Used center lathes 400-499mm turning diameter over bed for sale (215)

Condition: new, turning length 850 mm turning diameter 400 mm Hjdpfoxaaxwsx Acgsfl swing diameter over bed slide 245 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 260 mm spindle taper DIN 55029 D 1-5 taper in tailstock 3 MK quill travel 120 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1255 kg range L-W-H 1900 x 1000 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Clamping disk 320 mm - Fixed steady rest - passage diameter max. 130 mm - Follow-on steady rest - passage diameter max. 100 mm - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake in accordance with CE standard - Initial filling with Shell Tellus 46 - Extendable chip tray - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip rear wall - Operating tool

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left Hsdpfx Ajzbc Dascgofl - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor Hedpfx Aozbc Dtjcgjfl - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: new, turning length 1000 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80.0 mm turning speeds 25 - 1700 U/min Hodpfoxab H Aex Acgjfl bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5.5 kW weight of the machine ca. 1675 kg. range L-W-H 2300 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - Change gears - 2 centering points - Reducing sleeve - Thread gauge - LED machine light - Chip back wall - Operating tool

Condition: good (used), Year of construction: 1979, functionality: fully functional, Lead and Feed Spindle Lathe Manufacturer: WEILER, Type: COMMODOR Hodpfxoz Ahuxe Acgsfl Year of manufacture: 1979 Technical data Manufacturer: Weiler Type: Commodor Swing over bed: 400 mm Distance between centers: 1000 mm Spindle bore: 50 mm Spindle speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment • 3-axis digital display • Drill chuck • 3-jaw chuck, manufacturer: Röhm, D200mm • Multifix holder • Additional 3-jaw chuck that is on the machine is not included in the scope of delivery! All information is subject to change without notice. A live demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1988, centre distance 1100 mm 840 mm hollow 80 mm ja connected load 18,5 kW Hjdpfx Acjzycrtjgefl digital ja multifix ja weight of the machine ca. 4 t

Condition: used, Year of construction: 1980, serial number 36884 centre distance 1000 mm 520 mm weight of the machine ca. 2 t Hfedjzmixtspfx Acgel

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 87 mm, turning diameter: 380 mm, turning length: 1,000 mm, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, travel distance X-axis: 190 mm, travel distance Z-axis: 1,090 mm, VICTOR VTURN-26 / 110 – LIVE TOOLING - Manufacturer: Victor - Model: Vturn-26 / 110 - Year: 1998 - Machine Type: CNC Turning Center with Live Tooling - Number of Axes: 3 (X / Z / C) - C-Axis: Included - Live Tooling: 8 Driven Tools - Bar Feeder: Included Hedpfx Aozvfruocgjfl - X-Axis Travel: Approx. 190 mm - Z-Axis Travel: Approx. 1,090 mm - Maximum Turning Length: Approx. 1,000–1,100 mm - Swing Over Bed: Approx. 520 mm - Maximum Turning Diameter: Approx. 380 mm - Spindle Speed: Up to 3,500 rpm - Spindle Nose: A2-8 - Bar Capacity: Approx. 75 mm - Spindle Bore: Approx. 87 mm - Spindle Motor Power: Approx. 18.5 kW - Turret: Live Tool Turret - Machine Dimensions: Approx. 4,400 × 1,700 × 1,900 mm - Machine Weight: Approx. 6,000 kg - Bar Feeder: Included

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Hfjdpsvzmtzjfx Acgol Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: reconditioned (used), Product information "Guide and lead screw lathe Kern D 20 A" Guide and lead screw lathe Kern Type / Model D 20 A Condition: Reconditioned Technical data: Distance between centers: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (12): 31.5 - 1400 rpm Motor power: 4 kW Quill stroke: 150 mm Weight: approx. 1500 kg Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: Hedpfoy H Iqwsx Acgofl - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Rotating center

Condition: reconditioned (used), Lead and feed spindle lathe Kern Type / Model: D 20 A Condition: Overhauled Technical data Center height: 215 mm Distance between centers: 600 mm Spindle bore: 50 mm Bed width: 300 mm Spindle speed (24): 31.5 - 1400 1/min Motor power: 4 kW Quill travel: 150 mm Weight: approx. 1500 kg Hfedpfxjy H Eckj Acgsl Dimensions (W x D x H): approx. 2180 x 1180 x 1560 mm Equipment: - Geometry protocol - 3-axis digital display - Emergency stop button - Quick-change tool holder system Multifix - Machine light - Coolant system - Follower center

Condition: new, TC 205 x 1000 Center height: 205 mm Swing over bed: 410 mm Distance between centers: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, Size 6 Cross slide travel: 220 mm Top slide travel: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Continuously variable Mechanical pre-selection stages: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feed Z: 0.05 - 1.7 mm/rev Cross feed X: 0.025 - 0.85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametral threads: (21) 8 - 44 DP Module threads: (18) 0.3 - 3.5 MP Tailstock diameter: 52 mm Tailstock quill: MK 4 Tailstock travel: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Tool machine accuracy according to DIN 8605 - Continuously variable speed control (2 pre-selection stages) Hedpfx Aeir If Dscgefl - Finely balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed gear with a large feed range, running in a closed oil bath. - Low-maintenance central lubrication - Removable bridge Scope of supply: - 3-axis digital display (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool holder with four cassettes - High splash guard and integrated LED work light - Chip tray that can be extended forward - Slip clutch - Fixed steady rest with ball bearing inserts - Traveling steady rest - Micrometer bed stop - Machine feet (1 set of 6 pieces) - Two emergency stop push buttons - Foot pedal with double braking system (mechanical and electrical) - End-switch protected chuck guard, tool holder guard and cover for the lead screw and ball screw in accordance with European safety standards CE - Coolant system - 2 fixed centering points - Reduction sleeve for main spindle - Operating tool - Operating tool in a tool box - Operating manual with parts list

Condition: new, TC 180 x 1000 V Center distance: 1000 mm Center height: 178 mm Swing over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2500 RPM Mechanical feed steps: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Inch thread: (32) 4 - 56 TPI Module thread: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Tailstock spindle diameter: Ø 40 mm Tailstock spindle taper: MK 3 Tailstock quill travel: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Dimensions, approx.: 1880 x 880 x 1390 mm Features: - Acceptance test report according to DIN - Precise, hardened, and ground guides - Robust headstock with oil circulation lubrication, precision-bearing spindle, gears hardened and ground for lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking system (V models) - Torsion-resistant machine beds made of MEEHANITE quality cast iron, stress-relieved by annealing and with multiple ribs for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gear - Pulse button for main spindle Hedpfx Ajir Imyscgefl - CE / IEC as well as German documentation and German service Standard equipment (standard accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way tool post - Foot pedal with mechanical braking system - Coolant system - Chuck guard and spindle cover in accordance with European CE safety standards - 1 Fixed center for main spindle - 1 Fixed center MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Quick-change tool holder system Multifix also available as geared variants

Condition: used, Year of manufacture: 1980s/90s Hsdpfx Acoydk Hhogofl Technical data: Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders - Bed stop - Chip tray

Condition: used, Year of construction: 1992, turning diameter over bed 320 mm turning diameter over slide rest 180 mm turning length 1000 mm turning diameter in the gap 460 mm turning speeds 70 -2000 U/min centre height 160 mm spindle bore 27 mm total power requirement 2,0 KW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,8 x 1,2 x 1,6 m Centre lathe (lead-screw and feed-rod lathe) - 160 mm 3-jaw chuck - Faceplate - Spare jaws - Quick-change tool post (base unit) - 3 tool holders Hfedszyvaqjpfx Acgol - 2 steadies - Live centre - Chip tray

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Harrison Alpha 460plus Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Gap width from faceplate (approx) 216mm Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Hodjnxkcqopfx Acgjfl Tailstock diameter 95mm Tailstock taper No. 6 MT Approximate weight 2760kg Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Machine equipped with 3 jaw chuck Quick change toolpost and 4 off toolholders Harrison/Fanuc GE operator panel and screen Stationary steady Guarding Lighting Coolant system

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 5V0168, MACHINE SPECIFICATION Height of centres 280mm Swing over bed 554mm Swing over cross slide 370mm Swing in gap 830mm Width in front of faceplate 216mm Bed length between centres 2000mm Spindle speeds: number 3 Spindle speeds: ranges 18-200,55-605, 160-1800rpm Spindle nose mounting Camlock D1-11 Spindle bore 104mm Taper in nose bush No. 5MT Width over bedways 400mm Travel of cross slide 300mm Travel of top slide 175mm Travel of tailstock barrel 178mm Tailstock in tailstock barrel No. 6MT Approx. Weight 3650Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chuck Quick change toolpost and 4-off toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard Hfjdpfjzna Twox Acgel

Condition: good (used), Year of construction: 1966, functionality: fully functional, Digital measuring device Centre height: 150 mm Swing over bed: 300 mm Turning diameter in the gap with face plate: 405 mm Distance between centres: 1000 mm 3-jaw chuck, with chip guard Multiflex toolholder Spindle speeds: 33 - 2000 rpm Chip tray Hfodex Eah Aspfx Acgol Tailstock quill diameter: 45 mm, quill travel: 100 mm Taper: MK 3 Machine dimensions: 2500 x 800 mm Weight: 1180 kg Operating manual

