Year of construction: 1997, Condition: good (used), External dimensions: 4500x2400x2000 mm Fslq Egoivr Hrs Tqegb Workspace: 3000x900x80 mm Power: 15 kW

Condition: excellent (used), Year of construction: 2005, operating hours: 5,800 h, Functionality: fully functional, machine/vehicle number: 0-250-04-2333, travel distance X-axis: 3,310 mm, travel distance Y-axis: 1,735 mm, travel distance Z-axis: 220 mm, TECHNICAL DATA Fsleuh Uyqeq Eg Tqogb Table length: 2750 mm table width: 1050 mm Workpiece thickness: 100 mm X-axis: 3310 mm Y-axis: 1735 mm Z-axis: 220 mm Tool holder: HSK-F 63 Magazine: 8-position plate Unit: 2 spindles Drill: (6+4) x 32 X-axis speed: 60 m/min Y-axis speed: 50 m/min Z-axis speed: 20 m/min Standard compressed air quality: according to ISO 8573-1 quality class 3 Connection: R 1/2" Pressure in the supply line: 7 bar Compressed air consumption: approx. 100-200 l/min Suction connection: Ø 200 mm Height: 2110 mm Total extraction capacity: min. 3170 m³/h Air speed: min. 28 m/s Pressure loss: min. 2000 Pa MACHINE DETAILS Loading dimensions: 5400 x 2300 x 2400 mm Machine weight approx.: 3600 kg Protection class: IP53 Operating voltage: 3 x 400 Volt, ±5% Frequency: 50 Hz External power supply: 32 A Recommended fuse: 35 A Total connected load approx.: 17.5 kW FUNDAMENT Surface pressure: in the area of the support points 1.2 N/mm² Floor covering: concrete quality B25, compressive strength ≥ 200 mm

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,857 h, Functionality: fully functional, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, number of slots in tool magazine: 72, TECHNICAL DETAILS Travel: 4,400 x 1,300 x 180 mm Milling unit power: 15 HP Fgolq Eg Teuf Tpfeqeb Tool change: automatic Number of tool positions: 3 x 24 slots EQUIPMENT - Work table with traverse - Auxiliary unit for heavy parts - Pneumatic clamps for door and window production - Vacuum pump 250 m3/h - Automatic lubrication - Conveyor for waste

Condition: repair required (used), Year of construction: 2000, Functionality: not functional, There are issues with PLC. Need to be rapaired. Folq Eovc D Dasg Tqjgb

Condition: new, Functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, overall weight: 1,500 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, CNC portal milling machine Industry 2500 x 1300 Working area: 2500 x 1300 x 200 mm depending on equipment from €11000,- excl. VAT. CNC portal milling machine Industry 3000 x 1500 Working area: 3000 x 1500 x 200 mm depending on equipment from €12900,- excl. VAT. Fgjlq Eg Toukgwujqsb

Condition: good (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 4,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 180 mm, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: esa, workpiece length (max.): 4,500 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 180 mm, total height: 2,750 mm, total length: 7,000 mm, total width: 3,000 mm, table width: 1,200 mm, table height: 950 mm, table length: 4,500 mm, rotational speed (min.): 24,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 5,000 kg, spindle speed (min.): 24,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 7,500 W, number of spindles: 2, number of slots in tool magazine: 10, tool mount: 200 mm, tool length: 200 mm, tool diameter: 150 mm, tool weight: 5,000 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Nesting cnc machine with automatic emptying of the work table. 7.5 kw main milling unit with quick tool change 10 positions 6.6 kw auxiliary milling unit with manual tool change HSK63F Saw with automatic 0-90 degree rotation Automatic lubrication Remote machine control Fjlq Eoufgg Rog Tqogb 2x vacuum pump 250m3h each

