Used machining centers (vertical) X-axis travel 1200-1699mm for sale (193)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,080 h, functionality: fully functional, machine/vehicle number: 2390012, travel distance X-axis: 200 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 425 mm, spindle speed (max.): 17,500 rpm, number of slots in tool magazine: 184, tool length: 300 mm, tool weight: 10,000 g, Equipment: chip conveyor, System consists of the main machine SW BA 442 and 2 robots (M-10iA + M-20iD)! Including equipped tool magazine with extended capacity! TECHNICAL DETAILS Control: Siemens 840D SL Axes: 4 axes Change pallet: 2 swivel axes with 4 mounts each Spindle distance: 200 mm X-axis: 200 mm Y-axis (change position): 500 mm (775 mm) Z-axis: 425 mm Feed drive Design: three-phase synchronous motors Distance measurement (X, Y, Z): direct, absolute Rapid traverse speed X / Y / Z: 55 / 70 / 70 m/min Acceleration X / Y / Z: 8 / 8 / 12 m/s² Forces Peak force (X, Y): 15,000 N Peak force (Z): 12,000 N Nominal force (X, Y): 10,000 N Nominal force (Z): 7,000 N Accuracy Position tolerance (X, Y, Z): Tp = 0.008 mm Workpiece holder Design: Double swivel carrier (Q axis) with two directly driven NC rotary axes (A/U axis) Swivel time (0/180 degrees): 3.5 s Maximum asymmetrical load: 500 Nm Repeatability (at Ø 500 mm): < 0.006 mm Rotary axes (A/U axis) Maximum dimensions of fixture and workpiece: Ø 550 mm x 1,030 mm Maximum fixture and workpiece weight: 450 kg Peak torque: 870 Nm Nominal torque: 440 Nm Maximum speed: 50 rpm Angular acceleration: 3 / 6 / 12 U/s² Parting accuracy: ± 5'' Tangential moment: 3,000 Nm Spindle Arrangement: horizontal, side by side Design: motor spindle, liquid-cooled, AC synchronous technology Main spindle Ø: 40 mm Spindle lubrication: oil minimum quantity lubrication Tool system Interface: HSK-A63 Tool clamp nominal pull-in force: mechanically operated, > 18 kN Wear limit: 16 kN Setting dimension: 10.5 ± 0.1 mm Pneumatics: cleaning air, planar contact control Cooling lubricant: central, emulsion, oil, < 80 bar Minimum quantity cooling lubricant: aerosol, < 5 bar Gusdpfx Ajvt Tyroayjk Speed and power Speed range: 1 - 17,500 rpm Ramp-up time: 1.2 s Power: 4 x 32 kW at 4,200 rpm or 40% ED Nominal power: 4 x 25 kW at 4,200 rpm Torque: 4 x 72 Nm at 40% ED Nominal torque: 4 x 55 Nm Tool magazine Change system: pick-up Tool management: fixed location coded Capacity: 182 tools (4 x 46) Tool diameter with/without free neighbor: 150 / 80 mm Tool length: 300 mm Tool weight: 10 kg Maximum total tool load: 720 kg Average chip-to-chip time (n < 10,000 min⁻¹): 3.0 s MACHINE DETAILS Installation space (W x H x D): 4.38 x 5.00 x 7.00 m Machine weight in operation: 22,000 kg Transport weight: 14,500 kg Measuring surface sound pressure level (DIN EN 12417:2007): ≤ 75 dB(A) Switch-on time: 34,823 h Spindle time: 14,080 h Electrical connection data Connection voltage: 3 x 400 V, 50 Hz (earthed) Connection type: TN-S or TN-C network Total connected load: 123 kVA Rated load factor (RDF): 0.6 Back-up fuse: 160 A gG (5 s) Coolant supply Chip conveyor: Knoll make Coolant supply/filter system: Knoll make, type 800K-1, year of manufacture 2016

Condition: used, Hwacheon mod Sirius III - 1250 Gsdpfx Aswwwu Hoaysuk Table 1400 * 700 X 1100 mm Y 700 Z 650 Cambio utensili / Toolchanger 30 pos ISO 50 8000 RPM max 30kW CNC Fanuc 18iMB Still under power on the shop floor

