Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 11134, Used HUNDEGGER K2-625. CNC DESIGNED FOR MACHINING OF WOODEN BEAMS Loading area with 7 transversal motorized chains. Maximum length of beams at infeed: 13.000 mm Maximum length of beams at exit: 12.000 mm 2 independent grippers for transport and positioning: "two-hand" system. Maximum working cross-section 625 mm x 300 mm Disk saw unit, diam. 800 mm. 4 axes. UNIVERSAL milling cutter unit with double exit. 4 axes. Upper vertical milling unit. Lower vertical milling unit. Lower vertical drilling unit with multipurpose support. Horizontal drilling unit with multipurpose support. Horizontal long chain sprat unit, 900 mm, with counter-support system. Hydraulic unit for automatic beam turning with maximum cross section 440 mm x 300 mm. Unloading area with 6 arms for the parking and storage of the pieces. Spare tools included Cjlq Esv Invksg Tqerb Independent control panel. CE STANDARD Used machine, registration number 11134 and year of manufacture 2001, in perfect working condition.

Condition: like new (used), BEVEL GEARBOX WITH ISO 30 COUPLING FOR BIESSE MACHINE Celq Eoupzktog Tqerb

Condition: excellent (used), C.N.C. WORKING CENTER 4 axes (X-Y-Z-C) Cjlq Egsvxhnuj Tqerb Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP / IMATRONIC - BIMA Fast Cut Working table with pods and rails. No. 8 Supports (rails) of length mm 1400 Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 4200 x 1600 x 60 Min. workpieces dimensions (X - Y - Z) mm 295 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 4250 x 2200 x 60 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 28 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 14,5 (S6) / Kw 7,5 (S1) N° 3 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) N° 5 Air cushion tables (for the panel parking before being processed) Vacuum system with suction cups (controlled by CN) to lift panel onto outfeed belts Workpieces Outfeed system (from Bima Cut) with system with motorized belts

Condition: repair required (used), Year of construction: 2012, Functionality: fully functional, spindle speed (max.): 24,000 rpm, input voltage: 400 V, Machine in good condition, spindle to be repaired Machine price loaded on truck. Spindle repair possible on estimate Assembly possible on estimate Crjljvrtkhoq Eg Tqob

Year of construction: 2023, Condition: new, machine/vehicle number: MR005063, Maximum technology with limited space requirements. Four-axis CNC machine with bumper protection, to be used for panel machining and solid wood. Machine with industrial designed frame, heavy duty, maximum precision on operations. Equipped with Easy2Go modern interface.Machine is equipped with the following options: - Machine conforming to CE regulations - Automatic lubrication system - Suction hood main motor 3-position adjustable - Tool length control Technical specifications: - Maximum panel thickness : 180 mm - Maximum panel length : 3115 mm - Maximum panel width : 1320 mm - Machine table : Beams with vacuum cups - Safety system : Bumper protection - Number of drilling spindles vertical : 12 piece - Number of horizontal drilling spindles (over Y-axis) : 2 piece Crelqjqw U D Rj Eg Tqob - Number of horizontal drilling spindles (over X-axis) : 4 piece - Power milling motor : 13 hp - Milling spindle change : HSK63F - Tool changer positions : 11 piece - Milling spindle speed : 24000 /min - Tool length measuring system : Yes - Serial number : AH00006001

Condition: like new (used), knife: diamond (PKD) manufacturer number: 10218944 & 10216339 flight circle (ø): 18 mm length: 43/100 mm material: steel Crelq Eg Tevncqpeqob Labelling: MEC

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, BIESSE ROVER B7.65 R FT MACHINING CENTER Fully PC-based XP6OO control system. Crslq Egott Smds Tqjb Division into 2 shaping areas and 8 X-shaped clamping areas 2 x 300m3/h vacuum pumps Configuration 1 X=6450mm Y=1592mm Z=180mm Composition B1-P1 12kw electrospindle, HSK F63 air-cooled prisms -360° swivelling operator device - C axis 12-position revolver tool magazine on Z carriage Predisposition for mechanical copier 5 HSK F63 ERC 40 Leitz tool holders with spring clamps Automatic lubrication system - Diagnostic video Oil-bath sawing aggregate for 215mm blade Menzel air-oil sprayer

