Used machining centers (vertical) X-axis travel 1000-1199mm for sale (370)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 93,500 h, travel distance X-axis: 1,180 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, overall weight: 11,820 kg, spindle speed (max.): 10,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Internal coolant supply • Chip conveyor Extra Information Djdpox T Dgnefx Aqvecp The machine is mounted on a beam and has not been connected to the mains since November 2025!The buyer purchases the item subject to the exclusion of any liability for material defects!The spindle was replaced in 2022 for approximately 20,000.00 euros!The spindle has clocked up only approximately 1,400 hours since thenMaterials machined: steel, 90% moulding plates Technical Specification Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2003, control: Ultimax tool taper: SK40 table size: 1270 x 610 mm travel: x-1060; y-610; z-610 mm spindle speed: 10000 rpm 40 fold tool changer Dcedjitk I Uepfx Aqvjp internal cooling chip conveyor accessories: 2 hydrl. vices, div. tool holder

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table load: 900 kg, overall weight: 6,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Bridgeport VMC1000 XP3 was manufactured in 2005. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a worktable with dimensions of 1200 × 600 mm and a maximum table load of 900 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC1000 XP3 vertical machining centre we have for sale. Contact us for further details. • Worktable dimensions: 1200 × 600 mm • Rapid traverse: X 43 m/min, Y 43 m/min, Z 36 m/min Dedpfxs Agvnre Aqvocp • Electrical: 415 V, 50 Hz, Full load current 58 A, Short-circuit rating 25 kA Additional equipment • Chip conveyor with auger discharge chute Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: HEIDENHAIN TNC-640, table width: 870 mm, table length: 3,500 mm, table load: 3,500 kg, overall weight: 24,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 900 mm, spindle motor power: 32 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 76 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED DOOSAN VCF 850L-II traveling column machining center with HEIDENHAIN TNC-640 CNC Dodpfxew Dcl Rs Aqvocp

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC640, spindle speed (max.): 10,000 rpm, We offer in good condition with around 2.500 spindle hours Posmill CE1000 with following options: Heidenhain linear scales in X, Y and Z-axis Heidenhain TNC 640 control Air true spindel Dsdpoyindaefx Aqvocp Spindel 10.000 RPM ISO40 Tool changer 40 tools ATC Belt filter with Internal coolant 20 bar Hexagon Touch probe Hexagon tool probe Chip conveyor Thermal spindel compensation Z-axis Technical specification:" X-Axis Travel: 1060 mm Y-Axis Travel: 600 mm Z-Axis Travel: 600 mm Machine is within new tolerence and geometry protocol is available.

Condition: excellent (used), Year of construction: 2013, Manufacturer: SPINNER Model: MVC 1000 Year of manufacture: 2013 Control system: Heidenhain Travel ranges: X-axis: 1,000 mm Y-axis: 500 mm Z-axis: 570 mm Work table: Table size: 1,200 × 500 mm Maximum table load: 800 kg Spindle: Maximum spindle speed: 10,000 rpm Tool holder: SK40 Tool changer: 24 tool positions Rapid traverse: X-axis: 24 m/min Y-axis: 24 m/min Z-axis: 20 m/min Operating hours according to the control system: Control system on: 10,127 hours Machine on: 9,288 hours Program runtime: 3,047 hours Spindle runtime: only 2,649 hours ----- Equipment and accessories The machine is sold with extensive accessories. Included in the scope of delivery: * Chip conveyor * 3D probe * 2 chucks (see pictures) * Various SK40 tool holders * Other accessories as shown in the pictures Inspection and further information: The machine is in good used condition and has only 2,649 spindle hours. An inspection and a trial run under power are possible at any time after prior arrangement. Dcodpfez R I R Nex Aqvop If you are interested, we will gladly provide you with further pictures, videos and technical information.

Condition: used, Year of construction: 2018, operating hours: 19,432 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol Smooth G, workpiece weight (max.): 1,200 kg, total height: 2,810 mm, total length: 3,650 mm, total width: 3,100 mm, table width: 550 mm, table length: 1,300 mm, overall weight: 6,800 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,454 h, number of slots in tool magazine: 30, input voltage: 19 V, Equipment: chip conveyor, documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol Smooth G Machine tablesize: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Dodpfozx S I Ujx Aqvocp Z-axis travel: 510 mm Spindle speed: 35 - 12.000 rpm Spindle: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor belt left - Cooling by the spindle 15 bar - Kitagawa NC Rotary table MR 200 - Spindle total time 3.454 hours If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, operating hours: 10,000 h, functionality: fully functional, The used KONDIA HM-1060 high-speed vertical machining center is a medium-sized, numerically controlled machine with a cast iron gantry structure, weighing approximately 7,300 kg. It has travels of X 1,000, Y 600, Z 510 mm, a table size of 1120 × 600 mm, and a load capacity of 660 kg, with rapid traverse rates up to 24 m/min. It features a cast iron structure with support on 3 points for improved thermal compensation, a SELCA 4045 CNC control with a color LCD, a network interface, a hard disk, and a BT-40 spindle at 10,000 rpm, cooled by a dedicated chiller. It also includes an 18-position pick-up tool changer, a remote handwheel, and a conveyor chip evacuator. Dcedjz I Dvaopfx Aqvjp Year of manufacture: 2006, complete with manuals and certification.

