Condition: good (used), Year of construction: 2014, An IMA feeding system is for sale. Machine is available immediately. Year 2014 Cjb E Hoqwn E Hjv Edjrb

Condition: good (used), OMLAT Homag main spindle 12 KW 2-056-09-9670 Motor spindle with C-axis and RENISHAW measuring probe Please contact us if you only need the spindle and not the additional units. We also have a spindle in stock that can be offered without C-axis and measuring probe. Technical specifications: Tool holder: HSK F63, taper diameter 38 mm, similar to DIN 69893 Tool retraction: Automatic with a retraction force of 11,000 N Maximum tool weight: 6 kg Direction of rotation: Right/left rotation, programmable Speed range: Infinitely variable 1,500 - 18,000 rpm, programmable Drive: Frequency-controlled three-phase motor Drive power: 12 kW in S-1 mode Spindle lubrication: One-time factory grease lubrication Spindle cooling: Water cooling Constant power: From 12,000 to 18,000 rpm Serial number: 006186 Homag part number: 2-05609-9670 Renishaw MP 11 probe The Renishaw MP 11 touch probe is an indispensable addition to your CNC machine. It enables high-precision measurements and ensures that your machining processes always run accurately and reliably. NC-controlled C-axis (W-axis) Crsb E Heudmbrsv Edob The NC-controlled C-axis (W-axis) considerably expands your machining options. This axis enables a 360° rotating movement and is perfectly adapted for use in Homag/Weeke machines.

Year of construction: 2002, Condition: ready for operation (used), Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible. Ceb E Hvsn Tpm He Edorb

Condition: used, Year of construction: 1991, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 40 mm, overall weight: 4,000 kg, Taper: PS25 CNC control Tria 6000 Crobsua Arfe E Hv Edsb Motor power 5.5 kW There are 4 pieces available

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. Ceb E Hov D A Imov Edsrb The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. If you have any additional questions, we will be happy to answer them.

Year of construction: 1994, Condition: used, - More information: on request Csb E Hv Esnzh Uxedjrb

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: BR07440, Vektor 25-18 Crebevxqggs E Hv Edob

Condition: reconditioned (used), Functionality: fully functional, IMA Adapter Unit with Interchangeable Flush Trimming Head and Flat Scraper Blade The IMA adapter unit is a refurbished interchangeable unit designed for flush trimming operations and equipped with a flat scraper blade. Featuring the article number 10 237 069 and an HSK 63 F clamping system, this unit is ideal for precise and secure machining tasks. The unit’s rotation is synchronized with the drive rotation, and it includes a 57 mm opening. Specifically designed for use with IMA machines, it supports tools with chamfer milling cutters. Included in the package is a flat scraper blade. The bolt dimensions are 16/18.1 mm. The unit can reach a maximum speed of 9000 revolutions per minute and has a maximum probing depth of 1.5 mm. Following a comprehensive refurbishment, which includes inspection, replacement of bearings, and new pneumatic hoses, the unit offers maximum safety, precision, and a nearly new condition. Used adapter units are taken from operational systems and are fully functional. Any age-related wear or significant precision limitations are clearly noted. Technical Description • Product: IMA Adapter Unit with Interchangeable Flush Trimming Head and Flat Scraper Blade • Article Number: 10 237 069 Csb E Hvoudl Ido Edjrb • Clamping System: HSK 63 F • Condition: Refurbished • Rotation: Synchronized with drive rotation • Opening: 57 mm • Support Bolt: For IMA machines • Tools: Compatible with chamfer milling cutters • Flat Scraper Blade: Included • Bolt Dimensions: 16/18.1 mm • Maximum Speed: 9000 RPM • Maximum Probing Depth: 1.5 mm • Special Features: • Inspected and fully re-bearings for maximum safety and precision • Pneumatic hoses replaced • Nearly new condition Note: Used adapter units are fully functional, extracted from operational systems. Explicit notice is provided for excessive wear or significant precision reductions due to aging.