Condition: good (used), Year of construction: 2019, Functionality: fully functional, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,985 mm, travel distance Z-axis: 250 mm, table width: 3,686 mm, table length: 1,555 mm, Scm Group S.P.A. production year 2019 Cnc Processing Center. MORBIDELLI N100 Processing capacity for electric spindle along X axis 4320 mm; Processing capacity for the electric spindle along the Y axis 1985 mm; Basing table dimensions along the X axis 3686 mm, along the Y axis 1555 mm; Travel along the Z axis 250 mm; Max processing height 150 mm; Vector speed along X and Y axes 35 m/min; Multifunctional aluminum basing table; The base table is grooved with a step of 20 mm for fixing the sealing rubber; Basing table with one vacuum zone; The vacuum connection points on the base table are arranged with a step of 120 mm in the direction of the X and Y axes; The vacuum connection points can be closed with a magnetic cap (PATENTED); 3 pcs. reference point supports for basing the workpieces can be placed around the perimeter; Electric spindle with gripping cone HSK 63F with motor power 8 kW (S1 mode) / 9.5 kW (S6 mode); Rotation speed 1,500-24,000 rpm. /min; Right and left rotation; Spindle cooling with air; The spindle is prepared to take the angle heads from the tool changer; TR 10 automatic tool changer; Positions in the direction of the Y axis; Number of positions 10 pcs. for tools with a maximum length of 160 mm; Equipment remote control; MAESTRO program intended for creating a workpiece processing program. Equipment centralized lubrication hand pumps; Telesolve – device diagnostics from a distance Vacuum pump with a capacity of 250 m3/h Fgslsvw Alljq Eg Tqjb The device complies with CE European safety regulations. The device is connected to Autodesk Fusion software. Located in Riga, Latvia

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,630 mm, TECHNICAL DETAILS X-travel without gluing: 6,000 mm X-travel with gluing: 5,000 mm Y-travel: 1300 mm Y-travel with main spindle + tool diameter 20 mm: 1630 mm Y-travel with gluing: 1450 mm Setup table: Dyna Poin BIMA 410 V Fjlq Ejuh Uxaog Tqjgb Occupancy: 4 places Edge banding unit: available

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,857 h, Functionality: fully functional, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, number of slots in tool magazine: 72, TECHNICAL DETAILS Fgslq Est Ubnpeg Tqeb Travel: 4,400 x 1,300 x 180 mm Milling unit power: 15 HP Tool change: automatic Number of tool positions: 3 x 24 slots EQUIPMENT - Work table with traverse - Auxiliary unit for heavy parts - Pneumatic clamps for door and window production - Vacuum pump 250 m3/h - Automatic lubrication - Conveyor for waste

Condition: reconditioned (used), Electrospindle/Electrospindel HSD ES 330A 4P 04,50kW H1 Air cooling Fgelqeuh R Eve Eg Tqob

Condition: new, Year of construction: 2025, CNC MILLING MACHINE C2131 IND (working area 2100 x 3100 mm) dynamic and precise milling plotter based on components from global manufacturers equipped, among others, with spindle of Italian production HSD. Work table Fgelq Ejvup Unsg Tqeb Sectional table with six independent vacuum sections, made of rigid and resistant HPL panels, controlled directly from the control cabinet, Each section has holes into which the vacuum from the vacuum pump is fed via a system of tubes, The main openings in the vacuum table have plugs to accommodate different material formats, Table equipped with buffers in two axes! Pneumatic positioners to ensure that the material is always positioned in the same place, Spindle High-quality brushless spindle from a renowned manufacturer, 9 kW, powered by inverter, with overload protection . Milling electro-spindle with innovative AIR cooling system. 3.Drive Energy-efficient YASKAWA high-performance AC servo drives, controlled by a digital controller, provide excellent machining quality while maintaining high operating speeds in each direction, Brushless AC servo motors driving the X, Y axes transfer the drive via high-performance planetary gears The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The door is moved along the X and Y axes by HIWIN guide rails and bevel gears, which guarantee many years of trouble-free operation, and are made of high-quality hardened and tempered steel. Construction The rigid table structure , made of ribbed steel, excludes vibrations during the production process. 5 Tool magazine and tool measuring sensor The machine is equipped with a 12-position linear tool magazine, a set of ISO30 cones and ER32 bushings. Toolholders included: ISO30 and toolholder sleeves of size: 1/2’ - 6 pcs; 1/8’ - 2 pcs; 3-4mm - 2 pcs; 5-6mm - 4 pcs; 7-8mm - 2 pcs; 9-10mm - 2 pcs. 6 Software, INDUSTRIAL CONTROL: The machine is controlled by a SYNTEC industrial controller as in large machining centres. Included with the controller: keypad and LCD display. Optional latest software UCanCAM V12 Vacuum pump (optional) and extraction foot. The use of a vacuum pump significantly increases the clamping force of the workpieces on the machine table, so that the material does not move. The extraction foot is penumatic, located at the spindle, and allows the connection of any chip extractor, keeping the machining clean, safe and at the same time maintaining the precision of the work Technical specifications Working area 2100x3100 mm Z axis 300 mm Structure Arm in cast iron / table in welded steel Drives hybrid servo motors (AC LEADSHINE) 1500W Hybrid table Spindle power 9 kW Shimpo gearbox Spindle speed 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Repositioning accuracy 0.01 mm Linear bearing trapezoidal rails, Hiwin carriages Material clamping vacuum, hybrid Vacuum pump (optional) 7.5 kW, 8 independent vacuum sections Software (optional) UCanCAM V12