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,400 h, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 40, mount diameter: 40 mm, Equipment: chip conveyor, High pressure 20 bar MACHINE EQUIPPED WITH: Godpfjxb Rtbex Aayeuk 4 vices + 40 cones + arbors + tools

Year of construction: 2003, operating hours: 4,689 h, condition: reconditioned (used), functionality: fully functional, 2023 comprehensively overhauled: - Spring assembly spindle renewed - Rotating union renewed - trackball renewed - Life support battery renewed - Graphic card regenerated - X-axis bearing new - backlash X-/Y-axis 0,015mm TECHNICAL DETAILS X travel: 1270 mm Y travel: 660 mm Z travel: 610 mm speed: max. 8.000 rpm table load: max. 1300 kg table size: 1500x660 mm tool changer: 24-fold/double arm tool holder: SK 40 DIN69871 Control: Ultimax 4 control MACHINE DETAILS spindle hours: 4.689 h, machine ran only 1 shift drive: 15 kW machine weight: approx. 9 t space requirement: approx. 4,8 x 4,5 x 2,95 m EQUIPMENT - Coolant system - Cooling through the spindle (IKZ) 20bar - chip conveyor - machine light Gjdpfxjl D Rubo Aayeuk - 2x color screens (working) - Removable electronic handwheel SOFTWARE - Pocket milling with islands - Synchronous tapping without compensating chuck - DXF software - 3D contouring software - Ultinet - Advanced Velocity Control - Plunge Ramp/Helix

Condition: used, Vertical Machining Center MAZAK VTC-20B – Year of manufacture: 1998 • CNC Control: Mazatrol M Plus • Axis Travels: X = 1660 mm, Y = 510 mm, Z = 510 mm • Spindle: • Taper: ISO 40 • Max speed: 7,000 rpm • Power: 7.5 kW • Tool Changer: • 24-position automatic tool changer • Feed Rates: Gujdpfjwdrftex Aayok • Rapid traverse on all axes: 30,000 mm/min • Table: • Size: 2000 x 510 mm • Max load: 500 kg • Cooling System: • Standard integrated system • Dimensions & Requirements: • Footprint: approx. 3200 x 2700 x 2800 mm • Weight: approx. 5200 kg • Compressed air: 6 bar • Note: Machine in full working condition, available for inspection on request

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: EK 70282, travel distance X-axis: 1,250 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 15,000 m/min, rapid traverse Y-axis: 15,000 m/min, rapid traverse Z-axis: 15,000 m/min, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, total height: 3,266 mm, total length: 5,300 mm, total width: 5,000 mm, overall weight: 12,800 kg, spindle speed (min.): 6,000 rpm, input voltage: 400 V, power: 36 kW (48.95 HP), Used Ekkon Sigma EK 110/50 – Model year 1999 – for sale For sale: Ekkon Sigma EK 110/50, model year 1999. The machine has been regularly maintained, and a defective circuit board has recently been replaced. It is fully functional and can be seen in operation. Technical specifications: Gsdsvy S Nfopfx Aayouk Control system: Heidenhain TNC 426 PB Tool changer: 41 tools Extra table: Enables preparation of the next workpiece during machining Important conditions: The buyer is responsible for dismantling and transport. No warranty or liability for damage that may occur during transport. If you are interested or for more information, please contact me.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,517 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 48, Bidding obligates the buyer to pick up the vehicle on time by May 30, 2025. Disassembly and loading available for an additional charge. Geometry report available! TECHNICAL DETAILS X-axis travel: 1,300 mm Y-axis travel: 800 mm Z-axis travel: 650 mm Control manufacturer: Fanuc Feed rate: 24,000 mm/min Clamping table Table dimensions: 1,550 x 800 mm Spindle-to-table distance: 250 - 900 mm Table load: max. 2.5 t Workpiece size: 1,550 x 800 x 550 mm Spindle Spindle speed range: 50 - 20,000 rpm Spindle power: 18.5 kW (S6) Torque: 95 Nm (S6) Tool holder: HSK63 Number of tool positions: 48 Coolant system External coolant pressure: 7 bar Internal coolant pressure: 40 bar Accuracy Positioning accuracy: ± 0.0025 mm Repeatability: ± 0.002 mm Gedpfxowgbx Us Aayeuk MACHINE DETAILS Width: 3,850 mm Depth: 4,090 mm Height: 3,560 mm Machine weight: 16,000 kg On-time: 38,291 h Machining time: 20,068 h Program on-time: 24,725 h Spindle on-time: 24,517 h EQUIPMENT - Electric handwheel - Chip conveyor - Paper belt filter - Internal & external air supply - Marposs infrared sensor - Preparation for oil mist extraction - Blum tool measurement with laser - Work area flushing - Manual flushing gun - Coolant temperature control - Machine documentation - Geometry report A separate tool changer can be used for dismantling and loading. Service providers can be arranged. Price: approx. €8,000

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: SELCA, controller model: 3045, table width: 600 mm, table length: 2,000 mm, spindle speed (max.): 10,000 rpm, spindle nose: 40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Table dimensions: 2000x600 mm Capacity Gedpfx Aaovzarqsysuk Longitudinal X-travel: 1600 mm Cross Y-travel: 600 mm Vertical Z-travel: 600 mm Spindle Spindle nose: 40 ISO Spindle speed: 10000 rpm. Tool Stations: 30 no. ACCESSORIES: With double chip auger, remote control, axes lubrication control unit.

Condition: used, Year of construction: 2003, operating hours: 3,718 h, functionality: fully functional, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, rotational speed (min.): 8,000 rpm, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, HIGH PRESSURE CTS20 BAR 4/5 AXIS TABLE Godpfxjxb D Aio Aayjuk

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 35,600 m/min, rapid traverse Y-axis: 35,600 m/min, rapid traverse Z-axis: 35,600 m/min, workpiece diameter (max.): 127 mm, number of slots in tool magazine: 31, tool length: 330 mm, Haas VF-4SSHE – Vertical Machining Center The Haas VF-4SSHE is a high-performance vertical machining center, manufactured in 2007, equipped with Haas CNC control. Ideal for fast and precise machining, it offers generous work capacity and a compact structure. Main technical features: Axis travel: X = 1,270 mm, Y = 508 mm, Z = 635 mm Spindle: ISO-40, 12,000 rpm, 22.4 kW Spindle – table distance: 107 ÷ 742 mm Godpewt Ripefx Aaysuk Rapid traverse: 35,600 mm/min Feed rate during machining: 21,200 mm/min Table: Dimensions: 1,321 x 495 mm Load capacity: 800 kg Tool changer: Tool type: BT-40 Magazine capacity: 24 positions Max tool diameter (adjacent/free): Ø64 / Ø127 mm Max tool length: 330 mm Max tool weight: 5.4 kg Additional equipment: 4th axis – Haas rotary table Ø 310 mm High-pressure coolant pump through the spindle Tank with wash pump Spindle cooler Screw-type chip conveyor Manuals, electrical diagrams, and CE declaration Machine dimensions: L 4,100 mm × W 2,600 mm × H 2,690 mm – Weight: 6,250 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 840 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, torque: 140 Nm, controller manufacturer: Siemens, controller model: 840D-SL, rotational speed (min.): 12,000 rpm, tool length: 370 mm, power: 22.5 kW (30.59 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine can be viewed in operation at any time. Guedjtdnnqspfx Aayek Bridge dimension 1250mm Working table swivels +/- 120 Table diameter 280mm Rotary table speed 200 rpm Workpiece weight max. 320kg Tool holder HSK63 Spindle speed range 12,000 rpm Spindle drive 7.5 / 22 KW Torque 140 Nm gr. tool length 370mm Tool diameter 75/160 mm Tool weight 8kg Rapid traverse 60 m/min. CNC SIEMENS 840 D-SL Software: Teleservice Software: 5-axis simultaneous 24-fold tool changer NC swivel bridge, clamping length 1050 x 250 mm. 2-axis swivel device CHIRON CASD 280 / 4th and 5th axis, pitch 0.0001° Clamping hydraulics through table center 200 bar Workpiece support control ( Airsensoring ) CHIRON Lasercontrol F295 Automatic central lubrication Automatic work area door Electrical interface PROFIBUS for robots Coolant package Internal coolant supply 38 bar Coolant tank 900 l Paper belt filter device Chip conveyor As the object of purchase is a used item, the sale is made under exclusion of any liability for material defects and/or resulting consequential damage, regardless of the legal grounds.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Control HEIDENHAIN iTNC620 with 15” LCD screen Table size 1500 x 670 mm Table load 1300 kgs X travel 1300 mm Y travel 670 mm Z travel 625 mm Max spindle speed 12 000 rpm Spindle power 32/15 kW Max. torque 203 Nm ATC magazin 30-fold Tool holder type SK40 Big Plus Tool change 1.2 / 3.2 sec. Rapid feed (X/Y/Z): 36/36/30 m/min. Max. tool sizes D80 x 300 mm Power required 40 kVA Machine weight 8500 kgs Dimensions LxWxH = 3350 x 2600 × 3120 mm Features, accessories - Coolant unit - CTS 20 bar - Spindle cooler - Chip conveyor Gsdsv Tpyhopfx Aayeuk - 4. axis prepared - Portable MPG - CE mark - Transformer - Machine mounts - Manuals The machine is in good working condition.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: SE.PH.A00.85, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS X-axis travel: 1,600 mm Y-axis travel: 1,200 mm Z-axis travel: 600 mm Axis feeds: 0 – 30,000 mm/min Spindle Tool holder: HSK A50 Speed range: 6,000 – 20,000 rpm Max. power: 15 kW Distances Table surface – floor: 920 mm Table surface – spindle nose: 810 mm Table surface – spindle nose: -15 – 585 mm Table Length: 1,320 mm Width: 800 mm Max. permissible load: 2,000 kg Number of T-slots: 4 T-slot width: 14 H7 T-slot center distance: 120 mm MACHINE DETAILS Gjdpswvi Sbofx Aaysuk Length × Width × Height: 4,140 × 2,325 × 3,450 mm Weight: 9,500 kg Compressed air: 1,200 l/min Pressure: 6 bar