Condition: excellent (used), CNC-Gantry Flexible Automatic through-feed Boring Machine with Dowels inserting system Movable panel (horizontal position of workpiece/panel), movable working head Numerical Control Power Control, Software WoodWOP Overall integral safety cabin (enclosure) of the machine Panels (workpieces) feeding by motorized belts 3 Feeding speed (m/min) 1 - 90 (ca.) Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1400 x 60 Celsd Nvi Djq Eg Tqjrb Maximum stroke of the axis (X - Y - Z) mm 3580 x 1838 x 125 Two panels simultaneously processables (in Y axe) mm 600 + mm 600 Total installed power (Kw) 38 WORKING GROUPS (TOP): Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 38 + 3 special Independent horizontal boring spindles (No.) 6 Circular Grooving Saw (on X axis) dia. (mm) 100 Vertical electro-spindle (No.) 1 x SK 30 (Vertical electro-spindle motor power (Kw 6) Automatic Tools Changing System, Tools storage plate (No. 3 folds- positions) WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles (No.) 2 Horizontal drilling spindles - Right side (No.) 13 + Left side (No.) 13 Inserting nozzle and glue injectors (Right side) No. 2 + (Left side) No. 2 Storage tanks for automatic feeding of the dowels (No.) 1

Condition: good (used), HOMAG VENTURE 10 XL MACHINING CENTER MAX. PART LENGTH 6000MM MAX. WIDTH 1525MM MAX. THICKNESS 300MM 15KW MAIN SPINDLE WITH C-AXIS Crslq Egouk Dp Ij Tqsb 18-POSITION TOOL CHANGER 4KW VERTICAL DRILLING MOTOR HEAD 17 SPINDLES, 4 HORIZONTAL + 0/90° SAW WOODWOP PACK FOR DESKTOP PC

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 5 axis (ROBOT head) Goose-neck type Numerical Control ICOS CNC - Software IMAWOP / (OPTION IMAwinCAD) Safety cabin (enclosure) of the working head Working table with pods and rails- No. 8 Support rails LED system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Crolq Eg Tjfin Sajqjb Automatic Tools Changing System No. 2 Tools storage plates (No. 8 folds) + (No. 18 folds) Max. useful working area (X - Y - Z) mm 4300 x mm 1300 (mm 1410) x mm 350 No. 2 Working areas - Vacuum pump (capacity m3/h) 140 Separate electric and command cabinet. Total installed power (Kw) 23 WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles No. 4 Independent horizontal boring spindles Drilling head motor-power (Kw) Kw 1,2 x 4 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 No. 1 Vertical electro-spindles ROBOT (HSK F63), motor power KW 9 Independent Z-axis with a stroke of 650 mm Axis A arranged / assembled at an angle of 90° to the C axis. Rotating range of the C-axis 420°, rotating range of the A-axis 140°

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control IMATRONIC 231 (IMAWOP) Max useful working area (without edge banding process) mm 5000 x 1630 x 100 Max useful working area (edge banding process) mm 3900 x 1450 x 60 (panel thickness) No. 8 movable rails (supports) length mm 1200 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 140 m3/h) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process Cjlq Eofbmqteg Tqorb No. 2 Vertical Electro-spindles HSK F63 (1 x Kw 11 + 1 x Kw 7,5) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 6 Independent horizontal boring spindles (1 x Kw 3) Banding group on board - Glueing Unit (Hot Melt Glue) VT 50 Edge coils supporting unit (No. 6 reels) OPTIONALS: No. 1 Circular Saw to cut and for grooving - max diam mm 200 (90°) No. 1 Aggregate Flush-Trimming/Scraping Unit No. 1 Cross aggregate with No. 4 horizontal boring spindles

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 5 axis (DRIVE 5C +) Gantry-drive (axe X) machine Numerical Control Control (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 10 Table dimensions (mm) 1250 Clamps for workpieces fixing - Pneumatic Kit powerClamp-clamping element - K Table Automatic Tools Changing System Tools storage plate (No. of folds-positions) 14 Max. useful working area (X - Y - Z) mm 6175 x max mm 1550 x mm 300 Colsnzhwhoq Eg Tqorb N° 2 Working areas - Vacuum pump (capacity m3/h) 2 x 100 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes. Total installed power (50 A) WORKING GROUPS (TOP): N° 9 Independent vertical boring spindles (High Speed 7500) N° 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 1,5 N° 1 Vertical electro-spindles HSKF63 DRIVE 5C +. Vertical electro-spindles motor power (KW 10)