Condition: good (used), Year of construction: 1976, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 65 mm, turning diameter: 480 mm, turning length: 1,000 mm, total length: 3,400 mm, total width: 1,000 mm, total height: 1,500 mm, spindle speed (max.): 2,240 rpm, type of input current: AC, overall weight: 3,500 kg, For sale is an L+Z lathe manufactured by VDF Boehringer. The machine is in good condition and can be inspected and tested upon request. Manufacturer: VDF Boehringer Göppingen Type: D 480 Year of manufacture: 1976 Swinging diameter over bed: 480 mm Swinging diameter over cross slide: 280 mm Turning length: 1000 mm Power feed Spindle bore: 65 mm Maximum speed: 2240 rpm Bed width: 310 mm Dimensions (L x W x H): 3400 x 1000 x 1500 mm Weight: approx. 3 tons Includes various Multifix tool holders and accessories. Hjdpfx Ajzu I A Tscgsfl Free loading onto a truck.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 1,000 mm, quill diameter: 75 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 9 rpm, quill mount: MK 5, Equipment: rotational speed infinitely variable, incl. RÖHM lathe chuck incl. 3-axis position display incl. quick-change tool holder 'Set', Multifix system for further information, see data sheet ELMAG warranty: 3 years (with online registration after purchase) Hjdpfxsy Izauo Acgsfl NOT THE RIGHT MACHINE? We are official ELMAG partners and can offer you the entire range of ELMAG products! Request a quote!

Condition: used, functionality: fully functional, spindle bore: 100 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, type of input current: three-phase, Manufacturer: Gildemeister Heidenreich&Harbeck Machine type: Centre lathe Condition: functional Centre distance: 2100 mm Swinging diameter over bed: 340 mm Swinging diameter over carriage: 200 mm Spindle bore: 100 mm Spindle speed: 9 – 1800 rpm Motor power: 15 kW Mains voltage: 380 V Carriage travel: 300 mm Compound slide travel: 140 mm Tailstock travel: ~ 2000 mm Hodpfx Ajzxpppecgsfl Tailstock spindle diameter: 80 mm Tailstock spindle stroke: 150 mm Tailstock mount: MK5 Bed width: 320 mm / 410 mm Digital measuring system: X-axis, Z-axis

Condition: repair required (used), Year of construction: 1969, functionality: not functional, machine/vehicle number: 41526, spindle bore: 95 mm, turning length: 8,000 mm, spindle speed (max.): 710 rpm, spindle speed (min.): 14 rpm, type of input current: three-phase, Manufacturer: Meuser Machine type: Lead screw/feed spindle lathe Condition: Damage to the lamellar clutch Distance between centers: 8000 mm Swinging diameter over bed: 470 mm Swinging diameter over cross slide: 360 mm Spindle bore: 95 mm Spindle speed: 14 - 710 rpm Motor power: 15 kW Hodpfxjzxpf Rj Acgofl Supply voltage: 380 V Cross slide travel: 630 mm Top slide travel: 190 mm Tailstock travel: ~8000 mm Tailstock spindle diameter: - Tailstock spindle stroke: 230 mm Tailstock mounting: MK6 Bed width: 390 mm / 530 mm Digital measuring system: X-axis, Z0-axis

Condition: used, greates pass round over bed 480 mm swing diameter over bed slide 300 mm turning length 1500 mm Hfsdpfx Acotqqx Aogsl centre height 240 mm centre distance 1500 mm spindle bore 42 mm spindle turning speed range 14 - 1400 U/min total power requirement 4 kW weight of the machine ca. 2,4 t dimensions of machine L x W x H 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center

Condition: ready for operation (used), Year of construction: 1961, Maximum height: 200 mm Distance between centers: 1000 mm Hfodpfx Ajzvw Tkocgel Spindle bore: 52 mm Spindle mounting, short taper size: 6 Taper of the tailstock quill: MK 4 24 spindle speeds: 21 - 1300 rpm Feed rates: 0.03 - 0.88 mm Module threads: 0.5 - 15 module Inch threads: 2 - 48 threads/inch Drive motor: 380 V, approx. 10 kW Space requirement: 2600 x 1000 x 1400 mm Weight, approx.: 2.5 t

Condition: used, functionality: fully functional, total length: 225 mm, total width: 100 mm, total height: 130 mm, Fully functional conventional lathe with a large number of accessories! Hjdpfx Acszzdqajgofl