode: CB cartridge double GLRD with barrier pressurization Impeller type: closed multi-channel impeller Impeller diameter 396.0 mm Bearing bracket design: reinforced (heavy) Bearing bracket size: UP04 Bearing seal: Shaft seal ring Bearing type: Roller bearing Lubrication type: Oil on drive side Lubricant monitoring: Oil level regulator Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wearing wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: Duplex steel 1.4539 Nominal size of suction nozzle: DN 125 Discharge connection Nominal diameter: DN 100 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Gray cast iron Motor manufacturer: Siemens 1LG6 207 Efficiency class: IE 1 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power P2: 30 kW Shaft power operating point: 20.39 kW Shaft power best point: 24 kW Thermal class: F Motor protection class: IP56 Cosphi: 0.85 KSB mark: S6 according to KSB AN 1865-2 Surface preparation: Blasting, standard purity grade SA 2 1/2 Primer: 2-component epoxy zinc dust Intermediate coat: 2-component epoxy resin micaceous iron oxide Top coat: 2-component polyurethane (PUR) Color: Ultramarine blue (RAL 5002) KSB blue Total layer thickness approx. 260 µm The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: excellent (used), total length: 3,800 mm, total height: 2,370 mm, total width: 900 mm, Water treatment plant Cebetwzxne E H Sy Rorb Used goods, good condition, see pictures length 380 cm width 90 cm height 237 cm 2 Grundfos MG90LC2 pumps, Grundfoss pump 5 m³/h at 248.1 m height, 2 Grundfoss pumps 5.8 m³/h at 150.4 m height, Grundfoss pump 6 m³/h at 64.4 m height Grundfoss 6 m³/h pump at 140.2 m height Grundfoss 6 m³/h pump at 135.5 m height 2 disinfection units with UV-C lamps Filter cartridges and various measuring and control devices Negotiated price: € 2.500,-- net ex stock Goods are in stock. Transportation and installation possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: good (used), Year of construction: 2007, operating hours: 27,500 h, Functionality: fully functional, machine/vehicle number: 069/530, Uhlmann blister packaging system UPS 4 ETX for processing PVC forming films and aluminum cover films Basic machine in modular technology and balcony design, with 12 modules: - Forming film holder with 2 pneumatic tension shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for forming film - Forming film unwinding, timed - 3-zone contact heating: - 6 heating circuits, individually adjustable - simultaneous heating of min. 3 feeds - Heating plates open automatically when machine stops - Forming station with 4-column lifting table guide - Clamping pliers for securing the film strip when machine stops Crsb E H Sysvn R Ehj Rjb - Filling section with safety flap, length 1,360 mm - Covering film unwinding on operator side with pneumatic tension shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns Lifting table guide: - integrated overload protection - automatic lifting of the upper sealing tool when the machine stops - Cooling station - Free module for installing an additional station - Clamping pliers feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punch grid - Monitoring of the compressed air supply with machine stop if the minimum value is not reached - Machine cover - Electromechanically locked protective doors on the operating side made of acrylic glass with individual identification for open doors/ hoods and display in the operating panel - Protective covers made of corrosion-resistant material - Fast format change thanks to: - Plug-in format parts - Plug-in connections for cooling water supply

Condition: not inspected (used), Volume: Approx. 5000 L Type: Standing on three feet Tank diameter: 2100mm Crob Ejhg Nlpo H Sy Rsb heatable/coolable double jacket

Year of construction: 2009, Condition: refurbished (used), Functionality: fully functional, 1 piece liquid ring vacuum pump. Please read the description carefully to the end !!! The pump is not suitable for: Water, food industry and non-corrosive media. For these media, cheaper materials such as 1.4408 or 1.4571 are more suitable. The pump is made of the special material Alloy 59 !!! This alloy is used when the corrosion resistance of conventional chromium-nickel steels is no longer sufficient. Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Alloy 59 is used for: Environmental engineering, chemical industry (chemical processes with oxidizing and reducing acids, resistance to moist chlorine gas) and waste incineration plants. 2.4605 is mainly used in the chemical industry, the pulp and paper industry and in flue gas desulphurization plants. Excellent resistance to mineral acids such as nitric, phosphoric, sulphuric and hydrochloric acid and in particular to sulphuric/hydrochloric acid mixtures Typical applications are Ceb E H Syeigquto Rjrb -plant components for organic chemistry processes with chloride-containing media, especially when chloride-based catalysts are used -Multipurpose plants in the chemical industry -Plant components in the fine chemicals and pharmaceutical industries scrubbers, heat exchangers, dampers, fans and agitators for flue gas desulphurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for marine diesel engines -components for seawater and concentrated brines -equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -sulphuric acid coolers -Pipelines in geothermal power plants -Components in flue gas desulphurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/ 690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 ( Alloy 59 ) NiCr23Mo16Al All ball bearings new, mechanical seal refurbished by specialist company. Weight: 121 kg Dimensions: Length 960mm, width 370mm, height 370mm Connection: DN 50 ( 2")

Condition: excellent (used), total height: 1,600 mm, total width: 900 mm, total length: 3,800 mm, Water treatment plant Used goods, good condition, see pictures length 380 cm width 90 cm Height 160 cm consisting of: Grundfoss pump 6 m³/h at 135.1 m height, Grundfoss 6 m³/h pump at 140.2 m height, Grundfoss 6 m³/h pump at 64.4 m height, filter, UV-C disinfection unit and various controls Negotiated price: € 2.500,-- net ex stock Goods are in stock. Transportation and installation possible on request. Viewing possible at any time by appointment. Csb E H Syjtwzw Dj Rjrb Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Year of construction: 1997, Condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Crjb E Hjiuznuj Sy Rob Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: excellent (used), Year of construction: 1996, total length: 1,590 mm, total width: 780 mm, total height: 600 mm, power: 15 kW (20.39 HP), rotational speed (max.): 980 rpm, Vacuum pump Becker VTLF 500 Used goods, good condition, see pictures length 159 cm width 78 cm Height 60 cm 15 kW Suction capacity: 500 m³/h Speed 980 rpm Csb Eetwzvyo H Sy Rsrb Negotiated price: € 700,-- net ex stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: excellent (used), Drum magazine, driven second hand, good condition, see pictures diameter 138 cm height 155 cm Crsb E H Sotwzvasy Rsb Motor Stahlschmidt 0,18 kW 670 rpm 2 pieces in stock. Bargaining price: € 1.200,-- net ex stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: excellent (used), total width: 760 mm, total length: 970 mm, total height: 1,640 mm, Asys SMP01D + SHC01D transport system Used goods, good condition, see pictures length 97 cm width 76 cm Height 164 cm 230 V 50 Hz Negotiated price: € 1.800,-- net ex stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Cob Eotwzr Us H Sy Rerb Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: excellent (used), Year of construction: 2007, total width: 750 mm, total length: 1,280 mm, total height: 1,620 mm, power: 0.38 kW (0.52 HP), Asys SMP01D + SHC01D transport system Used goods, good condition, see pictures length 128 cm width 75 cm height 162 cm 230 V 0,38 kW 50 Hz Negotiated price: € 1.800,-- net ex stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. Crsb E H Systwzh No Rsb (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)