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control PC85 - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 10 Support rails (lenght mm 1500) LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 folds) + (No. 3 folds) Max. useful working area (X - Y - Z) mm 6000 x max mm 1600 x mm 125 No. 4 Working areas - 2 x Vacuum pump (capacity m3/h) Separate electric and command cabinet Total installed power (Kw) 27,5 (ca.) Celq Esr Ai Sqjg Tqjrb WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles (High Speed 7500) No. 10 Independent horizontal boring spindles (No.6 in X-axe + No. 4 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. Vertical electro-spindle: HSK63 Vertical electro-spindles motor power KW 9

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PowerControl (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machines with clamp grippers faster. Crslq Egjlkdpmo Tqsb In-feeding working table (panel support) and Out-feeding table (with motorized belts) With pushing system to automatically infeed the workpiece Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 2500 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y)

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), movable working head. Vertical position of the panel (workpiece) Numerical Control TPA - Software Albatros Safety cabin (enclosure) of the working head Panels feeding by motorized chain/track Rubber-coated vertical rollers as fence and feeders during workpieces process In-feeding table (with motorized belts) - Out-feeding table (with motorized belts) With workpiece return system to the operator (180°) Colq Esihfiisg Tqorb Min. useful working area (X - Y - Z) mm 260 x 40 x 10 (ca.) Max. useful working area (X - Y - Z) mm infinite x 1300 x 80 (ca.) Separate electric and command cabinet Total installed power (Kw) 35 WORKING GROUPS: Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 24 (7 in X + 17 in Y) Drilling heads with horizontal spindles (No.) 2 Independent horizontal boring spindles (No.) 36 (9 LEFT + 9 RIGHT = 18 x 2) Drilling head motor-power (Kw) 3 x 3 (ca.) Vertical electro-spindle (No.) 1. Vertical electro-spindle motor power (Kw) 7,5 (ca.) Automatic Tools Changing System Revolver, with Tools storage plate (No. of folds-positions) 10

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS OPEN 231. Software IMAWOP Portal Loading and Unloading System No. 2 Working tables (with pods and rails), each one with No. 4 Support rails (tot. 8) DYNAPOINT Colq Eg Tetixqkjqorb LED system on the rails for the vacuum pods positioning (Y-axe) and on the basement for rails (X-axe) Automatic Tools Changing System. Tools storage plate (No. 2 x 18 of folds-positions) Max. useful working area (X - Y - Z) mm 5100 x 1400 x 180 Workpieces dimensions (X - Y - Z) 2 x (mm 2350 / 2200 x 1400 x 60) (N°) 2 Working Areas 2 x Vacuum pump (capacity m3/h). Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles (Drilling head motor-power: Kw 4 ca.) No. 1 Vertical electro-spindle (HSK F63) with motor power (Kw) 18. With C axe, 360° No. 1 Edge Banding unit (always ready on board) VT 100. Glueing Unit (Hot Melt glue) Edges (tape) thickness in rolls (min/max) mm 0,4 / 3. Edge coils supporting unit (No. 2 reels) No. 2 Pre-End cutting (pre-snipping) Unit OPTIONAL: Circular saw aggregate (diam. mm 200) OPTIONAL: Combined aggregate (Flush-Trimming/Scraping) OPTIONAL: Drilling Aggregate (with 4 horizontal boring spindles)

