Cartoning machine

Uhlmann C 200

Year of construction: 2012, condition: used, pasteurizer with pipe heat exchanger 600 l/h (up to 80°C) with automatic control Godps Hnnhjfx Admstt storage tank for BiB with level control BaginBox filler with flow meter oil boiler 50kW mounted on braked trailer with tarpaulin max. weight: 1350 kg

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 Gtodpfx Adjwuddvomet C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Year of construction: 2011, condition: used, Voltage: 400V, connected load: 5.5kW, including tools, machine was completely overhauled. Gedpfedgvxajx Admott

Condition: excellent (used), Year of construction: 2013, operating hours: 24,666 h, functionality: fully functional, - Top functional packaging machine (thermoforming machine) of the PowerPak series. Gtjdpfx Adjua Hchsmot - Perfect for packaging pasta products. - Viewing under production conditions (packaging of gnocchi) possible at any time. - With matching feed belt and ExaktaPack brand scale (included). Technical details GEA PowerPak: - Film width: 350 mm lower web, 334 upper web - Approx. 12 cycles / minute - Forming tools: 1.1, 2.1, 2.2 - Rigid film, PP, PET, etc. - Bottom web preheating - Longitudinal and cross cutting with silent edge strip winding - Machine length approx. 9m - Draw-off: 60 mm - Busch vacuum pump (included) - Eject station and distribution pneumatic - Flow cooler for cooling form and seal stations. Additional information on request and/or inspection gladly possible.

Year of construction: 2021, condition: excellent (used), power: 10 kW (13.60 HP), input voltage: 415 V, belt width: 407 mm, product height (max.): 85 mm, Lomax TD 407 Double Drum Spiral Freezer – To Be Converted into 2 x Compact Single-Drum Spiral Freezers We are offering a Lomax TD 407 spiral freezer, originally supplied as a double-drum configuration, which will be professionally split into two independent single-drum compact spiral freezers. Each machine will be supplied as a stand-alone compact spiral freezer, ideal for food producers looking for efficient freezing capacity with a smaller footprint. Conversion scope includes: Separation of the existing double-drum system into 2 individual single-drum spirals Independent drum, belt and tensioning system per machine Separate infeed and outfeed per unit Machines configured to operate independently Suitable for installation in existing production environments This conversion provides a cost-effective solution for customers requiring compact spiral freezing without investing in a brand-new system. 📍 Machine currently located in the UK 📦 Available as two separate machines following conversion 📩 Further technical details, layouts and pricing available on request Gedpfx Aotzmk Njdmett Year of manufacture 2024 304 Stainless steal mesh belt Product gap 85m Tier pitch 140mm 1.62m Drum 24 Tiers on up drum 24 Tiers on down drum Belt Width 407mm Effective Belt Width 337mm

Year of construction: 2014, condition: refurbished (used), REEPAK REEFLOW 250 ID.NO. 2050 Reepak mod Reeflow 250 flowpack machine from 2014 which has previously packed apples but is suitable for all kinds of food etc. Dimensions max packaging L 600 x 250 mm H 100 mm. NOTE THE MACHINE IS IN NEW CONDITION! Dimensions 570 x 145 H 205 cm. Gtodpfx Adog Rcabemot

Year of construction: 2000, condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Gsdpfxofc I Hae Admott Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH More technical details you found in the Datasheet.

Condition: good (used), Year of construction: 2014, Coffee Cartridge Filling and Packaging Machine Complete and in good working condition Overhead hopper feed. Gedpfxjucf S Tj Admstt Automatic online depositor Speed 300 packs / hour Complete with Simens Touch Screen Controller Hot melt carton gluer

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Frozen Meat Grinder LASKA WWB 200 with LASKA BA 24 Column Loader Frozen Meat Grinder LASKA WWB 200 Manufacturer: Maschinenfabrik LASKA GmbH Model: WWB 200 Year of manufacture: 2009 Serial number: 13129 Power supply: 3 × 400 V / 50 Hz Rated power: 68 kW Current consumption: 130 A Dimensions: 2500x1700x2000mm The LASKA WWB 200 is a high-performance industrial frozen meat grinder designed for processing whole blocks of frozen meat (often without prior thawing). It allows high-throughput processing of large quantities of raw material in a short time, making it ideal for use in large-scale meat processing plants and industrial food production facilities. LASKA BA 24 Column Loader Manufacturer: Maschinenfabrik LASKA GmbH Model: BA 24 Year of manufacture: 2007 Serial number: 12432 Power supply: 3 × 400 V / 50 Hz Rated power: 1.5 kW Current consumption: 3.5 A Gtjdjxbt Nljpfx Admet Height: 2850 mm The BA 24 column loader is used for the automatic loading of standard Euro bins or cutter trolleys directly into the feed hopper of the main machine (e.g. the WWB 200 grinder). It ensures ergonomic and safe operation for operators.

Year of construction: 2015, condition: ready for operation (used), A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible. Gtjdjv Scrbepfx Admjt