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, controller model: itnc 320, table load: 2,500 kg, rotational speed (min.): 6,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, Used Sigma EK110/50, regularly maintained, with new Heidenhain iTNC320. The machine can be inspected under power. Gujdowurr Ijpfx Aayjk

Condition: excellent (used), Year of construction: 2018, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, table width: 670 mm, table length: 1,500 mm, DNM 6700 with fanuc control BT 40 shank with the below options : -12.000 rpm Guedpfxjw El U Re Aayek - TSC 70 bar - Data Server 1 GB - ACC II - Renishaw Touch Probe OMP 60 - Air blower -Automatic power off

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Guodpfx Ajuu Rf Dsayek Accessories - Chip conveyor - Coolant unit - RENISHAW TS27 tool presetter - RENISHAW OMP60 zero point setting system - Manuals The machine is still in production but will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: like new (used), Year of construction: 2018, operating hours: 11,300 h, functionality: fully functional, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, controller model: itnc 530, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, rotary table diameter: 1,100 mm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 80 bar, number of slots in tool magazine: 30, MIKRON HPM 1350U, 2018, machine is under service contract, fully functional under power. IKZ 80 BAR, Renishaw probe, laser measuring, kinematic OPT, OSS cycles. Geometry report available Guodev Ibtcepfx Aayek

Condition: used, Year of construction: 2009, Spinner VC 1460 vertical machining center Year: 2009 Control: Siemens 840D-SL Table length: 1620 mm Table width: 610 mm X: 1460 mm Y: 610 mm Z: 500 mm Spindle taper: ISO40 Speed maximum: 12000 rpm Maximum table load: 800 kg Positions in tool magazine: 32 Machine weight: 9300 kg. Accessories/options: spindle cooler swarf conveyor tool holders vice Guedpfx Aox Ew Hrjaysk documentations coolant tank through spindle coolant