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with DRIVE 5 C+) Gantry-drive (axe X) machine Numerical Control PC 85 (IPC PowerPack) Software WoodWOP (Paket. Wizzard, Motion, ecc.) Safety cabin (enclosure) of the working head Working table with pods and rails Mod. AP . No. 12 Support rails (length mm 1300) Automatic deplacement by CNC (X axis) of the Supports rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System (Chain) Tools storage plate (No. of folds-positions - 72) Max. useful working area (X - Y - Z) mm 7400 (7575) x mm 1100 (1325) x mm 600 No. 2 Working areas - Vacuum pump (capacity m3/h) 300 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet WORKING GROUPS (TOP): No. 20 Independent vertical boring spindles (‘MPU’ head swivelling 185°) No. 10 Independent horizontal boring spindles (‘MPU’ head swivelling 185°) N° 1 Circular Saw diam. (mm) 200 (‘MPU’ head swivelling 185°) Drilling head motor-power (Kw) 2,3 No. 1 Vertical electro-spindle: DRIVE 5C+. Vertical electro-spindles motor power (KW 15) OPTIONAL: N° 1 ROBOT - KUKA KR 120 / 3900 / ULTRA K Celq Eg Teu Td Steqjrb LIGMATEC RKT100 Panel infeed and outfeed system Crosshead aggregate (4 horizontal drilling spindles) Clamps for workpieces fixing

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head. Horizontal position of the panel (workpiece) Numerical Control Xilog Plus 2 (Software Xilog Plus 2) Safety cabin (enclosure) of the working head. Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) With pushing system to automatically infeed the workpiece In-feeding table (with motorized belts) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 250 x 70 x 10 (2 x 5 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1300 x 80 (2 x 40 mm) Two (2) panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Crjlq Eefz I Ufeg Tqeb WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Inserting nozzle and glue injectors. Storage tanks for automatic feeding of the dowels

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type - Front emergency carpets Numerical Control Type PowerControl PC 85 - Software WoodWop No. 10 Supports/Rails (mm 1340) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store at No. 18 folds) Max. useful working area (X - Y - Z) mm 6175 x 1550 x 60 Max. useful working area (X - Y - Z) in edge banding mm 6000 x 1475 x 60 No. 2 Working areas - No. 2 Vacuum pumps (capacity m3/h 100 each) Motorized carpet to evacuate the wastes from the working process Total installed power KW 27 Working groups (top) No. 17 Independent vertical boring spindles (power of the drilling head Kw 2,2) No. 4 Independent horizontal boring spindles No. 1 Vertical main Electro-spindle HSK F63 Kw 11 No. 1 Circular Saw 0°-90°) diam. (mm) 125 No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 2 reels/Coils) Cslqoh Ucn Rj Eg Tqorb

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP + IMAwinCAD Working table with pods and rails. No. 6 Supports (rails) of lenght mm 1450 - DYNAPOINT Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 6300 x 1450 x 100 Min. workpieces dimensions (X - Y - Z) mm 320 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 5600 x 2100 x 38 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 34 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 18 (S6) Circular Grooving Saw (90°) diam. (mm) 200 Edge Banding unit (always ready on board) - VT 100 Edge coils supporting unit (No. 2 reels) Combined aggregate (Flush-Trimming/Scraping) Workpieces Infeed system (to the Bima Cut) with Brush Table N° 6 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) Crslqjtixpuj Eg Tqjb Workpieces Outfeed (from Bima Cut) With motorized Rollers + Angular Transfer System

Condition: excellent (used), "NESTING" CELL with 4-axes (X-Y-Z-C) CNC working Center, composed by: K09040A) AUTOMATIC LOADING/IN-FEEDING SYSTEM (type B) also for thin panels, with scissor table, movable arm (Sweeping Arm) with vacuum suction cups, K09040B) CNC "nesting" (flat table) "BIESSE" Mod. Rover A - FT 1531 Gantry-drive (axe X) machine Numerical Control BH660 (WRT) with Software bSolid (3D CAD-CAM) + bNest Safety cabin (enclosure) of the working head Bumper Unique flat working table FT Automatic Tools Changing System with two (2) Tools storage plates 1st Tools storage plate with 16 folds (on X axe) + the 2nd (revolver-type) with 8 folds (on Y-axe) Min. useful working area (X - Y - Z) mm 3100 x 1560 x 170 No. 8 Working areas (Multizone) - No. 3 Vacuum pumps (capacity 250 m3/h each) Separate electric and command cabinet - Total installed power (Kw) 39,45 WORKING GROUPS (TOP): No. 10 Independent vertical boring spindles (5 in X + 5 in Y) Celq Eg Tsifz Smeqjrb Drilling head BH 10 motor-power (Kw) 3 No. 1 Aggregato HSK F63 as Circular Saw (max. diam mm 215) No. 1 Vertical electro-spindle HSK F63 (C-axe at 360° - MK259), motor power (Kw) 19,2 K09040C) AUTOMATIC OUT-FEEDING SYSTEM (type 1536) with motorised belt (length mm 4410)