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Cjb E Hv Eeqvnl Tjdorb

Condition: new, Type 1325 Useful working area axis X-Y-Z 1300-2500-200 mm Spindle, air-cooled, 6kw, 18000 rpm. Engine Hybrid servo Drive system LAAK Work table vacuum plate Vacuum pump 7.5kw Maximum speed 25,000 mm/min (x y) 10,000 mm/min ( Z ) Working speed 10-15M/MIN Cob E Hsq Tn I Nev Edorb Power 380V/50HZ Code G Transport dimensions 3200x2100x1800mm Weight 1600 kg Price 9600 Eur (EXW Jonava, Lithuania)

Condition: repair required (used), - Power: 5,5/7,5kW - taken from IMA Quadroform Ceb E Hvsia N Anj Edsrb

Year of construction: 2014, Condition: excellent (used), IMA moving gantry machine in true GANTRY design Machining area: - Length in X-direction with all aggregates (mm): 6300 - width in Y-direction with all aggregates (mm): 1600 - Height in Z-direction with all aggregates (mm): 225 maximum clamping height including clamping device - the max. workpiece thickness depends on equipment/application - length in X-direction with vertically positioned main spindle and tool diameter 20 mm: 6300 mm - Width in Y-direction with vertically positioned main spindle and tool diameter 20 mm: 2000 mm - Width in Y-direction with edging (mm): 1600 - Length in X direction single station machining without edging (mm): 2 x 3050 - Length in X-direction free space centered (mm): 200 Crsb Esimwihs Hv Edjb - Length in X-direction single station machining with gluing (mm): 2 x 2800 - Length in X-direction free space centered (mm): 700 - Length in X-direction alternating field machining (mm): 2 x 2425 - Length in X-direction free space centered (mm): 1450 - Weight of IMA moving gantry machine (kg): approx. 10,500 - Work table height (mm): approx. 950 - IMA control system: ICOS CNC - Graphical user interface: IMAWOP in machine license version - Vacuum pump - capacity (m³): 100 - Separate coolant tank Automatic set-up table BIMA Gx50, y=1600 mm with suction plates on linear guides Additional support arm for automatic set-up table BIMA y=1600 mm with a front stop and automatically lowerable support rail Table design for 4 places offset in X for table with 8 support arms Chip ejection conveyor Video camera: installed in the suction hood next to the main spindle, for observation of the machining process on a separate monitor unit including video server 1 main spindle 18 kW, vector-controlled - suitable for milling, drilling, sawing and grinding 1 automatic tool/adapter changing magazine, mounted on the rear side of the support (arrangement on the support moving in X-direction) 1 automatic tool/adapter changing magazine, mounted on the rear side of the support (traveling along the support in the Y direction) 1 vertical drilling unit I21 Attachment unit horizontal drilling and milling head (cross head) with its own 360 degree C-axis and pneumatic feed stroke for attachment to mounting position 1 of the drilling head Edge feeding unit for diode lasers in stationary technology mechanically designed for: - edge thickness (mm): 0,4 - 3 - workpiece thickness (mm): 19 - 60 - inner and outer radius: depending on edge material - edge material length min. (mm): approx. 350 - dimension before edge joint (mm): approx. 220 on the straight line Automatically adjustable combi unit (AEK) Self-feeding flat scraper 1 adapter unit profile scraper with flat scraper

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0-201-08-7963, TECHNICAL DETAILS Traversing speed in X-direction: Max. 60 m/min. Traversing speed in Y-direction: Max. 60 m/min. Travel speed in Z direction: Max. 30 m/min. Workpiece length X-direction: max. 3440 mm with single loading Workpiece length Y-direction: max. 3710 mm for milling with tool diameter 25 mm Workpiece thickness: max. 300 mm incl. clamping device Z-axis for main spindle travel: 800 mm & second Z-axis for drilling head Vacuum pumps: 4 pcs. Crsb E Hett R E Nov Edjb Clamping table grid Raster groove exit tables: 2 pcs. Working height of grid table: 850 mm Grid dimension: 30 mm Groove width: 7 mm Groove depth: 7 mm Distance between vacuum holes: 120 mm EQUIPMENT 5-axis main spindle 15 KW " DRIVE 5+" with vibration sensor Unit interface DRIVE 5+ Disk changer 18-FACH Drilling head 17 spindles horizontal + saw 0/90° Pick-up space for saw blade 350 mm Climbing conveyor Chip and offcut disposal Power Control PC 85 with PLC control Software: Windows XP operating system, WOODWOP-PAKET AV-PC Feeding portal HOMAG Profi TBA370/40/16 Turning and alignment station