Condition: good (used), Year of construction: 2003, CONTROL SYSTEM • Numerical control: NC 1000 TECHNICAL FEATURES • Useful working area “X” (min – max): 300 – 2.500 mm • Useful working area “Y” (min – max): 250 – 700 mm • Useful working area “Z” (min – max): 13 – 50 mm WORKING UNITS • Nr. 1 + 1 Drilling units on Nr. 2 independent movable beams completed of: – Nr. 20 + 20 Vertical drilling spindles Fgelq Egoiy Eaao Tqjb – Nr. 3 + 3 Double horizontal drilling spindles in “X” – Nr. 1 + 1 Double horizontal drilling spindles in “Y” • Nr. 2 Inserting units for hinge plates and hangers

Condition: excellent (used), I sell the 2+2-head CNC working centre COSMEC NR/6. Flat nesting table. Working field 2500x1500mm 3 pumps BOSCH CNC Alpha 3/3 control system. Fgjlq Egjfh Hado Tqeb Very good condition. Possible to try. Available immediately.

Condition: new, Year of construction: 2025, CORMAK C2141 ATC PREMIUM (2100 x 4200 mm) is a dynamic and precise milling plotter based on components from global manufacturers, suitable for the toughest tasks, which works great in industrial production. Constant quality control and components used in the machine construction guarantee high quality processing of materials such as: wood, wood-like boards, MDF, OSB, PVC, HPL, plywood, plexiglass, dibond, carbon, alucobond. 1. Work table Sectioning table with four independent vacuum sections, made of rigid and durable HPL boards, Each section has holes to which negative pressure from the vacuum pump is supplied through a system of pipes, The main holes in the vacuum table have plugs that allow you to attach different formats of materials, 2. HQD spindle Brushless spindle from a renowned high-class manufacturer with a power of 9 kW , powered by an inverter, with overload protection. Milling electrospindle equipped with an innovative AIR cooling system . Adapted to automatic tool changing, which shortens machining time due to the lack of downtime associated with manual cutter change. 3.Drive Energy-saving high-end drives Leadshine servo drives with 1500W power and high holding torque (Double on the Y axis) controlled by the NK-105 G3 digital controller , they ensure excellent quality machining while maintaining high working speeds in individual directions. Brushless servo motors driving the X and Y axes transmit power via high-quality planetary gears. The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The movement of the gate along the X and Y axes is carried out by means of HIWIN guide rails and helical gear wheels, which guarantee many years of trouble-free operation and are made of high-quality hardened and tempered steel. 4. Construction The construction of the sliding gate is made of cast iron, which achieves incredible rigidity and absorbs vibrations generated during processing very well. 5. 8-tool magazine + tool measurement sensor The machine is equipped with an 8-position linear tool magazine, a set of ISO30 cones and ER32 collets The set includes holders: ISO30 and sleeves for mounting tools in the following dimensions: 1/2" - 6 pcs.; 1/8" - 2 pcs.; 3-4mm - 2 pcs.; 5-6mm - 4 pcs.; 7-8mm - 2 pcs.; 9-10mm - 2 pcs. 6. Vacuum pump and suction foot (optional) 4 independent vacuum sections. The pneumatically operated extraction foot is located at the spindle and allows for the connection of any chip extraction system, maintaining the cleanliness of the processing, safety and at the same time maintaining the precision of the work. 7. Software, INDUSTRIAL CONTROL : Control NK-105 G3 The machine supports the latest version of CAD/CAM software. OPTIONALLY The latest UCanCAM V12 software Fgolq Egovupu Us Tqjb Technical parameters Working Field 2100x4200mm Z-axis 300mm Design Arm - cast iron / table - welded steel Drives 1500W Leadshine servo drives Table T-shaped / hybrid Spindle power 9kW Spindle Air cooled HQD (oil mist optional) Spindle revolutions from 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Re-positioning accuracy 0.01mm Linear bearings trapezoidal rails, Hiwin trolleys Material fixing vacuum, hybrid Vacuum pump vacuum 2x7.5 kW (option) Software UCanCAM V12 (option) Dimensions 5070x2870x1900mm Weight 3350 kg

Condition: good (used), Year of construction: 2011, I sell the 3-axis CNC working centre HOMAG WEEKE VENTURE 106M with beam table Year 2011. Fjlqevld Epe Eg Tqjgb Configuration: 3-axis main spindle 9 KW Tool magazine 9 positions HSK63 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 3050 x 1260mm. 2 working fields, 2 clamping areas Automatic central system of lubrication. Software WoodWop 6.0 with full instructions. Pump BECKER 110m3/hr. Good condition. Available immediately.

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X,Y,Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. CNC milling plotter CORMAK C2040 is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass, dibond and metals. The plotter is mainly intended for use in the furniture and modeling industries. Dissecting table with four independent vacuum sections with dimensions of 2100x4000 mm. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2100 x 4000mm, Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor Linear bearings: trapezoidal rails, Hiwin carriages Spindle High-quality brushless spindle that is characterized by durability. Additionally equipped with an innovative AIR / not liquid cooling system! The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Fjljvupr Toq Eg Tqogb Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing Digital Signal Processing The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2100x4000mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1580 kg Machine dimensions 2270x4570x2200mm Table height 715mm Guides linear Vacuum Pump 7.5kW or 5.5kW (optional) Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: good (used), Year of construction: 2000, I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table Year 2000. Configuration: 3-axis main spindle 7,5 KW Tool magazine 4 positions HSK63 1 grooving saw X-direction Drilling head 9+2 spindles Useful working area 2300 x 1000 x 130mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump RIETSCHLE 2,2 KW Fgolqjtt Sy Ho Eg Tqeb Good condition. Available immediately.

Condition: new, Year of construction: 2025, CORMAK C2131 ATC PREMIUM (2100 x 3100 mm) is a dynamic and precise milling plotter based on components from world manufacturers, suitable for the heaviest tasks, which is perfect for industrial-scale production. Constant quality control and the components used in the machine's construction guarantee high quality processing of materials such as: wood, wood-like boards, MDF, OSB, PVC, HPL, plywood, plexiglass, dibond, carbon, alucobond. 1. Work table Sectioning table with FOUR independent vacuum sections, made of stiff and durable HPL plates, Each section has holes to which negative pressure from a vacuum pump is supplied through a pipe system, The main holes in the vacuum table have caps that allow you to attach various formats of materials, 2. HQD spindle Brushless spindle from a renowned high-class manufacturer with a power of 9 kW , powered by an inverter, with overload protection. Milling electrospindle equipped with an innovative AIR cooling system . 3.Drive Energy-saving high-class drives Leadshine servo drives with 1500W power and high holding torque (Dual on the Y axis) controlled by the NK-105 G3 digital controller ensure excellent quality machining while maintaining high working speeds in individual directions. Brushless servo motors driving the X and Y axes transmit power through high-class planetary gears. The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The gate is moved along the X and Y axes using HIWIN guide strips and helical toothed gears, which guarantee many years of failure-free operation and are made of high-quality, hardened and hardened steel. 4. Construction The structure of the sliding gate is made of cast iron, which achieves incredible stiffness and absorbs vibrations generated during processing very well. 5. Magazine for 8 tools + tool measurement sensor The machine is equipped with an 8-position linear tool magazine, a set of ISO30 cones and ER32 bushings The set includes holders: ISO30 and sleeves for mounting tools with dimensions: 1/2" - 6 pcs.; 1/8" - 2 pcs.; 3-4mm - 2 pcs; 5-6mm - 4 pcs; 7-8mm - 2 pcs; 9-10mm - 2 pcs. Each CNC milling machine is equipped with a precise Z-axis tool height sensor, which eliminates time for measurement corrections after each tool change. 6. Vacuum pump and extraction foot The use of a vacuum pump significantly increases the clamping force of the processed details on the machine table, thanks to which the material does not move. 4 independent vacuum sections. Technical parameters Workspace 2100x3100mm Z axis 300mm Construction Arm - cast iron / table - welded steel Drives Leadshine servo drives with a power of 1500W Table tee/hybrid Spindle power 9 kW Spindle Air-cooled HQD (oil mist optional) Spindle revolutions from 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Re-positioning accuracy 0.01mm Linear bearings trapezoidal rails, Hiwin bogies Fixing the material vacuum, hybrid Pump vacuum 2x7.5 kW (optional) Software UCanCAM V12 in Polish language version Dimensions 4070 x 2870 x 1900 mm Fgslqjvupcro Eg Tqsb Weight 2050 kg

Condition: good (used), Year of construction: 2009, I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table Year 2009. Folqjtt S D Rs Eg Tqsgb Configuration: 3-axis main spindle 6 KW Tool magazine 8 positions HSK63 1 grooving saw X-direction Drilling head 16+4+2 spindles Useful working area 3200 x 1060 x 378mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump BECKER 250 m3/hr. Good condition. Available immediately.

Year of construction: 2008, Condition: excellent (used), I sell the double side throughfeed CNC working centre Biesse Skipper 100 Year 2008. Very productive and fast. Automatic infeed table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per side: Felq Eg Toq Diw Asqegb Milling head 3,5 kW, 7000-18000 rpm 29+8+2 Drilling heads 1 Grooving saw D.150mm X-direction Software BiesseWorks. CD included. Version with outfeed table. Condition very good ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Year of construction: 2008, Condition: like new (used), I sell the throughfeed nesting CNC working centre Biesse Excel NBC 712 X1-S Year 2008. Very productive and fast. Automatic infeed table. Working area 3730x2200mm Configuration: Fgolq Eg Tofwvppjqeb Milling head HSK63 12kW, 1000-24000 rpm, independend Z-axis liquid cooling with the 8 position HSK63 magazine 16+8+4 Drilling heads 1 Grooving saw D.150mm 2-position X/Y 1 Revolving electrospindle with cutting aggregate liquid cooling Software BiesseWorks Advanced + Biesse Nest. CD included. Pumps 3pcs. BUSCH 3x 300/360 m3/hr. Condition like new ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Year of construction: 2010, Condition: like new (used), I sell the radius copy milling aggregate for edges suitable for CNC working centres with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12.000 rpm. Radius R2mm. HSK63 holder. Available immediately. Fjlq Egjhw Db Is Tqegb

Year of construction: 2006, Condition: excellent (used), I sell the double side throughfeed CNC working centre Biesse Skipper 100 Year 2006. Very productive and fast. Automatic infeed table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per side: Milling head 3,5 kW, 7000-18000 rpm 29+8+2 Drilling heads 1 Grooving saw D.150mm X-direction Software BiesseWorks. CD included. Condition very good ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included. Fgslq Egjhlhigj Tqsb Repairs required: 1 safety carpet

Year of construction: 2000, Condition: excellent (used), I sell the 4-axis milling head CNC working centre HOMAG Joker BAZ41 with beam table, year 2000. Configuration: 1x 4-axis main spindle 12kW S6 750-18.000 rpm water cooling ! Tool change chain system 12 Posizions HSK63 Drilling head 12 spindles in Z-direction Useful working area 3225x1660mm x Z 450mm. 2 working zones Automatic system for central lubrication WoodWop 4.5 software. CE and full documentation included. Fully working with all working heads and equipment. Felqeg Im Dke Eg Tqogb Without Pump ! Available immediately.

Condition: good (used), Year of construction: 2012, I sell the 5-axis CNC working centre Biesse Rover C6.40 with beam table, year 2012. Configuration: Fslq Eoq Dkc Sjg Tqogb 5-axis main spindle HSD 15KW/S6 (12KW/S1) / Water cooled Tool magazine 22 positions HSK63 on moving head Drilling head 5+2+2 spindles Useful working area 3400x1570mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Automatic system for outfeed of waste material with band conveyor Additional vacuum outputs for raster works or connection of additional clamping devices. Pump Becker 250/300 m3/h. 5,5KW. Biesse Works software controller with full instructions. Total power 40kW Total weight 5100kg Good condition. Available immediately.