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding process) mm 3100 x 2000 x 100 Max useful working area (edge banding process) mm 3100 x 1925 x 60 (panel thickness) No. 6 movable rails (supports) length mm 1400 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 250 m3/h) Safety side metal grids and front emergency carpets No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) No. 14 Independent vertical boring spindles (2 x Kw 1,2) Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles + Circular saw (diam. mm 125) Banding group on board - Glueing Unit (Hot Melt Glue) VT 100 Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate "FLEX 5" Mod. VARIO NC No. 1 Aggregate Flush Milling / Trimming Crjlq Eg Tsq Nmutsqsb No. 1 Aggregate Flush-Trimming / Profile Scraping Unit No. 1 Bar Code Reader

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control. Software Safety cabin (enclosure) of the working head. Front emergency carpets Working table with pods and rails TV. Support rails (No.) 12 Digital quota display (X Axis) for the pods and rails Max. useful working area (X - Y - Z) mm 6700 x 1900 x 100 Max. useful working area (X - Y - Z) in edge banding (mm) 6700 x 1600 x 60 Max. stroke of the axis (X - Y - Z) mm 8281 x 2640 x 250 No. 2 Working areas (2 x mm 2800) Vacuum pump (capacity m3/h) Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Colqog Urmys Eg Tqorb No. 1 Vertical Electro-spindles HSK63F (1 x Kw 13) No. 18 Independent vertical boring spindles No. 8 Independent horizontal boring spindles Automatic Tools Changing System, with 18 folds (places) Banding group on board - Glueing Unit (Hot Melt Glue) Edges (tape) thickness in rolls (min/max) mm 0,5 / 3 Edge coils supporting unit (No. 2 reels) Pre-End cutting (pre-snipping) Unit OPTIONALS: No. 1 Circular Saw to cut and for grooving No. 1 Aggregate Flush-Trimming/Scraping Unit

Condition: excellent (used), C.N.C. WORKING CENTER with 5 axes (X-Y-Z-C-5) routering, boring, cutting and edge banding Goose-neck machine - Front emergency carpets Safety cabin (enclosure) of the working head Numerical Control Type ICOS CNC - Software IMAWOP Cslqehu U Nxe Eg Tqorb Working table with pods and rails (No. 8 rails x mm 1400) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store with No. 18 positions) Useful working area (X - Y - Z) mm 4000 x 2100 x 300 Useful working area (X -Y - Z) in edge banding mm 4000 x 1800 x 60 Nr. 2 Working areas - Vacuum pump / capacity (m3/h) 140 Motorized carpet to evacuate the wastes from the working process Separate electric and command cabinet - Total power installed Kw 32 Working group (top head) Nr. 21 Independent vertical boring spindles (4 X Kw 1,2) Nr. 1 Vertical Electro-spindle HSK F63 ROBOT (Kw 16) Edge Banding group (ready on board) with Glueing Unit (Hot Melt) VT 100 Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Edge coils supporting unit (Nr. 2 reels) OPTIONALS: Circular saw aggregate (diam. mm 200) Combined aggregate (Flush-Trimming/Scraping) Drilling Aggregate (with 4 horizontal boring spindles)

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) - Goose-neck type - Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) - Numerical Control with Software Biesse Works - Safety cabin (enclosure) of the working head - Front emergency carpets - No. 1 In-feeding table (with motorized belts) SX - No. 2 Workpieces fixing clamps (for the panels introduction in the working area) - No. 1 Out-feeding table (with motorized belts) DX - Max. useful working area (X - Y - Z) mm 3000 x 1000 x 60 - Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (for longer panels than mm 2000, minimum thickness is mm 13) - Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1000 x 60 - Total installed power Kw 20 BOTTOM WORKING UNITS: Colq Eg Tedh Tf Uoqsrb - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe) TOP WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe)