Condition: used, Year of construction: 2013, Working center with automatic robot for panel loading and unloading management Biesse XP600 Numerical Control with Biesse Works ADVANCE graphic interface software - machine version and version office - WRT technology (Widows real time) the machine control logic is processed directly on the PC and not on a dedicated special device Working field in X axis 6200 mm Working range in Y axis mm 1552 Working field in Z axis 180 mm Dslqjkvrxusw S Nxecg Z axis travel mm 235 N ° 2 work fields in X axis Bar worktop \ console No. 10 EPS electronically adjustable bars for suction cup support N° 8 pneumatic bakelite bars for lifting the panel - loading / unloading aid N° 4 EPS electronically adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical electrospindle, with automatic tool change, motor KW 12 - 12000 RPM - flange for aggregates - preparation for C-Axis Vector Automatic tool change system with 12 positions - positioned on the machine head BH35L boring head with spindles arranged as follows: - N° 14 verticals in X axis - N° 10 vertical in Y axis - N° 6 horizontal in X axis - N° 4 horizontal in Y axis Independent blade for making grooves in the X axis - diam. 120 mm Front protection and safety system with carpets Perimeter protection grids Automatic lubrication system Machine control cooling and cleaning system with conditioner Vacuum pump mc / h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 translating motorized roller conveyor * 1 motorized panel stack unloading roller conveyor Technical features: * Type : KR210-2 * Number of axles : 6 * Admissible nominal load : Kg 210 * Machine weight : Kg 1267 * Sound level: 75dB * Installed power: 25.8 kW * Panel dimensions - Min\max length: mm 300\3000 * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: Kg 90

Condition: new, Brief description: 6 sides Machining: left, right, front, rear, top, bottom Aggregates: Upper drilling head with the following equipment: - 12 vertical drilling spindles (8 in X-direction / 4 in Y-direction) - 2 horizontal double drilling spindles (2+2 in X-direction) - 2 horizontal drilling spindles (in Y-direction) Grooving saw blade d= 120 mm, in X-direction (can be used from 50 - 1,000 mm in Y-direction) Y-direction) Milling unit on top with: 5.5 kW motor and 5-position tool changer Tool holder: SK 30 Bottom drilling head with: - 9 vertical drilling spindles (3 x 3 in X-Y direction) Bottom milling unit with: 3.5 kW motor Linear guides with double gripper for transporting of the panel materials in X-direction. Automatic measurement of the workpiece in X, Y and Z. Lateral and upper workpiece pressure device. Air cushion table in infeed and outfeed incl. fan Intelligent work table with horizontal and vertical movement. movement. Masterwork software, can be used with various formats such as XML, mpr, etc. PC control and barcode scanner. Interface for ERP/MES system, import DXF, MPR, XML, bbp formats Technical data: Axes: X-axis: Max. Workpiece length: unlimited Min. workpiece length: 70mm* Traversing speed: 0-25 m/min. Y-axis: Max. Workpiece width: 1,000mm Min. workpiece width: 35mm* Traversing speed: 0-90 m/min. * in 5-sided machining Z-axis: Max. Workpiece thickness: 60mm Min. workpiece thickness: 9mm Traversing speed: 0-50 m/min. The minimum and maximum workpiece sizes are depend on the weight and also on the length to width ratio! to width! Dsletq Efteqw S Nxocg Further data: Compressed air: 6 bar Max. air consumption: 450 l/min. Machine dimensions: approx. 4,260 x 2,660* x 2,190 mm (L x W x H) * with closed door Weight: 2,800 kg Extraction nozzle: 1 x 200 mm, 1 x 100 mm Required extraction capacity: 4,200 m³/h at 30 m/sec. Lamello CLAMEX tool kit for TF 600 KT for Masterwood TF 600 KT consisting of: 2 collet chucks Collet chuck 12mm + 20mm DIA disk grooving cutter DIA end mill Tool kit for TF 600 KT Tool kit, consisting of: 2 pieces 3mm solid carbide high-performance drills (left) 5 pieces 5 mm solid carbide high-performance drills (left) 4 pieces 5 mm solid carbide high-performance drill bits (right) 3 pieces 8 mm HW longlife drills (left) 3 pieces 8 mm HW longlife drills (right) 4 pieces 10 mm HW longlife drills (left) 2 10 mm HW longlife drills (right) 2 15 mm HW longlife drills (right) 2 20 mm HW longlife drills (right) 1 piece 35 mm HW longlife drill bit (left) 1 piece 35 mm HW longlife drill bit (right) 1 HW grooving saw blade 4 mm 2 DIA milling cutters 8 mm 2 collets 8mm 2 DIA milling cutters 16mm 3 collet chucks 2 collet chucks 20mm Hook wrench ISO-30 taper Milling unit designed for door processing for Masterwood TF 600 KT complete incl: special tool changing station in the tool changer, Angular gear for mounting a lock case cutter, Macro for lock case Solid carbide lock case cutter, Z = 2, d = 16 mm

