Used center lathes 500-599mm turning diameter over bed for sale (109)

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Crjdjhhm Edspfx Aqvji Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min Codpfx Aqoucgr Iovjri total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter over bed slide: 560 mm, turning diameter over top slide: 356 mm, center height: 280 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, type of input current: three-phase, three-jaw chuck diameter: 320 mm, Center distance ----- 1500 mm Center height ----- 280 mm Turning diameter ----- 560 mm Main spindle bore ----- 105 mm Bed width ----- 350 mm Spindle speed ----- 25-1600 rpm Motor ----- 7.5 kW Cjdpfega Tvljx Aqveri INCLUDED * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOC3, with 4 tool holders * Electric brake * Foot brake * Self-centering 3-jaw chuck * Independent 4-jaw chuck * Faceplate * Fixed and traveling steady rest * LED work light * Cooling system * Box with various tools

Condition: new, spindle bore: 105 mm, turning diameter: 500 mm, turning diameter over bed slide: 300 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, type of input current: three-phase, overall weight: 2,600 kg, three-jaw chuck diameter: 315 mm, New lathe with large bore. Csdevxz R Nopfx Aqveri Brand: KMS Type: CS6250C TDC: 1500 mm Turning diameter over bed: Ø 500 mm Turning diameter over slide: Ø 300 mm Turning diameter in pocket: Ø 710 mm Turning length in pocket: 240 mm Bed width: 390 mm Spindle passage: Ø 105 mm Spindle speeds: 12 (36 - 1600 rpm) Tailstock spindle diameter: 75 mm Tailstock range: 150 mm Tailstock mounting: MC5 Machine dimensions: ± 3132 x 975 x 1270 mm (L x W x H) Machine weight: ± 2600 kg Machine equipped with: - Longitudinal and cross feed. - Rapid traverse on longitudinal and cross feed. - Adjustable and movable stops for automatic longitudinal feed. - Thread cutting axis (cutting of Metric/Inch/Module/DP thread possible. - Quick-change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, passage 100 mm (Camlock). - 4-jaw chuck Ø 400, passage 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Fixed steady rest Ø 120- Ø 260 mm. - Follow steady rest Ø 20 – Ø80 mm. - Coolant device.

Condition: new, Made in Italy Machine manufactured according to DIN 8606 Maximum turning height: 260 mm Turning diameter over bed: 520 mm Turning diameter over slide: 300 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (Option 11 - 2000 rpm) Motor power: 5.5 kW (Option: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide, WxL: 650 x 230 mm Cross slide travel: 340 mm Top slide, WxL: 350 x 150 mm Top slide travel: 150 mm Tailstock spindle diameter: 85 mm Tailstock spindle travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: Cedpfx Asdvm Eusqvori - Tailstock movement with pneumatic assistance - Acceptance test report according to DIN 8605, lathe with increased accuracy - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g. Siemens/Schneider - Lubrication of guide rails via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: Chuck guard with plexiglass pane, secured with microswitches. Tool holder guard with plexiglass pane. Rear splash guard over the entire length. Lead screw and feed screw protection by means of a light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip tray on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to the latest CE standard

Condition: new, Maximum turning height: 250 mm Turning diameter over slide: 350 mm Turning diameter in the curve: 695 mm Distance between centers: 1500 mm Spindle nose: DIN 55029, cam lock, size 6 Bed width: 305 mm Cross slide travel: 272 mm Top slide travel: 155 mm Spindle bore: 80 mm Speed range, stepless: (3) 30 - 2200 rpm Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14 mm Diametral threads: (21) 8 - 44 D.P.I Module threads: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/rev Cross feeds: 0.02 - 0.50 mm/rev Motor power: 5.5 kW Dimensions L x W x H, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker's precision - Stepless speed control (3 pre-selected stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guideways - One-piece cast iron base - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed drive with a large feed range, running in a closed oil bath. - Low-maintenance central lubrication system - Removable bridge - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - Frequency inverter - Machine stand with a high splash guard and integrated lighting - Chip tray that can be pulled out to the front - 3-jaw chuck - Fixed steady rest - Traveling steady rest - Micrometer bed stop - Oil cooler Cjdpfx Aqjgt E Ilevori - Two emergency stop push buttons and a foot pedal with an electrical braking system - End-switch protected chuck guard, tool holder guard, and cover for the lead and feed screw according to European safety standards CE - Coolant system - Fixed center - Reduction sleeve for the main spindle - Operating tools in a toolbox

Condition: new, WORKING RANGE TURNING / - swing diameter (max) 520 mm - turning diameter (max) 260 mm - worpiece length max. 1500 mm MAIN SPINDLE - spindle bore diameter 78 mm - spindle revolutions (min) 20 /min - spindle revolutions (max) 2000 /min - number of gears 12 - spindle diameter 78 mm SCREW CUTTING SPINDLE - advance z-axis (min.) 0.05 mm/r - advance z-axis (max.) 0.82 mm/r - advance x-axis (min.) 0.02 mm/r - advance x-axis (max.) 0.4 mm/r - pitch of spindle 6 mm TAILSTOCK - sleeve diameter 68 mm - taper: MK 4 Cjdpfx Aqofcqtdevjri ELECTRICAL SPECIFICATIONS - total power consumption 5.5 kW DIMENSIONS / WEIGHTS - total weight approx. 1810 kg

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,160 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,810 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Maximum turning height: 260 mm Distance between centers: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029, Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Features include: Hardened and precision-ground Z-axis guide rails Turcite coatings (on the mating surface) of the tool and cross slides Manual central lubrication with one pump for the longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Cjdpfxjh Rvxhe Aqvjri Gear lever with 3 adjustable cams Machine light Fixed centering point Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,500 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,670 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 2,135 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Maximum height: 260 mm Distance between centers: 1500 mm Spindle bore: 78 mm Spindle nose according to DIN 55029, Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Equipment includes: Rapid traverse in the Z-axis Hardened and precision-ground guide rails for the Z-axis Turcite coatings (on the mating surface) of the tool and cross slides Cedpoctutmjfx Aqvsri Manual central lubrication with one pump for the longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Gear lever with 3 adjustable cams Machine light Fixed centering point Set of machine mounting plates