Condition: good (used), Drilling gearbox HOMAG BAZ BOF 6 + 11 with spindle Item number 1-056-08-3281 HOMAG drilling gearbox 6 spindles in Y direction 11 spindles in X direction Right - left run. Unit no. 4 -00579 Drawing no.: 009M000U7287 Gear ratio 1-1.16 Drive speed 50 HZ 3000 min1 Speed of spindle 4781 min 1 Part no.: 1-56-08-3281 Cob Ejudlwxj Hv Edsrb used version We always have numerous gearboxes and spindles in stock. Just take a look in our web store.

Year of construction: 2002, Condition: ready for operation (used), Current: 50A, nominal voltage: 400V. Crob E Hv Eoinkqrsdsb

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, workpiece length (max.): 6,175 mm, workpiece width (max.): 1,550 mm, workpiece height (max.): 300 mm, spindle speed (max.): 24,000 rpm, Provision: FCA - loading equipment must be provided by the buyer - can be borrowed from Homag TECHNICAL DETAILS Workpiece lengths: max. 6,000 mm (single), max. 2,375 mm (pendulum) Workpiece lengths for workpiece Ø 25 mm: max. 6,175 mm (single), max. 2,550 mm (pendulum) Front workpiece width: max. 1,150 mm (all units) Workpiece width at the front for routing with 25 mm diameter: max. 1,220 mm Front workpiece width for gluing: max. 1,220 mm Workpiece width at the rear: max. 1,400 mm (all units) Workpiece width at the rear for routing with 25 mm diameter: max. 1,550 mm Rear workpiece width for gluing: max. 1,475 mm Rear workpiece width with standard flush trimming and gluing: max. 1,500 mm Workpiece thickness: max. 300 mm including clamping device (router) Workpiece thickness with standard clamp: max. 60 mm Workpiece thickness: min. 12 mm (chamfer milling) Workpiece thickness: min. 16 mm (radius milling or min. 2 x radius + 10 mm) Spindle and tool changer Main spindle: 15 kW, HSK F63 Spindle speed: 24,000 rpm C-axis: with unit interface Plate changer: 18-position, D = 130 mm Cjbeu Sz Nye E Hv Edsrb Tool weight: max. 6 kg Tool weight incl. holder for units: max. 10 kg Drilling head Spindles: 30 (V20 / H10 / S360° "MPU") Drill head motor: 2.7 kW, frequency-controlled Speed: max. 7,500 1/min Vertical spindles: 20, high-speed, arranged in a U-shape (3 rows with 11, 3 and 6 spindles) Horizontal spindles: 10, arranged in pairs (4 pairs with 32 mm pitch, 1 pair 320 mm apart) Sawing and routing Grooving and cutting saw: saw blade Ø max. 200 mm Attachment milling spindle for drilling head: 6 kW (for S6 operation) FLEX-5 FLEX-5 sawing, milling and drilling unit: for tool changer C-axis extension for FLEX-5 unit: Coupling element for C-axis Gluing unit POWER EDGE gluing unit: For gluing edge material to straight workpiece edges Edge height: max. 105 mm (gluing unit BAZ222/322) Workpiece thickness during edging: max. 100 mm Further units Flush trimming unit: for tool changer Combined flush trimming and scraper unit: WD 100 mm Combination snipping and corner rounding unit: traced Lock case trimming unit: 2 spindles, D = 16/20 mm EQUIPMENT - with gluing unit - with FLEX-5 unit - Chip conveyor belt: for B200/52-72 - LED position indicator: Console 1,300-1,600 mm - LED position indicator for precise workpiece handling - Extended workpiece processing options thanks to flexible unit system - without tools The technical data and descriptions are taken from a copy of the order confirmation at the time. Data is for information only and is not binding.