Condition: good (used), Year of construction: 1988, RANC 613 NT, machine-no.: 615, BJ: 06/88, with 2 tables, simultaneous milling on both tables, own milling machine MDF, 2x8 tools Dolqw S Nopm E Ufexscg

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 449, travel distance X-axis: 2,100 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 250 mm, feed rate X-axis: 54 m/min, feed rate Y-axis: 54 m/min, feed rate Z-axis: 54 m/min, workpiece length (max.): 6,000 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 250 mm, overall weight: 4,500 kg, number of spindles: 1, number of slots in tool magazine: 8, Equipment: documentation/manual, rotational speed infinitely variable, For sale a very efficient gantry milling plotter from the renowned Polish company Kimla, manufactured to order in 2010 and has been serving us flawlessly since then, we are its first owners. The machine is very efficient thanks to such a large processing field of 2100X6000 mm, which makes it possible to place two furniture boards of standard dimensions on the table at the same time, this allows you to work on 1 field while collecting elements and feeding the board to the 2nd field. The machine has a revolver magazine mounted on the gate, which allows for quick automatic tool change The vacuum table is divided into 2 sections, a Beckers pump is included More photos and videos by phone We will help with loading Delqevv Ugljw S Nxecg Net price FV23% negotiable

Condition: used, Year of construction: 2001, Type Record 121 Number of working axes 3+ Useful working area axis X-Y-Z 2600-1080-250 mm Table dimensions 2600 x 1080mm Spindle speed 900 - 18000 rpm Number of milling spindles: 1 Djlqw S Nsv Dtiboxscg Tool change positions: 12 Tool clamping system HSK63F Work table Matrix table The main engine is 7.5 kw Vacuum pump performance 250/300 m3/h Vacuum motor 6.5 kw The diameter of the extraction socket is 150 mm Air pressure 7 bar Voltage 380V/50HZ Transport dimensions 3700x3200x2600mm Weight 3500 kg The price is 15500 Eur

Condition: good (used), Year of construction: 2000, For Sale: AXYZ 4010 CNC Router (Year 2000) – Made in Canada, Reliable & Versatile We are offering a pre-owned AXYZ 4010 CNC Router, manufactured in Canada, from the year 2000. Known for its durability, precision, and versatility, this CNC router is ideal for various cutting, engraving, and milling applications. It has been well-maintained and remains in good working condition, making it a cost-effective choice for businesses looking to enhance their machining capabilities. Dcoljvzagueqw S Nxog Specifications & Features: Work Area: 1220mm x 2540mm (48" x 100") Table: vacuum table Spindle Type: 2x High-speed router spindle Control System: AXYZ proprietary CNC control Drive System: Stepper motor-driven for precision movement Material Compatibility: Suitable for cutting wood, plastics, aluminum, composite materials, and more Software Compatibility: Works with standard CAD/CAM software Manufactured In: Canada Condition: Used, in good working order Key Benefits: Canadian Quality: Built to high manufacturing standards for reliability and longevity. Precision & Efficiency: Capable of intricate cuts and engravings with high accuracy. Versatile Applications: Ideal for signage, woodworking, prototyping, and light metalwork. Cost-Effective Investment: A budget-friendly alternative to purchasing a new CNC router. This AXYZ 4010 CNC Router is an excellent addition for workshops, sign-making businesses, and fabrication shops seeking a dependable machine at an affordable price.

Condition: used, Year of construction: 2008, PC based Numerical Control with XILOG PLUS software Mobile pine cone with command functions Working range on the X axis is 4400 mm Dcelopvai Djqw S Nxog Working range in Y axis 1360 mm Working range in Z axis mm. 180 Z axis travel 200 mm N° 2 work camps in X No. 8 manually adjustable panel support bars with positioning LEDs N° 3 suction cups for holding the panel for each bar N° 4 pneumatic Bakelite bars for lifting the panel (helping with loading and unloading) N° 1 Vertical electrospindle with Vector axis with automatic tool change, HSK 63 connection cones Automatic tool changer with 12 positions on the operating head Drilling head composed as follows: No. 8 vertical X-axis spindles N° 5 Y-axis vertical spindles N° 4 horizontal spindles in X axis N° 2 horizontal spindles in Y axis Safety system with bumper system on the operating head N° 1 vacuum pump 100 m3\h Automatic lubrication

Condition: good (used), Year of construction: 1991, RANC 316 CBW, machine-no.: 906, with 2 tables and 2 waste conveyors, two split tables, with tool changer 16 pieces, one angular gear 2-fold, aggregates travel approx. 1500-1600 mm Dcjlqwspn Twuj S Nxjg

Condition: used, Year of construction: 2022, NEW MACHINE OF OWN PRODUCTION - NATIONAL INDUSTRY PLAN 4.0 MACHINE COMPONABLE ON REQUEST ACCORDING TO YOUR PRODUCTION NEEDS Numerical control machining center for automatic processing of standard (45 °) or reversible (90 °) frames Numerical control with programming on industrial PC 15 ”Touch screen - Windows 10 environment and complete NP-WOOD Software of all the parametric macros for the most common processes (straight cuts, 45 ° cuts, counter plates, hinges concealed, pivot hinges etc ...) Dolqw Seu Hbhue Nxjcg The machine is completed by the relative loading and unloading benches. The loading bench is complete with motorized belts, for the automatic feeding of the machine. A special capture and locking unit, equipped with 4 pneumatic clamps, slides along the longitudinal axis (X) and firmly captures the first piece arriving from the loader desk, aligns it and then accompanies it through all work groups, without ever unlocking it, until the program is completed and then up to the unloading bench. The profile is aligned with the stop upwards (valuable side) and towards the stop side. The finished pieces, at the end of the cycle, are unloaded on a series of idle rollers and accumulate in descent. Groups present on the machine: Base + CN vice carriage (X axis) · Loading bench with motorized belts and retractable rollers for the alignment of the piece in the locking position . Blocking and handling unit of the piece by means of n. 4 pneumatic clamps (pliers) with automatic positioning according to the size of the workpiece. · Cutting unit + 45 ° kw 5.5 right side · Cutting unit -45 ° kw 5.5 left side · Cutting unit 90 ° kw 5.5 for straight cut · Group of holes + 45 ° with n. 3 spindles with 32 mm center distance for right-hand drilling · Hole group -45 ° with n. 3 spindles with 32 mm center distance for left-hand drilling · 90 ° vertical hole group (reversible frames) with n. 3 spindles with 32 mm center distance for cross-beam drilling REVERSIBLE · Group of holes horizontal / horizontal (reversible uprights) with n. 3 spindles with 32 mm center distance for drilling on the UPRIGHTS . Automatic anubating unit with loader . Automatic anubating unit with vibrating magazine 2-axis NC milling unit (Y-Z) kw 3.8 2-axis NC milling unit (Y-Z) kw 3.8 · Unloading bench with idle rollers Optional for the anuba group, the vibration warehouse All electrospindles are managed by Inverters Advantages of the work system: * Maximum precision, due to the movement of the panel by means of pneumatic clamps up to the moment of completion of the production process * Great sturdiness of all work groups which are mounted on fixed bearing structures. This guarantees quality during processing thanks to the absence of vibrations. * The cutting groups act with electric transversal movement, while the milling group is equipped with axes controlled by vertical (Z) and transverse (Y) NC. WORKING DIMENSIONS * Max profile width on bench 2300 mm * max profile width 230 mm * min profile width 60 mm AVERAGE PRODUCTIVITY considering the complete frame with anuba processing - 180 complete frames per shift of about 7 hours

Condition: good (used), Year of construction: 1990, RANC 335 AW, machine number 859, year 1990, fixed table, approx. 1550 x 3650 mm, 16 tool changer, with 4-fold angle drilling or milling tool Dcelqwepn Tq Do S Nxeg

Condition: used, Homatic PC 85 Power Control Numerical Control with WoodWop Software Working range in X axis mm 6000 Working field in Y axis mm 1650 - in case of milling up to mm 1750 N° 10 adjustable panel support bars for positioning the suction cups Loading and unloading aid system via 8 pneumatic bars positioned on each work bar Schmalz type suction cups adjustable for each bar with vacuum seal for fixing the panel during machining Positioning of the suction cups by means of a laser system assembled on the main head N° 1 vertical electrospindle with C Vektor axis with automatic tool change, cones type HSK F63, KW 11 Automatic tool change in 18 positions on the back of the machine Boring head with 27 spindles (4 kW) arranged as follows: N° 11 vertical in X axis N° 6 vertical in Y axis Dcelel Ikyujqw S Nxsg N° 6 horizontal in X Independent edge banding unit with 360° rotation on second Y axis with glue pot and pre-melter for granular EVA glue Applicable edges in rolls - PVC / ABS 0.4 - 3 mm Maximum working height in edging mm 60 Maximum applicable edge height mm 65 Internal radius min mm 30 (depending on the type of edge) External radius depends on the type of material used Rubberized pressure roller + rubberized pressure roller Lamp for panel preheating Edge trimmer N° 1 aggregate blade, diameter mm 200 (max) No. 1 combined trimmer - edge scraper unit Edge holder magazine Front protection and safety system with carpets Perimeter protection grilles Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning the machine control Automatic lubrication system Vacuum pump

Condition: good (used), Year of construction: 1986, RANC 547 P, machine no.: 476, table fixed, table width 2200 mm, table length 4950 mm, without tool changer, angle drilling gear, 6 direct milling drives, very powerful motors Dcelqw Sopn Tt Re Nxeg

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction Delqeugpwnjw S Nxscg No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter Dcelqel Ikzgow S Nxeg * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: used, XNC Numerical Control Working field in X axis mm 3400 Working range in Y axis mm 1300 Working stroke in Z axis mm 155 N ° 2 work fields Worktop with bars No. 8 manually adjustable bars for the suction cup support with work quota visualization display N ° 8 pneumatic bakelite bars for lifting the panel N ° 3 manually adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical 3-axis electrospindle, with automatic tool change, ISO 30 type cones, flange for use of aggregates Automatic tool change system with 7 positions positioned on the operating head Arrangement for C axis Boring head with 28 spindles arranged as follows: - N° 12 verticals in X axis - N° 16 vertical in Y axis - N° 8 horizontal in X axis - N° 4 horizontal in Y axis Dolqw Ssuqrbfs Nxocg Independent blade for making grooves Front protection and safety system with carpets Perimeter protection grids Motorized belt for chip evacuation Vacuum pump Installed power kW 20

Condition: used, Year of construction: 2012, XP600 Numerical Control with Biesse Works Advanced Software - Biesse Cabinet - Biesse Folding - Biesse Nest - Biesse Bh 660 Working field in X axis 3875 mm Working field in Y axis 1875 mm Working stroke in Z axis 385 mm Full nesting worktable Blower for cleaning the work surface Automatic loading system with side lifting table Labeling Automatic printing and application system of adhesive labels N ° 1 3-axis vertical electrospindle, with automatic tool change, liquid cooling, Iso 30 type cones Blade group Automatic tool change system with 21 positions - positioned on the rear of the machine Drilling head with 35 spindles arranged as follows: - N ° 17 vertical in X axis - N ° 12 vertical in Y axis - N ° 4 horizontal in X axis - N ° 2 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning the machine control Djlepp Tiloqw S Nxecg N ° 2 vacuum pumps

Condition: used, XP600 Numerical Control with BIESSE WORKS Software Working dimensions in X axis 3865 mm Working dimensions in Y axis 1975 mm Working dimensions in Z axis 350 mm Nesting worktable Barcode lable printing Automatic unloading system by table with motorized belt N ° 1 vertical electrospindle, with automatic tool change, liquid cooling system Automatic tool changer system with 21 positions with chain on the rear of the machine Boring head with 19 vertical and horizontal spindles arranged as follows: - N ° 6 vertical in X axis - N ° 7 vertical in Y axis - N ° 4 horizontal in X axis - N ° 2 horizontal in Y axis N ° 1 integrated 120 mm blade in X axis for the execution of grooves Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning the machine control Vacuum pump Machine weight 5100 kg Djlqwspwvtco S Nxocg Installed power KW 32.7

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function Dcelqw S Noixxwmsxjg recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software - 3D CAD-CAM program to design, simulate, and manage processes of machining of Biesse machining centers and drilling machines BNest Software - Software module dedicated to processing in Nesting mode that allows you to create projects containing the list of articles with the quantities to be produced and the list of plates to be used with the aim of minimize the material used and processing times Working field in X axis mm 4300 Dcolqw S Net Ul Dnjxjg Working range in Y axis mm 2200 N ° 2 work fields Nesting work plan Automatic loading system with side lift table Panel detachment system with 2 suction cups N° 1 vertical 3-axis electrospindle, Kw 13.2, with automatic tool change, Hsk cone type Automatic tool change system with 16 positions - positioned on the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - N ° 5 vertical in X axis - N° 5 verticals in Y axis Automatic unloading system with motorized belt Worktop cleaning system Printing and application system of adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter grids Safety system with bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control N° 2 vacuum pumps 250 m3/h Installed power Kw 31