Condition: excellent (used), Huron KX30 HSM CNC Vertical Machining Centre Heidenhain CNC control 78.7" x 31.5" x 31.5" travels 20,000RPM spindle 50kW power 40 Tool automatic tool changer Spindle taper BT40 Year 2001 Chip cnveyor Coolant filtration system Weight 17,000kgs Djdpfx Ajz Hdvdoqvocp

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DMG Deckel Maho DMC 1035 V Vertical Machining Center. The machine is in very good optical and technical condition. Inspection while powered on is possible at any time. Technical data: Year of manufacture: 2008 Control system: Heidenhain iTNC530 Travel distances: X: 1,035 mm Y: 560 mm Z: 510 mm Clamping area: 1,200 mm x 560 mm Spindle speed: 10,000 rpm Tool changer: 20-position Tool holder: SK40 Coolant/air blast switchover Electronic handwheel Operating mode 4 Coolant tank free on truck ex works Hagen Dsdjzun Snepfx Aqvscp

Condition: good (used), Year of construction: 2014, Spinner MVC1000 machining center, with 4.axis Year: 2014 Technical details: Travel X/Y/Z: 1000mm/500mm/570mm Table dimensions X/Y: 1200mm/500mm Max. workpiece weight: 800kg Distance from spindle nose to table: approx. 120-690mm Tool holder: SK40 Max. spindle speed: 10000rpm Tool magazine: 24 positions Max. tool diameter: approx. 80mm Max. tool length: approx. 300mm Max. tool weight: approx. 7kg Rapid traverse X/Y: 24m/min Rapid traverse Z: 20m/min Control: Heidenhain TNC 620 Space requirements X/Y/Z: approx. 2700mm/2550mm/2770mm Machine weight: 5100kg Accessories/options: Dcodpfx Aqoz Rvixovjp - 4.axis rotary table - Blum measuring system ( touch probe is missing ) - documentations - Swarf conveyor - Through spindle coolant - Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,000 h, travel distance X-axis: 1,140 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, controller manufacturer: MITSUBISHI, controller model: M720 SSS, table load: 850 kg, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Additional equipment • Air blast through spindle • Rotary table with counter-support and hydraulic lock – 360° rotation • Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes • Coolant through spindle, 20 bar + low-pressure cooling system • Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe • Chip flushing system • Chain-type chip conveyor • Telescopic covers for X, Y, Z axes • Full machine enclosure with safety door lock • Central lubrication system with oil cooler Machine Benefits Qualitative Machine Benefits • Condition: very good, low operating hours • Ready for tests Dcedpfxez Ea Sxo Aqvop Technical Machine Benefits • B-axis (tilting head): –120° to +120° • C-axis (rotary table): 360° continuous rotation • 24-position drum-type tool magazine • Table size: 1300 × 610 mm Extra Information Additional equipment Work area lighting Signal tower Air and coolant guns MPG handwheel Electrical cabinet cooling with air conditioner Temperature control system for spindle and ball screws Coolant oil separator Maintenance tool set

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis VICTOR TAICHUNG Vcenter-102E was manufactured in 2019. It features impressive axis travels of 1020 mm in X, 600 mm in Y, and 560 mm in Z, along with a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the VICTOR TAICHUNG Vcenter-102E vertical machining centre we have for sale. Contact us for further details. Dedpfx Asz E Ilgoqvocp Operating hours: only approx. 290 hours

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, total height: 2,692 mm, total width: 2,794 mm, overall weight: 5,670 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 224,000 W, number of slots in tool magazine: 24, tool weight: 5,400 g, product length (max.): 2,235 mm, number of axes: 3, This 4-axis HAAS VF-3SS was manufactured in 2017. It features an X-axis travel of 1016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine includes a table size of 1219 x 457 mm and can support a maximum part weight of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3SS vertical machining centre we have for sale. Contact us for further details. • Table size: 1219 x 457 mm Dodpfx Aqsz E Sy Ujvscp • Max part weight on table: 794 kg • max torque 122 Nm • Tool capacity limits: max diameter (all tools) 76 mm; max diameter (adjacent position empty) 127 mm; max length 330 mm • Power supply: 3x400 V, 50 Hz

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, SIEMENS 828D control system with USB interface and LCD screen Table dimensions: 1200 x 600 mm T-slot size: 16 mm Number of T-slots: 5 T-slot distance: 100 mm Max. load capacity: 800 kg X-axis automatic travel: 1050 mm Y-axis automatic travel: 600 mm Z-axis automatic travel: 600 mm Spindle taper: SK40 DIN69871 Speed range: 10,000 rpm Tool magazine: 30-station Drive power: 11 kW Power requirement: 400V / 40 kVA / 3 x 32A Weight: approx. 7000 kg Dimensions (LxWxH): 4319 x 2300 x 3000 mm Features and accessories - SHOPMILL module in the control system - Chip conveyor - Coolant system Dcsdpfx Aqoz Ih E Eevsp - Portable handwheel - LED lighting - Spindle cooler - Manuals The machine is being sold due to company liquidation. Very good condition. Under power in our showroom.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, Deckel Maho DMC 103V Vertical Machining Center The machine is in good condition and can be inspected while powered on at any time. Djdpfx Aezw U Rcoqvecp Technical data: Year of manufacture: 2003 Control system: Heidenhain TNC 426 / 43 Travel ranges: X: 1000 mm Y: 600 mm Z: 600 mm Spindle: 10,000 rpm Tool holder: SK40 ATC with 24 positions Table: 1200 x 600 mm Weight: approx. 6,750 kg Dimensions: 410 x 242 x 275 cm Accessories and options: Coolant tank Electronic handwheel with 3D path control Cooling system with compressed air Operating mode 4 Documentation

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Manufacturer: SPINNER Type: VC 1150 Year of manufacture: 2023 Number of axes: 3 X / Y / Z: 1,150 / 620 / 600 mm Spindle speed: 14,000 rpm Control system: Siemens Measuring probe Operating hours: approx. 2,300 h Universal chip conveyor with high-pressure pump Direct measuring systems in X/Y/Z Portable handwheel HR510 FS 32 tool stations as a high-speed changer with a dual-arm gripper Dedpfxez E Axbs Aqvocp Condition: visually in very good condition

Condition: ready for operation (used), Year of construction: 2006, overall weight: 6,000 kg, spindle motor power: 11 W, Heidenhain TNC 530 control Travel: 1000 x 510 x 510 mm Table: 1200 x 450 mm Dcsds Abduvspfx Aqvsp Tool changer: 24 tools Spindle: BT40, 8000 rpm Weight: 6000 kg

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) Dcedezh Nczjpfx Aqvep +/- 90-degree head (B axis), 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 1016mm x 508mm x 508mm, table size 1168mm x 508mm, 10000rpm spindle, 20 station ATC, BT40 spindle taper, input 15kW, Hurco WINMAX 5 control, coolant, swarf auger. Dsdpfxszh Hw No Aqvecp

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 HSCI Speed : 10000 rpm Movement X/Y/Z : 1050/530/630 mm Tool holder : SK40 General: Dedpfx Asz R Icweqvjcp Tool magazine:24 stations Rapid traverse X/Y/Z:24 m/min Machine weight:7,800 kg Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK40 Fluid delivery:Blow air through the spindle + cooling lubricant through the spindle (IKZ) Work table: Work surface:1,150 x 560 mm Table load capacity (max.):700 kg Travel ranges X/Y/Z:1,050 x 530 x 630 mm Features/Accessories: Chip Management:Chip Conveyor Cooling Management:IKZ System Setup Mode:Electronic Handwheel Probe:Tool Probe (Hexagon)

Condition: excellent (used), Year of construction: 2018, operating hours: 4,883 h, CN DMG MORI SLIM line Multi Touch Control 19” (operates on Siemens) Spindle hours: 4883 hours 2770 x 2750 x H2935 mm, footprint 4850 x 6100 mm Weight: 5830 kg Spindle speed: 12000 rpm X-axis: 1100 mm, Y-axis: –560 mm, Z-axis: –510 mm Table: 1400 x 560 mm Rapid traverse: 30 m/min Dsdpfx Asz H I Nnsqvjcp Spindle power: 13/9 kW 30-position tool changer with dual arm Chip conveyor Washing gun Through-spindle coolant Chip conveyor Electronic handwheel Renishaw tool probe and workpiece probe

Condition: excellent (used), Year of construction: 2015, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (min.): 14,000 rpm, operating hours of spindle: 14,500 h, coolant supply: 20 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Machining center Deckel Maho DMC 1150V Technical data CNC control: Siemens Ergoline Travel in X-axis mm: 1150 Travel in Y-axis mm: 700 Dodpfx Aoz Ayg Teqvscp Travel in Z-axis mm: 550 Feed rates m/min: 42 Max. spindle speed rpm: 14000 Coolant supply through the spindle bar: 20 Tool holder: SK 40 Magazine: 30 Chip conveyor Tank capacity liters: 600 Measuring probe Infrared tool measurement TT140 Coolant gun Direct measuring system XYZ Operating hours: 26,600 h Spindle operating time: 11,000 h Base machine: Dimensions/Weight L/W/H mm: 3600 x 2300 x 2700 Weight kg: 5750

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Table ... 1300 x 550 mm X ... 1050 mm Y ... 530 mm Z ... 510 mm Spindle revolutions ... 10 - 12000 rpm 3 axes Taper in spindle ... ISO 40 Max. table loading ... 1200 kg Number of tools in tool changer ... 30 Dcodpfx Aqjz Nkn Tjvop Number of pallets ... 2 Machine weight ... 7700 kg