Condition: excellent (used), Year of construction: 2012, operating hours: 12,247 h, Functionality: fully functional, HI! I'M SELLING THIS WEEKE VENTURE 108M / BMG111 MACHINE! Price: 31.999 EUR It was used generally on weekdays, about 4-6 hours/day since we bought it. Cjb E Hv Ejrvhktodorb The machine is absolutely working fine! PM if you are intrested. Located near Budapest, Hungary

Year of construction: 2023, Condition: new, machine/vehicle number: 28086221201 (AABM0013), MASTERWOOD CNC machining center type PROJECT TF 100 2.0 "PARTNERSHIP EDITION" - MAST0337 Technical data: Axes: X axis: Max. Workpiece length: unlimited Min. workpiece length: 250mm Traversing speed: 0-25 m/min. Y-axis: Max. Workpiece width: 1.000mm for all aggregates Min. workpiece width: 85mm Traverse speed: 0-50 m/min. Z-axis: Max. Workpiece thickness: 60mm Min. workpiece thickness: 10mm Traverse speed: 0-20 m/min. Aggregates: 16 drilling head: vertical spindles in X-direction: 5 pcs. vertical spindles in Y-direction: 5 pieces horizontal double drilling spindle in X-direction: 2+2 pieces horizontal double drilling spindle in Y-direction: 1+1 pieces distance drilling spindles: 32mm speed of drilling spindles: 4.000 rpm. motor: 1,7 kW grooving saw: in X-direction Speed of rotation: 4.000 rpm. Max. saw blade diameter: 125mm Motor: 1,7 kW (the grooving saw is integrated in the drill head) Control system: Personal computer Operating system: Windows 10 Pro - 64 bit Processor: Intel Hard disk with at least 300 GB of storage space CD-ROM drive Color monitor Video card integrated 2 Ethernet cards Program: MASTERWORK MACHINE VERSION Other data: Required air pressure: 8 bar Air consumption: max. 750 l/min Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Suction nozzle: 1 x 150mm Other equipment features: - Air tables at the working area - Roller table at infeed and outfeed - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Import of DXF files (operating instructions, switching and pneumatic diagrams are in digital form) "PARTNERSHIP EDITION" consisting of: Milling unit, incl. MASTERWORK software extension Speed: 1.000 to 18.000 rpm. Motor: 4,5 kW with ISO 30 intake Incl. integrated suction control (During drilling only the only the drill head is extracted, for milling only the milling unit is extracted) 6-fold tool changer 3 pieces ISO 30 collet chuck incl. collet chuck Tool equipment, consisting of: Crob E Hvjiukvkj Edsb HW dowel drill: 5 pieces 5mm - GL 70mm - blind hole drill. 1 piece 5mm - GL 70mm - through hole drill bit 4 pieces 8mm - GL 57,5mm - blind hole drills 2 pieces 10mm - GL 57,5mm - blind hole drills 1 piece 10mm - GL 70mm - blind hole drill bit 1 piece 8mm - GL 70mm - blind hole drill bit 1 piece 15mm - GL 70mm - blind hole drill bit 1 piece 35mm - GL 70mm - blind hole drill bit 1 HW grooving saw blade d=125mm, bore=20mm, width: 4,0mm, Z=35 WSA 1 DIA cutter, right - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1 1 DIA cutter, left - GL=103mm, NL=43mm, D=18mm, shank: 20x50mm, Z 1+1 1 VHW-WP finishing cutter, right, D=10mm Foldable roller conveyor in the infeed Foldable roller conveyor in the outfeed Automatic central lubrication plus options: Complete package for CLAMEX connectors € 3.500,00, complete door package € 3.500,00, software package PaletteCAD start + CAM connection € 3.000,00, freight, installation, instruction € 3.000,00, immediately available from location Seevetal, subject to prior sale.

Year of construction: 2013, Condition: excellent (used), Second hand machine CNC5003.is basically the standard CNC5003 Table size etc is standard CNC5003 as per brochure. Differences are that; • spindle is 8kW Omlat • ATC is 10 position revolver • Chip extraction is not same as on latest version • Currently the Vacuum pump is not included But, there are also some pluses to this machine Crsb E Hvek Ttape Edsb • Equipped with CNC aggregate bracket, to rotationally affix aggregates • 1 fixed magazine position on table for CNC aggregate Is included The machine has been operated just for small time (total of ~800h) The machine can be updated with new HSD 11kW spindle which would also include new chip extraction system The machine include: • Machine • VisualCAM software • CNC-aggregate (Atemag, 90° dual) • Assorted tool holders, HSK63F ( ~6 pcs) Spindle upgrade to HSD 11kW would cost 6k€

Condition: good (used), IMA BENZ drilling unit 10 +11 spindles with additional milling cutter and horizontal drilling head 2 x 3 spindles for IMA 310 410 610 If you are looking for a different drilling gear from Homag or IMA, please contact us or have a look at the website in our store. Cob E Hv Esudludedjrb IMA BENZ drilling unit is a versatile and powerful tool, especially for the IMA 310, 410 and 610 machines. It is a 10 + 11 spindle drilling unit with an additional milling cutter and a horizontal drilling head with 2 x 4 spindles. Here are some technical details: Unit no.: 4-08300 and 4-07753 Drawing no.: 000W00004824 and 000M11100819 Motor speed: 1max = 4800 min-¹ Spindle speed: 8100 min-¹ and 8400 min-¹ Drive power: 4 kW Gear ratio: i = 1:1.69 and 1:1.75 Milling spindle: For holding milling tools The unit is used but in a functional condition and offers high productivity thanks to the ability to drill several holes simultaneously, which significantly reduces machining time.

Year of construction: 2001, Condition: ready for operation (used), Operational hours counter: ca. 40,000h, there is little documentation, has been serviced regularly, suitable for aluminum and wood, available from June/July 2024, an on-site inspection is possible. Csb E Hvep S Sq Ie Ederb

Condition: good (used), CNC tools for sale Crebou Ura Is E Hv Edsb

Condition: new, Year of construction: 2024, Spindle speed: 4460min-¹ Min. workpiece dimension X: 300mm Min. workpiece dimension Y: 90mm Min. workpiece dimension Z: 10mm Max. Travel speed X axis: 20m/min Max. tool diameter: 35mm Max. Workpiece dimension X: 3000mm Max. Workpiece dimension Y: 900mm Max. Workpiece dimension Z: 50mm Crob E Hsl D Rw Njv Edob Grooving saw speed: 5700min-¹ Dimensions: 3704mm x 1455mm x 2209mm (L x W x H) Nominal width of external suction nozzle: 120mm Power drive motor: 2,2kW Weight: 1200kg

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 2,610 mm, travel distance Z-axis: 500 mm, number of slots in tool magazine: 32, TECHNICAL DETAILS Machine type: 6-axis plastic machining center Milling motor: 1 piece, 5-axis Sixth axis: Part plate (lathe) Control: OSAI with PC Working area: 1,300 x 2,610 mm Crjb E Hvov Ax Tvo Edsb Z-usable working height: 500 mm Vector speed: 85 m/min Table dimensions: 2,000 x 1,000 mm Tool change: 2 automatic tool changers Number of tool positions: 2 x 12 + 8 Holder: HSK F63

Condition: good (used), Electrospindle Main spindle OMLAT IMA 12 KW Crob Ejrhzlns Hv Edsb The price includes the C-axis shown. If you only require the main spindle, we will of course grant a discount. 1st tool holder: Type: HSK F63, similar to DIN 69893 Taper diameter: 38 mm 2. tool retraction: Automatically controlled Pull-in force: 11000 N 3. tool weight: Maximum weight: 6 kg 4. direction of rotation: Right/left rotation, programmable 5. speed range: Infinitely adjustable from 1500 to 22000 revolutions per minute Programmable for individual requirements 6. drive: Frequency-controlled three-phase motor 7. drive power: 12 KW in S-1 operation 8. spindle lubrication: One-time factory grease lubrication for efficient maintenance 9. spindle cooling: Water cooling to maintain optimum operating temperatures 10. constant performance: Range from 12,000 to 22,000 revolutions per minute Spindle condition: Used but tested The main spindle was removed from a running system and carefully checked. As an alternative to new spindles, which are often not available, it guarantees immediate use and optimum reliability. This used spindle offers a cost-effective solution without compromising on performance.