Condition: used, Year of construction: 2012, Numerical Control XILOG PLUS Working field in X axis 3050 mm Working field in Y axis 1050 mm Working stroke in Z axis 120 mm N ° 2 work fields Worktop with bars N ° 6 adjustable bars for the suction cups support N ° 2 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing N ° 1 vertical electrospindle, with automatic tool change, HSK connection Automatic tool change system with 10 positions positioned on the rear of the machine Drilling head with spindles arranged as follows: - N ° 6 vertical in X axis Dslqw Sjl Ikv Rs Nxjcg - N ° 4 vertical in Y axis - N ° 2 horizontal in X axis - N ° 2 horizontal in Y axis - N ° 1 blade group integrated in the X axis Bumper protection and safety system Automatic lubrication system Air conditioning system for cooling and cleaning the machine control 110 m3 / h vacuum pump

Condition: used, Year of construction: 2012, Numerical control Power Control with WoodWop Software Working range X 3000 Working range Y 850 Working range Z 60 N° 1 vertical electrospindle 3 axes Djlqw S Neikrv Noxjcg N° 1 blade integrated in the drilling head N° 5 independent spindles for vertical drilling in the "X" direction N° 3 independent spindles for vertical drilling in the "Y" direction N° 4 spindles for horizontal drilling in the "X" direction N° 2 spindles for horizontal drilling in the "Y" direction

Condition: used, Year of construction: 2016, Numerical Control with Biesse Works Software Barcode reader device Working field in X axis mm 3200 Delqel Ikxlow S Nxjcg Working range in Y axis mm 900 Working field in Z axis mm 80 Loading device automatically through n. 2 panel support clamps Automatic unloading device with panel return to the operator via motorized roller conveyors N° 2 vertical 3-axis electrospindle, ISO 30 tapers Automatic tool change at n. 5 positions Boring head with 21 spindles arranged as follows: - N° 7 verticals in X axis - N° 6 vertical in Y axis - N° 6 horizontal in X axis - N° 2 horizontal in Y axis Integrated blade for making grooves Independent unit for automatic plug insertion Front carpet protection and safety system Perimeter protection grilles

Condition: used, The COVERTEK machining center is suitable for processing solid and glued wood beams. They are used for the construction of frames and roof structures. * Portal with mobile positioning trolleys; * Machining of 6 sides without rotation of the piece; * Dual 5-axis working unit with 12-position HSK-E63 tool holder; Dcelqjtz H Egew S Nxog * N° 2 spindles of 17 kW each; * Data imported from CAD/CAM programs Technical specifications * Workpiece width: min. 100 mm - max. 600mm; * Workpiece thickness: min. 70 mm - max. 300mm; * Workpiece length: max. 13000mm; * Blade diameter: 640 mm; * Feed speed: max. 80 m/min.; * Software type: TPA ALBATROS EDICAD; * Automatic centralized lubrication; * Liquid cooling of the spindle; * Certification CE; * Total connection: 70 kW TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE IN THE WAREHOUSE

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software Working range in X axis 3600 mm Working range in Y axis 1800 mm N ° 2 work fields Delqw S Njqvt D Rsxecg Nesting worktable Automatic loading system with side lifting table Label printing system with automatic application on the loading table Panel detachment system with suction cups N° 1 3-axis vertical electrospindle, 13.2 kW, with automatic tool change, ISO 30 cone type Automatic tool change system with 16 positions - positioned on the back of the machine Automatic tool change system with 8 positions - on the machine BH 10 drilling head with 10 spindles arranged as follows: - N° 15 verticals on the X axis - N° 17 verticals on the Y axis Automatic unloading system with motorized belt Worktop cleaning system Protection and safety system with perimeter grilles Security system with Bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control 250 m3/h vacuum pumps

Condition: used, Xp 600 Numerical Control with Biesse Works Software Working range in X axis 3000 mm Working field in Y axis 1000 mm Dcjlopp Thnoqw S Nxeg Working field in Z axis 60 mm Automatic loading system with motorized belt transfer N° 2 Pliers for blocking and transporting the panel N° 1+1 vertical electrospindle 3 axes (lower + upper) N° 1+1 independent blade (lower + upper) N° 29 + 29 independent spindles for vertical drilling in "X and Y" direction (upper + lower) N° 10 + 10 independent spindles for horizontal drilling in "X and Y" direction (upper + lower) Automatic unloading system with motorized belt transfer